MAKE: STYLE:

MIN.20

WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY

WEIGHT CARRYING:

INSTALLATION TIPS:

INSTALLATION REQUIRES:

VEHICLE PHOTO:

HITCH ILLUSTRATION:

REPRESENTATIVE PHOTO

MAKE SURE YOUR HITCH MATCHES

LEVEL OF DIFFICULTY: EASY

EASY MODERATE CHALLENGING

1. BEFORE YOU BEGIN INSTALLATION, READ ALL INSTRUCTIONS THOROUGHLY. 2. TO EASE INSTALLATION, 2 PEOPLE MAY BE REQUIRED. 3. USING PROPER TOOLS WILL GREATLY IMPROVE THE QUALITY OF THE INSTALL AND REDUCE THE TIME REQUIRED.

Safety glasses should be worn at all times whileinstalling this product.

YEARS: 2014-PRESENT ACURA MODEL: MDX SUV

6000900

TRAILER WEIGHT:TONGUE WEIGHT:

13146 INSTALLATION INSTRUCTIONS

LBS.LBS.

WEIGHT DISTRIBUTION: TRAILER WEIGHT:TONGUE WEIGHT:

8000900

LBS.LBS.

MIN.40

IF YOU ARE HESITANT TO UNDERTAKETHIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED

CURT INSTALLER FOR ADDITIONAL ASSISTANCE.

NOVICE INSTALL TIME: PRO INSTALL TIME:

RATCHET SOCKET

22mm

TORQUEWRENCH

SOCKETEXTENSION

6"

SAFETYGLASSES

- TEMPORARILY LOWER SPARE TIRE

- NO DRILLING REQUIREDWIRE PIPE

BRUSH

-WELDNUT CLEANING MAYBE REQUIRED

INSTALLATION WALKTHROUGH:

Parts ListDESCRIPTIONPART NUMBERQTYITEM

HEX BOLTM14 - 1.5 x 40 HEX61CONICAL TOOTHED WASHER9/16" CONICAL WASHER62

1

2

PASSENGERSIDE FRAME

DRIVER SIDE FRAME

EXISTING WELDNUTS

1. Lower spare tire from inside of vehicle by using the tools under storage compartment (as shown).

2. Weldnut cleaning may be required. Raise hitch into position and secure with the M14 hardware provided. Torque M14 bolts to 139 lb-ft.

3. Raise spare tire back into place following step 1's instructions. Install complete.

INSTALLATION STEPS

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERSARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.

ACURA MDX13146

40

49

20

HITCH WEIGHT: LBS.

INSTALL TIME

PROFESSIONAL: MINUTES

NOVICE (DIY): MINUTES

INSTALL NOTES:

Parts ListDESCRIPTIONPART NUMBERQTYITEM

HEX BOLTM14 - 1.5 x 40 HEX61CONICAL TOOTHED WASHER9/16" CONICAL WASHER62

TOOLS REQUIREDRATCHET

22mm SOCKET6" EXTENSION

TORQUE WRENCH WIRE PIPE BRUSH

1

2

EXISTING WELDNUTS

DRIVER SIDE FRAME

PASSENGER SIDE FRAME

1. Lower spare tire from inside of vehicle by using the tools under storage compartment. 2. Weldnut cleaning may be required. Raise hitch into position and secure with the M14 hardware provided. Torque M14 bolts to 139 lb-ft. 3. Raise spare tire back into place following step 1's instructions.

- NO DRILLING REQUIRED

CURT TRAILER HITCHES HITCH MOUNTS