s /sdl led installation and assembly instructions...s/sdl led installation and assembly instructions...

5
S /SDL LED INSTALLATION AND ASSEMBLY INSTRUCTIONS IMPORTANT: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD VOID ALL WARRANTIES! WARNING! RISK OF FIRE OR ELECTRICAL SHOCK OR PRODUCT DAMAGE Disconnect power before installing or servicing. Do not electrically connect live wiring! WARNING: Risk of fire or electric shock. Do not alter, relocate, or remove wiring, power supply or any other electrical component. WARNING: Risk of fire or electric shock. Installation of this luminaire requires a person familiar with the construction and operation of the luminaire's electrical system and the hazards involved. If not qualified do not attempt installation. Contact a qualified electrician. -Verify that supply wiring voltage matches power supply voltage by comparing it with power supply label. -Make all electrical and and grounded connections in accordance with the National Electric Code (NEC) and any other applicable local code requirements. CAUTION: RISK OF INJURY. - Wear gloves and safety glasses at all times when removing luminaire from carton, installing , servicing or performing maintenance. -Never connect components under load. -Do NOT mount or support these fixtures in a manner that can cut the outer jacket or damage wire insulation. -Do NOT restrict fixture ventilation. Allow for some volume of airspace around fixture. Avoid covering LED fixtures with insulation, foam, or other material that will prevent convection of conduction cooling. -Always read the fixtures complete installation instructions prior to installation for any additional fixture specific warnings.

Upload: others

Post on 08-Feb-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

  • S /SDL LED INSTALLATION AND ASSEMBLY INSTRUCTIONS

    IMPORTANT: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD VOID ALL WARRANTIES!

    WARNING! RISK OF FIRE OR ELECTRICAL SHOCK OR PRODUCT DAMAGE

    Disconnect power before installing or servicing. Do not electrically connect live wiring!

    WARNING: Risk of fire or electric shock. Do not alter, relocate, or remove wiring, power supply or any other

    electrical component.

    WARNING: Risk of fire or electric shock. Installation of this luminaire requires a person familiar with the

    construction and operation of the luminaire's electrical system and the hazards involved. If not qualified do not

    attempt installation. Contact a qualified electrician.

    -Verify that supply wiring voltage matches power supply voltage by comparing it with power supply label.

    -Make all electrical and and grounded connections in accordance with the National Electric Code (NEC) and

    any other applicable local code requirements.

    CAUTION: RISK OF INJURY.

    - Wear gloves and safety glasses at all times when removing luminaire from carton, installing , servicing or

    performing maintenance.

    -Never connect components under load.

    -Do NOT mount or support these fixtures in a manner that can cut the outer jacket or damage wire insulation.

    -Do NOT restrict fixture ventilation. Allow for some volume of airspace around fixture. Avoid covering LED

    fixtures with insulation, foam, or other material that will prevent convection of conduction cooling.

    -Always read the fixtures complete installation instructions prior to installation for any additional fixture

    specific warnings.

    AutoCAD SHX TextPAGE (1

  • S/SDL LED INSTALLATION AND ASSEMBLY INSTRUCTIONS

    AutoCAD SHX Text1.) UNPACK STRIP.

    AutoCAD SHX Text8). ROW MOUNTING OPTION: HOUSING END CAN BE ROTATED 90 DEGREES TO BE USED AS JOINER AS SHOWN BELOW.

    AutoCAD SHX TextPAGE (2

    AutoCAD SHX TextPACKAGE INCLUDES SCREWS. X4 FOR 2 & 4FT UNITS. X8 FOR 8FT UNITS

    AutoCAD SHX Text2.) TO INSTALL FIXTURE COVER NEEDS TO BE REMOVED BY COMPRESSING HOUSING SIDES TO FREE TABS ON HOUSING FROM SLOTS ON COVER. (REMOVAL OF LENS NOT REQUIRED FOR INSTALL.)

    AutoCAD SHX Text3.) SURFACE MOUNT SURFACE MOUNT SCREWS (BY OTHERS) USED TO ATTACH FIXTURE.

    AutoCAD SHX Text4.) PENDANT MOUNT PENDANT MOUNT USE 7/8 (.875") KNOCK OUTS IN HOUSING.

    AutoCAD SHX Text5.) GRID HANGER MOUNTING. GRID HANGER MOUNTING. SECURE LSI GRID HANGERS TO T-GRID. CAPTURE HOUSING USING GRID HANGERS.

    AutoCAD SHX Text6.) CHAIN MOUNTING.CHAIN MOUNTING.

    AutoCAD SHX Text7). T-GRID COLLAR OPTION: ATTACHED J-BOX TO T-GRID AND FASTEN WIRE COLLAR TO J-BOX TO SECURE TO GRID SYSTEM. HOLD FIXTURE UP TO COLLAR AND BEND TABS TO HOLD IN PLACE. MAKE WIRE CONNECTIONS.

    AutoCAD SHX Text*LENS REMOVAL NOT REQUIRED FOR INSTALL. LENS REMOVAL INSTRUCTIONS FOR TROUBLESHOOTING PURPOSES PAGE 4*

  • FROM

    BUILDING

    SUPPLY

    TO

    FIXTURE

    HOT

    GROUND

    NEUTRAL

    BLACK

    WHITE

    GREEN

    WIRENUT

    (SPLICES MADE

    IN FIELD)

    S/SDL LED INSTALLATION AND ASSEMBLY INSTRUCTIONSMOUNTING ACCESSORIES

    S/SDL GRID HANGER BRACKET LSI# 648480

    S/SDL GRID MTG FEED COLLAR LSI# 555914

    S/SDL CHAIN MTG KIT.LSI# M38258 36"& 251057 60".

    S/SDL WIRE GUARD

    S/SDL LED INSTALLATION AND ASSEMBLY INSTRUCTIONS

    AutoCAD SHX TextNOTE: SEE DRIVER FOR CURRENT AND VOLTAGE.

    AutoCAD SHX TextPAGE (3

    AutoCAD SHX Text10.) REPLACE COVER AND REATTACH BY ALIGNING HOUSING TABS WITH SLOTS ON COVER. FIXTURE IS INSTALLED AND CAN BE ENERGIZED.

    AutoCAD SHX Text9.) TYP WIRING.TYP WIRING.

    AutoCAD SHX Text11.) DISENGAGE LED PANEL FROM HOUSING. ATTACH CLIPS TO PANEL. SECURE WIRE GUARD TO CLIPS. REATTACH LED PANEL TO HOUSING.

    AutoCAD SHX TextOPTIONAL:SECURE COVER TO HOUSING WITH SCREWS PACKAGED WITH FIXTURE. :SECURE COVER TO HOUSING WITH SCREWS PACKAGED WITH FIXTURE.

  • AutoCAD SHX TextPAGE (4

    AutoCAD SHX TextSDL HOUSING MOUNTING DETAILS:

    AutoCAD SHX TextBOTTOM VIEW

    AutoCAD SHX TextSIDE VIEW

    AutoCAD SHX TextSDL PEDANT & CANOPY DETAIL

  • AutoCAD SHX TextPAGE (5

    AutoCAD SHX TextSDL LENS REMOVAL: LENS REMOVAL NOT REQUIRED FOR INSTALL! IF LENS REMOVAL IS REQUIRED FOR TROUBLESHOOTING PURPOSE SQUEEZE LENS ON SIDES TO UNCLIP FROM COVER.

    Sheets and Views682744-PG1682744-PG2682744-PG3682744-PG4682744-PG5