Slide 1

1-2-3 Guide Configuration OptiX RTN By T2000 & U2000 Web LCTDirect by:Elhamy EldeebBSS Senior Engineer

Contents:IDU Structure for RTN 950.Create an NE by using the search method.Modifying the NE ID/Name.Add the boards.Create the IF 1+0 Board and configuration . Create the ODU Board .Create the SL1D Board . Create the EM6F Board & the Ethernet serves.Create the Cross-Connections .

IDU Structure for RTN 950

1-IF & SL1D & SP3S Or SP3D & EM6 Board configuration it from Slot1 to Slot6 3

Create an NE by using the search method.

1-click NE search and than click search2- the NE is found click to Add NE 4Modifying the NE ID/Name

1-click to NE Login and NE Explorar.2-click to NE in function tree and than configuration and NE Attribute.3-cliclk to modify NE ID and tana insert the NEW ID and click OK the NE ID will by change . 5Add the boards

1- click to the NE and than slot layout.2-click with the right click to the slot you want to add and chose the board type.

6Create the IF 1+0 board and configuration .

234

1-click to the IF.2-click to the configuration in the function tree and than click to the hybrid/AM configuration and the Manually specified modulator. 7Create the IF board.

123

1-click to the IF and than configuration in the function tree and the IF interface. 8

Create the ODU Board . 1243

1-click to ODU and than the ODU Interface in function tree and than Radio frequency attributers .2-Insert the Transmit frequency. 9

Create the ODU Board . 1243

1-click to ODU and than the ODU Interface in function tree and than Power attributers.2-Insert the Maximum Transmit Power.10Create the SL1D Board .

123

1-click to the SL1D than to configuration in the function tree and Open or close the port.

11Create the EM6 Board & the Ethernet serves.

1- click to the IF than to configuration and than to Ethernet Interface management than to Ethernet Interface.2-click to General Attributes and insert the Encapsulation to 802.1Q. 12

Create the EM6F Board & the Ethernet serves.

51-click to the NE than to configuration .2-click to Ethernet service management than to E-line service and than click to create. 13

1234Create the EM6F Board & the Ethernet serves. 51-Insert the Service ID & Service Name & set the Direction to UNI-UNI .2-Insert the source & sink , source to the port of the EM6F & sink to the port of the IF.3-Insert the Source VLAN & Sink VLAN than click Next. 14Create the EM6F Board & the Ethernet serves.

1231-click to the NE and than Ethernet Interface .2-click to General Attributes and Insert All as photo.

15Create the EM6F Board & the Ethernet serves.

12345

Create the Cross-Connections 12341-click to the NE and than to configuration and cross connection than click to New. 17

1234Create the Cross-Connections 1-insert the source and than source timeslot.2-insert the sink and than the sink timeslot & click OK.3- you can make a cross connection between any to Board .-take care the E1 dropt from what to what . 18Create an XPIC Protection Group

1-click to the NE and than to configuration2-click to the link configuration and XPIC tape 3-click to NEW19Create an XPIC Protection Group

1-Add IF Channel bandwidthNOTE: first change the IF Channel bandwidth from the hybrid/AM configuration 2-add polarization direction bored .3-add MAX transmit power & transmit power & transmit Frequency & than click OK20

Setting the Hybrid/AM Attributes of the XPIC Hybrid Radio Link

Create an XPIC 2+2 Protection Group

1-After finish create 2 XPIC group click to IF1+1 Protection22

Create an XPIC 2+2 Protection Group1-click to new than23

Create an XPIC 2+2 Protection Group

1-add the working board &protection board and click okNOTE: you do this two time one for V-polarization &and anther for H-polarization 24Create an XPIC 2+2 Protection Group

Creating a 1+1 Protection Group

1-Select the 1+1 SD/FD/HSB protection from the Working Mode drop-down list. 2-Select a working IF board and a protection IF board. In the case of 1+1 FD/SD protection group, the working board and protection boards must be configured in two paired slots.

26The End Thanks