safecom's proven patented synergy-2, dpsv4, power booster & dual t-former p.s turns...

1

Safecom's proven patented SYNERGY-2 , DPSV4, Power Booster & Dual T-former P.S turns existing CATV networks into a super power synergy platform that provide most reliable and economic powering system for unlimited backup time.

Safecom Smart Grid Patented technology providing complete set of unlimited backup Power for CATV networks & Without Batteries

DPS v4

Power Booster 4G

SYNERGY-2

Tel +972-544311933 / Fax +972-9-7968033 / Habustan st (PO 132) / Israel 40691/ E-mai l [email protected]

Dual T-former 2X 15A 60,66,72,87 V +

DOCSIS Monitoring

2

Based on the strategic placing of intelligent power management devices throughout the network, in the event of a power outage the SYNERGY-2 & DPS4 draws power from the distant available source over existing coax or power cables. Utilizing breakthrough direct AC/AC On-Line stabilize technology safecom's SYNERGY-2 and Power Booster ensures an optimal voltage level – even over long distances.

The Backup Power concept .


3 Tel +972-544311933 / Fax +972-9-7968033 / Habustan st (PO 132) / Israel 40691/ E-mai l [email protected]

Based on the strategic placing of intelligent power management devices throughout the network, in the event of a power outage the DPSv4 draws power from the nearest available source over existing coax or power cables.

Safecom's proven smart grid technologies greatly improve network powering reliability while creating significant savings on both capital and operational expenses.

1 2

3 4Power +

Signal

To remote / Node / Amplifier

Optical Node/Trunk

amp

P.S

2

1

3

4

AC 1 input .AC 2 input

Local output to local Optical Node.(AC+RF) Backup IN.OUT (AC+RF to remote Node/ amp)

DPS V4US PATENT 5747888 EP 0708559

4 Tel +972-544311933 / Fax +972-9-7968033 / Habustan st (PO 132) / Israel 40691/ E-mail [email protected]

MINIMIZE THE NUMBER OF POWER SUPPLIES IN THE NETWORK. INCREASING THE POWERING AREA COVERED BY POWER SUPPLY

Vin 30-87Vac (US)Vin 30-64Vac (EU)

tv

tv

Vout 87 Vac (US) Vout 60 Vac (EU)

US PATENT 8,415,822

POWER BOOSTER US PATENT 8,415,822

Utilizing patented breakthrough direct on-line zero crossing AC/AC stabilize technology safecom's ensures an optimal voltage level to Optical Nodes & Line Amplifiers even the source of power from over long distances. Passive , Standalone element , power booster solves the power distribution problem in a CATV network caused by high-resistance and low energy efficient coax & electricity cables.

5

Power Booster – the 4G Transmission New Power Booster 4G

Integrated Dual Power inserter. Stand alone unit.

RF PASS 1GHZ

Voltage gain 1: 1.56 enabling up to double powering distance.

coverage area

Zero crossing - Smooth transition between conversion levels.

Technology

4 Automatic gears AC/AC transformation

gears

100 mA (EU model) 200 mA (US model)

Self current load


6

• All in One two-way RF Pass 1GHZ passive device that “toggle” available power between two distant locations.• Redirecting power from the "normally" remote powered area to the area subject to power outage.• During the normal mode of operation, when there is no power outage at either end of the pair, the SYNERGY-2 act as power block to the other side. • Utilizing breakthrough step-up & stabilizing voltage technology the unit provides optimal & stable voltage level from local or remote P.S even from very long distance or using a un-stabilized P.S.


=DPS V 4

Power Booster

SYNERGY-2US PATENT 8,415,822

AC 1 input .AC 2 input Local output to local Optical Node.(AC+RF)

Backup IN.OUT (AC+RF to remote Node/ amp) 12

34

Power +

Signal

To remote / Node / Amplifier

Optical Node/Trunk

amp

P.S

21

3 4

+

7

Inputs/ Outputs configuration


Monitoring Inputs/outputs

ONLINE Current & Voltage +

status .

AC 2 - Input AC1 - Input

RF / AC 5-1000MHz 15A OUTPUT To Local Amplifier / Node

RF / AC 5-1000Mhz 15AINPUT / OUTPUTTo / From Remote Amplifier / Node

US PATENT 8,415,822

Vin 30-87V Vac (US)Vin 30-64V Vac (EU)

t

v

tv

Vout 87 Vac (US)Vout 60 Vac (EU)

• Inside view : SYNERGY-2 60/87V -2x15A

8

SYNERGY 2 the New generation.

Previous generations of DPS DPS Ver 4 SYNERGY-2

Limited by cable conductivity and Voltage drop.

External Power Booster required depend on voltage level when using remote powering.

Improved – Integrated power Booster (ALL in ONE). Remote backup powering

Required stabilizing P.S. (Ferro or T-former)

Required stabilizing P.S. (Ferro or T-former)

Improved .No required stabilizing P.S. Build in online zero crossing voltage stabilizer.

Stabilizing Voltage

External Dual power Inserter is needed Integrated Dual Power inserter. Integrated Dual Power inserter. Power Insertion

Required Two units. One unit. (+ optional Power Booster) One unit. Installation

--- Direct Monitoring outputs Via one Cable to IP transponders.

Direct Monitoring outputs Via one Cable to IP transponders. Monitoring



US PATENT 8,415,822Dual Port P.S + Docsis / EuroDOCSIS monitoring

NEW UR – Ultra Range +/- 25% Vin

Power Innovation

aa aaa

a


DOCSIS® & EuroDOCSIS Status Monitoring Embedded Transponder.

Direct RF connection to CATV network

Output 260,66,72 15A

Output 160,66,72 15A

External Monitoring DPS, SYNERGY-2 & more

Dual Port P.S model SC-D-TFPS-1800-E-O-M2 ports X 15A 60,66,72Vac 50/60 Hz .

Direct connection .

Direct connection .

Voltage testing points

Current loop testing points

(For Clamp meter )

11

SYNERGY-2 Typical configuration Optical node + Trunk amplifier(or second optical node) .

Power + Signal

From Optical node 4

21

3

1234


Local output to local Optical Node.(AC+RF)Backup IN.OUT (AC+RF to remote Node/ amp)

Power + Signal

Optical Node21

3 4To remote / amplifier / Node P.S

.S

P.S

60V

60V

Trunk amplifierOr Optical Node

60V60V

Area A

Area B



From Optical node

1234



Power + Signal

Optical Node21

3 4To remote / amplifier / Node P.S

.S

P.S

SYNERGY-2 – Demo backup power from Area A to Area B

Power + Signal Trunk amplifierOr Optical Node

60V55V50V

45V60V

Area A

Area B

21

43340V 60V

60V40V

13

Power + Signal

To Optical node4

21

3

1234



Power + Signal

21

3 4From remote amplifier / Node

P.S.S

P.S

Optical Node

45V50V

55V

60V 60VTrunk amplifierOr Optical Node

SYNERGY-2 – Demo backup power from Area B to Area A

P.S

Area A

Area B


40V 60V

40V 60V

14

SAFECOM’s powering system around the worldReliability since 1994


15

Power backup Comparisons

Synergy-2 / DPS V4

Generators Non Standby

Standby + Batteries

Power Type

Low High Low High Cost

Zero Permanent Negligible

Permanent Maintenance

Unlimited Limited by fuel

None 2 to 3 hour(Depends on

batt. condition )

Backup Power

Low cost Very expensive

Low Very Expensive

Redundant/ Diversity


16

Typical optical network powering examples


17

90V-network60V-available


18





HFC NetworkDPS4 power backup

20

Business case.

Improving customer service and satisfaction. Enabling MSO to add new services that required top high

reliability. Unlimited backup time. Reducing dramatically CAPEX & OPEX. Increasing powering efficacy & save energy.



Complete Tree-View Import using CSV file• Also can discover One node at a time from the UI (on –demand discovery )• Network discovery• Export the Tree-View for further Use

1. Discovery can be backed up2. Automated Full Topology DPS/ SYNERGY back up

Auto Discovery of the PS Monitor• Supports any device that has a SCTE-HMS-PS-MIB• Supports auto discovery of thresholds (SCTE-HMS-COMMON-MIB )• Auto Generates Attribute Widgets with properly formatted thresholds• Supports all Adjacent devices like APC, Cordex Controllers etc.• Supports Discrete Thresholds

DOCSIS® & EuroDOCSIS Status Monitoring

22

• Monitors the Attributes – Pre-Configured Poll Interval– Summarization ( Hourly , Daily )– Graphing ( Single or Multiple attributes )– Attribute Refresh ( on demand )

• Monitors the Current Alarm Table– Generates the Events from this table– Auto Correlation ( If the alarm is pre-existing, does not generate a new

Alarm)– Updates the Tree-view with corresponding Severity – If SNMP Traps are enabled, It will auto-correlate the incoming traps with

Current Alarm table


Google Maps Integration

24

ON-LINE REPORT


Europe 60V & US 90V Standard. Support full 15A rms input /output. Prefect voltage at the remote location in the network. Water-proof Enclosure.(IPX8)�� Opposite connection protected. Input & Output Surge Protection.�� DOCSIS® & EuroDOCSIS Status Monitoring. Online RF transmission during operation.

(INTERNET,VOD,VOIP)

Standard Features

Power Innovation

26

Summery SAFECOM SYNERGY-2 & DPSv4 offers CATV operators the most efficient and

reliable complete backup solution for unlimited time at minimum cost. No additional cost for MSO further to the fact that SYNERGY-2 / DPS v4 unit

can be reuse from HFC network to full optical network. Following the government regulation for full powering backup. SYNERGY-2 ,DPSv4 & Power Booster systems enabling additional backup from

remote powering. No maintenance. Unlimited life time. Two way powering on a single cable (Coax or electrical cable) Full DOCSIS® & EuroDOCSIS Status Monitoring


27

Thank you


safecom's proven patented synergy-2, dpsv4, power booster & dual t-former p.s turns...

Documents

power outage

source of power

available power

power cables

power signal

backup power concept

power booster us patent

power booster dual t