Sag Cincher TutorialSag Cincher TutorialSag Cincher TutorialSag Cincher Tutorial

Materials:

FOE (fold over elastic)

Polyresin snaps - 6 caps, 2 studs, and 4 sockets

Sewing machine with thread.

1. Cut one piece of FOE, about 16” long

2. Fold in half, right sides together, and sew

short ends together with a narrow seam and

stretch stitch.

3. Turn right side out, flatten with the seam at

the centre and open, and topstitch with a

stretch stitch.

4. With the seam side down, set in snaps,

the studs on each end, facing up, and the

sockets about 2” and 3” in from studs

(check on pants for placement)

5. Slide the finished Sag Cincher through the

back belt loops of pants and snap!

all text and photographs copyright L. Bosch May 2010

feel free to use this tutorial for personal use, but please do not sell items made from this tutorial.