rubber & plastic matting & floorings - price list 2009...
TRANSCRIPT
Product Range covered in this issue:- • Fine Ribbed [ Corrugated type]
• Flat Ribbed [ Castellated type]
• Flat Ribbed [ Broad flute type]
• Checker Plate
• Orange Peel
• Diamond & Pyramid
• Rope Affect
• Hammered Pattern
• Round & Square stud
• Scraper types
• Rhombus anti slip
• PVC Gripflute, Lattice & Membrane
• Plain finish types
Issue 09/001MRun
RUBBER & PLASTIC MATTING & FLOORINGS - Price List 2009 Issue 1 Runner Matting's in roll format Giving you the competitive edge
Page 2
Table of Contents
Runner Matting’s • Page 3 - CORU500 & CORU505 Fine Ribbed [corrugated] types • Page 4 - CORU520 Flat Fluted [castellated] type • Page 5 - CORU540 Flat Broad Ribbed Type • Page 6 - CORU542 Flat Medium Ribbed Type • Page 7 - CORU545 Checker Plate Pattern Types • Page 8 - CORU737 PVC Checker Plate Pattern Type • Page 9—CORU546 Orange Peel Pattern • Page 10 - CORU596 Diamond Plate Pattern • Page 11 - CORU597 Pyramid Plate Pattern • Page 12 - CORU598 Rope Effect Pattern • Page 13 - CORU577 Heavy Duty Diamond Matting • Page 14 - CORU664 & CORU665 Hammered [Magnamat] Pattern • Page 15 - CORU599 Circular Stud Pattern - rubber • Page 16 - CORU666 Square Stud PVC Pattern - PVC • Page 17 - CORU561 & CORU563 PVC Round Stud & Pebble Matting • Page 18 - CORU560 & CORU562 PVC Ribbed & Pyramid Matting • Page 19 - CORU348 & CORU349 Scraper Patterns - rubber • Page 20 - CORU591 ‘RHOMBUS’ Pattern • Page 21 - CORU667 Grip-Flute Pattern PVC • Page 22 - CORU667GL Grip Etched PVC Membrane Liner • Page 23—CORU668 Lattice Open Grid PVC Pattern • Page 24 - CORU531 Open Grid PVC Matting • Page 25 - CORU110 & CORU595 Plain Finish Rubber Mattings • Page 26 - Back Page Address & contact details
The prices stated herein are applicable for full length rolls or mats only and are subject to the fol-lowing conditions:- Discount structure:- Minimum Order Value: £50.00 - £499.00 net Order Value: £500.00/749.00 - Less 5% Order Value: £750.00/999.00 - Less 7.5% Order Value: £1000.00/1500 - Less 10% For order value exceeding £1500.00 or repeating, scheduled orders please refer to our sales office. A SMALL PERCENTAGE OF ROLLS SUPPLIED MAY BE IN TWO PIECES Cut Lengths: Where applicable cut lengths can be offered subject to a 20% surcharge or to a minimum value of £10.00 Carriage Terms:- Carriage is paid on all consignments exceeding £350.00 net value. For consignments below this amount a charge of between £12.50/£30.00 would be levied dependent on consignment size, weight and volume. The above terms are based on our standard two to three day carrier service and is applicable for England, Wales and Scottish borders. Details on application for other areas. Surcharges will apply for to consignments requested to be sent on next day or special couriers. We regret that items sent from our other branches may not be included in the above terms. The materials and styles stated herein represent our standard stock range of runner matting's. We have extensive knowledge in this field and would welcome an opportunity to quote you for any special or custom made product you require. Many of the items listed could be produced in other formats for thickness, size, colour and compound so please do not hesitate to ask for details. Other matting and flooring brochures available:- • Electrical Safety • Anti-Fatigue • Entrance and Doorway • Equine, Animal & Agricultural • Sports, Leisure & Gym • Catering Please ask for copies
Page 3 Fine Ribbed Rubber Runner Matting
Style 500 & 505 Fine Ribbed Rubber Runner Matting
FEATURES: • Economically priced • Hard - wearing & durable rubber • Slip resistant directional ribbed surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties • Extensive colour range available to special order
Options:
• 0.9m x 10m x 3mm • 1.0m x 10m x 3mm • 1.2m x 10m x 3mm • 1.0m x 10m x 4.5mm • 1.2m x 10m x 4.5mm • 1.0m x 10m x 6.0mm • 1.2m x 10m x 6.0mm Other thickness’s & roll sizes to special order
STOCK ROLL SIZES:
Colours To special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Style Information and Data Probably the most commonly requested and best known runner matting specified by our customers. Due to the nature and economy of manufacture minor surface deformations and blemishes may occur and material may be more odorous than normal. We offer this style in two grades, CORU500 economy and CORU505 premium, both types are manufactured to the following general specifications:- Polymer Type: SBR Hardness: 65/75º Density - SG: 1.5 Tensile Strength: 2.5 Mpa Elongation at break: 130% Abrasion Resistance: 300 mm³ Temperature Resistance: -20/+70ºC Both grades can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Code Roll Size Price/M2 Price/Roll
500 10m x 0.91m x 3.0mm £4.58 £41.68
500 10m x 1.00m x 3.0mm £4.58 £45.80
500 10m x 1.20m x 3.0mm £4.58 £54.96
500 10m x 1.00m x 4.5mm £9.39 £93.90
500 10m x 1.20m x 4.5mm £9.39 £112.68
500 10m x 1.00m x 6.0mm £11.43 £114.30
500 10m x 1.20m x 6.0mm £11.43 £137.16
CORU505 Premium Grade
505 10m x 0.91m x 3.0mm £5.13 £46.63
505 10m x 1.00m x 3.0mm £5.13 £51.30
505 10m x 1.20m x 3.0mm £5.13 £61.56
505 10m x 1.20m x 3.0mm Grey & Green
£9.66 £115.92
505 10m x 1.00m x 4.5mm £10.73 £107.30
505 10m x 1.20m x 4.5mm £10.73 128.76
505 10m x 1.00m x 6.0mm £14.63 £146.30
505 10m x 1.20m x 6.0mm £14.63 £175.56
Other Colours-to special order
500 10m x 1.2m x 10.0mm £17.97 £215.64
CORU500 Economy Grade
Price List
Page 4 Flat Ribbed Rubber Runner Matting
Style 520 Flat [Castellated] fluted Rubber Runner Matting
FEATURES: Options:
STOCK ROLL SIZES:
Colours To special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to Clients tests for suitability.
Style Information and Data A very popular and attractive runner matting. CORU520 is available from stock in three width and thickness formats and is made to the following general specifications:- Polymer Type: NR/SBR Hardness: 60/70º Density - SG: 1.4 Tensile Strength: 3.0 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours [RAL matched if needed] to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Code Roll Size Price/M2 Price/Roll
520 10m x 1.0m x 3.0mm £6.36 £63.60
520 10m x 1.2m x 3.0mm £6.36 £76.32
520 10m x 1.0m x 4.5mm £11.31 £113.10
520 10m x 1.2m x 4.5mm £11.31 £135.72
520 10m x 1.0m x 6.0mm £13.43 £134.30
520 10m x 1.2m x 6.0mm £13.43 £161.16
Price List
• 1.0m x 10m x 3mm • 1.2m x 10m x 3mm • 1.0m x 10m x 4.5mm • 1.2m x 10m x 4.5mm • 1.0m x 10m x 6.0mm • 1.2m x 10m x 6.0mm Black only—other colours to special order
• Smart attractive pattern • Hard - wearing & durable rubber • Slip resistant directional ribbed surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties • Extensive colour range available to special order
Page 5 Flat Ribbed Rubber Runner Matting
Style 540 Flat [Broad Ribbed] Fluted Runner Matting - Black
FEATURES:
STOCK ROLL SIZES:
Options: Other Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
• Smart, attractive pattern • Heavy Duty, Hard - wearing & durable rubber • Clean, sheen finish • Slip resistant directional ribbed surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties • Extensive colour range available to special order
• 1.2m x 10m x 3mm Economy • 1.2m x 10m x 5mm Economy • 1.2m x 10m x 6mm Economy • 1 & 1.2m x 10m x 4mm Premium • 1 & 1.2m x 10m x 5mm Premium • 1 & 1.2m x 10m x 6mm Premium • 1.2m x 10m x 8.0mm Premium • 1.2m x 10m x 9.5mm Premium • 1.8m x 10m x 6mm 1 ply fabric • 1.8m x 10m x 10mm 1 ply fabric
Style Information and Data A heavy duty and durable rubber runner matting. Widely used in the animal, equine and livestock industries offering a tough and hardwearing floor covering and protection layer for enclosures, pens and transporters. CORU540 is available from stock in a vari-ety of differing formats and is made to the following general specifications:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 3.0 MPa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temerature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour.
Code Roll Size Price/M2 Price/Roll
Economy Grade [Shallow]
540E 10m x 1.2m x 3.0mm £6.18 £74.16
540E 10m x 1.2m x 5.0mm £9.24 £110.88
540E 10m x 1.2m x 6.0mm £11.39 £136.68
Premium Grade [Deep]
540 10m x 1.0m x 4.0mm £8.96 £89.60
540 10m x 1.2m x 4.0mm £8.96 £107.52
540 10m x 1.0m x 5.0mm £11.10 £111.00
540 10m x 1.2m x 5.0mm £11.10 £133.20
540 10m x 1.0m x 6.0mm £13.29 £132.90
540 10m x 1.2m x 6.0mm £13.29 £159.48
540 10m x 1.2m x 8.0mm £17.10 £205.20
540 10m x 1.2m x 9.5mm £20.67 £248.04
1 Ply Fabric Reinforced
540P 10m x 1.8m x 6.0mm £18.12 £326.16
540P 10m x 1.8m x 10.0mm £26.15 £470.70
540C 10m x 1.2m x 5.0mm colours Grey, Blue, Green & Brown
£22.98 £275.76
Price List
Page 6 Flat Ribbed Rubber Runner Matting
Style 542 Flat [Medium Ribbed] Fluted Runner Matting
FEATURES:
STOCK ROLL SIZES:
Options: Other Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
• Smart, attractive pattern • Hard - wearing & durable rubber • Medium width fluted finish • Slip resistant directional ribbed surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties • Extensive colour range available to special order
• 1.2m x 10m x 3mm in • Black, Blue, Green & Red • 1.2m x 10m x 4.5mm Black • 1.2m x 10m x 6.0mm Black
Style Information and Data An attractive and durable rubber runner mat with a medium width flat [castellated] fluted anti-slip directional finish. CORU542 is available from stock in a variety of differing formats and is made to the following general specifications:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 3.0 Mpa Elongation at break: 200% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours [RAL match if required] to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Code Roll Size Price/M2 Price/Roll
Black
542 10m x 1.2m x 3.0mm £6.09 £73.08
542 10m x 1.2m x 4.5mm £8.88 £106.56
542 10m x 1.2m x 6.0mm £11.01 £132.12
Colours
542 10m x 1.2m x 3.0mm Blue £9.05 £108.60
542 10m x 1.2m x 3.0mm Green £9.05 £108.60
542 10m x 1.3m x 3.0mm Red £9.05 £108.60
Price List
Page 7 Patterned Rubber Runner Matting
Style 545 ‘Checker Plate’ Runner Matting - Single & Five Bar Types
FEATURES: • Smart & Attractive pattern • Hard - wearing & durable rubber • Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
Options:
Single Bar Type • 1.2m x 10m x 3.0mm Black • 1.2m x 10m x 3.0mm Grey • 1.2m x 10m x 4.5mm Black • 1.2m x 10m x 4.5mm Grey Five Bar Type • 1.2m x 10m x 3.0mm in Black, Grey, Blue & Green • 1.2m x 10m x 4.5mm in Black and Grey
STOCK ROLL SIZES:
Colours To special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Not recommended
Style Information and Data An attractive and durable rubber runner matting. Widely used anti-slip floor cover-ings in a multitude of environments. CORU545 is available from stock in a variety of differing type and colour formats and is made to the following general specifications:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 3.0 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Code Roll Size Price/M2 Price/Roll
Single Bar
545-1 10m x 1.2m x 3.0mm Black £9.41 £112.92
545-1 10m x 1.2m x 3.0mm Grey £11.28 £135.36
545-1 10m x 1.2m x 4.5mm Black £14.97 £179.64
545-1 10m x 1.2m x 4.5mm Grey £18.72 £224.64
Five Bar
545-5 10m x 1.2m x 3.0mm Black £9.41 £112.92
545-5 10m x 1.2m x 3.0mm Grey £11.28 £135.36
545-5 10m x 1.0m x 3.0mm Blue £13.32 £133.20
545-5 10m x 1.2m x 3.0mm Green £13.32 £158.40
545-5 10m x 1.2m x 4.5mm Black £14.97 £179.64
545-5 10m x 1.2m x 4.5mm Grey £18.72 £224.64
Price List
Page 8 Patterned PVC Runner Matting
Style 737 ’Checker Plate’ PVC Runner Matting
FEATURES: Options:
• 0.6m x 22.8m x 4mm Black & Grey • 0.91m x 22.8m x 4mm Black & Grey • 0.91m x 22.8m x 4mm Black with Yellow safety warning edges • 1.22m x 22.8m x 4mm Black & Grey
STOCK ROLL SIZES:
• Attractive Checker/Diamond Embossed Pattern • High Oil, Grease & Chemical resistance • Excellent slip resistant characteristics • Suitable for wet & dry areas • High insulation properties
Style Information and Data An attractive, hardwearing and durable PVC runner matting. Widely used for anti-slip floor coverings in a multitude of environments. CORU737 is available from stock in a variety of differing type and colour formats and is made to the following general specifications:- Polymer Type: PVC Hardness: 75º Density - SG: 1.7 Tensile Strength: 8.0 Mpa Elongation at break: 200% Abrasion Resistance: 150 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour. Other details upon request.
Colours To special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Not recommended
Price List Code Roll Size Price/M2 Price/Roll
Black
737 22.8m x 0.60m x 3.5mm £16.05 £219.56
737 22.8m x 0.91m x 3.5mm £16.05 £333.01
737 22.8m x 1.22m x 3.5mm £16.05 £446.45
Black with Yellow Edges
737 22.8m x 0.91m x 3.5mm £19.98 £414.55
Grey
737 22.8m x 0.60m x 3.5mm £16.47 £225.31
737 22.8m x 0.91m x 3.5mm £16.47 £341.72
737 22.8m x 1.22m x 3.5mm £16.47 £458.13
Page 9 Patterned Rubber Runner Matting
Style 546 ‘Orange Peel’ Runner Matting - Black
FEATURES: Options: • Hard - wearing & durable rubber • Unique ‘Crazed’ bark patterned finish • Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
• 1.25m x 15m x 3.0mm • 1.25m x 15m x 4.5mm • 1.25m x 15m x 6.0mm Black only
STOCK ROLL SIZES:
Colours To special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Not recommended
Style Information and Data A unique pattern matting which has good non-slip and anti-slip characteristics. CORU546 is available from stock in a variety of differing type and colour formats and is made to the following general specifications:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 2.5 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying length and thickness formats to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
546 10m x 1.25m x 3.0mm £6.38 £79.75
546 15m x 1.25m x 3.0mm £6.38 £119.63
546 10m x 1.25m x 4.5mm £9.27 £115.88
546 15m x 1.25m x 4.5mm £9.27 £173.81
546 10m x 1.25m x 6.0mm £12.60 £157.50
546 15m x 1.25m x 6.0mm £12.60 £236.25
Page 10 Patterned Rubber Runner Matting
Style 596 ‘Diamond Plate’ Runner Matting - Black
FEATURES: • Neat, smart & attractive pattern • Hard - wearing & durable rubber • Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
Options:
• 1.2m x 10.0m x 3.0mm • 1.2m x 10.0m x 4.5mm Black only - colours to special order
STOCK ROLL SIZES:
Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Style Information and Data A very popular runner matting with a crisp, smart and attractive low relief multi-directional design produced from high quality and durable rubber. CORU596 is available from stock in two thickness formats and is made to the following general specifications:- Polymer Type: NR/SBR Hardness: 60/70º Density - SG: 1.4 Tensile Strength: 3.0 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours [RAL matched if needed] to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
596 10m x 1.2m x 3.0mm £7.98 £95.76
596 10m x 1.2m x 4.5mm £13.07 £156.84
Page 11 Patterned Rubber Runner Matting
Style 597 ’Pyramid Plate’ Runner Matting - Black
FEATURES: • Neat, smart & attractive pattern • Hard - wearing & durable rubber • Unique patterned finish • High Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
STOCK ROLL SIZES: • 1.0m x 10.0m x 3.0mm • 1.0m x 10.0m x 4.0mm • 1.0m x 10.0m x 6.0mm • 1.2m x 10.0m x 3.0mm • 1.2m x 10.0m x 4.0mm • 1.2m x 10.0m x 6.0mm Black only - colours to special order
Options: Colours To Special Order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Style Information and Data A very popular runner matting with a crisp, smart and attractive high relief multi-directional design produced from high quality and durable rubber. CORU597 is available from stock in three thickness and two width formats and is made to the following general specifica-tions:- Polymer Type: NR/SBR Hardness: 60/70º Density - SG: 1.4 Tensile Strength: 3.0 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours [RAL matched if needed] to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Code Roll Size Price/M2 Price/Roll
597 10m x 1.0m x 3.0mm £8.27 £82.70
597 10m x 1.2m x 3.0mm £8.27 £99.24
597 10m x 1.0m x 4.0mm £11.49 £114.90
597 10m x 1.2m x 4.0mm £11.49 £137.88
597 10m x 1.0m x 6.0mm £17.82 £178.20
597 10m x 1.2m x 6.0mm £17.82 £213.84
Price List
Page 12 Patterned Rubber Runner Matting
Style 598 ’Rope Affect’ Rubber Runner Matting - Black
FEATURES: • Neat, smart & Attractive pattern • Hard - wearing & durable rubber • High Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
Options:
• 1.2m x 10.0m x 3.0mm Black only
STOCK ROLL SIZES:
Colours No Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Style Information and Data A unique pattern matting which has good non-slip and anti-slip characteristics. CORU598 is only available from stock in one format and is made to the following general specifications:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 2.5 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying length and thickness formats to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
598 10m x 1.2m x 3.0mm £6.93 £83.16
Page 13 Patterned Rubber Runner Matting
Style 577 Heavy Duty Diamond Rubber Runner Matting - Black
FEATURES: • Neat, smart & Attractive pattern • Hard - wearing & durable rubber • Slip resistant Diamond Rhombus patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
Options:
• 1.2m x 10.0m x 12.0mm Black only
STOCK ROLL SIZES:
Colours No Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Style Information and Data A deep impression diamond pattern matting which is heavy duty and has good non-slip characteristics. CORU577 is only available from stock in one format and is made to the following general specifications:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 2.5 Mpa Elongation at break: 150% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying length and thickness formats to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
577 10m x 1.2m x 12.0mm £25.65 £307.80
Page 14 Patterned Rubber Runner Matting
Style 664 ’Hammered Truck Bed Mats - Black Style 665 ‘Hammered’ Rubber Matting - Black
FEATURES:
• Heavy Duty • Extra wide widths available • Hard - wearing & durable rubber • Unique patterned finish • Slip resistant multi-directional patterned surface • Fluted reverse for good drainage & Insulation • Good floor to foot cold insulation properties
STOCK ROLL SIZES: Style 664 Hammered Truck Bed Mats • 1.83m x 1.22m x 6.0mm • 2.44m x 1.22m x 6.0mm • 2.44m x 1.52m x 6.0mm Style 665 Hammered Roll Matting • 1.2m x 10m x 10.0mm • 1.8m x 10m x 10.0mm • 2.0m x 11m x 10.0mm • 1.8m x 10m x 12.0mm • 2.0m x 11m x 15.0mm
Options:
Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples [CORU665 version only] Cut Shapes Yes Adhesive Backing Not recommended
Style Information and Data A smart, attractive and very heavy duty, hard wearing and durable rubber matting. Used extensively on vehicle floors, animal transporters, animal enclosures and many varied industrial areas. CORU664 is available from stock in three pre cut size formats and CORU665 in varying thickness and roll sizes which are made to the following general specifica-tions:- Polymer Type: SBR/NR Hardness: 66/75º Density - SG: 1.5 Tensile Strength: 3.5 Mpa Elongation at break: 300% Abrasion Resistance: 200 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying length and thickness formats to special order. These would be subject to minimum batch run quantities, usually 300 M2 per size/colour. Other details upon request.
Code Roll Size Price Price/Roll
CORU664 - Pre Cut Per Mat
664 1.83m x 1.22m x 6.0mm £29.97 £66.91
664 2.44m x 1.22m x 6.0mm £41.10 £41.97
664 2.44m x 1.52m x 6.0mm £51.21 £189.93
CORU665 - In rolls Per M2
665 10m x 1.2m x 10.0mm £21.23 £254.76
665 10m x 1.8m x 10.0mm £21.23 £382.14
665 11m x 2.0m x 10.0mm £21.23 £467.06
665 10m x 1.8m x 12.0mm £26.45 £476.10
665 11m x 2.0m x 15.0mm £31.53 £693.66
Price List
Page 15 Studded Patterned Rubber Runner
Style 599 Circular Stud Runner Matting - Black & Colours
FEATURES: • Neat, smart & Attractive pattern • Hard - wearing & durable rubber • High Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties • Also available in scuff resistant matt finish
Options:
Economy Grade • 1.2m x 10m x 3mm Black & Grey • 1.2m x 10m x 4mm Black & Grey Premium Grade • 1.2m x 10m x 3mm in Black, Grey, Blue & Green • 1.2m x 10m x 4mm in Black & Grey
STOCK ROLL SIZES:
Other Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Style Information and Data A very popular and attractive runner matting with round circular stud pattern design with anti-creep back pattern. CORU599 is available from stock in two grades, economy [matt finish] and premium [sheen finish] and is made to the following general specifications:- Polymer Type: NR/SBR Hardness: 70º Density - SG: 1.4 Tensile Strength: 4.0 Mpa Elongation at break: 150% Abrasion Resistance: 200 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours [RAL matched if needed] to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Code Roll Size Price Price/Roll
CORU599-Econony
599E 10m x 1.2m x 3.0mm Black £7.16 £85.92
599E 10m x 1.2m x 3.0mm Grey £10.55 £126.60
599E 10m x 1.2m x 4.0mm Black £9.51 £114.12
599E 10m x 1.2m x 4.0mm Grey £14.07 £168.84
CORU599 - Premium
599P 10m x 1.2m x 3.0mm Black £11.25 £135.00
599P 10m x 1.2m x 3.0mm Grey £12.53 £150.36
599P 10m x 1.2m x 3.0mm Blue £13.02 £156.24
599P 10m x 1.2m x 3.0mm Green £13.02 £156.24
599P 10m x 1.2m x 4.0mm Black £14.18 £170.16
599P 10m x 1.2m x 4.0mm Grey £16.32 £195.84
Price List
Page 16 Studded Patterned PVC Runner Matting
Style 666 Square Studded PVC Runner Matting - Black & Colours
FEATURES: • Attractive low relief square studded pattern • Clean & Hygienic • Durable PVC compound • Slip resistant multi-directional patterned surface • Good floor to foot cold insulation properties • Economically priced
STOCK ROLL SIZES: • 1.1m x 10m x 2.4mm Black • 1.1m x 10m x 2.4mm Grey • 1.1m x 10m x 2.4mm Blue • 1.1m x 10m x 2.4mm Green • 1.1m x 10m x 2.4mm Red
Options: Other Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Not recommended
Style Information and Data An attractive, hardwearing and durable PVC runner matting. Widely used for anti-slip floor coverings in a multitude of environments. CORU666 is available from stock in five differing colour formats and is made to the following general specifications:- Polymer Type: PVC Hardness: 75º Density - SG: 1.8 Tensile Strength: 3.0 Mpa Elongation at break: 200% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour. Other details upon request.
Code Roll Size Price/M2 Price/Roll
666 10m x 1.1m x 2.4mm Black £9.26 £101.86
666 10m x 1.1m x 2.4mm Grey £10.05 £110.55
666 10m x 1.1m x 2.4mm Blue £10.05 £110.55
666 10m x 1.1m x 2.4mm Green £10.05 £110.55
666 10m x 1.1m x 2.4mm Red £10.05 £110.55
Price List
Page 17 Patterned PVC Runner Mattings
Style 561 Circular Stud & Style 563 Pebble Runner Mattings - Black & Colours
FEATURES:
• Neat, smart & Attractive patterns • Hard - wearing & durable • High Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties • Safe & Hygienic & Non Toxic
Options:
Styles 561 & 563 Roll Size: 10m x 1.2m Thickness: 2.5mm Colours:- Black, Blue, Green, Grey and Red
STOCK ROLLS:
Other Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Code Roll Size Price Price/Roll
CORU561 Stud
561 10m x 1.2m x 2.5mm Black £13.95 £167.40
561 10m x 1.2m x 2.5mm Blue £13.95 £167.40
561 10m x 1.2m x 2.5mm Green £13.95 £167.40
561 10m x 1.2m x 2.5mm Grey £13.95 £167.40
561 10m x 1.2m x 2.5mm Red £13.95 £167.40
CORU563 Pebble
563 10m x 1.2m x 2.5mm Black £13.95 £167.40
563 10m x 1.2m x 2.5mm Blue £13.95 £167.40
563 10m x 1.2m x 2.5mm Green £13.95 £167.40
563 10m x 1.2m x 2.5mm Grey £13.95 £167.40
563 10m x 1.2m x 2.5mm Red £13.95 £167.40
Price List Style Information and Data Attractive, hardwearing and durable PVC runner mattings. Widely used for anti-slip floor coverings in a multitude of environments. CORU561 & 563 are available from stock in two patterns and five differing colour formats and is made to the following general specifications:- Polymer Type: PVC Hardness: 75º Density - SG: 1.8 Tensile Strength: 3.0 Mpa Elongation at break: 200% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Page 18 Patterned PVC Runner Mattings
Style 560 Ribbed & Style 562 Pyramid Runner Mattings - Black & Colours
FEATURES:
• Neat, smart & Attractive patterns • Hard - wearing & durable • High Slip resistant multi-directional patterned surface • Impression finish anti-creep reverse • Good floor to foot cold insulation properties
Options:
Styles 561 & 563 Roll Size: 10m x 1.2m Thickness: 2.5mm Colours:- Style 560 Black, Blue, Green, Grey and Red Style 562 Black and Blue
STOCK ROLLS:
Other Colours To Special order Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients tests for suitability
Code Roll Size Price Price/Roll
CORU560 Ribbed
560 10m x 1.2m x 2.5mm Black £13.95 £167.40
560 10m x 1.2m x 2.5mm Blue £13.95 £167.40
560 10m x 1.2m x 2.5mm Green £13.95 £167.40
560 10m x 1.2m x 2.5mm Grey £13.95 £167.40
560 10m x 1.2m x 2.5mm Red
CORU562 Pyramid
562 10m x 1.2m x 2.5mm Black £13.95 £167.40
562 10m x 1.2m x 2.5mm Blue £13.95
£167.40
Price List Style Information and Data Attractive, hardwearing and durable PVC runner mattings. Widely used for anti-slip floor coverings in a multitude of environments. CORU560 & 562 are available from stock in two pattern styles and differing colour for-mats as stated and is made to the following general specifications:- Polymer Type: PVC Hardness: 75º Density - SG: 1.8 Tensile Strength: 3.0 Mpa Elongation at break: 200% Abrasion Resistance: 250 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Page 19 Patterned Rubber Runner Matting
Style 348 & 349 Ribbed Scraper Runner Matting - Black
FEATURES: • Suitable for indoor & outdoor applications • Very Hard - wearing & durable rubber • CORU348 - Unique ‘V’ pattern across width of rolls • CORU349 - Unique ‘V’ pattern chequered across roll
width • Slip resistant cross direction scraper patterned surface • Knobble pattern anti-creep reverse
Options:
• 0.91m x 18.3m x 6.4mm • 1.22m x 18.3m x 6.4mm Black only
STOCK ROLLSIZES:
Colours No Other sizes To Special order Cut lengths Yes in 1m multiples Cut Shapes Yes Adhesive Backing No
Style Information and Data High quality synthetic rubber runner matting in two distinct pattern formats giving high anti slip characteristics. The unique patterns facilitates scraping of dirty feet and retention of debris. The above mats are ideal for heavy traffic entrance areas. CORU348 & 349 is available from stock in two patterns, which can be reversed for extended life use and is made to the follow-ing general specifications:- Polymer Type: CR/SBR Hardness: 70º Density - SG: 1.3 Tensile Strength: 8.0 Mpa Elongation at break: 300% Abrasion Resistance: 150 mm³ Temperature Resistance: -20/+100ºC Other details upon request.
Code Roll Size Price Price/Roll
CORU348 Cross Ribbed
348 18.3m x 0.91m x 6.4mm £38.10 £634.48
348 18.3m x 1.22m x 6.4mm £38.10 £850.62
CORU348 Vari-Ribbed
349 18.3m x 0.91m x 6.4mm £38.10 £634.48
349 18.3m x 1.22m x 6.4mm £38.10 £850.62
Price List
Page 20 Runner Matting’s
Style 591 ’Rhombus’ Rubber Matting
FEATURES: • Premium grade Rubber Matting • Unique, Safe non slip Rhombus Patten surface • Excellent anti slip characteristics for applications involving excessive amounts of water & liquids • Ideal for steep, inclined areas • Attractive range of colours
Options:
• 1.0m x 10m x 3.5mm Black • 1.0m x 10m x 3.5mm Blue • 1.0m x 10m x 3.5mm Grey • 1.0m x 10m x 3.5mm Fawn • 1.0m x 10m x 3.5mm White Many other colours to special order
STOCK ROLL SIZES:
Colours To Special order Other sizes To Special order Cut lengths Yes Cut Shapes Yes Adhesive Backing Not recommended
Style Information and Data A unique pattern and concept to Coruba, our Rhombus type matting has excellent grip and non slip characteristics CORU591 is available from stock in two grades, SBR/NR economy and EPDM/SBR weather resistant and is made to the following general specifications:- Polymer Types: SBR/NR EPDM/SBR Hardness: 70º Density - SG: 1.4 Tensile Strength: 4.0 Mpa Elongation at break: 150% Abrasion Resistance: 200 mm³ Temperature Resistance: -20/+70ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours [RAL matched if needed] to special order. These would be subject to minimum batch run quantities, usually 100 M2 per size/colour. Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
591 10m x 1m x 3.5mm Black £12.90 £129.00
591 10m x 1m x 3.5mm Grey £16.35 £163.50
591 10m x 1m x 3.5mm Blue £17.06 £170.60
591 10m x 1m x 3.5mm Fawn £17.06 £170.60
591 10m x 1m x 3.5mm White £17.06 £170.60
EPDM Blend Grade
591E 10m x 1m x 3.5mm Black £21.77 £217.70
591E 10m x 1m x 3.5mm Grey £25.47 £254.70
Page 21 Runner Matting’s
Style 667 ‘Grip-Flute’ PVC Reversible Runner Matting
FEATURES:
STOCK ROLL SIZES: • 1.2m x 10m x 4.0mm Black • 1.2m x 10m x 4.0mm Blue • 1.2m x 10m x 4.0mm Green • 1.2m x 10m x 4.0mm Red • 1.2m x 10m x 4.0mm Grey
Options: Colours To Special order Other sizes To Special order Cut lengths Yes Cut Shapes Yes Adhesive Backing No
• Premium grade PVC Matting • Safe non slip Etched Diamond Patten surface on side • Flat castellated flat fluted reverse side • Excellent chemical, oil & Grease resistance • Fully reversible - can be used either face • Attractive range of colours
Style Information and Data An attractive, hardwearing and durable PVC runner matting. Widely used for anti-slip floor coverings in a multitude of environments and is reversible for extended like usage. CORU667 is available from stock in a variety of differing colour formats and is made to the following general specifica-tions:- Polymer Type: PVC Hardness: 75º Density - SG: 1.7 Tensile Strength: 8.0 Mpa Elongation at break: 200% Abrasion Resistance: 150 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour. Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
667 10m x 1.2m x 4.0mm Black £8.70 £104.40
667 10m x 1.2m x 4.0mm Grey £9.30 £111.60
667 10m x 1.2m x 4.0mm Blue £9.30 £111.60
667 10m x 1.2m x 4.0mm Green £9.30 £111.60
667 10m x 1.2m x 4.0mm Red £9.30 £111.60
Page 22 Runner Matting’s
Style 667GL Grip Liner PVC Membrane Matting
FEATURES: Options:
• 1.2m x 15m x 1.5mm Black • 1.2m x 15m x 1.5mm Grey • 1.2m x 15m x 1.5mm Green Many other colours to special order
STOCK ROLL SIZES:
Colours To Special order Other sizes To Special order Cut lengths Yes Cut Shapes Yes Adhesive Backing Not Recommended
• Premium grade PVC Matting • Safe non slip Etched Diamond Patten surface on side • Plain smooth backing • Excellent chemical, oil & Grease resistance • Clean, Hygienic, Tough & durable • Attractive range of colours
Style Information and Data An attractive, hardwearing and durable PVC runner lining membrane matting. Widely used for anti slip lining on drawers, trays, benches and table tops. CORU667GL is available from stock in three colour formats and is made to the following general specifications:- Polymer Type: PVC Hardness: 75º Density - SG: 1.7 Tensile Strength: 8.0 Mpa Elongation at break: 200% Abrasion Resistance: 150 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour. Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
667G 15m x 1.2m x 1.5mm Black £6.62 £119.16
667G 15m x 1.2m x 1.5mm Grey £7.13 £128.34
667G 15m x 1.2m x 1.5mm Green £7.13 £128.34
Page 23 Runner Matting’s
Style 668 ‘Lattice’ Open Grid PVC Runner Matting
FEATURES:
STOCK ROLL SIZES: • 1.2m x 15m x 4.0mm Blue • 1.2m x 15m x 4.0mm Green • 1.2m x 15m x 4.0mm Red • 1.2m x 15m x 4.0mm Grey Many other colours to special order
Options:
Colours To Special order Other sizes To Special order Cut lengths Yes Cut Shapes Yes Adhesive Backing No
• Premium grade PVC Matting • Unique ‘open grid’ pattern • Excellent drainage properties • Excellent chemical, oil & Grease resistance • Fully reversible - can be used either face • Tough and durable construction • Attractive range of colours
Style Information and Data An attractive, hardwearing and durable PVC runner matting. Ideal in areas of excessive water / liquid spillage. Lattice pattern enables quick drainage of fluids and dust particles. CORU668 is available from stock in a variety of differing colour formats and is made to the following general specifica-tions:- Polymer Type: PVC Hardness: 75º Density - SG: 1.7 Tensile Strength: 8.0 Mpa Elongation at break: 200% Abrasion Resistance: 150 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour. Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
668 15m x 1.2m x 4.0mm Grey £11.10 £249.75
668 15m x 1.2m x 4.0mm Blue £11.10 £249.75
668 15m x 1.2m x 4.0mm Green £11.10 £249.75
668 15m x 1.2m x 4.0mm Red £11.10 £249.75
Page 24 Runner Matting’s
Style 531 HD Open Grid PVC Runner Matting
FEATURES:
STOCK ROLL SIZES: • 10m x 1m x 12mm Blue • 10m x 1m x 12mm Red
Options:
Colours To Special order Other sizes To Special order Cut lengths Yes Cut Shapes Yes Adhesive Backing No
• Premium grade PVC Matting • Heavy Duty ‘open grid’ pattern • Excellent drainage properties • Excellent chemical, oil & Grease resistance • Tough and durable construction • Other colours made to special order
Style Information and Data An attractive, hardwearing and durable PVC runner matting. Ideal in areas of excessive water / liquid spillage. Lattice pattern enables quick drainage of fluids and dust particles. CORU531 is available from stock in two colour formats and is made to the following general specifications:- Polymer Type: PVC Hardness: 75º Density - SG: 1.7 Tensile Strength: 8.0 Mpa Elongation at break: 200% Abrasion Resistance: 150 mm³ Temperature Resistance: -20/+100ºC This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour. Other details upon request.
Price List Code Roll Size Price/M2 Price/Roll
531 10m x 1m x 12mm Blue £37.29 £372.90
531 10m x 1m x 12mm Red £37.29 £372.90
Page 25 Plain Rubber Runner Matting’s
Style 110 & 595 Plain Rubber Runner Matting
FEATURES: • For general purpose & specialised applications • Smooth or impression surfaces • Ideal for bench tops and draw / tray linings • Component and operator hand protection • Noise reducing • Economically priced
Options:
General purpose and speciality grades available in a variety of thickness’s, sizes, compounds and colours for a variety of applications. Grades available for general purpose, oil and fuel resistance, heat&flame retardant, acid and chemical resistant, abrasion and tear resistant and materials suitable for use with food and drink stuffs. Please ask for details.
STOCK ROLL SIZES:
Colours To Special order Other sizes To Special order Cut lengths Yes - 1m multiples Cut Shapes Yes Adhesive Backing Yes - subject to clients test for suitability
Style Information and Data We offer an extensive range of plain rubber and plastic type sheerings from stock for varies degrees of resistance and applications. CORU110 and CORU595 are basic general purpose grades. CORU119 is a solid material and CORU595 is a regenerated rubber ‘crumb’ product. Over 50 grades are available from our stock range in various compounds, colours and thickness’s. Please ask for our sheeting’s brochure for full details and data. Other details upon request.
Price List - General Purpose types - Black Code Roll Size Price Price/Roll
CORU110 General Purpose
119 10m x 1.4m x 3.0mm £5.16 £72.24
119 10m x 1.4m x 6.0mm £11.42 £159.88
119 5m x 1.4m x 10.0mm £18.57 £129.99
119 5m x 1.4m x 15.0mm £27.86 £195.02
CORU595 - Rubber Crumb
595 10m x 1.25m x 3.0mm £6.63 £82.88
595 10m x 1.25m x 4.5mm £11.10 £138.75
595 10m x 1.25m x 6.0mm £12.78 £159.75
595 10m x 1.25m x 10.0mm £21.23 £265.38
595 10m x 1.25m x 15.0mm £29.19 £364.88
595 10m x 1.25m x 20.0mm £33.81 £422.63
119 5m x 1.4m x 20.0mm £37.16 £260.12
119 5m x 1.4m x 25.0mm £46.44 £325.08
595 10m x 1.25m x 12.0mm £27.26 £227.13
The above are given as examples. Many other thicknesses are available Details on application
Head office & Factory: Units 28 & 30 Purdeys Way Purdeys Industrial Estate Rochford ESSEX UK SS4 1ND Telephone: 0044 [0] 845 130 1375 Fax: 0044 [0] 845 130 8375 Email: [email protected] Web: www.coruba.co.uk
Coruba is a division of Accrasystem Limited UK Registration No: 2127351 UK VAT Number: 506 1111 07