s1013 air compressor suction filter cleaning
TRANSCRIPT
Locate the air compressor suction filter
(Refer to user manual of the air compressor
as the filter location will be different for
different models)
REQUIRED TOOLS
PROCEDURE
AIR COMPRESSOR SUCTION FILTER CLEANING
Panel Key, Clean and dry compressed air
Remove the side cover of air compressor
Service Bulletin
S1013
Turn off power to air compressor before conducting any serviceADVISORY
Email: [email protected], Website: www.mvsengg.com
PROBLEM SOLUTION
Air delivery (volume of air) from the compressor is reduced
Air delivery pressure is fluctuating too much
Air compressor is heating up beyond normal range
If environment of air compressor area is dusty
Air compressor suction filter cleaning
may be required
Pull out the filter element from it's housing
Blow air only use the discharge side
Use jet of clean and dry compressed air
Continue blowing jet of air on side of filter also pointing downwards.
Unlock the clips of the filter housing
Identify the suction and discharge side of the filter. (Refer to video)
Put back the cleaned filter back in housing
Email: [email protected], Website: www.mvsengg.com
Reattach the housing and lock in position
https://youtu.be/1hNzkoW1iJ8
PLEASE WATCH THE VIDEO, LINK BELOW
Email: [email protected], Website: www.mvsengg.com