contents safety matters ... button and change the parameter data as needed. 4. press the “write”...

Debbie

Rectangle

ContentsSafety Matters .................................... 3Unpack and Check ............................... 4

Getting Aquainted .............................. 5-6Battery Information .............................. 7Antenna Information ............................ 8Belt Clip Information ........................... 8Earphone/Microphone Information ..... 9Strap Information ................................. 9

Radio Overview .................................. 10-12

Basic Operation .................................. 13Turn On/Off ......................................... 13Adjust Volume ...................................... 13Select Channel ..................................... 14Make Call ............................................. 14Receive Call ......................................... 14

Auxiliary Functions ........................... 15PC Programming .................................. 15Programmable Key Settings ................ 16-18Other Function Settings ....................... 19-22

Specification ......................................... 23Technical Terms ................................... 24Warranty ............................................... 25

2 www.blackboxradios.com

SafetyPlease read the warnings below. Failure to obey these warnings may cause danger or violation of the law.

•Usethisradioincompliancewithlocalgovernmentregulations.

•Pleaseturnofftheradiobeforeenteringapotentiallyexplosiveorflammableenvironment.

•Donotreplaceorchargebatterypackinapotentiallyexplosiveorflammableenvironment.

•Turnofftheradiobeforeapproachingablastareaordetonatorarea.

•Donotuseiftheantennaisdamaged.Damagedantennasmaycauseburns.

•Onlyqualifiedtechniciansarepermittedtodomaintenanceonthistwowayradio.Donotdisassembletheradio.

•Toavoidproblemscausedbyelectromagneticinterferenceorelectromagneticcompatibility,pleaseturnoffthe radioinplaceswithaWirelessCommunicationTransmitEquipmentProhibitedsignposted,suchashospitalsor healthcarefacilities.Wheninaplane,turnofftheradioifrequired.

•Donotputtheradiowithinthepossiblerangeofanairbaginavehicle.

•Donotexposetheradiotodirectsunlightornearheatingdevicesforalongperiodoftime.

•Keeptheradioverticalandspeaknearthemicrophoneduringtransmission.

•Ifyoucarrytheradioonyourbody,pleasekeeptheantenna1inch(2.5cm)awayfromyourbodywhen transmitting.

www.blackboxradios.com 3

Unpack and CheckBeforeuse,werecommendthatyoucheckthepackingandidentifytheitemslistedbelow.Ifanydamagehasoccurredduringshipment,pleasecontactyourlocaldealer.

Items Radio Antenna Battery Charger w/adaptor Adaptor Belt Clip Strap Warranty CardQuantity 1 1 1 1 1 1 1 1

Note:Forfrequencybandofantenna,pleaserefertothelabelonthebottomoftheantenna.

Optionalaccessoriesareavailabletomeetyourrequirements.UsegenuineBlackbox™Bantam®accessoriestoensure clear communication and outstanding performance.


Get AcquaintedBattery InformationApplicable Battery Model:PleasechargewithBlackbox™Bantam®brandedbatterycharger;Chargingwithothertypesofbatterychargersmaycauseexplosion,personalinjuryordamagetotheradio.

Note:1.Donotshort-circuitthebatteryterminalsordisposeofthebatteryinafire.Donotdisassemblethebattery casing.2.Chargingshouldbedonebetween0°C~45°C.Iftemperatureisoutsidethisrange,thebatterymaynotcharge fully.3. Please turn off the radio before charging.4.Donotunplugtheadapterorremovethebatteryduringcharging.Thiswillinterferewiththechargingprocess.5.Whenthebatterypowerisconsumedquickly,evenafterafullcharge,pleasereplacewithanewbattery.6.Donotchargewhenthebatteryorradioarewet.Dryitwithaclothtoavoidpossibleelectricalshock.

Warning:Please prevent any metal conductors such as jewelry or keys from contacting the battery electrodes. Use precaution whenplacingthebatteryintoapocket,walletoranymetalcontainer.


Charging Steps:

Please charge as follows:

1. Connect the adapter with the charger. 2. Plug the adapter into an A/C outlet.

3.ThechargerisreadyforchargingiftheindicatorLEDlightsredfor onesecondandturnsoff.IftheindicatorLEDisflashing,thecharger is not ready.

4. Place the battery into the charger aligning the battery slots with the charger guide rails.

5.TheindicatorLEDlightsredwhencharging.Ifthebattery capacityistoolow,theindicatorLEDflashesred.Thebatteryfirst trickle charges and turns to normal charging automatically.

6.ThebatteryisfullychargedwhenthebatteryLEDlightisgreen. The charger stops charging automatically.

Precautions in Charging

Please charge the battery before initial use or after extended storage. Please change or charge the battery if the powerislow.Ifthebatterypowerisconsumedquicklyevenafteranormalchargethebatterylifeisfinished.Pleasereplace with a new battery pack.

Do not charge the battery with the radio power on.


Attaching and Removing the Battery PackAttaching the BatteryMatch the two grooves of the battery with the corresponding guides on the back of the radio. Make surethebatteryisflatagainstandparalleltothealuminum chassis.

Then push the battery along the guide until the battery latch locks.


Removing of Battery:Beforeremoving,makesuretheradioisturnedoff.Then push downwards on the battery latch.

Slide the battery towards the bottom of the radio.

Attaching/Removing Belt ClipAttaching Belt Clip (Figure 3)Align the screw eyelets of the belt clip with those on the rear of radio and fasten the belp clip with enclosed screws.

Removing Belt Clip (Figure 4)Loosen the screws to remove the belt clip.

Attaching/Removing the AntennaAttaching the Antenna (Figure 1)Screw the antenna into the connector at the top of the radiobyholdingthebottomoftheantenna,andturningit clockwise until secure.

Removing the Antenna (Figure 2)Rotate the antenna counter clockwise by holding the bottom of antenna.


Figure 1 Figure 2 Figure 3 Figure 4

Attaching External Earphone/Microphone1. Open the Earphone/Microphone jack cover. There is noneedtoremoveit.(Figure5)2. Insert the Earphone/Microphone into the Earphone/Microphonejack.(Figure6)


Attaching the StrapThread the strap into the hole at the back of the radio and fasten it.

Figure 5 Figure 6

BANTAM BANTAM

Radio Overview


BANTAM

1 Antenna Antenna with helical plug is used to transmit and receive signals.

2 Top Key: Programmable Key The default setting is off.

3 Channel Selector Choose channel and the channel annunciation is available if the voice prompt is on.

4 Power Switch/Volume Control This knob is to turn on/off the radio and adjust volume. Rotate the knob clockwise until a click sounds to turn on the radio. Rotate it further to adjust the volume. Rotate the knob counter clockwise until a click sounds to turn off the radio.

5 LED Indicator TheLEDindicatorglowsredduringtransmitting;glowsgreenduringreceiving;flashesredwhenthebattery powerisinsufficient;flashesgreenduringscanning.

6 Strap Hole The hole is to fasten the strap.

7 PTT (Push-To-Talk) Key Totransmit,pressdownthePTTkeyandspeakintothemicrophone;releaseittoreceive.

8 Side Key 2: Programmable Key The default setting is monitor.


Over View (continued)

9 Side Key 1: Programmable Key The default setting is off.

10 MIC-SP Jack/ Data Port To connect the earphone/microphone or programming cable

11 Speaker Output voice.

12 Microphone Input voice.

13 Belt Clip The radio is easy to carry for you can clip it on your belt.

14 Li-ion Battery


Basic OperationTurning the Radio ON/OFF

Rotate the Power Switch/Volume Control knob clockwise until a click sounds to turn on the radio. At thesametime,avoiceindicationofthecurrentchannelis heard.

Rotate the Power Switch/Volume Control knob counter clockwise until a click sounds to turn off the radio.


BANTAM

BANTAM

Volume Adjustment

Aftertheradioisturnedon,rotatethePowerSwitch/Volume Control knob to adjust volume.

Tip: you can listen to background noise in monitor mode and adjust the volume.

Channel Selecting

Rotate the channel to choose your desired channel from 1~16 channels.

You can select the channel according to the number or symbolmarkatthebottomoftheknob.Also,youcanoperate according to channel annunciation.


Make a Call

Tomakeacall,holddownthePTTkeyandspeakintothe microphone with normal voice. Please keep the microphone 2 inches away from your mouth.

Tip:1.HolddownthePTTbuttonandtheLEDindicatorglowsred,theradiobeginstotransmit.

2.IftheLEDindicatorflashesred,thebatterypowerisinsufficient.Theradiocannottransmitwhenthebatterypower is not enough for normal operation.

Receive a Call

ReleasethePTTbutton,theradiobeginstoreceive.Youcan hear the other voice if you receive a call on your current work channel. If call signal is too weak or you setveryhighsquelchlevel,youcannothearthecall.

BANTAM

Auxiliary FunctionsAuxiliary Functions need to be set through PC software or contact your dealer for programming.

PC Programming1.Visitblackboxradios.comtodownloadtheBantam®programmingsoftware(youcanalsocontactyourdealerforprogramming).2. Turn off the radio and connect it to the PC with the programming cable (seefigureontheright).3.Runtheprogrammingsoftware,thenturnontheradio.Press“Read”button and change the parameter data as needed.4.Pressthe“Write”buttontochangeparametersintheradio.5.Forparametersettingandoperation,pleaserefertothehelpdocumentsof the software.


BANTAM

ProgrammingCable

(optional)

Programmable Key SettingsKey Setting menu. The default setting is as follows:

•Thedefaultlongpressdurationis2seconds.•TopKey(orangekey)longpress:off•TopKey(orangekey)shortpress:off•SideKey2longpress:off•SideKey2shortpress:monitor•SideKey1longpress:off•SideKey1shortpress:off

You can change the function settings to a function key’s long and short presses using the programming software on the“KeySettings”Menu.

Thekeyscanbesetas:off,monitor,monitormomentarily,soundofencrypt,alarm,electricitydemand,whisper,VOX or power.

Battery Power (electricity demand)Withthisfunction,theradiowillreportthebatterypowerbyaudibleindication:“PowerHigh”,“PowerMiddle”,“PowerLow”,and“PleaseChargeBattery”.

High/Low Power Switching (power)You can set the power setting of each channel separately according to your work environment to maximize the use ofbatterypower.Whensetatlowpower,theradiouseslesscurrent,thusthebatteryoperatingtimeisprolonged.High power is 5W and low power is 1W.

•Youcanselect“PowerSelect”in“ChannelInformation”menutosetthepowerashigh/lowpowerofeachchannel separately.



MonitorThisfunctioncanbesetas(TopKey)/(SideKey2)/(SideKey1)usingtheprogrammingsoftwareonthe“KeySettings”Menu.Foroperation,presstheprogrammedkeytohearaweaksignalandtohelpyouadjustthevolumewhen no signal is received. Press the key again to cancel monitor.

Sound Encrypt (Voice Encryption)Whenthisfunctionisprogrammed,thetransmitsoundisencrypted.Theothersideneedstodecryptthetransmission.Otherwise,thesoundreceivedisnoiseorunintelligibleaudio.1.Thisfunctioncanbesetas(TopKey)/(SideKey2)/(SideKey1)usingtheprogrammingsoftwareonthe“KeySettings”Menu.2.Presstheprogrammedkeyandtheradiowillannounce“VoiceEncryptOn”.Pressagaintodisableandtheradiowillannounce“VoiceEncryptOff”.3.Youcanturnthisfunctionon/offonthe“OptionalFeature”menuatthe“SoundofEncryption”.Checktheboxto turn on the function and uncheck the box to turn off the function.

WhisperWiththisfunction,youcanbeclearlyheardevenifyouspeakintotheradiowithaverylowvoice.1.Thisfunctioncanbesetas(TopKey)/(SideKey2)/(SideKey1)usingtheprogrammingsoftwareonthe“KeySettings”Menu.2.Presstheprogrammedkeyandtheradiowillannounce“WhisperOn”.Pressagaintodisableandtheradiowillannounce“WhisperOff”.3.TosetthemicrophonereceivingvolumeleveltheWhisperlevelcanbesetas1,2,or3.1isthemostsensitive,3is the least sensitive. 4.Youcanturnthisfunctionon/offonthe“OptionalFeature”menuatthe“WhisperFunction”.Checktheboxtoturn on the function and uncheck the box to turn off the function.

AlarmWiththisfunctionprogrammed,theradioalarmsoundsandtheLEDglowsred.Atthesametimeitsendsanemergency signal to other Bantam radios on the same channel and the receiving radio will sound an alarm tone.1.Thisfunctioncanbesetas(TopKey)/(SideKey2)/(SideKey1)usingtheprogrammingsoftwareonthe“KeySettings”Menu.2.Tostopthelocalalarm,pressthe(PTT)keytoreturntonormaloperatingstatus.ThereceivingBantamradioresumesnormaloperationafterpressingthe(PTT)key.3.Aftersendingtheemergencysignal,theradiowillnotreceivetransmissionsuntilthe(PTT)keyispressed.Theradiowillre-sendtheemergencysignalevery5secondsuntilthe(PTT)keyispressed.4.Youcanturnthisfunctionon/offonthe“OptionalFeature”menuatthe“AlarmFunction”.Checktheboxtoturn on the function and uncheck the box to turn off the function.

VOXWithVOX,youcandirectlyspeakintothemicrophonewithoutholdingdownthe(PTT)key.TheLEDglowsredandyourvoicewillbetransmitted.WhenoperatinginWhisperVOXmodeusingearphones,theradiobeepswhenVOX is enabled.1.Thisfunctioncanbesetas(TopKey)/(SideKey2)/(SideKey1)usingtheprogrammingsoftwareonthe“KeySettings”Menu.2.Presstheprogrammedkeyandtheradiowillannounce“VOXOn”.Pressagaintodisableandtheradiowillannounce“VOXOff”.3.TosetthevoicecontrolsensitivityoftheVOX,theVOXlevelcanbesetas1,2,or3.1isthemostsensitive,3isthe least sensitive. 4. WhisperVOX(usingearphones):Checktheboxtoenablethefunctionandunchecktheboxtodisablethefunction.5. VOX function: Check the box to enable the function and uncheck the box to disable the function.

DuringtheVOXoperation,pressthe(PTT)keytocanceltheVOXfunction.Turnoffandthenturnontheradiotore-enable the VOX function. Note:Checkingboth“WhisperVOX”and“VOXFunction”theVOXisdisabled.



Other Function SettingsVoice PromptsThe default setting for this function is voice prompts in English. You can know the current channel through voice prompts.1.Inthe“Voice/BeepTone”in“OptionalFeature”menu,youcansetthepromptsasOFF/English/Tone.2. Channel Annunciation: The radio will report the current channel number when you switch to a channel.3. Low Battery Alert: The radio will alert you by voice prompts when the battery power becomes low.4.ScanOnIndication:Ifthecurrentchannelissetasthescanchannel,theradiowillinformyoubyvoiceprompts.

Low Battery AlertWhentheradioannouncesthelowbatteryalerteitherbyvoiceindication“beep/pleasechangethebattery”ortheLEDflashesredwhentransmittingtheradiowillstoptransmitting.Pleasereplacewithanewbatteryorchargethebattery.

Battery SaveThe receiver circuit will cycle ON and OFF by the selected ratio to reduce power consumption. The radio automatically enters save mode 5 seconds after no signal is received or transmitted and no key has been pressed. 1.Thedefaultsavescaleis1:3.Youcanchangethe“SaveScale”inthe“OptionalFunction”menuoftheprogrammingsoftware.Youcanselectoff,1:1,1:2,1:3,or1:4.Selecting“Off”cancelstheautobatterysave.Selecting 1:4 offers the highest battery conservation.


DTMF (PTT ID/ANI)YoucanenteraDTMFcode(upto8digits,consistingof1234567890ABCD*#)inthe“PTTID”iteminthe“OptionalFeature”menu.Youcanalsosetthecodetobesentatthe“BeginofTX”,“EndofTX”and/oras“SideTone”.Checktheboxtoenablethefunctionandunchecktheboxtodisablethefunction.

YoucanedittheDTMFcodesettinginthe“DTMF”iteminthe“OptionalFeature”menu.DTMFSpeed(digit/s):SettingRangeis4-15.Defaultis6.FirstDigitTime(ms):SettingRangeis0~100ms.Defaultis0ms.FirstDigitDelay(ms):SettingRangeis100~1000ms.Defaultis100ms.

Lock CheckWhenthisFunctionissetas“Check”,theradiowillsoundacontinuous“Beep”whenthePLLoverclocksorisunabletoworknormally.Whenthisitemissetas“Off”,theradiowillnotmakelockcheckofPLL.

Busy Channel LockThisfunctionpreventstheradiosfromtransmittingwhileanotherradioistransmittingonthesamefrequencyoronthesamefrequencywiththesameCTCSS/CDCSStone.Pressing(PTT)keywhilethechannelisinuse,theradiowillgeneratealerttoneandtransmissionisprohibited.Release(PTT)keytostopthealerttone.Whenchannelisnotinuse,press(PTT)keyagainandtransmissionisenabled.

1.Usingtheprogrammingsoftwareinthe“ChannelInformation”menuyoucansetthisfunctioninthe“BusyLock”columnofeachchannelseparately.“OFF”:thefunctionisdisabled.“Carrier”:theradiowillnottransmitifsignalonthecurrentfrequencyisbeingreceived.“QT/DQTtheradiowillnottransmitifsignalonthecurrentfrequencywiththesameCTCSS/CDCSStoneisbeingreceived.


ScanThedefaultsettingofthisfunctionisoff.Whenthisfunctionisenabled,rotatechannelselectorknobto16thchannel.TheLEDflashesgreenandtheradiowillcheckallchannelsthathavetheScansettoYES.Theradioautomatically stops at the channel on which a signal is received.Youcanenablethrough“ScanInformation”itemonthe“OptionalFeature”menu:1.ScanType:Selecting“off”,CH16isanormaloperatingchannel.Selecting“CarrierOperate”whenrotatethechannelselectorto16thchannel,theradiowillstartscanning.2.DropoutDelayTime:TheDropoutDelayTimeisthetimefromtheendofareceivedcalltothetimescanningautomatically resumes. Setting range is 0.5~64.5s. The default setting of this item is 3.5s.3.TXDwellTime:TXDwellTimeisthetimefromtheendoftransmissiontothetimescanningautomaticallyresumes. Setting range is 0.5~64.5s. The default setting of this item is 3.5s.

SquelchSetsquelchleveltodecidehowstrongareceivedsignalneedstobetounmutethespeaker.Thelowerthesquelchlevel the weaker the received transition needs to be to unmute the speaker. ThedefaultsettingofthisfunctionisLevel4.Youcansetthrough“SquelchLevel”optionin“OptionalFeature”menu.Settingrangeis0~9.Selecting“0”causesthesquelchtobeopen.Thehigherthesquelchlevel,thehardertoopenthesquelch.

Time Out Timer (TOT)Time out timer is used to prevent someone from using the same channel for a long time. At the same time to avoidradiodamage,causedbyextendedcontinuoustransmission.Ifthetransmissionexceedsthepresettime,transmissionwillbeinhibitedandanalerttonewillsound.Tostopthealerttone,releasethe(PTT)key.Press(PTT)keyagainandtransmissionisenabled.Thedefaultsettingofthisfunctionis180s.Youcansetthrough“TimeOutTimer”itemon“OptionalFeature”menu. The maximum time is 5 minutes.

25KHz/12.5KHz (Wide band/Narrow bad)Thedefaultsettingis25KHz.Youcandecidewhetherthechannelworksas25KHzor12.5KHzthrough“W/N”itemin“ChannelInformation”menu.

CTSS/CDCSSCTSS/CDCSSisasub-audiosignal,mainlyusedtoavoidunwantedconversationsonthesamechannel.WithCTSS/CDCSSset,youcanonlyhearconversationswithmatchedCTSS/CDCSSwithineffectivesignalrange.WithoutCTSS/CDCSS,youwillreceiveallconversationsonthesamechannelwithineffectivesignalrange.YoucanpresetCTSS/CDCSSsignalingthrough“CTC/DCSENC”itemin“ChannelInformation”menuorbyyourlocal dealer.

Invalid Channel IndicationIfcurrentoperatingchannelisaninvalidchannel,theradiowillsendcontinuous“Dududu”asanalerttone,whichmeans the current channel is unable to transmit or receive.

Battery Power IndicationThis function enables you know the residual battery power at any time and place.TurnontheradioandLEDwillindicatetheresidualbatterypowerL1,L2,L3andL4byflashtimes:1,2,3and4.L4 means the battery power is full. L1 means the battery power is lower than the minimum normal operating power capacity and should be replaced soon.

Power ProtectionDuringuseormaintenance,transmissionisprohibitedifthepowersourceisimproperortheworkingvoltageishigher or lower than normal working voltage.Iftheworkvoltageislowerthan6.2vorhigherthan9.5v,transmissionisdisabled.


Specification General FrequencyRange UHF:400-470MHzVHF:136-174MHz ChannelCapacity 16(15+S) Channel Spacing 25.0kHz / 12.5kHz FrequencyStability ±2.5PPM OperatingTemperature -25~+55°C AntennaImpendence 50Ω Li-ion Battery 1500mAh Operating Voltage 7.5V Dimension(W×H×D) 2.3”×3.75”×1.34”or59mmx96mmx34mm Weight(withantenna&battery) 6.98oz.or198g

Transmitter RFPower(H/L) UHF:4W/2WVHF:5W/2W

Receiver AudioDistortion ≤5% Reference Sensitivity 0.15uV/ 0.18uV Adjacent Channel Selectivity 65dB / 55dB Intermediation Reject Ratio 55dB AudioPowerOutput Maximum:≥0.6W



Appendix: Technical Terms Name Description CTCSS/CDCSSisakindofsignalingattachedtoaudiosignal.Ifthe CTCSS/CDCSS CTCSS/CDCSSofthetransmitteristhesameasthatoftheReceiver,thespeaker is unmuted and sound comes out. Otherwise sound can not come out. Monitor ThisfunctionenablesyoutohearallcallsevenwithunmatchedCTCSS/CDCSS. Scan A way to hear conversations on all channels. BCL BusyChannelLockout.Whenthischannelisinusebyothers,yourradioisprohibitedfrom transmitting on the channel to avoid interference. Wired Clone This is a way to clone parameters from one radio to another one. TOT Time out timer is used to prevent someone from using the same channel for a long time. At the same time to avoid radio damage by continuously transmitting for long time. Thisistosolveproblemsoftalkqualityandnoise.Squelchsuppressthebackground Squelch noiseandkeeptheradioquietwhennosignalisreceived.Squelchmutestheradiowhen nosignalisreceived.TurnontheSquelch,andyouwillhearthesoundfromthespeaker. Noise strength is inversely proportional with signal stregth. The stronger the SquelchLevel signal,theweakerthenoiseis.Thenoiseisdividedtoseverallevelsaccording to its strength. The user can select the level to suit the working environment. VOX Voice Operated eXchange: VOX enables the user to speak into the radio without pressing(PTT)keyandthesoundistransmitted. Whisper Withwhisperfunctiononandtheradioequippedwithearphone,youcanspeakinto themicrophonequietlyandyourvoicecanstillbeclearlyheard. Alarm/Emergency Alert This function enables the user to send an emergency alert to other users on the same channel. Other radios on the same channel will sound an emergency alert after received emergency signal. PTTID Withthisfunctionon,theradiowillsendanIDcodewhenpressingorreleasingthe(PTT)key, allowing another radio and management control centers to identify it.


Warranty and Return Policy 2013 IfthereareanyDefectsinmaterialorworkmanshipundernormaluseandservice,itemswillberepairedorreplacedfreeofchargefor3 Years from date code on product. Simply contact your salesperson for repair or replacement.Blackbox Radios warrants all products against manufacturer’s defects as long as the product is still under warranty. The forgoing warrantyislimitedandisnotapplicableto:(i)normalwearandtear;(ii)defectsordamagecausedbymisuse,accident(includingwithoutlimitationcollision,fireandthespillageoffoodorliquid),neglect,abuse,alteration,unusualstress,modification,improperorunauthorizedrepair,installation,alteration,wiring,ortesting,improperstorage,useinanunapproveddeviceoriftheserialnumberhasbeenremoved;(iii)usenotinaccordancewiththedocumentation;and(iv)damagecausedbytheequipmentwithwhichtheproductisused. Visible physical damage invalidates warranty. Incomplete product kits will not be accepted for replacement or repair.Shipment errors must be reported within 3 days of receipt of goods in order to get replacements.BlackboxRadiosdoesnotacceptreturnsoncustomorders.Allcustomordersarefinal.Itemsmayonlybereturnedforcreditiftheyareunused,inoriginalpackagingandpurchasedwithinthelastthirty(30)days.Therewillbea20%restockingfeetoALLitemsreturnedfor credit that meet the above stipulations. Blackbox Radios does not issue refunds and we reserve the right to not issue credits.

Non-Warranty RepairsBlackboxRadiosstandardlaborrateis$60.00anhourwithaminimumrequirementofthirtyminutes.Thisdoesnotapplytoexcessivedamage(i.e.water-damagedunits).Ifanexcessivelydamagedunitisdeemedrepairable,thefeemaybeupto$85.00perunit.Thecostofpartsvariesandisinadditiontothelaborchargers.RadioProgrammingfeesaresetat$5.00perunit.Allgoodsrepairedwillrequireasignatureofauthorization to do the repair.RETURNTOCUSTOMER(RTCITEMS)Itemsreturnedthataredeemed“nonmanufacturersdefect”,havethedatecodemissing,orarenotwithintheproperwarrantytime-periodmayberepairedwithalaborfeeatthesolediscretionofBlackboxRadiosItemsdeemed“RTC”arenotcoveredunderBlackboxRadios,warrantypolicy and the customer will be responsible for paying the shipping costs to return the products back to the customer. If the customer does not wanttoreceivetheRTCitemsandpaytheshippingcosts,BlackboxRadioswilldisposeoftheproducts.Byreturningaproductforrepair,theownergrantsBlackboxRadiospermissiontoopenanddisassembletheproductasrequiredforevaluation.Inallcases,BlackboxRadioshassoleresponsibilityfordeterminingthecauseandnatureoffailure,andBlackboxRadiosdeterminationwithregardtheretoshallbefinal.CustomerspayforshippingtoandfromBlackboxRadios,thecostofthenon-warrantyrepairwillrequirepaymentintheformofVisa,MasterCard,AmericanExpressorCOD.Customerswithopenaccountstatusmaybebilleddirectly,ifapurchaseorderfortherepairsandshippingisissued.Ifthecustomerdoesnotapprovetherepairsthroughissuingapurchaseorder,thecustomerwillberesponsibleforpayingthe freight charges to ship the product back.


FCC NOTICE:This device complies with Part 15 and Part 90 of the FCC Rules and is listed.

Operational is subject to the following two conditions:1.Thisdevicemaynotcauseharmfulinterference,and2.thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.

ThisequipmentgeneratesRFenergyandifnotinstalledorusedinaccordancewiththeinstructions,maycauseharmful interference to radio communications and other devices. There is no guarantee that interference will not occur.Ifthisequipmentdoescauseharmfulinterference,whichcanbedeterminedbyturningtheequipmentonoroffortransmittingmomentarily,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing methods:•Reorientorrelocatethereceivingantenna.•Increasetheseparationbetweentheequipmentandreceiver.•Connecttheequipmentintoanoutletonacircuitthatisdifferentfromtheonethatthereceiverisconnected.•Consultthedealeroranexperiencedradio/TV/communicationstechnician.

contents safety matters ... button and change the parameter data as needed. 4. press the “write”...

Documents