salient characteristics / approvals non-illuminated switches illuminated switches pilot lights

Salient characteristics / ApprovalsSalient characteristics / Approvals

Non-illuminated SwitchesNon-illuminated Switches

Illuminated SwitchesIlluminated Switches

Pilot LightsPilot Lights

Contact ElementsContact Elements

Control & Signalling Devices Control & Signalling Devices 22.5 Plastic Series22.5 Plastic Series

Salient characteristics / ApprovalsSalient characteristics / Approvals Economy of Space

Aesthetically elegant

Simple to fix

Fixing method unaffected by excessive vibration

Fixing method such that actuators are interchangeable

Fixing distance 30mm x 40mm

Conforming StandardsConforming Standards ApprovalsApprovals

Degree of ProtectionDegree of Protection Ambient TemperatureAmbient Temperature

CSA C22.2 No 14-95

UL 508

EN 60497-5-1

CSA, UL, VDE 0660

IP 65 as per IEC 529

NEMA 4 x 12 as per UL 50

-25C to + 70C

Non Non IIlluminated Switcheslluminated Switches

Types of Actuators:Types of Actuators:

Flush

Projecting

Booted

Relay Reset

Mushroom• Head 40 / 60 / 30• Momentary• Latching• Push-pull• Key lockable• Trigger type

Selectors Selectors

Maintained contact 2 pos. or 3 pos

Spring return 2 pos. or 3 pos

Standard knob / Extended knob

Key Selectors Key Selectors

Maintained contact 2 pos. or 3 pos

Spring return 2 pos. or 3 pos

Key removable in different positions

Twin Actuator Twin Actuator

Non Non IIlluminated Switcheslluminated Switches

Types of ActuatorsTypes of Actuators

Flush

Projecting

Selector • 2 pos. or 3 pos. maintained contact• 2 pos. or 3 pos. spring return

Twin illuminated

Types of Lamp Holders for above Illuminated Actuators Types of Lamp Holders for above Illuminated Actuators

Filament Bulb

Integral LED

LED Bulb

IIlluminated Switcheslluminated Switches

Lamp holders for Lamp holders for IIlluminated Switcheslluminated Switches

Filament BulbFilament Bulb

Direct connection up to 380V

With resistor suitable for 24V, 48V, 110V and 230V AC/DC

With resistor and diode suitable for 240V AC

Bulb BA9S, 2 - 2.6 watts

LED Lamp HoldersLED Lamp Holders

Advantages of LED v/s FilamentAdvantages of LED v/s Filament Bulb Bulb

LED Filament Long life up to 100,000 hrs

Very low power consumption 0.5 watts

Nominal change in temperature of the body above ambient

Normal life up to 2000 hrs

Power consumption varying between 2 – 5 watts

The body of the lamp holder gets heated up to 60º C above the ambient.


Integral LED lamp holdersIntegral LED lamp holders

LED’s fixed, cannot be replaced

LED’s available with different colours

Current consumption max. 20 mA

Short circuit protection with built in fuse (optional)

Voltage limits ± 20% of rated voltage

Low voltage glow protection up to 20 % of operating voltage

Available from 12V to 230V AC or DC, 415 V AC


LED Bulb Lamp HoldersLED Bulb Lamp Holders

BA9S LED bulbs / max. power consumption 1 watt

Different colours available

Current consumption 20 mA max

Voltage limits ± 20% of rated voltage

Available for 24V AC/DC, 110V AC/DC and 230V AC or 220V DC



Filament Bulbs

Integral LED

LED Bulbs

Universal LED

Transformer

Universal LED HoldersUniversal LED Holders Integral LED, non-replaceable

Wide band holder can be used from 24V AC/DC supply to 230V AC/DC supply

Different colours available

Lamp Holders for Pilot LightsLamp Holders for Pilot Lights

Voltages ApplicableVoltages Applicable

Incoming voltage Voltage output at bulb point

230 V230 V230 V110 V110 V110 V

06 V12 V24 V06 V12 V24 V

Transformer Type Lamp HolderTransformer Type Lamp Holder(option of Filament Bulb / LED Bulb)



Economy LED Pilot Light (modular type) with Economy LED Pilot Light (modular type) with integral LED:integral LED:This model carries all the international approvals, has the same LED’s as the regular models, but is economic in cost due to the modular construction.

In this version, we are now able to provide a dual coloured LED. It is thus possible to provide two different colour LED’s in the same lamp holder. The lamp can be offered with red and green combination, or yellow / blue combination etc.


A600 Q600 } as per CSA 22.2 No 13–95, UL508

Rating 4A 415VAC, AC 15 } as per IEC 60947-S-1-2000 0.5A 110V DC, AC 13 }


Self wiping

Mechanical life over 2 million operations

1 NO or 1 NC

Actuator mounting / base mounting

Standard Silver plated carriers

Gold plated available for low voltage, low current switching circuits < 25mA

Shrouded terminals

Salient characteristicsSalient characteristics

6 Contact elements stackable in case of individual mounting elements. 6 contact elements can be assembled incase of non-illuminated actuators and 4 contact elements incase of illuminated actuators

salient characteristics / approvals non-illuminated switches illuminated switches pilot lights

Documents