rz indu 12s eng.fh11 19.01.2011 10:55 uhr seite 2...
TRANSCRIPT
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 2
KOMA
KOMA refrigeration techniques
BlizzardIBF RackCommander SpiroStar
TurboRunnerBlizzard
Spiral systemsRackCommander
TurboRunner
®
Conservation systems
PaterNoster
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 3
Introduction
2
The world nowadays is online – andso are we. Let all facility be monitored.Installations can be monitored withfaults being reported to themonitoring-department and processedimmediately. 24 hours a day, 365days a year. Further information canbe found on the following pages.
Our industrial systems providesolutions for continuous blast freezing,even in three-shift operation, justaccording to your demands. Linearbelt freezing system, spiral freezer,shocking system for racks, optionallywith automated transportationsystem, blast freezing of productsplaced on trays – you will find ourproduct range on the following pages.
If there are questions and shouldyou require further information, pleasecontact a member of our sales teamas detailed on the back of thisbrochure. Please contact our indoorservice team under (+31) (0)475-474700. Of course, the responsiblesales representative for your regionis also available for an appointmenton-site. We will be happy to provideyou with the contact.
KOMA refrigeration technique – weare committed to our name. Powerfulrefrigeration technique, theappropriate room climate for everyproduct, state-of-the-art air flowsystems according to the KOMA-TLR-Formula, variable sizes, componentsof leading manufacturers as well asthe fact, that every system iscustomized, planned, projected andinstalled are basis for supply of bestpossible quality.
Our optimal control and regulationof the fundamental conditionstemperature, air and relative airhumidity ensures well-balancedcooling and dough conditioningclimates. This is the constant aim ofour in-house design team.Refrigeration technique according tothe high demands of the STEK-standard., controls and top-qualityinsulation panels are all manufacturedin our own production facilities. Wealso keep to these principles whenit comes to service, assembly andinstallation.
KOMA employs its own field servicestaff who use KOMA approved spares.
Modern
production
plants for high-
performance
blast freezing
systems
ALL COMPONENTSFROM ONE SOURCE
POWERFUL REFRIGERATION TECHNIQUE
Blast freezing / Chillingwith ceiling evaporator
Page 3
· Industrial Blast Freezer (IBF)· IVS with ceiling evaporator· Industrial Blast Chiller (IBC)
Blast freezing / Chillingwith stand evaporator
Page 4
· Blizzard/KTT· Mistral
Transportation system(KRC) Page 5· Automated rack transport system(RackCommander)
Linear belt freezingsystem Page 6-7· KOMA TurboRunner (KTR)
Blast freezing ofproducts on trays
Page 8
· KOMA PaterNoster (KPN)
Spiral system Page 9· KOMA SpiroStar (KSP)
KOMA refrigeratingsystems Page 10· Compressors· Condensers· Wiring (installation)
Controls, TeleGuard,KRASS Page 11
CONTENTS
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 4
IBF – INDUSTRIAL BLAST FREEZER
Blast freezing
3
Massive architecture, maximumcooling capacity, innovative evaporatorconstructions and intelligent air flow– these are the requirements towardsa capable and powerful blast freezer.
All these characteristics are combinedin an impressive manner in the KOMAIndustrial Blast Freezer “IBF”. Largehourly outputs of up to 600 kg/hourare no problem. The ceilingevaporators custom made for KOMAwith the tilted fan motors are space-saving and allow for trouble-freeintegration to existing productionsystems.
If required, the system can also beinstalled as a blast freezer. Optionalalso with Sensor Control System formeasurement of the core temperature,as well as optical and acousticsignalling device.
Optional also as Chiller for the chillingof oven-hot products such as bakedbread or warm meals (Catering,canteen/large kitchens).
The inside and outside of the chambersare made of stainless steel, thebottom is formed to a stainless steeltub, on demand with an integrateddrain system – so even in terms ofhygiene there are no compromises.
Optional with KOMA „RackCommander“,the automated rack transport system(see page page 5).
IBF (Industrial Blast Freezer) –
Blast freezing tunnel with
licensed custom made KOMA
ceiling evaporators
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 5
Blizzard Blast freezing system
4
BLIZZARD –MAXIMUM REFRIGERATION CAPACITY
Mistral-Chilling-System for
canteen/large kitchens and
catering
Blast freezing tunnel with
stand evaporators
Massive architecture, maximumcooling capacity, innovative evaporatorconstructions and intelligent air flow– these are the characteristics of thepowerful blast freezer BLIZZARD. Allthese characteristics are combinedin an impressive manner in the KOMA
“Blizzard”. Large hourly outputs ofup to 1.000 kg//hour are within theregular performance range. Due tothe stand evaporator with extremelylarge surfaces and large fin interspacesthe capacity also allows for largequantities of oven-hot products.
On demand also with Sensor ControlSystem for measurement of the coretemperature, as well as optical andacoustic signalling device.
Optional also available as acompressor for the chilling of oven-hot products such as baked breador warm meals (Catering,canteen/large kitchens) in the KOMA„Mistral“ BlastChiller version.
The inside and outside of the chamberare made of stainless steel, thebottom is formed to a stainless steeltub, on demand with an integrateddrain system – so even in terms ofhygiene there are no compromises.
Optional with KOMA-„RackCommander“, the automated racktransport system (see page 5).
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 6
The KOMA „RackCommander“provides optimisation and automation.
It allows for computer-controlledautomation of the completeproduction process. Production cyclesthat include fermentation, bracingand blast freezing can be automatedvia the rack transport system. Definedprocessing steps eliminate fluctuationsand help to improve the quality ofyour final product.
Ground-clear assembly (hygiene!),rack transport via jackscrew-tension-system, state-of-the-art sensortechnology and computer controlsguarantee a trouble-free productionprocess, so there is no need formoving the racks by hand anymore.The integration of automatic slidingdoors is also trouble-free and eventhe backhaul of the racks can beincluded to the automatic cycle.
KOMA “RACK COMMANDER”
Production line consisting of:
Conditioning/Fermentation – Bracing – Blast
Freezing – Packing with integrated rack
transport system
KOMA Post Curing Room with connection to the
automated rack transport system
“RackCommander”
Automated rack
transportation system
“RackCommander”,
two-rowed with
automatic sliding
doors
Rack transport system
5
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 7
TURBO RUNNER – BELT FREEZING The TurboRunner is a linear beltfreezing system for continuousproduction processes. TheTurboRunner is designed for largehourly outputs of 2.000 kg/hour ormore. The system may be integratedinto automated production lines viamodern transportation technique.
Despite the size and the massiveconstruction of the KOMA„TurboRunner“ it adapts very flexiblyto changes in capacity or productionstructure. The modular design of 3m sections allows for extension ofthe system by one or more sections.Thus, even rearrangements inproduction may be performed withoutcomplete disassembly. The pre-mounted, modular design of theTurboRunner ensures a relatively cost-effective and quick installation onsite. So no particular recesses in thefactory bottom are necessary.
The linearly led belt is ideal for verysensitive products, that could bedamaged in form and structure bythe bend-lead of the belt in aconventional spiral system.
The construction of the thirdgeneration TurboRunner isconsequently based on the hygienic
TurboRunner 3rd generation
KOMA TurboRunner
6
TurboRunner slim version for ice cream
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 8
G SYSTEM
KOMA-production
for TurboRunner
KOMA TurboRunner
7
concept. The belt is led freely over the ground,so the belt as well as the bottom are freelyaccessible for cleaning purposes. The bottom ofthe cabinet is tilted downwards at the edges,so that condensate and cleaning water as wellas seepage can flow out to sides of the door.
Evaporator tubs, fan motors as well as thecondensate tub can be tilted downwards withjust a few snatches. An automated belt cleaningsystem ensure easy cleaning during the defrostingphase. Optional also available with a specialcleaning- and sterilizing system.
Compared to systems using cryogenic gases, theTurboRunner ensures very low average productioncosts by the use of „conventional cold“ (incl.service-, energy- and depreciation costs), asshown in the exemplary calculation.
Evaporator with hinged fan
motors
Hygiene station
Freely led stainless
steel transportation
belt
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 9
KPN – KOMA PaterNoster
8
The KOMA PaterNoster– state-of-the-art transportation technique andpowerful refrigeration technique allowfor high hourly outputs of productsplaced on trays and run through theproduction process on theses trays.
The modular structure of the systemallows for the insertion of four traysat a time. After entrance, the transportascends vertically upwards. At the topfollows a horizontal transport to thesecond section, and afterwards, thetrays are transported verticallydownwards and forwarded to the exit.The powerful evaporators are optimally
arranged with their blow-out-area tocover the vertical transportation areaof the trays.
Just like all of our insulation rooms,our cabinets for our spiral freezersare manufactured in our own panelplant. The insulation is made of highpressure, CFC-free polyurethane-hard-foam of sandwich construction andincorporating a conical locking
mechanism to ensure highinsulation values.
modern, half-hermeticreciprocating compressor, amplydesigned evaporators andcondenser surfaces only. Therefrigeration cycle meets the highdemands of the STEK Norm in
order to ensure a highdegree of safety andenvironmentalcompatibility.
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 10
KSP – KOMA SpiroStar
9
The KOMA spiral freezer – state-of-the-art transport technique andpowerful refrigeration technique allowfor large hourly outputs at continuous,automated production.
Optionally, the belt is delivered instainless steel or plastic version andit is equipped with an automatedbelt cleaning system, in order to meetthe hygienic requirements (HACCP).
Just like all of our insulation rooms,our cabinets for our spiral freezersare manufactured in our own panelplant. The insulation is made of highpressure, CFC-free polyurethane-hard-foam of sandwich construction andincorporating a conical lockingmechanism to ensure high insulationvalues.
KOMA uses modern, half-hermeticreciprocating compressor, amplydesigned evaporators and condensersurfaces only. The refrigeration cyclemeets the high demands of the STEKNorm in order to ensure a high degreeof safety and environmentalcompatibility.
KOMA spiral freezers are designedfor blast freezing, chilling, freezing,cooling and conditioning/fermentationand can be integrated into anyautomated production process.
Please feel free to ask us forreferences.
Delivery belt for spiral freezer
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 11
Compressors, condensers, assembly (wiring)
10
CompressorsThe refrigeration cycles installed byKOMA are based on the strict STEKNorm. Amongst other this implies thefollowing:
All KOMA devices are speciallymounted on carriages and arecompletely pre-wired. During assemblyonly the fixation of the control cables
NRE – noise reduction enclosure
on the terminal block of the machineswitch cabinet is to be carried out.
Additionally, all devices are equippedwith high-/ low pressure-, as well asoil pressure-sensors. The versions ofthe KOMA compressors with separatecondenser are equipped with acompressor fan in order to ensure aheat dissipation for the device.
KOMA uses capillary high pressurehoses, no copper capillary as theseare vulnerable leakage. Further, oil-and liquid strainer are installed.Crucial components for the safety,longevity and ease of maintenanceof your KOMA compressors!
The liquid tank for large refrigerationdevices is always chosen large enoughaccording to STEK-Norm, so that itcan always hold the complete loadof refrigerant of the cooling cycle .So we do not use a compressor „off-the-shelf“ but adjust it to the specific
conditions (length of lead, size ofthe condenser etc.).
CondensersKOMA attaches great importance toan ample dimensioning of thecondenser surface, so that theperformance of your KOMA systemis ensured even at summerytemperatures!
Only when compressor, evaporatorsurface (within the compressor) andthe condenser surface are optimallyharmonized, you will experience theperformance required.
That is why you should not onlycompare the HP-indications of thecompressors (that actually indicatethe drive power of the electric motoronly), but the effective refrigerationcapacity measured in KW atcomparable condensation- andevaporation temperatures.
KOMA Assembly standardKOMA does not use material „off-the-shelf“. High-grade copper tubesare laid and we are put a high efforton minimizing the amount of solderjoints!
An outdoor set up is also easilypossible for compressors withstainless steel weather protectionenclosures. KOMA manufactures theseunits optionally.
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 12
Note:
Subject to technical modifications and alterations. Illustrationsand charts serve for visualization/illustration purposes andmay change in practice. Status 7/2009.
MonoCell ATUnits: Blast freezers, KTT, IBF
· Guaranteed quality monitoring andlogical programming.
· Quick cooling time and duration are freely programmable.
· Air amounts and speeds may be adjusted in 1%-steps and thus anideal adaptation to your quality demands is ensured.
· Direct intervention at failures.
· Permanent monitoring of all entered data.
· Automatic backup of all programmedata due to supplementary batterysupply in case of failures, power breakdowns etc.
· TeleGuard remote monitoring
TeleGuard / KRASS
11
TeleGuardSecurity online for your KOMA units.
All of the KOMA units can be remotelymonitored via the TeleGuard system.All of the controls in use with KOMAunits are compatible with TeleGuardso that we can guarantee youmaximum security.
Failures are immediately reported toour monitoring department at ourservice headquarters.
The staff is able to establish a directconnection to your refrigeration unitin order to take a real time look atall relevant data or even for editingpurposes. Thus, temperatures andpressures (high pressure, lowpressure, oil pressure) may bechecked, icing up of the evaporatorcan be detected – and, even an opendoor is recognized and KOMAimmediately informs the customer.Further, our staff is always glad toassist you in adjusting your unit´sprogramming.
KRASS - SoftwareOur software provides variouspossibilities for the recording andevaluation of the temperature curves.Whether it chart or table illustration,temperature recording that meets thelegal requirements (HACCP –obligation of documentation andstorage). It also allows for control ofthe system via a central PC, whichmay be located at your Home Officeor any other location.
The software is easy to install on anystandard PC, but we will definitelyassist you with that also.
Just contact us.
®
Conservation systems
-
RZ_Indu_12s_ENG.fh11 19.01.2011 10:55 Uhr Seite 1
®
Conservation systems
KOMA Koeltechnische Industrie B.V.
Energieweg 2 · NL-6045 JE Roermond · Tel.: +31 (0) 475 47 47 00 · Fax: +31 (0) 475 32 54 49E-Mail: [email protected] · www.koma.com
KOMA subsidiaries in: Belgium, Germany, France, Great Britain, Italy, Spain, U.A.E. (Dubai) and Japan