S0153 - CV Anonyme SKILL SHEET

P. 1/5

Customer Project :

Date of submission :

Update: 09/2017

Experience : 23 ans

CONCEPTOR SENIOR DESIGNER

DIPLOMAS

� 1994 D.U.T Techniques appliquées à l’industrie mention en micromécanique, informatique

industrielle, option CAO

TRAININGS

� 23/06/2008 – 27/06/2008 : TRAINING CATIA V5 Composite (35h) � 14/12/09-18/01/2010 : TRAINING ENGLISH Rédaction Courrier/Mail Lot 3 NOVITEC (14h) � 26/10/09-10/12/09 : TRAINING ENGLISH Lot 1 NOVITEC (28h) � 02/03/2010 : TRAINING E-learning PDMLink A350 � 03/2011: TRAINING VPM A350 Design in context.

EXPERIENCES

Depuis

09/2005

FERCHAU ENGINEERING

03/2017 - 07/2017 : X6 AIRBUS HELICOPTERES MARIGNAN E

� Preliminary studies ESI - fixed and mobile brackets. � Upper deck harness- wire routing. LH RH � Under fuselage harness- wire routing. LH RH � ESN harness- wire routing. � RACEWAY LH RH fixed support.

03/2016 - 03/2017 : AIRBUS NEW BELUGA MSI

� Preliminary studies 3D et Full 3D MSI. � FRONT – REAR LOWER DECK, BELLYDOOR environment � Lining, drainage, airduct.

01/2015 - 02/2016 : A330NEO ESI Mâts engine - FOKKE R ELMO

� Design of fixed and mobile brackets, and boxes of electrical junctions - maturity A, B and C.

S0153 - CV Anonyme SKILL SHEET

P. 2/5

05/2014 - 10/2014 : A330NEO - Pylon G.E and RR

� Preliminary studies (level 1) to ESI � Designs of electric harnesses and fixed and mobile bracket � Studies up to mat. A.

02/2013 - 12/2013 : A320NEO - Pylon CFM et P&W � Preliminary studies (level 1) to ESI � Update of the routings and creation of fixed and mobile brackets on Panel lat. and

spar � Preliminary studies (level 1) of the ramps for the installation of systems of

detections (fire) use of the SiO2 cables), safeguarding of areas � Standards and basic parts under NSPI � Creation of Routings Projects Plans for each update � Repositories STD electric.

01/2013 - 02/2013 : A350-900 – Pylon � Recovery ESI, � Fixed and mobile brackets � Design wiring harness.

12/2012 : A320NEO - LEAP’X � Design and definition of molded parts.

10/2011 - 11/2012 : Program A350 - FTI WP8 � Design and definition of brackets. � Creation and update of plans (2D) � Data integration PDM and VPM.

02/2010 - 09/2011 : A350 Airduct Cabin-Cargo � New design of tubing brackets, mat. B � Tubing design and air intake for ventilation and extraction air to the cargo of the

"Center Fuselage", � Integration of the data into PDM Link, � Request structure primary and secondary for adaptation of the news bindings, non-

standard, following the specifications of the customer (DIEHL-AIRCABIN), � Metallization of electrical and mechanical equipment, use of the SIDP and ESN

methodologies.

11/2008 - 01/2010 : A380 Pylon � Study bracket of equipment system, � Drawing of systems and structures, � Exchange DQN outdoor and indoor of equipment system. � Taken Integration in EPD CONNECT, � Generate BOM under GILDA.

11/2008 - 01/2010 : A400M Cockpit � Lead designer area, � Exchanges of the following different standards MSN,

S0153 - CV Anonyme SKILL SHEET

P. 3/5

� Implementation bundle equipment, � Taken DQN for M.I.P. and OVHP, � Integration Data in PRIMES, � Generate BOM under PRIMES.

09/2008 - 10/2008: LATECOERE Program A350 Nose Fuse lage � Studies and designs of front gear doors, mat. A � Input-output Simulation of the front gear doors, and search for the clash, � Proposals of multiple solutions for the front hatches Swan collars, � Implementation of solutions of different states I/O, � Participation in the development of the interface between the front gooseneck and

the closing mechanism, for insured environmental "fail-safe".

01/2007 - 08/2008 : AEROSUD, Program A400M Cockpit, STG � Drawings for metallic and composites parts for A400M � Data integration of BOM, and PRIMES.

04/2006 - 12/2006 : A400M, ATA 87 ESI � Harness picture drawings, � Data integration BOM, � Document to establish the methodology electric A400M, � Interface designers, manufacturing and assembly line.

11/2005 - 04/2006: Designer cockpit WP A400M, MIP, OHP

� Realization of documents of methodologies wads as AIRBUS.

09/2005 - 11/2005: CNES Toulouse, platform ELA3

� Conducting studies 3D tools interface Launcher in CATIAV5.

2000-2005 ALSPACE TECHNOLOGIES (31)

Designer on I-DEAS 3D, C3P, Pro Engineer, CATIA V5

� Different studies in solid and surfacic for space, automotive, and manufacturing space for:

MGI Coutier - CHAMPFROMIER Division Automotive (01)

� Developments of an airduct of power engine, from front to the engine, PEUGEOT, FORD, MAZDA.

MGI Coutier - Division Power MONTEUX (84) � Developments of environment injection engine fuel, � Developments of the pipes of tanks to engine, � Fixing pipes fuel engine environment.

S0153 - CV Anonyme SKILL SHEET

P. 4/5

MGI Coutier - Division SLEEVE NESLE (80)

� Developments of a hinge and station doors to small footprint for the doors.

MANN + HUMMEL Automotive France - Division plastic LAVAL (53)

� Developments in air supply systems and the environment of the top motor V6 HDI for PEUGEOT, JAGUAR, and FORD motor.

SIEMENS VDO Automotive TOULOUSE (31)

� Design of an aluminum shell for better dissipation of heat from an electronic box.

Spatial Sector

LAL_IN2P3 - Laboratoire de l’Accélérateur Linéaire ORSAY (92)

� Design of ASSEMBLY for a set of superconducting cavity for the TTF (Tesla Test Facility).

IAS - Institut d’Astrophysique et Spatiale ORSAY (9 2) � Development and prototyping of a support for a satellite optical equipment. � Assembly in white room, and landing simulation (vibratory system).

Industrial Sector

SEPRO ROBOTIQUE - La Roche-sur-Yon � Participation in the developments of a new series of Robotics, build to equip the

press of injection up to 1000 tons. � Digitization and drawing. � Control Assembly and test.

1997 - 2000 SERMAN S.A Orthez (64)

Designer CAO/DAO-Pro-Engineer � Pharmaceuticals, food product conveyor systems: � Drawing part and assembly, � Interface between the Engineering Office and workshop. � Delivery and installation at the customers.

1989 - 1993 MECANUMERIQUE France Albi (81)

Designer CAO/DAO-Pro-Engineer

� Serigraphic cutting system: � Design and drawing of mechanical parts and assemble � Interface between the Engineering Office and workshop. � Delivery and installation at the customers.

S0153 - CV Anonyme SKILL SHEET

P. 5/5

TECHNICAL SKILLS

FIELDS OF COMPETENCES BEGINNER OPERATIONAL CONFIRMED EXPERT

CAO, mechanical

CATIA V5 X

CATIA V5 EHI/EHA X

CATIA V5 Sheet Metal Design X

CATIA V5 Full 3D

Bureautics

MS-Office X

Data managements

VPM/PRIMES A350/PDM LINK X

LANGUAGES SCHOLAR PROFESSIONAL FLUENT

ENGLISH X