Product Description900mm long x 100mm wide, our rubber corner guard protectors contrasting in black and yellow offer high visibility and protection to wall and column corners. They are constructed from high impact resistance natural rubber which relieves the tension of chipped & broken corners of pillars / columns. They are suitable for medium & heavy traffic areas & also moving trolleys.

Rubber Corner Guard Protectors

Suitable ApplicationsCar parks, hospitals, nursing homes, laboratories, hotel, schools, sports areas.

Product Characteristics

Code Length Width Thickness Weight

Technical Data

FGEP-128L 900mm 100mm 20mm 2.5kg

• High density rubber.

• Impact protection.

• Reflective.

• Can be used internally or externally.• Helps to prevent accidental damage from forklifts.

Installation

They fit to any corner section to suit individual requirements. The wall must be clean and dry. If necessary, remove all traces of grease and oil from wall surfaces using a good cleaning solvent.

There are 6 bolt holes for easy installation. Two at the top, middle and bottom.

Screw Type Installation Instructions

1. Place corner guard on wall at desired location and mark with a pencil at each mounting hole.

2.Remove the guard and drill screw holes at each mark.

3.Wipe down the wall to remove any dust and plaster.

4.Replace the guard and attach to the wall with the supplied screws.

5.After the corner guard is installed, remove protective PVC covering.