Sale of Woodshop Tools and Equipment

Dates of Sale: Saturday, May 31 & Sunday, June 1 – 9:00 AM to 4:00 PM Seller: John Goodro Location: 213 Sierra Vista Court, Bernalillo, NM 87004 Phone: (505) 771-2966 – home; (505) 610-3346 – cell Email: johngoodro@gmail.com Driving Directions: (from Exit #242 of I-25, about 10 miles north of Albuquerque) Take US 550 west to the main street of Bernalillo, Camino del Pueblo. Turn right, heading north, for about 1/8 mile. On the left you will pass Stardust Dance Academy (#135) and a residence (#137). Turn left immediately past the residence on an unmarked street. Proceed west about ¼ mile to Sierra Vista Court and turn right. John’s home is on the left at the end of the cul-du-sac. (All asking prices listed represent approximately 50% of cost new, unless otherwise noted. Cash only, unless prior arrangements.) Table Saw, Powermatic 10” 3HP, w/ 53” side table, Powermatic fence, fold-down outfeed rollers, with overhead dust collection system, custom drawers under table, on rolling base. $1800 Shaper, Woodtek, 3 HP on rolling base w/ sliding table and hold-downs. $1000

Band Saw, Delta 14” 1 HP, w/ riser blocks,

on rolling base. $350 Planer, Woodtek, 15”, on rolling base. $750

Lathe, Powermatic, (older model from a high school), Reeves drive VS, 240v., 2 HP(?), 30” swing, 36” spindle length, includes tool rests and basic accessories. $1000 Compressor, Husky, 2 HP, 30 gallon. $200 Joiner, Delta 6”, on rolling base. $150 Mobile Pedestal Rollers (2), adjustable w/ 5 ball-bearing rollers each (pair) $75 Dust Collector, Woodtek, 2 HP, on rolling base. $150 Framing Nailer, Porter-Cable, in case. (w/ supply of nails) $150 Finish Nailer, Porter-Cable, 2-2/1”, in case. (w/ supply of nails) $125 Pin Nailer, Porter-Cable, in case. (w/ supply of nails) $80 Brad Nailer, Porter-Cable, in case. (w/ supply of nails) $100 Stapler (air), Bostich, ¼”, in case. (w/ supply of staples) $50

Shop Cabinet, custom made, 48” W x 72” H x 16” D. Drawers on glides, heavy duty. B.O.

Rolling Sheet / Lumber Cart, 48” wide. $150 Chop Saw, Makita 10” sliding-bevel. $150 Drill Press, Delta 14” floor model, on rolling base. $150 . Drum Sander, Delta X5 13” open-end. Butt Hinge Mortise Template System, Some belts included. $700 Porter-Cable, in case, never used. $200 Power Planer, Makita 3-1/2”, $50 Chain Saw, Makita, 16” Electric, UC4000 13amp, $100 Radial Arm Saw, Ryobi, $75

. Domino Joiner, Festool DF500Q, includes selection of bits, several bases, supply of dominos, all in two Festainer cases, $600 for total system. Disk Sander, Festool ETS125 5” orbital w/ dust collection port, in Festainer case, needs replacement Velcro pad, includes supply of sanding disks, $150 Router & Router Table, Porter-Cable 695 w/ plunge and standard bases, including table, $125 Euro Hinge Mortise Jig, Blum, drills both doors and cabinet sides, with accessory bits, $250 Shop Vac, w/ accessories, $25 Heater, dual propane heater on 40 gallon tank, $50 Scroll Saw, Woodtek 20”, $75

Lathe Turning Tools:

- Scraper, 1/2”, round-nose, 1/2” thick (Crown) - $35 - Gouge, 3/8”, “Skewchy”, 15-1/2” OAL (Crown) - $20 - Scraper, 3/4”, round-nose, 3/16” thick (Crown Pro-PM) - $31 - Parting Tool, diamond, 7/32”, (Crown Pro-PM) - $35 - Scraper, Heavy-Duty, round-nose, right-hand,

1-1/2” x 5/16” thick, 24” OAL, (WWS/Crown) - $55 - Bead Tool, ¼”, (WWS/Crown) - $22.50 - Bead Tool, 3/8”, (WWS/Crown) - $27.50 - Bowl Gouge, 5/8”, 27-1/2” OAL, (WWS/Crown) - $49 - Spindle Roughing Gouge, 3/4”, (WWS/Crown) - $35 - Parting Tool, diamond, ¼”, (WWS/Crown) - $31.50 - Skew, ½”, (WWS/Crown) - $22.50 - Skew, 1”, (WWS/Crown) - $32.50 - Scraper, 1” square, (WWS/Crown) - $33.50 - Scraper, 1” hook, (WWS/Crown) - $35 - EZ-Beader, ½”, (Sorby) - $22

Chuck, One-way Stronghold w/ 3 jaw sets, 33mm insert, $197 (#2 profile jaws; pin jaws; #3 profile jaws) Mega Jumbo Jaws, One-way, - $65 Hollowing System, Kelton jig, $110 Bowl Coring System, Kelton/McNaughton, 1-1/4” post w/4 11” knives and handle, - $125 Hollowing Tool, “Termite”, $47

Dovetail Jig, Leigh D4, $400 Miter Saw, $20 Clamps, large quantity of various types. B.O. for individual clamps or batches. Wood, large quantity of sized cabinet-quality woods, various species and sizes, partially shown in pictures. B.O. for batches only.