ruber impact protection systems impact protection systems
TRANSCRIPT
Rubber Impact Protection Systems
Description
Wabo® Gards
Wabo® D Gard
Wabo® CLM Col Gard
Wabo® CLM Col Gard
Wabo® K Gard
Wabo® S Speed Gard
Wabo® W Wall Gard
Physical Properties of Rubber
2
3
4
5
6
7
8
9
10
Content
Rubber protective systems shall be made of high impact resistance rubber to a number of different size and colour configurations. The system comprises of elements which will control the speed of travel of vehicles, thus protecting people, the structure surface, and other vehicles in the park. It also incorporates other elements which are purely for impact resistance, in order to avoid or minimize the potential damage to a structural component such as a column, a wall or a loading dock area, when impacted.
FeaturesThe system has an aesthetic finish with concealed fixings, is easy to install, maintenance free, and has excellent resistance to UV and weathering.
Some of these elements are listed below
Wall Gard for the protection of walls & circular columns.
Speed Gard supplied in modules, works on the control of vehicular speeds in the car park.
Wheel Stopper is utilized for protection of kerbs, edges and structural elements.
Column Gard is specifically designed for the protection of square and rectangular columns.
Bumper Gard to withstand the impact and load of the loading & unloading vehicles.
Description
2
WABO® Gard
Material Components
Extruded rubber profiles made from durable rubber, whichis resilient, impact resistant, non-marking on contact.
Impact resistant
Reduces damage to building components
Reduces damage to vehicles
Aesthetic finish with concealed fixings
Easy to install
Maintenance free
External and internal use
Excellent resistance weathering & UV
Typical Applications
Car parks
Loading bays
Warehouse
Industrial units
Hospitals
Cold stores
Manufacturing
3
WABO® D Gard
Features
Rubber Loading Bay Bumpers are heavy duty extruded or moulded profiles to withstand the impact and load of the loading and unloading vehicles. Bumpers protect the wall from damages and cracks. The impact level of these bumpers are very high. Bumpers are made of good quality, high density compounds to withstand resistance, deflection on impact and heavy impact.
Size
Rubber Bumpers can be manufactured to clients specification or as per cross section and quality details given below. Some of the standard sizes are:
Cross-section details:
TYPE D1 D2 D3 P1
W (Width) 75 150 200 150
H (Height) 45 150 200 75
Installation
All bumpers are installed by expansion bolts. The size of the bolts will depend on the section of the bumpers. Bumpers will be supplied with pre drilled holes.Standard bolts size: 1/2” dia x 6” or 4” long expansion bolts.
Expansion Bolts
Countersunk Hole
4
WABO® CLM Col Gard
DescriptionThe WABO® CLM Col Gard is designed to protect the edges of columns in structures.
MaterialsThe WABO® CLM Col Gard is made of a high impact resistance extruded rubber profile. Standard colour is black. Yellow reflective cover strips are available on request.
Range of sizesThe gard is available with or without galvanised metal insert clips with various dimensions.
Standard lengthsThe standard lengths of the WABO® CLM Col Gard are 1 meter and 1.2 meters. Other sizes can be provided upon request
5
InstallationPlace clip on the wall at a distance of 100 or 150 mm from the finished floor level and mark the hole positions on the wall.
Drill holes in the wall by using suitable drill bits.
Fasten the clip to the wall using M6/M8 screws and plastic plug.
Slide the rubber gard from the sides.
Clean the Corner gard using dry cloth to clear dust.
Alternatively they can be fixed to the column surface using the BASF epoxy resin Concresive 2200.
Col Gard - With Yellow Strips
A B
Col Gard - Plain
A B
CLM: with clips
AD: without clips adhesive type
A B
CLM 65 65 65
CLM 90 90 90
CLM 120 120 120
CLM AD 100 100 100
Wing lengths
6
WABO® K GardDescription
The WABO® K Gard is specifically built to be used as a wheel stopper
Materials
Wheels stoppers are made of high impact resistence extruded rubber and have excellent weather resistances crack resistance and abrasion resistence quality.
Sizes: Wheel stoppers are available in the following sizes:
Standard Length: The standard length of a wheel stopper is 2 meters.
Installation
Mark Straight line at a distance of 800 mm from the concrete/ block wall.Remove the yellow coloured reflective strip from the Rubber Wheel Stoppers.Lay the Wheel Stopper straight on the line.Mark the locations on the floor.Drill holes to suit M12 Expansion bolts.Fasten the Wheel Stoppers with the bolts.Insert back the yellow coloured reflective strip into the Rubber Wheel Stopper.
Base Width Height
137.5mm 100mm
150mm 150mm
7
WABO® S Speed GardDescription
The WABO® S Speed Gard is designed to control the speed of the vehicles.
Features
The standard gard units are 400mm wide x 68mm high at the centre tapering to 0 heights at the ends.Length of a standard unit is 250mm.One meter length of the WABO® S Speed Gard will comprise of 4 units alternating in black and yellow colours.Two end piece units in black colour are provided for each length of the gard.Reflective eyes are provided on both the approach sides of the speed gards.
Other Sizes available:
Installation
Mark Straight line on the location where the Speed Humps are to be installed.
Place the Speed Humps straight on the line marked.
Locate the hole and mark the same in the floor.
Drill holes into the floor by using suitable drill bits.
Fasten the Speed Humps by using M10/M12 expansion bolts.
Base Width Height
400mm 50mm
400mm 65mm
8
WABO® W Wall Gard Description
The WABO® W Wall Gard is designed to protect walls and round section columns.
Materials
The WABO® W Wall Gard is made of a high impact resistance rubber profile and can be fixed horizontally or vertically onto flat or curved surfaces. Standard colour is black.
Standard lengths
The WABO® W Wall Gard can be supplied as per customer specification and could be manufactured to a maximum length of 4 meters.
Installation
Fixing holes are drilled with a centre to centre spacing of max. 600mm. The gard may be secured to the substrate by means of an expansion or chemical anchor.
Dimensions W H
W GARD - 25 200mm x 25mm 200 25
W GARD - 30 200mm x 30mm 200 30
W GARD - 50 200mm x 50mm 200 50
H
W
9
Physical Properties of RubberProperty Reference Standard Acceptance Criteria
Hardness BS 903 A57/ASTM D2240 68 - 73 Shore “A”
Specific Gravity BS 903 A1 1.48 - 1.51
Tensile Strength BS 903 A2/ASTM D412 120 kg/cm2 (min.)
Elongation at break BS 903 A2/ASTM D412 400% (min.)
Tear Strength BS 903 A3/ASTM D412 40N/mm (min.)
Compression set BS 903 A6/ASTM D395 20% (max.)
(24 hrs/70ºC)
Ozone resistance BS 903 A43/ASTM D1149 No cracks (24 hrs/23ºC, 50 pphm)
BASF Construction Chemicals UAE LLC Introduces Protection Systems for buildings comprising
WABO® D GardWABO® CLM Col GardWABO® K GardWABO® S Speed GardWABO® W Wall Gard
10