sample conditioning - sentry equip · waters equipment® w3000 grab sample stations are ideal for...
TRANSCRIPT
Waters Equipment® W3000 grab sample stations are ideal for conditioning and collection of industrial-type boiler water samples. These units contain a sample cooler and all accessories required to properly control cooling water and sample flows.
MODELS
W3000
BENEFITS
The W3000 grab sample station's cooling water pressure gauge and sample flow indicator allow optimum control of both flows to extend cooler life and eliminate overheating of the sample and cooler. With the stainless steel sample sink, cleaning and housekeeping are simplified – the corrosion-resistant sink holds grab sample bottles and routes unused sample continuously to the drain.
Only four connections – cooling water, sample and drain – are required for complete installation. And the all stainless steel construction is rugged and durable, resisting corrosion.
FEATURES
�� The grab sample stations are pre- packaged and include:
�� A Waters Equipment W9000 sample cooler
�� Sample sink
�� Cooling water pressure gauge
�� Sample shut-off valve
�� Sample pressure reducer
�� Sample flow indicator
�� The grab sample stations are compact at 10 inches wide by 22 inches high, and weigh 20 lbs.
�� Stations normally are in stock and available for same day shipment
S A M P L E CO N D I T I O N I N G
WATERS EQUIPMENT W3000 GRAB STATION Single Line Conditioning Modules
Gas
Liquid & Slurry
Solid & Powder
Steam & Water
sentry-equip.com
966 Blue Ribbon Circle North, Oconomowoc, WI 53066 U.S.A. | +1-262-567-7256 | [email protected]
© 2016 Sentry Equipment Corp. All rights reserved. All product and company names are property of their respective owners. It is solely the responsibility of end users, through their own testing and analysis, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied and properly maintained, and to limit their use to their intended purpose. Improper selection, installation or use may result in personal injury or property damage.
W-SW-SPS-00023-1 3-16
SPECIFICATIONSsample pressure up to 1000 psig (69 barg)
sample temperature up to 450°F (232°C)
sample flow up to 1000 cc/min
cooling water pressure 35 to 150 psig (2.4 to 10.3 barg)
cooling water temperature up to 100°F (38°C)
cooling water flow 1 to 3 gpm (3.8 to 11.4 lpm)
WAT E R S E Q U I P M E N T W 3000 G R A B S TAT I O N > S I N G L E L I N E CO N D I T I O N I N G M O D U L E S > S A M P L E CO N D I T I O N I N G