sales blaster - m&l test

Toll Free Ontario: 1-800-263-9244 - Toll Free Calgary: 1-800-663-4779http://www.torqueproductscanada.ca

Offer Valid While Supplies Last Through June 30, 2014

Sales Blaster 2014 2nd Quarter

JOB SITE BOXESDesigned for the toughest outdoor work environmentsProduct Code Description List Price Sales Price50950 32" Wide x 19" Deep x 17 1⁄2" High $566.65 $283.35 50951 42" Wide x 20" Deep x 23 1⁄2" High $717.15 $358.60 50952 48" Wide x 24" Deep x 27 1⁄2" High $871.90 $435.90 50953 48" Wide x 30" Deep x 33 1⁄2" High $1,040.00 $520.00 50954 48" Wide x 24" Deep x 28 3⁄8" High $1,430.45 $715.25 50949 6" x 2" Swivel Caster Set $333.25 $166.65

Features• Casters weight capacity is 3500 lbs • Tough industrial powder coating finish, heavy 16 gauge steel construction • Recessed and concealed locking area protects padlock

for ultimate security against drills and bolt cutter • Fully welded seams provide maximum strength, recessed side handles for easy transportation

Reinforced overlapping lid provides protection from weather and forced entry• Heavy duty industrial lid stays prevents accidental closure• Tread plate design for rugged durability, 50954 available in black only, all others are blue

50954 - 4 way skid entry for easy handling.

Authorized Distributor, Warranty repair and calibration facility for CDI Torque wrenches



1,153 PIECE MAMMOTH TOOL SET WITH FRACTIONAL WRENCHES AND SOCKETS ONLY

The largest tool set in the industry. Contains the following tools: Chisel and Punches, Clamps, Electrical Crimping Pliers, Files, Gear Pullers, Hammers, Hand Sockets Hex Keys, Holesaw Set, Impact Drive Tools, Impact Sockets, Knives, Miscellaneous Tools, Pliers Pry Bars, Ratchets, Drive Tools, and Accessories, Saws and Saw Blades, Scrapers, Screwdrivers Snips, Torque Wrenches, Wrenches

It’s better to have it and not need it than need it and not have it - and with this tool set, you’re almost certain to have what you need. Whatever the industry, this set will help you keep your equipment and assets working, helping you compete more effec-tively. Get your work done faster, easier, and safer with the Mammoth Tool Set from Snap-on Industrial Brands. All other tool sets are simply ordinary.

WSC-1390SAEList Price $35,754.45

Sales Price $17,877.25

TLA28NMList Price $100.90

Sales Price $57.75



TORQCONTROL - TORQUE TOOL

• 1/4” Hex Magnetic Bit Shank with 6 bits• 6 Hex Bits: 4mm (1”/2.54cm), 5mm (1”/2.54cm), 6mm (1”/2.54cm), T25 (1”/2.54cm), 6mm (4”/10.16cm), T25 (4”/10.16cm)• Turn knob to desired torque setting between 2.0 and 8.0 Nm• Torque Limiting Function Prevents Over-Tightening• Ergonomic Positive Grip L-Handle Design

Features

Applying just the right amount of torque in low-torque applications can be tricky at times. The new patent-pending TorqControl Torque Tool is an adjustable, torque limiting tool that applies torque in a range between 2 Newton Meters (Nm) and 8 Nm, indexing at every tenth Newton Meter. The tool is perfect for numerous low-torque applications, including performance bicycles, technical sporting goods, fire arms, automotive and TMPS, electronic assemblies, machine carbide inserts and more.

TLA28NMList Price $100.90

Sales Price $57.75

Turns any ordinary ratchet wrench.....

...into a highly accurate digital torque tool.

The MULTITORQ portable electronic torque meter displays torque readings from sensors that attach between sockets and driver. MULTITORQ is a highly versatile torque analyzer/data acquisition system that can be used with sockets, extensions, universal joints, ratcheting drivers or any combination of these. Sensors are sold separately, available in 8 ranges from 2-20 in. ozs. to 150-1500 ft. lb. Accuracy ± 1% of reading (± 2% reading for 20 in. oz., and 10 in. lb.) 10-100% of sensor range.

The torque analyzer features a wide angle viewing LCD display with selectable readouts; ft. lb., in. lb., in. oz., Nm, dNm, mkg, and cmkg units. Torque target settings are entered via a push button membrane keyboard. High and low torque limits are adjustable to give an audible and visual alarm. The user selects Track mode to display torque values as they are applied, or Peak mode to display the highest torque value applied.

MULTITORQ TORQUE & DATA COLLECTION SYSTEMS

Standard Set Includes:Product Code Description List Price Sales Price1600-MT MULTITORQ Unit: $ 2861.80 $ 1,430.90

MULTITORQ TORQUE & DATA COLLECTION SYSTEMS

Sensors: (sold separately)

Product Code Torque Range Drive List Price Sales Price

201-0-MT 2 - 20 in. oz. 1⁄4” $991.60 $495.75

101-I-MT 1 - 10 in. lb. 1⁄4” $991.60 $495.75

501-I-MT 5 - 50 in. lb. 1⁄4” $785.25 $392.60

2001-I-MT 20 - 200 in. lb. 1⁄4” $785.25 $392.60

1002-F-MT 10 - 100 ft. lb. 3⁄8” $785.25 $392.60

2503-F-MT 25 - 250 ft. lb. 1⁄2” $934.25 $467.15

6004-F-MT 0 - 600 ft. lb. 3⁄4” $1,232.50 $616.25

15005-F-MT 150 - 1500 ft. lb. 1” $1,693.30 $846.65

Certificate of accuracy traceable to N.I.S.T. supplied with each transducer. All components ordered separately.



INTERCHANGEABLE HEAD TORQUE WRENCHES

These interchangeable torque wrenches are designed for use on production lines and other applications where a specific torque is required for repetitive operations.

• Interchangeable heads permit ratcheting, fixed, or open end torquing capability with adjustable torque wrench bodies.

• A push of the locking pin provides quick-change action, with a wide range of head styles to choose from.

• Micrometer Type Adjustment-ensures fast, accurate settings and changes.• *Part Number 800NMIMH has Dual Pin Release for added strength• Made in USA

INTERCHANGEABLE HEAD TORQUE WRENCHES

Features

*Note: 800NMIMH new dual pin “Z” receivers accept only dual pin interchangeable heads.

Purchase an Interchangeable Head Torque Wrench and receive a FREE Ratcheting Square Drive Head.

For Free Ratcheting Square Drive Head please use Sales Blaster Order Code in chart below.

Torque Wrench Nm Ft. Lbs Head Sales BlasterProduct Code Shank Size Increments Torque Range Torque Range Product Code Order Code50NMIMH J 0.5 10 - 50 7.4 - 44.2 TCQJD8A-72 SB50NM100NMIMH J 0.5 20 - 100 14.8 - 73.8 TCQJD12A-80 SB100NM200NMIMH Y 2 40 - 200 29.5 - 147.5 TCQYD16A SB200NM350NMIMH X 2 70 - 350 44.3 - 250.8 TCQXD16A SB350NM800NMIMH* Z 5 150 - 800 110.6 - 590 TCQZD24BDP SB800NM75MFIMHSS J 0.5 N/A 5 - 75 TCQJD12A-80 SB75NM150MFIMHSS Y 1 N/A 20 - 150 TCQYD16A SB150NM250MFIMHSS Y 1 N/A 30 - 250 TCQYD16A SB250NM


Offer Valid While Supplies Last Through June 30, 2014 5

HEAVY DUTY TORQUE WRENCH1/2” Drive - 0-250 ft. lbs. - 5 ft. lbs increments• Heavy-Duty for wide range of torque applications• Non-reversible• Rubber boot around head prevents damage to wrench and equipment during use • Single scale, single direction• Positive lock with spring loaded pull down lock ring• Fast, accurate and easy to set• Easy-to-read laser marked scale• Features easy-to-use quick release button which provides good socket retention as well

as easy socket removal• Ergonomic comfort-grip• Accuracy: ± 3% of indicated value, CW, from 20% to 100% of full scale• Meets or exceeds ASME B107.14-2004, ISO 6789 standards• Individually serialized with matching certificate of calibration traceable to N.I.S.T.

Rubber boot around head prevents damage to wrench and equipment during use

2503MFRRHList Price $ 350.00

Sales Price $ 175.00

72 BIT SET

Set Includes one of each unless noted: 1/4” DRIVE • Standard: PZ2(3), PZ3(2), ST6-8(3), ST8-10(2), ST10-12(2), ST12-14, SQ2(2), SQ3(2), T30(2), T40(2), HX 5/32(2), HX 3/16(2), HX 7/32(2),

• Long: PH1, PH2(2), PH3, SQ2(2), PZ2, PZ3, T15, HX 1/4,(2) HX 5/16(2), PH1(3), PH2(4), PH3(2), T7,

T8 , T10, T15, T20, T25, T27, T30

• Nut Driver: 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16

• 1/4” Drive Hex Magnetic Bit Holder

• Plastic Carrying Case

24900List Price $ 105.00

Sales Price $ 52.50

• Ideal for use with cordless drills and screwdrivers• S2 material for higher torque, optimum durability and performance.• All parts are engineered and produced according to ANSI standard.• The set also includes a magnetic bit holder allowing for quick change of driving bits.• Folding case design is compact and robust with pivoting dual bit holders that allow for

easy and quick access to the accessories• Industrial case is made from a highly durable, plastic material



CARPENTER'S MORA MULTI PURPOSE KNIFE WITH HOLSTER

WRECKING KNIFE

MULTI TOOL

SQUEEZE GRIP SAFETY KNIFE

With HolsterProduct Code Description Length (Inches)

2444 Carpenter's Mora Multi Purpose Knife with Holster 9

Features• Multi purpose knife with high quality steel and bi-component handle.• Polished stainless steel blade.• Two component handle for comfortable grip.• Knife comes in plastic case with belt clip.• Ideal for fishermen, hunters and for working in the garden.• Sold in packs of 15 only.

With HolsterProduct Code Description Length (Inches)2448 Wrecking Knife 9

Features• The wrecking chisel knife has been designed to be used like a regular chisel or

when turned sideways a 4in wide knife.• The blade is 4mm thick and made from hardened steel and can be used like a 4in

chisel with a hammer on the back of the blade for added force.• The handle has a curved guard to protect the knuckles while in use and can also

be used with a hammer.• The wrecking knife comes in handy for all those woodworking tasks.• The knife comes complete with a holster with button clip.

2444

2448

Compact multipurpose toolProduct Code Tools Included

MTT151 18

Features• Loaded with the most versatile features, this multi tool is ready for work.• Complete with a holder with a loop to fit any belt.• Tools include scissors, ruler, cork screw, needle nose pliers. MTT151

Bi-Mold Comfort Grip Handle

Product Code Description List PriceSales Price

SQZ150003 Squeeze Grip Safety Knife $37.50 $18.75 SQZ150003-HSBL 12 Pack Hook Blades $30.00 $15.00 SQZ150005-SBL 12 Pack Trapeze Blades $13.60 $6.75

Features• Automatically loads new knife blade with the squeeze of the handle.• Quick release button to remove blade.• Includes: 6 heavy-duty blades.• Comfort handle with thumb groove for greater control and comfort.

SQZ150003

2444List Price $ 15.95

Sales Price $ 7.90


Sales Price $ 28.35

MTT151List Price $ 134.70

Sales Price $ 67.35


Offer Valid While Supplies Last Through June 30, 2014 7

FOLDING UTILITY KNIFE

AUTOLOAD QUICK-BLADE UTILITY KNIFE

UTILITY KNIFE BLADES

Uses Heavy-Duty .025" Thick 2-Notch BladesProduct Code Description40058 Folding Utility Knife

Features• Blade safely locks in place when open.• Quick-change thumb stud release allows for easy blade replacement.• Stainless steel clip secures knife on belt or in pocket.• Includes (1) .025" blade.

Includes Heavy-Duty .025" Thick 2-Notch BladesProduct Code Description40052 Autoload Quick-Blade Utility Knife

Features• Blade is easily removed or reversed from the front with push-button ease.• New blade is automatically loaded from 5-blade magazine.• Spring-loaded cover makes reloading quick and tool-free.• Includes (5) .025" blades.

Feature Heavy-Duty .025" Thick 2-Notch Blades

Product Code Description List Price Sales Price40072 Quickblade Dispenser Pack $46.75 $23.35 40076 Hook Blade 100 Count Dispenser $93.70 $46.90 40078 5 Pack Carded - 2 Notch Blades $2.35 $1.15

Features• Quickblade dispensers allow fast and safe blade handling, with convenient stor-

age for used blades.

40072


Sales Price $ 7.90 40058List Price $ 28.90

Sales Price $ 14.40

40052List Price $ 25.10

Sales Price $ 12.60



Sandflex M42

l Perfect for solids, bundles, pipes, profiles and castings.

l Multi-purpose tooth shapes for a variety of applications.

l Designed for production and general purpose application sawing.

®

Buy 5 Welded Loops and Receive a Welded Loop for FREE!!!

FREE

FREIGHT

DimensionList

Price Per Foot

Sales Price Per

Foot14/18 10/14 8/12 6/10 5/8 4/6 3/4 2/3 1.4/2

1/2 x .020 X X $4.38 $2.20 1/2 x .025 X X X X $4.38 $2.20 1/2 x .035 X X $4.38 $2.20 3/4 x .035 X X X X X $4.71 $2.35 1 x .035 X X X X X X X $5.25 $2.65 1-1/4 x .042 X X X X X $6.27 $3.15 1-1/2 x .050 X X X X X $7.50 $3.75 2 x .063 X X X X $10.84 $5.40

WELD CHARGES Width List

PriceSales Price

1/2” to 3/4” $ 14.79 $7.40 1” $ 17.48 $8.75 1-1/4” $ 19.49 $9.75 1-1/2” $ 21.35 $10.70 2” $ 25.25 $12.65

sales blaster - m&l test

Documents