rp seminar
DESCRIPTION
This ppt includes time compressive manufacturing technologies without using anyy tools and fixtures.TRANSCRIPT
![Page 1: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/1.jpg)
An Introduction to
RP Processes BY
Anand Khare 142110001
Arun Pandaran 142110002
![Page 2: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/2.jpg)
RP can be defined as the process of manufacturing physicalobject layer by layer manner directly from their CAD modelwithout any human intervention and without using any tools,dies, fixtures, etc.
RP process belong to the generative (or additive) productionprocesses.
In all commercial RP processes, the part is fabricated bydeposition of layers contoured in a (x-y) plane twodimensionally.
The third dimension (z) results from single layers being stackedup on top of each other, but not as a continuous z-coordinate.
![Page 3: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/3.jpg)
Part complexity.
Material.
Part quantity.
Part quality.
Cost.
![Page 4: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/4.jpg)
Increasing number of variants of products.
Increasing product complexity.
Production time is reduced.
Form- fit-function test.
Assembly can be made without joints.
![Page 5: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/5.jpg)
![Page 6: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/6.jpg)
Limited material option.
Inaccurate surface finish.
High Cost.
Limited size of prototypes.
Need for support structures.
![Page 7: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/7.jpg)
Generation of CAD model.
Conversion into .stl file.(Tessellation)
Slicing.
Generation of physical model.
Post processing.
![Page 8: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/8.jpg)
a) CAD model
b) .stl file or tessellation
c) Slicing
![Page 9: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/9.jpg)
Generation of physical model.
![Page 10: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/10.jpg)
Post processing. Removal of supports.
Cleaning of part (wiping, rinsing, ... )
Post curing.
Surface finishing.
![Page 11: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/11.jpg)
![Page 12: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/12.jpg)
Solid based
• Laminated object manufacturing.
• Selective laser sintering.
• 3D printing.
Liquid based
• Fuse deposition modeling.
• Stereo lithography.
• Solid ground curing.
![Page 13: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/13.jpg)
![Page 14: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/14.jpg)
Developed by Stratasys, USA.
Material used ABS(Acryonitrile Butadine Styrene), WAX.
Accuracy 0.127 mm
Robotically guided fiber extrusion.
![Page 15: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/15.jpg)
![Page 16: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/16.jpg)
![Page 17: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/17.jpg)
![Page 18: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/18.jpg)
Strengths No post curing is required.
Variety of materials can be used.
Little wastage of material.
Material has large shelf life.
Weakness Surface finish is poor.
Strength is low in vertical direction
Accuracy is less compared to other RP processes.
![Page 19: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/19.jpg)
![Page 20: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/20.jpg)
Developed by Cubic Technologies, Carson, CA (former
Helisys).
Material used plastic, paper.
Accuracy 0.076 mm
Basic manufacturing approach-
Cut and Paste approach.
Paste and cut approach.
![Page 21: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/21.jpg)
![Page 22: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/22.jpg)
![Page 23: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/23.jpg)
![Page 24: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/24.jpg)
Decubing Grid Cutting
![Page 25: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/25.jpg)
Strengths Prototyping time is proportional to surface area.
Cost of machine is one of the lowest.
Material used are least expensive.
Weakness Parts are weak in Z direction.
Prototype (paper) may absorb moisture.
Decubing is time consuming.
Laser spends more time in cutting the grids than useful part contours.
![Page 26: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/26.jpg)
Developed by Daimler Chyrsler in collaboration with IIT Bombay.
![Page 27: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/27.jpg)
![Page 28: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/28.jpg)
• Rapid prototyping is a new tool, which used appropriately ...
– allows the manufacturing enterprise to run smoother
– increases production rate and product quality
•New uses and applications are discovered everyday
• Future areas include new materials directly deposited (metals, ceramics)
![Page 29: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/29.jpg)
K.P. Karunakaran:” Rapid Product Development and
Manufacturing”, IIT Bombay, Chapter no. 15-16.
www.3Dsystem.com
www.sciencedirect.com
www.slideshare.com
![Page 30: Rp seminar](https://reader036.vdocuments.mx/reader036/viewer/2022062419/5597c77d1a28abba098b4814/html5/thumbnails/30.jpg)