sales training outline 2006 klaus tum product manager foot switches 35 royal road flemington, nj...
TRANSCRIPT
Sales Training Outline 2006
Klaus TumProduct Manager
Foot Switches
35 Royal RoadFlemington, NJ 908-806-9400 www.altechcorp.com
• Electrical Engineer• 10 years with Altech Corporation• Product Manager of Circuit Breakers,
Busbars, Motor Disconnect Switches,Foot Switches, Sensors, Contactors,Motor Starters, Pin & Sleeve Connectors
Klaus Tum (short bio)
FM Series Foot Switches
• Small Size/High Quality• Light/Medium Duty Applications• Available in Gray, Black, or Off-White• Completely customizable with an infinite combination of cable
choices, connectors and configurations• 5 AMP, 250 VOLT AC electrical rating• Available in momentary and maintained configurations• Custom color pedals
PCFS-3M Series Foot Switches
• Compact size
• Black steel body, with or without guards
• Up to 10A, (1/2hp) / 125 VAC electrical rating
• Custom cables and connectors
• Low cost
• Made to compete with Treadlite series
FK Series Foot Switches
• Medium size• Available in Gray or Black• Higher electrical rating than FM Series• Up to 10 AMP, 250 Volt AC electrical rating• Custom cables and connectors
FL Series Foot Switches
• Medium Size/Heavy Duty• Polyamide 6.6 body, pedal and cover• Resistant against water, oil and certain chemicals• 10 AMP, 500 Volt (20 AMP, 250 Volt) AC electrical ratings
FS Series Foot Switches
• Heavy Duty/Medium Size
• Die cast aluminum body and cover; polyamide 6.6 pedal
• Snap Action or slow make-break switch inserts
• 10 Amp, 500 Volt (20 Amp, 250 Volt) AC electrical ratings
• Standard colors: gray body, red cover, black pedal– Custom color are also available
FS Series Foot Switches
• One, two and three pedal models available• All models available with or without foot guards
Potentiometer Configuration
• Available in FL/FS series• Standard configuration includes
microswitch• Available with resistance from
100 OHM to 20K OHM (10K OHM standard)
Available Accessories
• Aluminum pedals• Foot guard• Anti trip
• Foot rests• Custom cables, connectors
Contact Configurations
• Momentary (Press to start - Release to stop)• Maintained (Press pedal and release, contacts
remain in the “on” position, press pedal again and release, contacts are in the “off” position)
• Two stage (First set of contacts close, when pedalis further depressed past pressure point, second contacts close)
IEC 601-1 for Medical Applications
• Protection Level IPX8 (Immersion in water)• Limited voltage rating to 25V~ (AC)/60V (DC)• UL/CSA, VDE approved switch insert• Installed cable with special pull/bend protection
strain relief• Special, modified housing• Available with FM, FL and FS Series Foot Switches