saleem mother board 10
TRANSCRIPT
-
7/28/2019 saleem Mother Board 10
1/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Mother board
Manufacturing companies list of SMD ICs
1) ITE2) WINBOND3) ALI4) SMBC
Checking process : compare to ground 14%pins shows continuity.
GATES:
Inside of IC is called gates ( input,output functions). Inside of gates is 2 to 3 transistors arefunctions.
1) AND GATE
2) OR GATE
3)NOT GATE
4)NAND GATE
5)NOR GATE
AND GATE:If any one input is low so output will be low.
A B C
1 1 11 0 0
0 1 0
0 0 0
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
2/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
OR GATE:
If any one input is high so output will be high
A B C
0 0 0
1 0 1
0 1 1
1 1 1
NOT GATE:Not gates used in inventors .it require one input .if input is low output will be
high(reverse function of input side).
A y
0 1
1 0
NAND GATE:
If any one input is low output will be high.
NOR GATE:
A B Y Y1
0 0 0 1
1 0 0 1
1 1 1 0
0 1 0 1
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
3/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
If any one input is high out put will be low.
BLOCK DIGRAM OF MOTHER BOARD
System speed
FSB (front side bus)
Memory bus
MCH - Memory controller hub
A B Y Y1
1 1 1 0
0 1 1 0
1 0 1 0
0 0 0 1
CPU
NORTHBRIDGE
SOUTHBRIDGE
BIOS
RAM
I/OPORTS
IDE
FDD
AGP SORT
VGA
KEYBOARD
PCI BUS
System Controllers1.Oscillators&Timers2.Interupt Controller3.Dma Management4.Power Management
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
4/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
ICH - input/output controller hubBUS - group of wires which crries information fom one drive to another drive is
called as bus.(or)
Group of copper traces which will carry the data bits.
Chipsets :
Chipset contains the following controllers.
1) Memory controller (north bridge)2) System controller (south bridge)3) Peripheral controller (south bridge)
System controller contains the following controllers.1) Oscillators & timers2) Interrupt controllers3) DMA Mangement4) Power management
1)Oscilators & timers:
which create time base(pulse )required for micro processor,memory and the rest ofthe computer to operate.
2)interput controllers:
Which manage the hardware interputs that give priority to important functions.3)DMA management:
Which governs the data transfer to and from independently of the micro processorto free the chip upto for more important duties(like thinking)
4) Power management:
Which watches over all the electrical use of the computer to save power and innote book machines conserved batter reserves.
Pentium 111:
370
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
5/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
1. It is having ISA slot >>it is black color>>having 8-bits and 16 bits2. It is having PCI slot>>it is WHITE color>>having 82 bits3. It is having IDE1,IDE2>>40 pins connector4. It is having floppy disk drive >>34 pins connector
5. It is having DIMM RAM slot >>it is having 168 DIMM package connector6. It is having AT power supply>> 6+6=12 pins connector7. processor support 450Mhz to 1.3Ghz8. Ram support 64MB to 256Mb9. It is having AGP slot >> it is in brown color>>having 64 bits10. It is having AMR slot >> it is brown color>> having 64 bits
Pentium 1V:
1. It is having PCI slot >>it is WHITE color >>having 32 bit or yellow2. It is having IDE1,IDE2>> 40 pins connector3. It is having IDE1,SATA4. It is having floppy disk drive>>34 pings connector5. It is having DIMM RAM slot >> it is having 168 pins DIMM package6. It is having DIMM RAM slot, it is having 168 pins DIMM package7. It is having ATX, power supply>> 20 or 24 or 28 pins connector8. Processor support 1.5 GHZ to onwards9. RAM support 128 MB to 4 GB10. It is having AGP slot>> it is brown color>> having 64 bits11. It is having CNR slot>> it is brown color >>64 bits12. It is having AMR slot>> it is brown color >> having 64 bits
DDR-1------200 MHZ TO 400 MHZ-------having 184 pinsDDR 11-----400MHZ TO 800 MHZ--------having 240 pinsDDR111----800 MHZ TO 1066 MHZ------having 184 pins
Types of RAM & Abbreviation :1. SRAM static random access memory2. Classic DDRAM classic dynamic RAM3. FPM DRAM fast page mode dynamic RAM4. EDD RAM enhanced dynamic RAM5. CDD RAM cached dynamic RAM6. VRAM video ram
PGA 460
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
6/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
7. EDO RAM Extended dynamic RAM8. BEDO RAM Burst external data output ram9. WRAM Windows ram10. SG RAM synchronous graphic ram11. DDR RAM double data rate ram
12. RD RAM Rambus dynamic RAM Cache memory from 512 KB to 2 MB.Z
Abbreviations :
1. DMA direct memory access2. PGA pin grid array3. BGA ball grid array4. FDD floppy disk drive5. CGA color graphic adaptor
6. VGA video graphic adaptor7. AGP accelerated graphic port8. PCI peripheral component interface9. ISA industrial standard architecture10. MCA micro channel architecture11. EISA extended industry standard architecture12. CMOS complementary metal oxide semiconductor13. BIOS basic input output system14. USB universal serial bus15. MIPS millions of instructions per second16. MBPS mega bytes per second
17. SMD surface mounted device18. IRQ interrupt request19. IBM international business machine20. AMD advanced micro device21. SIMM single inline memory module22. DIMM double inline memory module23. RIMM rambus inline memory module24. AMR audio modem racer25. CNR communication network racer26. ACR advanced communicated racer27. NIC network interface card28. LAN local area network29. ATA advanced technology extended30. FWH firm ware hub31. AT advanced technology32. UDMA ultra direct memory access control
Input/ Output ports in mother board:
1. Serial port / mouse port ( 9 pins)2. Parallel port/ comm. Port / printer port ( 25 pins)3. USB port
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
7/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
4. VGA port5. Sound port6. LAN port7. Game port8. S- video port
9. Key board port10. LCD port
Slots in mother board :1. ISA slot 8 and 16 bits2. PCI slot 32 bits3. AGP slot 64 bits4. CND slot 64 bits5. RAM slot6. Processor slot
Pin configuration of input/output port and input/output slots:
Key board controller:
Ps2
Pin no description pin no description1. Black 1 data2. Data 2 no connection3. No connection 3 gnd4. +5V 4 +5v
5 clock6 no connection
6 5
4 3
2 11 2
3 4
1 2 3 4 5
6 7 8 9
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
8/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Pin connector Description
1. carrier detect2. receive data
3. transmit data4. data terminal ready5. Ground6. Data set ready7. Reading to send8. Clear to send9. ring indicator
VGA port:
1. red2. green3. blue4. no connection5. ground/dummy6. red return ground7. green return ground8. blue return ground9. no connection10. ground11. ground12. no connection13. horizontal pin14. vertical pin15. no connection
AT power supply:
10
11 12 13 14 15
1 2 3 4 5
6 7 8 9
6 6
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
9/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
1. Power good signal2. +5V
3. +12 V4. -12V5. GND6. GND7. GND8. GND9. -5V10. +5V11. +5V12. +5V
Pin no voltage1. +3.3 V2. +3.3V3. GND4. +5V5. GND6. +5V7. GND8. POWER GOOD9. +5V10. +12V11. +3.3V12. -12V13. GND14. POWER ON15. GND16. GND17. GND18. -5V19. +5V20. +5V
Pin no colour1. Orange2. Orange3. Black4. Red5. Black6. Red7. Black8. violet9. Red
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
10/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
10. Yellow11. Orange12. Blue13. Black14. Green
15. Black16. Black17. Black18. White19. Red20. Red
LPT1 ( local printer terminal/ parallel port):
Pin no signal description
1 strobe2 to 9 data signal10 acknoledge11 busy12 paper end13 select14 auto feed15 error16 INIT17 select18 to 25 Ground
USB( Universal serial BUS) connectors:
Mother board side printerSIdeOut in
Out inIn outIn outIn outIn outOut inOut inIn outOut in
In out
1 2 3 4
1 2
3 4
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
11/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Pin connector description
1 +5V2 DATA3 + DATA4 GROUND
LAN connector:
1. Transmit data2. transmit data3. + receive data4. Un used5. Un used6. Receive data7. Un used8. Un used
Midi or Game port:
Pin number description
1. Ground2. Ground3. Luminance4. Chrominance
1 3 5 72 4 6 8
10
11
12 1314 15
1 2 3 4 5 6 7 8
9
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
12/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
1)+5V 6) Joystick 11)joystick dirction2)joystick button 7)joystick button 12) out3)joystick direction 8)+5v 13)joystick direction4)ground 9)joystick button 14)MIDI in
MIDI ------Musical instrument digital interface
MIDI:
MIDI is the language spoken among musical instruments andcomputers .MIDI is not audio signal ,multimedia presentation that gives MIDI aremore professional sounding and easier to create. They also are more efficientbecause the file sizes are smaller and therefore require less resolves to press thefiles. The PC needs an MIDI interface to translate MIDI data to binary data.
Normally an MIDI interface is available with sound cards.
7 pin SATA Data pin Out:
pin number signal name
1. Ground2. A+3. A-4. Ground5. B-6. B+7. Ground
1 DV1 Digital video interface2 DV1-1 Digital video interface- integrated digital &analog3 DV1-A Digital video interface -- analog
TMDS Transmission Minimized differential signaling
DVI TO LCD MONITOR:
1 2 3 4 5 6 7 8
10
9 11
12
13
14
15
16
18
17
19
20
21
22
2
3
2
4
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
13/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Pin no signal1. TDMS Data 2-2. TDMS Data 2+
3. TDMS Data 2/4 shield4. TDMS Data 4+5. TDMS Data 4-6. DDC clock7. DDC data8. Analog vertical sync9. TDMS data 1-10. TDMA data 1+11. TDMS data 12. TDMS data 3-13. TDMS data 3+14. +5V15. GROUND16. Hot plug detect17. TDMS data 0-18. TDMS data 0+19. TDMS data 0/5 shield20. NILL21. NILL22. NILL23. TDMS clock +24. TDMS clock
C2 Analog GreenC3 Analog BlueC4 Analog Horizontal syncC5 Analog Ground
34 pin floppy disk drive pin out:
Pin number Description
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
14/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
1. Ground2. Normal density3. Ground4. In use /Head loan5. Ground
6. Drive select 37. Ground8. Index9. Ground10. Drive select 011. Ground12. Drive select 113. Ground14. Drive select 215. Ground16. Motor on
17. Ground18. Direction19. Ground20. Step21. Ground22. Write data23. Ground24. Write gate25. Ground26. Track 0027. Ground28. Write protect29. Ground30. Read data31.32. Side select33. Ground34. Disk change/Ready
40 pin IDE connector:
Pin number signal function1. Reset2. ground3. data 74. data 85. data 66. data 97. data 58. data 10
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
15/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
9. data 410. data 1111. data 312. data 1213. Data 13
14. Data115. Data 1416. Data 017. Data 1518. Ground19. key21 DMARQ22 GROUND23 I/O Write data24 Ground25 I/O read data
26 Ground27 I/O channel ready28 Un used29 DMA acknowledge30 Ground31 IRQ32 Host 16- bit34 passed diagnostics35 DAO36 DA237 Host chip select 038 Host chip select 1
39 Drive Active40 Ground
168 pin SD RAM Voltage pin out configuration
Ground ------- 1,23,32,43,54,64,68,96,107,116,127,138,148,162VCC or +5V ---------6,18,26,40,41,49,59,73,84,102,110,124,133,143.+3.3V ----------157,168.NO Connection ---------31,48.
PCI slot voltage pin out configuration:
1 62
1b-side 62 pins
In server side used 94 pins
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
16/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
SIDE A
Pin number signal1 ground2 +12V
5 VCC8 VCC10 VCC12 GROUND13 GROUND16 VCC18 GROUND21 +3.3V24 GROUND27 +3.3V
30 GROUND33 +3.3V35 GROUND37 GROUND39 +3.3V42 GROUND45 +3.3V48 GROUND53 +3.3V56 GROUND59 VCC61 VCC62 VCC
SIDE B
Pin number signal
1 -12v3 ground5 vcc6 vcc12 ground13 ground15 ground
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
17/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
17 ground19 vcc22 ground25 +3.3v28 ground
31 +3.3v34 ground36 +3.3v38 ground41 +3.3v
43 +3.3v46 ground49 ground54 +3.3v57 ground59 vcc
61 vcc62 vcc
AGP Bus connector:
SIDE A
+12 V--------pin no 1VCC --------pin no 9,16,28,45GND ------- pin no 5,13,19,31,37,43,49,55,61
SIDE B
+5 V---------2,3VCC -------5,13,19,13,31,37,,43,49,55,61.
CNR connector:
A1 a30
B1 B30
A1 A30
B1 B30
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
18/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
SIDE A
+12V------pin no 16+3.3v -----pin no 18+5v -----pin no 19GND -----pin 3,6,9,14,17,20.
SIDE B
+12V-----18+5V-------15+3.3V-----19GND-------4,7,10,13,17,20,23,27.
Mother board spare parts numbers:
Small FETs
HJ882NIKOP3055L9916HAPL1084NIKOL1085Alpha AS 2830761070PH 3055L23NO3LDI802NIKO P45NO2LDI202AMS 1085F3055L40N033055NIKO 1084NIKO 1085
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
19/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Big FETs
3 LEADS --- AMS10845 LEADS-----E31FG UNISCAN
AMS 1084AM 15052 LEADS-----
CETCEB 60302CET60NO35CETL31035NECK3296PHB 55 NO3LA
APL LO85F37115F37045
MTB 1306MOR OCCO 3620L55N FO5L
MOUSE IC:
GD 75232 (P-III Boards)St 75182 ( Old boards(12v)
Mini voltage IC:ADP 3163ADP 3168RT 9248ADP 3160ADP 3165W 81301R
DISPLAY IC
IDT 74FSTST 3384PISC 38610CMD 0317MIP 6008 CBRT 9602
8 PIN ICADP 3418SC 1205AD 33416ADP 3412ADP 3148 K
VIA chip
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
20/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
AT 82C58 VP
SMSCFDC 37M62FDC 37C669
SM4SM46SM 5C
TTL IC 14 PINLX 1662 CPLX 74HCTLX74HCLM324HCT 14HC 14
HIP 6302CBMI049 F9302
SMD ICWinbond company
W83877W836274W8 3697 HFSMART 716W8 3637 HFW8 3977 EF83329783268267
ITE Company8660866186128712f8711087118661187112gxi87112FX297112BX287058705 FXS
FAN IC
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
21/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
24 Pins
RT-9222CM 2637SCM 86CSW
SC 1185SC 1189
28 PINS
HIP 6019 DCBHIP 6020 CBHIP6021 CBRT 9229RT 9243
Phase tinkMalasiya 6916156524 CBUS 3007 CWUS 3004 CWRT 9231RT 9237
20 Pins
Raythem 7c5051Rt 9241Sc 2433wLimifinity LX 1665Unisem 3004 cwUnisem 3007 cmCM 2635CM 2633SC 2433SC 1153LP 93AGRC5054
Supplies in Mother Board spare parts:
+3.3v +5v +12v -5v -12vPCI Key board PCI ISA CNRAGP Mouse AGPCNR USB CNRSMD IC Game port CPU fanSouth bridge VGA 8 pin ICProcessor FDDRAM slot IDEIDF ProcesorCrystal IC south bridge
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
22/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
BIOSCNRSMD IC
PCI SLOTISA SLOT
FET
Trouble Shooting:
1) keyboard Error (or) Mouse Error:
1 check the memory /mouse connector2 dry solder the keyboard/mouse connector3 check the jumper setting4 check the fuse5 Tracing from data & clock signal to SMD IC . If any component is
defective repace it6 Upgrade the BIOS with new version.
NC CLOCK
+5V GND
NC DATA
DATA CLOCK GND
5V
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
6 5
4 3
2 1
SMDIC
South
Bridge
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
23/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
(OR)
R
(OR)
(OR)
R
2) Serial port :
I. check the serial port connectorII. dry solder the serial port connector
III. tracing from serial port to serial port ICIV. check the voltage of serial port ICV. check the serial port IC to SMD IC
VI. if any component is defective replace itVII. Finally update the BIOS
1 2 3 4 5
6 7 8 9
SMD
SERIALPORT
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
24/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
(OR)
3) CPU FAN:
1 Hanging problem2 Automatic Restart3 No display
1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 19 20
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
25/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Problem: if insert the old fan ,fan is rotated but insert a new fan, fan is not rotated?Solution: Check the 12v supplyNote : 5V only for update CPU fan speed mention on monitor4).VGA Connector:
1 If 13 pin is defective dont come display2 If 14 pin is defective secondary colors will be come on the screen3 If 1,2,3, pins are defective color disturbance come on the monitor screen4 If low brightness ,low contrast ,secondary colors. Disturbed picture is come
on the monitor check the 6,7,8 pins tracing from vga connector to NorthBridge
1 4 5 6 7 2 3 8 9 10
11 14 15 16 17 12 13 18 19 20
10
11
12131415
12345
6789
NORTH
BRIDGE
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
26/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
5)Parallel Port: ( 25 pin d port
Compared to ground all data pins show same resistance value( 2 to 9 =data pins)
RESISTAR PACK
Pin 1Strobe problem printer icon display in start menu for few secondsPin no 2 to 9Junk printing will comePin no 10It indicates that data has been receive (printer busy problem) and that the printer is readyto accept other data.Pin no 13 & 17:
DOS mode application printing is OK but window based is problem
PIN NO 14
Auto feed - line to line distance will be morePin no 15 & 16Error signal printor Error.Note: Strobe ,data, busy, Acknowledge these pins are problem monitor shows out ofpaper ,printer is offline error busy.
USB port:SMDIC
SMDIC
11
4
20
14
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
27/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
DATA1
DATA2FB
Fuse gnd
1 2 3 4 5 6 7 8 9 10
11 12 13 14
15 16
17
18
19 20
10 9 8 7 6 5 4 3 2 1
20 19 18 17 16 15 14 13 12 11
SMDIC
C
C
C
SMDIC
C
C
C
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
28/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
gnd
1. check the USB connector2. dry solder the USB connector3. check the voltage4. trace from USB connector to south bridge or SMD IC OR any different IC5. trace from diagram from connector to IC if any component is defective replace it.
Mother Board divided in 4 sections:1. power supply2. input, output data sections3. memory4. processor
1) power supply : (+5V, -5V,+12V,-12V,+3.3V)
No power :---1 check the power supply2 check the SMPS (13 &14 or 14,15 pins shot)3 check the power connector or dry solder the power connection4 check the jumper settings on 1,2 normal5 check the panel on/off switch6 check the CMOS battery7 check the all components physically damaged8 dry solder the IF FET transistor9 check all capacitors if any capacitor leakage or doubt replace it10 check the SMD IC (4,8 pin range above 300ohms)11 check the processor if available replace it12 finally upgrade the BIOS
HANGING-1 check the operating system (if operating system perfectly installed when we
start the operating system the window XP logo is show within 3 to 9 seconds2 RAM support check
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
29/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Window 98 32 MB RAM
Win XP SP3 128 MB RAM
2003 server 128 MB RAM3 check the virus with antivirus CD
4 CHECK THE Hard disk drive format5 check the application software in Add remove programmes6 check the processor fan speed7 check the processor over heat or not8 check any component physically damaged or not
Check all capacitors if damaged or not9 Check the processor over heat or not10 check the 8 pin IC over heat or not check tha FET S.11 If the BIOS is corrupted finally upgrade the BIOS
Automatically Restart ---
1. system is corrupted by virus2. operating system is not install properly3. check SMPS voltages4. check all capacitors if physically damaged or if damaged replace it5. check all FET transistors6. check 8 pin IC7. check SMD IC8. finally upgrade the IC
BIOS (basic input output system)
Features of BIOS
1. CPU support2. Chipset support3. Memory support4. Power management5. drive support6. PC 2007 operating system support7. Boot versatility support8. parallel port supports9. plug and play support
10. PCI & AGP support11. USB support12. Antivirus support
Beep codes for general identifications:1. one short beep when display logo
solution no error during POST ( power on self test)3 . long beep in an end less loop
Solution NO RAM installed or RAM not detected2. One long beep followed by 3 short beeps
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
30/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Solution video card not detected or not found3. High frequency beeps when system is working
Solution CPU overheated system running at a lower frequency.
PHOENIX BIOS BEEP COEDS:---
Beep codes Problems1,1,3( short) CMOS chip1,1,4(short) BIOS failure1,2,4(short) mother board1,2,3 (short) mother board1,3,1 (short) mother board1,3,4 (short) mother board1,4,1(short) mother board4,3,1(short) mother board1,4,2(short) memory module (RAM)3,2,4(short) key board controller
1,2,1 system time error2,,x,x(short) chipset error3,3,4(short) video adaptor problem4,2,4(short) expansion card failure4,3,4(short) time of day clock failure4,4,1(short) serial port error4,4,2(short) parallel port error4,4,3(short) co processor error
Standard IBM BIOS Beep codes:
Beep codes problemNo beeps power supply or system boot failureOne short beep post is okTwo short beeps post error with error code display on screenRepeating short beeps power supply or system boot failure1 long & 1 short beeps system boot error1 long & 2 short beeps video display adapter failure1 long &2 short beeps video display adapter error3 long beeps keyboard error
AMI BIOS Beeps codes:
Beep codes problems1 short beeps post is ok2 short beeps memory failure3 short beeps memory or parity failure4 short beeps system time failure ( the system clock timer chip has failed)5 short beeps mother board failure6 short beeps key board controller failure7 short beeps CPU failure8 short beeps video adapter failure9 short beeps ROM BIOS check some error10 short beeps CMOS read& write error
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
31/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
11 short beeps cache memory error1 long, 3 short beeps memory failure1 long, 8 short beeps video adapter failure
Award BIOS beep codes:
Beep codes problems1 long beep memory error1 long , 2 short beeps video error1 long ,3 short beeps video failureContinuous memory or video failure
Note BIOS reports POST error through the use of audible signals called beep codes aswell as through the hexadecimal codes called post codes.MEMORY REFRESHING SIGNAL
TSA
PCI
AGP
RAM CPU
NORTHBRIDGE
SOUTHBRIDGE
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
32/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Pin configuration of ISA slots
SIDA A
2to 9 --- data address pin input output12to 31address pin (input)
SIDE BPin no 1 ----- VCC,+5V
3 pin ground20 memory refresh31 oscillator
Pin configuration of PCI slots
PROCESSOR SPEED & OPERATING VOLTAGE
A10
A16
A19
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
33/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
Model processor type CPU speed voltage
Intel 486 sx,486 dx, 66 MHZ,100MZ 5V,3.3V486 dx2,dx4
CyrexAMD 486 DX, 486 DX4 100MHZ 3.3VIntel P-1 old 75 MHZ to 133MHZ 3.3V
p-1 166MHZ to 233 MHZ 2.8VCyrexIBM P-1 pro 200 to 333 MHZ 2.9V
AMD P-1 K6 350 to 550MHZ 2.2V to 3VIntel P-11 266 MHZ to 350MHZ 2VIntel P-111 400V to 1.2V 7V,1.6VInetl P-1V 1.5 GHZ to 2.7GHZ 1.6V
NO DISPLAY
1 Check CMOS battery2 Check the RAM3 Check the jumper setting4 Check the VGA card insert properly the total system5 Check all FET transistors6 Check the voltage regulator I.C7 Check the capacitor, if damaged replace it8 Check the SMD IC9 Check the North Bridge to VGA port in between any component is
defective10 Check the processor voltages
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
34/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
OSCILLOSCOPE
If refreshing signal is not coming:
1 Check the all dry solders in mother board2 Check the MOSFET JFET and 8 pin IC3 Check all capacitors4 Check the RAM & RAM slots5 Check the crystal IC6 If possible change the processor
Problems
mailto:[email protected]:[email protected] -
7/28/2019 saleem Mother Board 10
35/35
[email protected] WWW.UNLIMITEDTIPS4ALL.BLOGSPOT.IN
BIOS Problem
1 RAM test stop2 Hanging3 Windows screen continue running
4 No display5 Keyboard error
P-111 Mercury Board
No display1 Check the capacitors if damaged replace it2 Replace the SMD IC
HANGING1 Replace the RAM2 Check the MOS FET or replace MOS FET S
3 Upgrade the BIOS
P-111 Intel green board-
No displayChange MOS FET (big)
HANGINGBIOS problems
P-1V Giga byte mother board 845 GL M odel
No displayCheck the transistors & replace it
HANGINGITE SMD IC replace
Intel original mother board
No display continues beep soundsReplace the RAM ICWhen we install the operating system first files copy OK but after installation it will behangingProcessor problemINTEL P-11 slot processor
No power supply
1 Check VCC to ground2 Check MOS FETs3 Dry solder the power supply section4 Replace the BIOS
mailto:[email protected]:[email protected]