safety kit - otto nussbaum...
TRANSCRIPT
SMART LIFT2.25 SL, SL E2.28 SL, SL E2.30 SL, SL E2.32 SL, SL E2.35 SL, SL E2.40 SL, SL E
HYMAX S28003000320035004000
Safety KitAssembly instructions
safety-kit.nussbaum-group.de/en
Questions ?
These assembly instructions can also be found as a video and PDF under:
safety-kit.nussbaum-group.de/en
safety-kit.nussbaum-group.de/en
Content
Guide bar 2x
Tools requiredAllen key wrench 5 mmAllen key wrench 3 mmNail puller
Screw M8 2xNuts 2xBase plate 2x Fixing bracket 2x
Time needed: 15 min
safety-kit.nussbaum-group.de/en
Safety system SL
Lift nut
Locking nut
Latch
Capture hook
safety-kit.nussbaum-group.de/en
Preparation
Ensure there is no load on the lift.
Unscrew cover panels
safety-kit.nussbaum-group.de/en
1 Move the carrier arm upwards, then disconnect the lift from mains power or lock the switch
or
safety-kit.nussbaum-group.de/en
2 Plug in the fixing bracket
safety-kit.nussbaum-group.de/en
3 If required, move the latch bar into position with a nail puller
safety-kit.nussbaum-group.de/en
4 Place the guide bar onto the spindle bearing and push from below into the fixing bracket
safety-kit.nussbaum-group.de/en
5 Fasten the guide bar with M8 screwEnsure that the guide bar and slot hole are fastened flush, the guide bar reaches slightly over the edge
safety-kit.nussbaum-group.de/en
Visual inspection Then do another safety inspection to ensure that nothing shifted during screw tightening.
The guide bar and fixing bracket remain installed on the lift.
Have you completed theupdate on both posts?
Now continue on toour sweepstakes
safety-kit.nussbaum-group.de/en
Confirm installation by entering the serial number and
enter to win one of five lifts!
There are 3 ways to win
Simply scan the QR code and confirm onlineor confirm installation at safety-kit.nussbaum-group.de/enor send the enclosed confirmation of installation by fax or post
Each month for five monthswe are giving away
1 SPRINTER mobile liftafter confirmation of safety kit installation.