safety information - featherlite · pdf filefiberglass 4 super-heavy duty fiberglass step csa...

safety information

■ 2

Duty Rated CSA ANSIRating Use Code Code

Duty Rated CSA ANSIRating Use Code Code

SAFETY TIPSFeatherlite manufactures quality products for long and safe use, butproper care must always be taken to ensure your safety. Even the bestladders can be involved in accidents through neglect or improper practices.

Selection• Take into account all potential uses for the product you are going

to purchase - make sure you have the necessary strength andheight for each job.

• Read the labels - Information is provided in detail for your safetyand protection.

• When making your decision on which duty rating you require,ensure you allow for the combined weight of the user, clothing,tools and any other materials.Never exceed the maximum load rating.

Warning:Metal ladders conduct electricity - Do not use where contact may bemade with live electrical circuits. Failure to follow proper instructionscould result in serious personal injury or death.

Inspection• Always inspect your ladder before each use.

• Inspect for loose fasteners, broken, bent or cracked rails, rungs andsteps.

• Ensure moving parts are in good working order.

• Clean ladder of all foreign material. (oil, grease, ice etc.)

• Never use a damaged or worn ladder.

• Never use a ladder which has been exposed to excessive heat orchemical corrosion.

Before you climb...• Do not use any ladder if you are in poor health, taking drugs, using

alcohol, or physically handicapped.

• Check your footwear - Do not use leather or any smooth surfaced sole.

• Do not use in high winds or storm conditions.

• Do not set up over doorways.

PROPER SET UP AND USEStep LaddersMake sure ladder is fully open and spreaders locked.

Set all feet on firm level surface. Do not place on unstable, loose, or slippery surfaces. Place ladder where access is not obstructed. Do notplace in front of unlocked doors. Ladders are not intended to be used asscaffolds.

Climb only front side of ladder. Face ladder when climbing up or down.Maintain a firm grip. Use both hands in climbing.

Keep body centered between side rails. Do not overreach. Get down andmove ladder as needed.

Do not climb, stand, or sit above second step from top. Do not climb,stand, or sit on spreader braces, ladder top, or utility shelf.

Do not straddle front and back. Do not climb from one ladder ontoanother.

Avoid pushing or pulling off to side of ladder. Do not “walk” or “shift”ladder while on it.

Extension & Straight LaddersSet base of ladder on firm level surface.

Do not place on unstable, loose, or slippery surfaces. Do not place in front of unlocked doors. Ladders are not intended to be used as scaffolds.

Secure base section before raising ladder to upright position. Do notmove ladder with fly section extended.

Extend fly section and engage rung locks. Make sure rope does not create a tripping hazard or interfere with activity near ladder. Tying bottom fly rung to adjacent base rung is recommended.

Extend and retract fly section from ground when no one is on ladder.

Position ladder against upper support surface. Make sure ladder does notlean to side. Ladder must make a 75 1/2° angle with the ground.

To establish if ladder is at proper angle – Determine the distance alongthe rail between the top and bottom support points of the ladder. Dividethe distance by 4. The result will be the horizontal distance between thetop and bottom support points.

Face ladder when climbing up or down. Maintain a firm grip. Use bothhands in climbing.

Keep body centered between side rails. Do not overreach.Get down and move ladder as needed.

DUTY RATINGSFeatherlite Ladders are stringently tested to conform where applicable to the requirements of the Canadian Standards Association (CSA), and theAmerican National Standards Institute (ANSI). The appropriate rating is achieved through an extensive series of tests required by the various standards.

It is important to note one major difference between CSA and ANSI. Currently, the maximum CSA rating is Grade 1 - 250 lb; however ANSI encompassestwo additional ratings; Type 1A - 300 lb and Type 1AA - 375 lb. Several Featherlite product lines meet or exceed these additional ratings as notedthroughout the catalogue.

250 lb. Heavy Duty Industrial Grade 1 Type I

300 lb. Extra-Heavy Duty Industrial N/A Type IA

375 lb. Super-Heavy Duty Industrial N/A Type IAA

200 lb. Light Duty Household Grade 3 Type III

225 lb Medium Duty Commercial Grade 2 Type II

3 ■

table of contentsfiberglass

SERIES:

6800, 6400.........................................................................4

6900, 6300.........................................................................5

5800, 6600.........................................................................6

6500, 5900.........................................................................7

9200, 6200.........................................................................8

5700, 5400.........................................................................9

6900, 6300.......................................................................10

5800.................................................................................11

6100, 6100PS, 6100M, 5700S ..........................................11

aluminum4400, 3400.......................................................................12

2400, 1400.......................................................................13

4600, 3600, 3700.............................................................14

4500, 3500, 1300.............................................................15

4200D, 3200.....................................................................16

2200, 1200.......................................................................17

4100, 7100.......................................................................18

rolling steelRolling Steel .....................................................................19

3-way & articulating2700, 3316, 3312, 3312FG...............................................20

telescopicJAWS–JJT, JLT ...................................................................21

accessories & replacement parts...................................................................................22, 23

fiberglass

■ 4

SUPER-HEAVY DUTY FIBERGLASS STEPCSA Approved Grade 1, ANSI Type 1AATHE BRUTE IS OUR STRONGEST AND MOST RUGGED LADDER, DESIGNED AND BUILT TOWITHSTAND A LIFETIME OF DEMANDING INDUSTRIAL USE.

• Extra strong non-conductive “C” channel side rails in high visibility safety yellow• Super tough copolymer top for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Inside spreader arms complete with “wrap-around” sleeves that strengthen spreader-to-rail connection

and protect spreader arms during storage/loading/transit• Each step is double braced with Zinc coated steel diagonal braces providing incredible strength and

stiffness• Full rear "L” horizontal struts reinforced with Zinc coated steel diagonal braces offer maximum rigidity• Heavy-duty aluminum "wrap-around" sleeves at base of rails for maximum protection

EXTRA-HEAVY DUTY FIBERGLASS STEPCSA Approved Grade 1, ANSI Type 1ACANADA’S # 1 FIBERGLASS STEP LADDER

• Durable non-conductive “C” Channel side rails in high visibility safety yellow• Super tough copolymer top for strength and durability• Slip-resistant serrated aluminum steps for safe climbing• Inside spreader arms complete with “wrap-around” brackets to strengthen spreader to rail connection

and protect spreader arms during storage/loading/transport• Reinforced with Zinc coated steel diagonal braces on the front of every other step and double bracing

on bottom step for added strength and stiffness• Full rear “L” horizontal struts reinforced with Zinc coated steel diagonal braces offer maximum rigidity• Extra-large PVC rubber safety boots are heavy-duty and provide increased rail protection and slip-resistance

375 lbRATED

300 lbRATED

HIGHEST APPROX.OPEN STANDING BASE BASE WEIGHT

MODEL SIZE HEIGHT HEIGHT WIDTH DEPTH lbs

6804 4’ 46” 23” 20” 28” 156805 5’ 57” 34” 21” 34” 196806 6’ 68” 45” 23” 39” 276807 7’ 79” 56” 24” 45” 316808 8’ 90” 67” 25” 50” 356810 10’ 113” 90” 29” 61” 446812 12’ 136” 113” 31” 72” 59



6402 2’ 24” 11” 17” 17” 86403 3’ 34” 11” 19” 23” 126404 4’ 46” 23” 20” 28” 156405 5’ 57” 34” 21” 34” 196406 6’ 68” 45” 23” 39” 236407 7’ 79” 56” 24” 44” 276408 8’ 90” 67” 26” 50” 306410 10’ 113” 90” 29” 61” 386412 12’ 137” 114” 32” 74” 52

6400

SER

IES

6800

SER

IES

fiberglass

5 ■

EXTRA-HEAVY DUTY FIBERGLASS STEPCSA Approved Grade 1, ANSI Type 1ATHE ECONOMICAL TYPE 1A ALTERNATIVE

• Durable non-conductive “C” channel side rails in high visibility safety yellow• Super tough copolymer top for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Inside spreader arms complete with “wrap-around” sleeves that strengthen spreader-to-rail connection

and protect spreader arms during storage/loading/transit• Rear horizontal struts every 22", Top and bottom struts reinforced with Zinc coated steel diagonal braces• Reinforced with Zinc coated steel diagonal braces at top and bottom steps• Extra-large PVC rubber safety boots are heavy-duty and provide rail protection and slip-resistance

HEAVY DUTY FIBERGLASS STEPCSA Approved Grade 1, ANSI Type 1HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN ECONOMICAL ALTERNATIVE FOR GENERAL CONTRACTOR AND DIY WORK

• Durable non-conductive “C” channel front rails in high visibility safety orange• Super tough copolymer top for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Rugged outside Zinc coated steel spreader arms• Rear horizontal struts every 22", Top and bottom struts reinforced with Zinc coated steel diagonal braces• Reinforced with Zinc coated steel diagonal braces at top and bottom steps• Heavy-duty slip-resistant safety shoes

300 lbRATED



6903 3’ 34” 11” 19” 23” 126904 4’ 46” 23” 20” 28” 156905 5’ 57” 34” 21” 34” 186906 6’ 68” 45” 23” 39” 216907 7’ 79” 56” 24” 44” 256908 8’ 90” 67” 26” 51” 286910 10’ 113” 90” 29” 61” 366912 12’ 137” 114” 32” 74” 48



6304 4’ 46” 23” 20” 30” 176305 5’ 57” 34” 21” 34” 186306 6’ 68” 45” 23” 43” 206307 7’ 79” 56” 24” 44” 236308 8’ 90” 67” 26” 55” 266310 10’ 113” 90” 29” 61” 34

250 lbRATED

6900

SER

IES

6300

SER

IES

fiberglass

■ 6

MEDIUM DUTY FIBERGLASS STEPCSA Approved Grade 2, ANSI Type 2THE PERFECT LADDER FOR DISCERNING “DIYers”

• Durable non-conductive fiberglass side rails in high visibility safety red• Molded copolymer utility top for holding tools and paint accessories• Fold down utility tray• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Rugged outside Zinc coated steel spreader arms• Reinforced with Zinc coated steel diagonal braces at top and bottom steps• Heavy-duty slip-resistant safety shoes

EXTRA-HEAVY DUTY FIBERGLASS 2-WAY STEPCSA Approved Grade 1, ANSI Type 1ADOUBLE FRONT CONSTRUCTION ALLOWS TWO CLIMBERS TO ACCESS THE LADDER FROM OPPOSITE SIDES

• Durable non-conductive “C” channel side rails in high visibility safety yellow• Wide aluminum top with extra-thick brackets for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Inside spreader arms complete with “wrap-around” sleeves that strengthen spreader-to-rail

connection and protect spreader arms during storage/loading/transit• Reinforced with Zinc coated steel diagonal braces on the front of every other step providing extra rigidity• Extra-large PVC rubber safety boots are heavy-duty and provide rail protection and slip-resistance

300 lbRATED

225 lbRATED



5804 4’ 45” 23” 18” 30” 125805 5’ 57” 34” 20” 35” 155806 6’ 68” 45” 21” 44” 18



6604 4’ 45” 23” 20” 38” 196606 6’ 67” 45” 23” 56” 266608 8’ 90” 67” 26” 72” 366610 10’ 112” 89” 29” 91” 466612 12’ 135” 112” 32” 109” 586614 14’ 160” 138” 36” 122” 796616 16’ 184” 162” 39” 139” 98

5800

SER

IES

6600

SER

IES

fiberglass

7 ■

EXTRA-HEAVY DUTY FIBERGLASS PLATFORM STEPCSA Approved Grade 1, ANSI Type 1AIDEAL FOR ALL TYPES OF FIXED HEIGHT WORK

• Durable non-conductive “C” channel side rails in high visibility safety yellow• Large safe and comfortable standing platform, 14” x 18”• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Rugged outside Zinc coated steel spreader arms• Each step reinforced with Zinc coated steel diagonal braces providing strength and stiffness• Rear horizontal struts every 22” reinforced with Zinc coated steel brace offer maximum rigidity• Heavy-duty slip-resistant safety shoes

EXTRA-HEAVY DUTY FIBERGLASS “GRATE” STEPCSA Approved Grade 1, ANSI Type 1ADESIGNED FOR USE ON GRATED FLOORS

• Durable non-conductive “C” channel side rails in high visibility safety yellow• Front and rear stabilizer feet provide safe surface contact on grated floors• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Inside spreader arms complete with “wrap-around” brackets to strengthen spreader to rail connection

and protect spreader arms during storage/loading/transport• Every other step reinforced with Zinc coated steel diagonal braces providing strength and stiffness• Full rear "L" horizontal struts are reinforced with Zinc coated steel diagonal braces• Stabilizers feature slip-resistant serrated rubber shoes

300 lbRATED

300 lbRATED

6500

SER

IES

VERTICAL APPROX.OPEN HEIGHT TO BASE BASE WEIGHT

MODEL SIZE HEIGHT PLATFORM WIDTH DEPTH lbs

6504 4’ 46” 24” 21” 30” 176505 5’ 57” 35” 23" 36” 226506 6’ 68” 46” 24” 42” 256508 8’ 90” 68” 26” 53” 336510 10’ 113” 92” 29” 67” 416512 12’ 135” 115” 31” 75” 50



5906 6’ 68” 45” 35” 39” 275908 8’ 90” 67” 37” 50” 355910 10’ 113” 90” 40” 61” 445912 12’ 137” 114” 43” 74” 59

5900

SER

IES

■ 8

SUPER-HEAVY DUTY FIBERGLASS EXTENSIONCSA Approved Grade 1, ANSI Type 1AAOUR STRONGEST AND MOST RUGGED FIBERGLASS EXTENSION LADDER, DESIGNEDAND BUILT TO WITHSTAND A LIFETIME OF DEMANDING INDUSTRIAL USE.

• Durable non-conductive fiberglass side rails in high visibility safety yellow• Riveted rung to rail design maintains continuous strength of fibers and allows for easy repair• Slip-resistant serrated “D” rungs for safe climbing and comfort• Traditional raise from the rear pulley design• Premium heavy-duty rung locks for durability• Large heavy-duty pivot feet with slip-resistant rubber pads and ice pick

EXTRA-HEAVY DUTY FIBERGLASS EXTENSIONCSA Approved Grade 1, ANSI Type 1ATHE #1 CHOICE OF CONTRACTORS ACROSS THE COUNTRY

• Durable non-conductive fiberglass side rails in high visibility safety yellow• Riveted rung to rail design maintains continuous strength of fibers and allows for easy repair• Slip-resistant serrated rungs for safe climbing (available in round or “D” profile)• Top cross over bar allows for ladder to be raised or lowered from front and provides torsional stiffness• Premium heavy-duty rung locks for durability• Exclusive “1-Piece” foot assembly with spur wheel provides unequalled strength, durability and

torsion resistance.

300 lbRATED

BASE FLYSECTION SECTION

MAX. OPEN OUTSIDE INSIDE OUTSIDE INSIDE APPROX.MODEL SIZE LENGTH WIDTH WIDTH WIDTH WIDTH WEIGHT lbs

9216-AA 16’ 13’ 17 3/8” 15” 16 5/8” 14 1/4” 409220-AA 20’ 17’ 17 3/8” 15” 16 5/8” 14 1/4” 479224-AA 24’ 21’ 17 3/8” 15” 16 5/8” 14 1/4” 569228-AA 28’ 25’ 17 3/8” 15” 16 5/8” 14 1/4” 649232-AA 32’ 28’ 17 3/8” 15” 16 5/8” 14 1/4” 72



ROU

ND

RU

NG 6216 16’ 13’ 17 3/8” 15” 16 5/8” 14 1/4” 38

6220 20’ 17’ 17 3/8” 15” 16 5/8” 14 1/4” 446222 22’ 19’ 17 3/8” 15” 16 5/8” 14 1/4” 486224 24’ 21’ 17 3/8” 15” 16 5/8” 14 1/4” 526228 28’ 25’ 17 3/8” 15” 16 5/8” 14 1/4” 596232 32’ 28’ 17 3/8” 15” 16 5/8” 14 1/4” 666216D 16’ 13’ 17 3/8” 15” 16 5/8” 14 1/4” 396220D 20’ 17’ 17 3/8” 15” 16 5/8” 14 1/4” 466222D 22’ 19’ 17 3/8” 15” 16 5/8” 14 1/4” 506224D 24’ 21’ 17 3/8” 15” 16 5/8” 14 1/4” 556228D 28’ 25’ 17 3/8” 15” 16 5/8” 14 1/4” 636232D 32’ 28’ 17 3/8” 15” 16 5/8” 14 1/4” 70

*6236D 36' 32' 19” 15 1/2” 17 3/4” 14 1/4” 96*6240D 40' 35' 19” 15 1/2” 17 3/4” 14 1/4” 106* Traditional raise from the rear pulley system

“D”

RUN

G

375 lbRATED

9200

-AA

SER

IES

6200

SER

IES

9200/6200/5700/5400 OPTIONS

fiberglass

Non-slip StripPart #99322

Levelok Leg LevelerPart # 21145

9 ■

EXTRA-HEAVY DUTY FIBERGLASS EXTENSIONCSA Approved Grade 1, ANSI Type 1AA VARIATION OF OUR MOST POPULAR EXTENSION LADDER WITH PIVOT FEET

• Durable non-conductive fiberglass side rails in high visibility safety yellow• Riveted rung to rail design maintains continuous strength of fibers and allows for easy repair• Slip-resistant serrated round rungs for safe climbing• Top cross over bar allows for ladder to be raised and lowered from front and provides torsional stiffness• Premium heavy-duty rung locks for durability• Large heavy-duty pivot feet with slip-resistant rubber pads and ice pick

EXTRA-HEAVY DUTY FIBERGLASS EXTENSIONCSA Approved Grade 1, ANSI Type 1AA VARIATION OF OUR MOST POPULAR EXTENSION LADDER WITH RAISE FROM REAR PULLEY SYSTEM

• Durable non-conductive fiberglass side rails in high visibility safety yellow• Riveted rung to rail design maintains continuous strength of fibers and allows for easy repair• Slip-resistant serrated round rungs for safe climbing• Traditional raise from the rear pulley design• Premium heavy-duty rung locks• Exclusive “1-Piece” foot assembly with spur wheel provides unequalled strength, durability and

torsional stiffness

300 lbRATED

300 lbRATED

5700

SER

IES

5400

SER

IES

9200/6200/5700/5400 OPTIONS



5716 16’ 13’ 17 3/8” 15” 16 5/8” 14 1/4” 385720 20’ 17’ 17 3/8” 15” 16 5/8” 14 1/4” 445724 24’ 21’ 17 3/8” 15” 16 5/8” 14 1/4” 525728 28’ 25’ 17 3/8” 15” 16 5/8” 14 1/4” 595732 32’ 28’ 17 3/8” 15” 16 5/8” 14 1/4” 66



5416 16’ 13’ 17 3/8” 15” 16 5/8” 14 1/4” 385420 20’ 17’ 17 3/8” 15” 16 5/8” 14 1/4” 445424 24’ 21’ 17 3/8” 15” 16 5/8” 14 1/4” 525428 28’ 25’ 17 3/8” 15” 16 5/8” 14 1/4” 595432 32’ 28’ 17 3/8” 15” 16 5/8” 14 1/4” 66

fiberglass

Swivel “V” RungPart # 99125

Pole StrapPart # 99061

Rigid “V” RungPart # 99130

Rubber End CapsPart # 99129

Cable HooksPart # 99063

fiberglass

■ 10

EXTRA-HEAVY DUTY FIBERGLASS EXTENSIONCSA Approved Grade 1, ANSI Type 1ATHE ECONOMICAL TYPE 1A ALTERNATIVE

• Durable non-conductive fiberglass side rails in high visibility safety yellow• Rung through rail design• Slip-resistant serrated “D” rungs for safe climbing and comfort• Premium heavy-duty rung locks for durability• Black ABS, high impact non-marring end caps• Large heavy-duty pivot feet with slip-resistant rubber pads and ice pick



6916 16’ 13’ 17” 14 5/8” 16 1/2” 14 1/4” 366920 20’ 17’ 17” 14 5/8” 16 1/2” 14 1/4” 426924 24’ 21’ 17” 14 5/8” 16 1/2” 14 1/4” 506928 28’ 25’ 17” 14 5/8” 16 1/2” 14 1/4” 566932 32’ 28’ 17” 14 5/8” 16 1/2” 14 1/4” 62



6316 16’ 13’ 17” 14 5/8” 16 1/2” 14 1/4” 316320 20’ 17’ 17” 14 5/8” 16 1/2” 14 1/4” 366324 24’ 21’ 17” 14 5/8” 16 1/2” 14 1/4” 43

HEAVY DUTY FIBERGLASS EXTENSIONCSA Approved Grade 1, ANSI Type 1HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN ECONOMICAL ALTERNATIVE FOR GENERAL CONTRACTORS AND DIY WORK

• Durable non-conductive fiberglass side rails in high visibility safety orange• Rung through rail design• Slip-resistant serrated “D” rungs for safe climbing and comfort• Premium heavy-duty rung locks for durability• Black ABS, high impact non-marring end caps• Large heavy-duty pivot feet with slip-resistant rubber pads and ice pick

300 lbRATED

250 lbRATED

6900

SER

IES

6300

SER

IES

fiberglass

APPROX.OUTSIDE INSIDE WEIGHT

MODEL SIZE WIDTH WIDTH lbs

6108PS 8’ 17 3/8” 15” 196110PS 10’ 17 3/8” 15” 226112PS 12’ 17 3/8” 15” 256114PS 14’ 17 3/8” 15” 296116PS 16’ 17 3/8” 15” 33



6108M 8’ 14 3/8” 12” 186110M 10’ 14 3/8” 12” 21

*6112M 12’ 14 3/8” 12” 24*6114M 14’ 14 3/8” 12” 28*6116M 16’ 14 3/8” 12” 32*Meets or exceeds CSA Grade 1



5708 8’ 17 3/8” 15” 185710 10’ 17 3/8” 15” 215712 12’ 17 3/8” 15” 245714 14’ 17 3/8” 15” 28

11 ■

MEDIUM DUTY FIBERGLASS EXTENSIONCSA Approved Grade 2, ANSI Type 2• Durable non-conductive fiberglass side rails in high visibility safety red• Rung through rail design• Slip-resistant serrated “D” rungs for safe climbing• Premium heavy-duty rung locks for durability• Black ABS, high impact non-marring end caps• Large heavy-duty pivot feet with slip-resistant rubber pads and ice pick



5820 20’ 17’ 17” 15” 16 1/4” 14 1/2” 325824 24’ 21’ 17” 15” 16 1/4” 14 1/2” 38



6108 8’ 17 3/8” 15” 186110 10’ 17 3/8” 15” 216112 12’ 17 3/8” 15” 246114 14’ 17 3/8” 15” 286116 16’ 17 3/8” 15” 32

EXTRA-HEAVY DUTY STRAIGHT LADDERSCSA Approved Grade 1, ANSI Type 1AIDEAL FOR FIXED HEIGHT OR CONFINED SPACE APPLICATIONS

• Durable non-conductive fiberglass side rails in high visibility safety yellow• Riveted rung to rail design maintains continuous strength of fibers and allows for easy repair• Slip-resistant serrated round rungs for safe climbing• Black ABS, high impact non-marring end caps• 6100 and 6100PS Series feature the exclusive “1-Piece” foot assembly with spur wheel

providing unequalled strength, durability and torsion resistance• 5700 Series feature large heavy-duty pivot feet with slip-resistant rubber pads and ice pick• 6100M Series feature large heavy-duty duo feet with slip-resistant rubber pads and ice pick

300 lbRATED

5700

SER

IES

225 lbRATED

5800

SER

IES

6100

SER

IES

6100

PS S

ERIE

S

6100

M S

ERIE

S

aluminum

■ 12

EXTRA-HEAVY DUTY ALUMINUM STEPCSA Approved Grade 1, ANSI Type 1ABUILT TO LAST IN ANY INDUSTRIAL APPLICATION

• Super tough copolymer top for strength and durability• Extra-wide 3 1/2” slip-resistant serrated aluminum steps for safe climbing• Solid triangular braces on steps and rear horizontal struts provide unequalled rigidity• Rugged outside zinc coated steel spreader arms• Heavy duty hinged utility tray for holding tools and paint accessories (10"x 10")• Heavy-duty slip-resistant safety shoes

EXTRA-HEAVY DUTY ALUMINUM STEPCSA Approved Grade 1, ANSI Type 1AHIGH STRENGTH TO WEIGHT RATIO PROVIDES AN ECONOMICAL ALTERNATIVE FOR GENERAL CONTRACTOR WORK

• Super tough copolymer top for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Rugged outside Zinc coated steel spreader arms• Heavy duty hinged utility tray for holding tools and paint accessories (10 x 10)• Heavy-duty slip-resistant safety shoes

300 lbRATED

300 lbRATED

4400

SER

IES

3400

SER

IES



4404 4’ 46” 24” 20” 29” 144406 6’ 68” 46” 23” 41” 204408 8’ 90” 68” 26” 54” 264410 10’ 113” 91” 29” 66” 334412 12’ 135” 114” 32” 78” 414414 14’ 158” 134” 35” 88” 514416 16’ 181” 160” 38” 102” 59



*3402 2’ 22” 11” 16” 18” 5*3403 3’ 34” 23” 17” 24” 83404 4’ 46” 24” 19” 29” 123405 5’ 57” 34” 20” 35” 143406 6’ 68” 46” 21” 41” 173408 8’ 91” 68” 24” 54” 223410 10’ 114” 91” 26” 66” 28

* no utility tray

aluminum

13 ■

MEDIUM DUTY ALUMINUM STEPCSA Approved Grade 2, ANSI Type 2THE FINEST TRADESMAN STEP ON THE MARKET

• Durable yet light weight extruded side rails• Molded copolymer utility top for holding tools and paint accessories• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Outside “J“ spreader arms• Rubber slip-resistant safety shoes

LIGHT DUTY ALUMINUM STEPCSA Approved Grade 3, ANSI Type 3IDEAL FOR CHORES AROUND THE HOUSE

• Strong yet light weight extruded side rails• Molded copolymer utility top for holding tools and paint accessories• Fold down utility tray • Wide 3” slip-resistant serrated aluminum steps for safe climbing• Outside pinch-proof spreader arms• Slip-resistant safety shoes

200 lbRATED

225 lbRATED



2404 4’ 45” 24” 18” 31” 92405 5’ 56” 34” 20” 38” 112406 6’ 67” 45” 21” 44” 132407 7’ 79” 56” 22” 50” 162408 8’ 90” 67” 24” 56” 192410 10’ 112” 90” 26” 70” 23



1404 4’ 46” 24” 17” 26” 91405 5’ 57” 34” 19” 32” 101406 6’ 68” 44” 20” 37” 12

2400

SER

IES

1400

SER

IES

aluminumEXTRA-HEAVY DUTY ALUMINUM 2-WAY STEPCSA Approved Grade 1, ANSI Type 1ADOUBLE FRONT CONSTRUCTION ALLOWS TWO CLIMBERS TO ACCESS THE LADDER FROM OPPOSITE SIDES

• Wide aluminum top with extra-thick brackets for strength and durability• Wide 3 1/2” slip-resistant serrated aluminum steps for safe climbing• Solid triangular step braces provide unequalled rigidity• Outside “J” spreader arms• Heavy-duty slip-resistant safety shoes

HEAVY DUTY ALUMINUM SAWHORSETHE IDEAL DRYWALL AND GENERAL CONTRACTOR’S ACCESS TOOL

• Wide aluminum top for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Outside “J” spreader arms• Rubber slip-resistant safety shoes• Different sizes can be combined for planking applications

HEAVY DUTY 2-WAY STEPCSA Approved Grade 1, ANSI Type 1DOUBLE FRONT CONSTRUCTION ALLOWS TWO CLIMBERS TO ACCESS THE LADDER FROM OPPOSITE SIDES

• Aluminum top for strength and durability• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Outside “J” spreader arms• Heavy-duty slip-resistant safety shoes

■ 14



4606 6’ 67” 46” 23” 56” 254608 8’ 90” 68” 26” 73” 324610 10’ 112” 90” 29” 89” 41



3604 4’ 44” 23” 19” 39” 143606 6’ 68” 45” 21” 57” 213608 8’ 90” 67” 24” 72” 293610 10’ 112” 89” 26” 89” 36

3600

SER

IES

250 lbRATED

APPROX.OPEN BASE BASE WEIGHT

MODEL SIZE HEIGHT WIDTH DEPTH lbs

3702 2’ 23” 32” 25” 103703 3’ 35” 34" 32” 143704 4’ 47" 35" 39” 19

300 lbRATED

4600

SER

IES

3700

SER

IES

aluminum

LIGHT DUTY ALUMINUM PLATFORM STEPCSA Approved Grade 3, ANSI Type 3IDEAL FOR PAINTING AND CHORES AROUND THE HOUSE

• 1” tubular construction, makes this ladder light weight and allows for compact storage• Handrail with comfort foam grip for added safety• Fold down utility tray for tools and paint accessories• Rubber slip-resistant safety feet• Platform provides a large safe and comfortable standing area

EXTRA-HEAVY DUTY ALUMINUM PLATFORM STEPCSA Approved Grade 1, ANSI Type 1AIDEAL FOR INDUSTRIAL FIXED HEIGHT WORK

• Large comfortable slip-resistant platform, 14” x 18”• Wide 3 1/2” slip-resistant serrated aluminum steps for safe climbing• Solid triangular braces on steps and rear horizontal struts provide unequalled rigidity• Outside “J” spreader arms• Heavy-duty slip-resistant safety shoes

300 lbRATED

HEAVY DUTY ALUMINUM PLATFORM STEPCSA Approved Grade 1, ANSI Type 1IDEAL FOR IN FIXED GENERAL HEIGHT WORK

• Large comfortable slip-resistant platform, 14” x 18”• Wide 3” slip-resistant serrated aluminum steps for safe climbing• Outside “J” spreader arms• Heavy-duty slip-resistant safety shoes

15 ■

4500

SER

IES

1300

SER

IES

HEIGHT APPROX.OPEN TO BASE BASE WEIGHT


4506 6’ 68” 46” 24” 42” 224508 8’ 93” 69” 27” 54” 284510 10’ 113” 92” 30” 65” 354512 12’ 135” 115” 33” 78” 434514 14’ 157” 136” 36” 87” 524516 16’ 180” 158” 39” 102” 60



3504 4’ 46” 23” 21” 28” 133506 6’ 68” 46” 24” 42” 193508 8’ 90” 68” 26” 54” 243510 10’ 114” 92” 29” 66” 30

250 lbRATED



1304 4’ 55” 22” 18" 27" 8

200 lbRATED

3500

SER

IES

aluminum

■ 16

EXTRA-HEAVY DUTY ALUMINUM EXTENSIONCSA Approved Grade 1, ANSI Type 1AOUR SIGNATURE PRODUCT—POSSIBLY THE BEST DESIGNED AND MANUFACTURED LADDER IN THE WORLD

• Rigid “Box Section” side rails, unequalled for strength and durability• Side-mounted rope pulley and slide guide system keeps rope clear of climbers feet and allows easy

raising and lowering of the fly section.• Yellow ABS, high impact non-marring end caps• Premium heavy-duty rung locks• Slip-resistant serrated “D” rungs for safe climbing and comfort• Heavy-duty ribbed swivel feet with ice pick• 16’ through 28’ models have 2 7/8” x 7/8” side rails• 32’ through 44’ models have 3 1/4” x 1” side rails

EXTRA-HEAVY DUTY ALUMINUM EXTENSIONCSA Approved Grade 1, ANSI Type 1ARUGGED “I” BEAM EXTENSION SUITABLE FOR DEMANDING INDUSTRIAL APPLICATIONS

• Heavy-duty “I” beam construction, 3 1/16” x 1 1/4” rails provide stability, torque resistance andhigh strength to weight ratio

• Heavy-duty serrated rungs prevent slipping for safe and sure climbing. (available in round or “D” profile)• Yellow ABS, high impact non-marring end caps• Premium heavy-duty rung locks• Heavy-duty ribbed swivel feet with ice picks



4216D 16’ 13’ 17” 15 1/4” 14 1/2” 12 3/4” 294220D 20’ 17’ 17” 15 1/4” 14 1/2” 12 3/4” 374224D 24’ 21’ 17” 15 1/4” 14 1/2” 12 3/4” 444228D 28’ 25’ 17” 15 1/4” 14 1/2” 12 3/4” 504232D 32’ 29’ 18 1/2” 16 1/2” 15 7/8” 13 7/8” 694236D 36’ 32’ 18 1/2” 16 1/2” 15 7/8” 13 7/8” 784240D 40’ 35’ 18 1/2” 16 1/2” 15 7/8” 13 7/8” 864244D 44’ 39’ 18 1/2” 16 1/2” 15 7/8” 13 7/8” 94

*4360 60’ 50’ 21 3/4” 19” 16” 14” 128

*THREE SECTION EXTENSION, MIDDLE SECTION OUTSIDE WIDTH: 18 1/2”,INSIDE WIDTH: 16 1/2”

*ROUND RUNG *NOT CSA APPROVED



3216D 16’ 13’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 313220D 20’ 17’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 363224D 24’ 21’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 433228D 28’ 25’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 533232D 32’ 29’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 603236D 36’ 32’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 693240D 40’ 35’ 17 3/4” 15 1/4” 16 1/8” 13 5/8” 77

300 lbRATED

“D”

RUN

G

4200

D S

ERIE

S

300 lbRATED

3200

SER

IES

aluminum



1216 16’ 13’ 13 1/4” 11 3/8” 12 3/8” 10 1/2” 201220 20’ 17’ 13 1/4” 11 3/8” 12 3/8” 10 1/2” 241224 24’ 21’ 13 1/4” 11 3/8” 12 3/8” 10 1/2” 30



3216 16’ 13’ 17 5/8” 15 1/8” 16” 13 1/2” 293220 20’ 17’ 17 5/8” 15 1/8” 16” 13 1/2” 343224 24’ 21’ 17 5/8” 15 1/8” 16” 13 1/2” 413228 28’ 25’ 17 5/8” 15 1/8” 16” 13 1/2” 503232 32’ 29’ 17 5/8” 15 1/8” 16” 13 1/2” 573236 36’ 32’ 17 5/8” 15 1/8” 16” 13 1/2” 663240 40’ 35’ 17 5/8” 15 1/8” 16” 13 1/2” 73

17 ■

MEDIUM DUTY ALUMINUM EXTENSIONCSA Approved Grade 2, ANSI Type 2THE FINEST TRADESMAN EXTENSION ON THE MARKET

• Sturdy extruded “C” channel construction• Slip-resistant serrated “D” rungs for safe climbing and comfort• Black ABS, high impact, non-marring end caps• Premium heavy-duty rung locks• Heavy-duty swivel feet with ice picks



2216 16’ 13’ 15 1/4” 13 3/8” 14 3/8” 12 1/2” 242220 20’ 17’ 15 1/4” 13 3/8” 14 3/8” 12 1/2” 312224 24’ 21’ 15 1/4” 13 3/8” 14 3/8” 12 1/2” 362228 28’ 25’ 15 1/4” 13 3/8” 14 3/8” 12 1/2” 412232 32’ 29’ 17 3/16” 15 1/4” 16 3/8” 14 3/8” 502236 36’ 32’ 17 3/16” 15 1/4” 16 3/8” 14 3/8” 602240 40’ 36’ 17 3/16” 15 1/4” 16 3/8” 14 3/8” 68

LIGHT DUTY ALUMINUM EXTENSIONCSA Approved Grade 3, ANSI Type 3IDEAL FOR CHORES AROUND THE HOUSE

• Strong extruded “C” channel construction• Slip-resistant serrated “D” rungs for safe climbing and comfort• High impact, non-marring end caps• Swivel feet with ice picks

2200

SER

IES

225 lbRATED

200 lbRATED

ROU

ND

RU

NG

1200

SER

IES

aluminum

■ 18

EXTRA-HEAVY DUTY ALUMINUM STRAIGHT LADDERCSA Approved Grade 1, ANSI Type 1ABUILT FOR DEMANDING INDUSTRIAL APPLICATIONS

• Rigid “Box Section” side rails, unequalled for strength and durability• Yellow ABS, high impact non-marring end caps• Slip-resistant round serrated aluminum rungs• Heavy-duty ribbed swivel feet

HEAVY DUTY STRAIGHT LADDERCSA Approved Grade 1, ANSI Type 1HIGH STRENGTH TO WEIGHT RATIO PROVIDES AN EASILY PORTABLE INDUSTRIAL STRAIGHT LADDER

• Heavy duty “C” channel rail construction• Side rails: 2 1/2” x 1” for sizes 8’ through 14’• Side rails: 3” x 1” for sizes 16’ through 20’• Slip-resistant serrated “D” rungs for safe climbing and comfort• Black ABS, high impact non-marring end caps• Heavy-duty ribbed swivel feet

300 lbRATED

MODEL SIZE OUTSIDE WIDTH INSIDE WIDTH APPROX. WEIGHT lbs

4108 8’ 14 5/8” 12 7/8” 134110 10’ 14 5/8” 12 7/8” 164112 12’ 14 5/8” 12 7/8” 194114 14’ 14 5/8” 12 7/8” 224116 16’ 14 5/8” 12 7/8” 254118 18’ 14 5/8” 12 7/8” 284120 20’ 14 5/8” 12 7/8” 314122 22’ 15 3/4" 13 3/4" 414124 24’ 15 3/4" 13 3/4" 44

MODEL SIZE OUTSIDE WIDTH INSIDE WIDTH APPROX. WEIGHT lbs

7108 8’ 16 3/4” 14 5/8” 107110 10’ 16 3/4” 14 5/8” 137112 12’ 16 3/4” 14 5/8” 157114 14’ 16 3/4” 14 5/8” 187116 16’ 16 3/4” 14 5/8” 237118 18’ 16 3/4” 14 5/8” 277120 20’ 16 3/4” 14 5/8” 29

250 lbRATED

4100

SER

IES

7100

SER

IES

rolling steel

19 ■

APPROXPLATFORM STEP BASE BASE WHEEL SHIPPING WEIGHT

MODEL STEPS HEIGHT WIDTH WIDTH DEPTH ASSEMBLY SIZE lbs

1NH 1 9” 24” 26” 19” 3” Spring Loaded Caster 26” x 20” x 10” 302NH 2 18” 24” 26” 24 1/2” 3” Spring Loaded Caster 26” x 24” x 18” 403NH 3 27” 24” 26” 29 1/2” 3” Spring Loaded Caster 26” x 31” x 27” 534NH 4 36” 24” 26” 32 1/2” 3” Spring Loaded Caster 26” x 40” x 36” 625NH 5 45” 24” 26” 38” 3” Spring Loaded Caster 26” x 44” x 45” 95

APPROXPLATFORM STEP BASE BASE WHEEL SHIPPING WEIGHT

MODEL STEPS HEIGHT WIDTH WIDTH DEPTH ASSEMBLY SIZE lbs

1H 1 9” 24” 26” 19” 3” Spring Loaded Caster 26” x 20” x 52” 322H 2 18” 24” 26” 24 1/2” 3” Spring Loaded Caster 26” x 24” x 60” 423H 3 27” 24” 26” 29 1/2” 3” Spring Loaded Caster 26” x 31” x 69” 554H 4 36” 24” 33” 34 1/2” 5’ Front Caster, 6” Rear Wheels 33” x 40” x 78” 875H 5 45” 24” 33” 40” 5’ Front Caster, 6” Rear Wheels 33” x 44” x 87” 976H 6 54” 24” 33” 45 1/4” 5’ Front Caster, 6” Rear Wheels 33” x 44” x 9’ 1117H 7 63” 24” 33” 50 1/2” 5’ Front Caster, 6” Rear Wheels 33” x 44” x 10’ 1228H* 8 72” 28” 36” 55 3/4” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 10 1/2’ 1429H* 9 81” 28” 36” 61” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 11’ 154

10H* 10 90” 28” 36” 66 1/4” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 12’ 16611H* 11 99” 28” 36” 71 1/2” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 13’ 17812H* 12 108” 28” 36” 76 1/4” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 14’ 19013H* 13 117” 28” 36” 82” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 15’ 20214H* 14 126” 28” 36” 87 1/4” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 15 1/2’ 21415H* 15 135” 28” 36” 92” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 16 1/2’ 22616H* 16 144” 28” 36” 97 3/4” 5’ Front Caster, 6” Rear Wheels 36” x 37” x 17’ 238

ROLLING STEELMEETS OR EXCEEDS CSA SAFETY STANDARDS AS PER ANSI A14.7

NO HAND RAILS SERIES• 15” Platform depth• 1” 16 ga. Round tubing construction• 3” Swivel spring loaded casters• 24” wide x 7 1/2” deep non-slip

perforated step material• 26” Overall width• No Hand rail• Painted blue enamel

42” HAND RAILS SERIES• 15” Platform depth• 1” 16 ga. Round tubing construction• 6” x 2” Polyolefin rear wheels• 5” x 1 1/4” RSX rubber swivel casters• 24” Wide x 7 1/2” deep non-slip

perforated step material• 42” High hand rail• Painted blue enamel

NO HAND RAILS SERIES

42” HAND RAILS SERIES

* collapsed for shipping

300 lbRATED

3-way & articulatingHEAVY DUTY ALUMINUM 3-WAYCSA Approved Grade 1, ANSI Type 1A TOUGH VERSATILE LADDER FOR TRADESMEN OR DIY’ers

• Easily converts from a step ladder to extension to stairway ladder that locks surely andsafely into all positions

• Durable extruded aluminum rails and slip-resistant serrated steps and rungs• Heavy duty hardware to ensure rigidity in all positions• Fixed rubber safety shoes on front section, swivel feet on back section• Black ABS, high impact non-marring end caps

HEAVY DUTY FIBERGLASS ARTICULATING LADDERCSA Approved Grade 1, ANSI Type 1A NON-CONDUCTIVE MULTI-PURPOSE LADDER FOR COMMERCIAL OR RESIDENTIAL JOBS

• Compact and multifunctional• Sturdy non-conductive fiberglass “C” channel construction• Serrated rungs prevent slipping for safe sure climbing• Positive, visual hinge locking indication in any position• Folds easily for storage and transport• Stabilizer feet on each end that provide superior stability

ALUMINUM ARTICULATING LADDERMODEL 3316 - CSA Approved Grade 1, ANSI Type 1AMODEL 3312 - CSA Approved Grade 1, ANSI Type 1A VERSATILE TOOL FOR A WIDE VARIETY OF COMMERCIAL AND RESIDENTIAL JOBS

• Compact and multifunctional• Sturdy “C” channel rail construction• Serrated rungs prevent slipping for safe sure climbing• Positive, visual hinge locking indication in any position• Folds easily for storage and transport• 3316 has stabilizer feet on each end that provide superior stability• 3312 has flared ends for excellent stability

300 lbRATED

■ 20

STEP EXTENSION MAX. EXTENSION APPROX.MODEL SIZE SIZE OPEN LENGTH WEIGHT lbs

2706 6’ 12’ 9’ 222707 7’ 14’ 11’ 252708 8’ 16’ 13’ 28

STEP EXTENSION SCAFFOLD APPROX.MODEL SIZE SIZE SIZE WEIGHT lbs

3312 6’ 12’ 3’ 263316 8’ 16’ 4’ 46

STEP EXTENSION SCAFFOLD APPROX.MODEL SIZE SIZE SIZE WEIGHT lbs

3312FG 6’ 12’ 3’ 30

250 lbRATED

250 lbRATED

2700

SER

IES

3316

SER

IES

250 lbRATED

3312 SERIES

3312

FG S

ERIE

S

telescopic

21 ■

STEP APPROX.FOLDED EXTENSION WORKING LADDER SCAFFOLD WEIGHT

MODEL HEIGHT RANGE HEIGHT RANGE HEIGHT lbs

JJT 14 3’5” 6’3” to 10’6” 6’3” to 14’0” 3’2” to 5’3” Up to 3’ 21JJT 17 4’5” 7’3” to 14’6” 7’3” to 17’0” 4’2” to 7’3” Up to 4’ 26

JLT 18 4’9” 9’0” to 15’0” 9’0” to 18’0” 4’6” to 7’6” Up to 4’ 36JLT 22 5’9” 11’0” to 19’0” 11’0” to 22’0” 5’6” to 9’6” Up to 5’ 41JLT 26 6’9” 13’0” to 23’0” 13’0” to 26’0” 6’6” to 11’6” Up to 6’ 50

JAWS TELESCOPIC LADDERJLT SERIES - CSA Approved Grade 1, ANSI Type 1AAJJT SERIES - CSA Approved Grade 1, ANSI Type 1THE STRONGEST BEST BUILT MULTI-POSITION LADDER SYSTEM AVAILABLE

• Compact and multifunctional, Replaces all conventional ladders• Easily folds for storage or transport• Flared ends with slip-resistant feet provide superior stability in any position• Polymer rung locks are virtually indestructible• Extra deep side rails make Jaws stiffer and stronger• Mechanical interlocking tooth hinges for superior strength and 5 locking positions• Extruded 6061-T6 marine alloy—for strength and corrosion resistance• Welded outer rungs• JLT Series has Extra-strong “Box-beam” rails for maximum strength and durability• JJT Series has wide inner steps for comfort

250 lbRATED

375 lbRATED

JJT

SERI

ES

Leg Leveler Part #JLL30 Utility Tray Part #JUT20Wall Stand-off Part #WSO40 Step/Tray Part #JIS10 *JLT Series Only

JLT

SERI

ES

accessories & replacement parts

■ 22

TOP CAP SAFETY FEET UTILITY TRAYS 4 S

FIBERGLASSSTEPS

99180 99003 9916399180 99105 N/AN/A 99004 N/AN/A 99005 N/AN/A 99105 N/A99180 99003 9916399180 99105 9916399180 N/A 9916399002 99105 99006

690068006600 (4' to 12')6600 (14' & 16')65006400630059005800

* Spreader arms are available, please specify left or right side, model and size* NEW RUBBER BOOT FOR 6400, 6900, AND 6600

TOP CAP SAFETY FEET UTILITY TRAYS 4 S

ALUMINUMSTEPS

N/A 99104 N/AN/A 99102 N/A99180 99102 99164N/A 99139 N/AN/A 99106 N/AN/A 99105 N/A99181 99105 9916399002 99101 9901999016 99008 99007

460045004400370036003500340024001400

* Spreader arms are available, please specify left or right side, model and size

PULLEY RUNG FLY BASE SAFETY END CAP & BRACKET LOCKS RUNG RUNG FEET

P S P S S PFIBERGLASS EXTENSIONS

99122 99017 99186 99170-F 99170-B 9913199122 99011 99186 N/A N/A 9913199122 99011 99186 N/A N/A 9913199122 99009 99128 99171-F 99171-B 9912399122 99009 99186 99170-F 99170-B 9912399018 99010 21122 99012-F 99012-B 9901499122 99011 99186 N/A N/A 9913199122 99009 99128 99171-F 99171-B 9913199122 99135-ET 99128 99171-F 99171-B 99123

92006900630062006200D (16' to 32')6200D (36' & 40')580057005400

* Replacement rope available, please specify ladder model and size when ordering (available in White Marine Grade, Yellow Poly or Black Poly.)

Utility Tray Part #99163fits 6300, 6400, 6900 Series

Utility Tray Part #99019fits 2400 Series

Wall Stand-off Part #WSO40

Wheels Part #99326

LEVELOK Leg Leveler Part #21145

Wall Stand-offPart #99066

Roof Ladder Lock Part #99062

P= PAIR S=SINGLE

23 ■

COMPLETE` KNOBHINGE AND SPREADER RUNG OUTSIDE OUTSIDE INSIDELOCK BOLT ELD BAR END CAP SECTION FOOT FOOT

S S S S S S S S

JAWS

ZZZ06 ZZZ02A ZZZ07 ZZZ10 ZZZ03 ZZZ26 ZZZ08 ZZZ09ZZZ06 ZZZ02A ZZZ07 ZZZ10 ZZZ03 ZZZ12 ZZZ08 ZZZ09ZZZ06 ZZZ02A ZZZ07 ZZZ10 ZZZ03 ZZZ11 ZZZ08 ZZZ09ZZZ13 ZZZ02B ZZZ14 ZZZ10 ZZZ03 ZZZ19 ZZZ15 ZZZ16ZZZ13 ZZZ02B ZZZ14 ZZZ23 ZZZ03 ZZZ18 ZZZ15 ZZZ16

JLT26JLT22JLT18JJT17JJT14

END CAP RUNG LOCKS SAFETY FEETP P P

ALUMINUM EXTENSIONS

99155 99191 9911699118 99185 9911699119 99185 9911699113 99128 9911499113 99186 9911499172 99186 9910999173 99186 9910999015 99186 99109

43604200D (16' to 28')4200D (32' to 44')32003200D2200 (16' TO 20')2200 ( 24' TO 40')1200

* Replacement rope available, please specify ladder model and size when ordering(available in White Marine Grade,Yellow Poly or Black Poly.)

END CAP RUNG FEETP S P

STRAIGHTS

99172 N/A 9910899122 99171-B 9912399122 99171-B 9912399122 99171-F 9912799122 99171-B 9913199118 N/A 9911699119 N/A 99116

710061006100PS6100MH57004100 (8' to 10')4100 (22' to 24')

* Replacement rope available, please specify ladder model and size when ordering(available in White Marine Grade,Yellow Poly or Black Poly.)

KNOB AND BOLT FootS S

MULTIS

ZZZ02B ZZZ21ZZZ02A N/AZZZ02B N/A

331233163312FG

replacement partsTop Cap

Utility Tray

Spreader Arms

Safety Feet

End Caps

Pulley & Bracket

Rope

Rung Locks

Fly Rung

Base Rung

Safety Feet

ZZZ06ZZZ13

ZZZ02ZZZ07ZZZ14

ZZZ11ZZZ12ZZZ18ZZZ26ZZZ19

ZZZ03

ZZZ08ZZZ15

ZZZ09ZZZ16

KeepSafe

Do you have a specific ladder safety question?…Or wish to contribute to ladder safe-work practices?

Contact the Featherlite “Ladder Expert”

Call 1-800-867-5233 8:00 am – 4:00 pm Monday to FridayOR

Visit our Website at www.featherlite.ca

HEAD OFFICE:100 Engelhard Drive

Aurora, Ontario, Canada L4G 3V2Tel: (905) 727-0031Fax: (905) 727-7271

B.C. REGIONAL WAREHOUSE:7205 Brown Street, Unit 109

Delta, British Columbia, Canada V4G 1G5Tel: (604) 940-2972Fax: (604) 940-2973

QUEBEC REGIONAL WAREHOUSE:2001 Francis Hughes

Laval, Quebec, Canada H7S 2G2Tel: (450) 668-4610Fax: (450) 668-4611

safety information - featherlite · pdf filefiberglass 4 super-heavy duty fiberglass step csa...

Documents