roofing catalogue...deks® neo washer • 100% epdm • low carbon content • non-conductive...

ROOFING CATALOGUE

MULTIPLE DISTRIBUTION CENTRES NATIONWIDE

AUCKLANDMOUNT MAUNGANUIWELLINGTONCHRISTCHURCHINVERCARGILL

0800 EDL ROOF I [email protected]

CONTINUING THE LEAD IN QUALITY.

WE HAVE THE NATION COVERED.

E D L R O O F I N G C A T A L O G U E 3

4 ARMAGalv™ Screws

6 T17 Timbergrips™

7 Steelgrips™

8 Dualgrips™

9 Deep Drilling Scrws, Bi-Metal Screws

10 Wafer, Wingtek, Bugle Batten, Polycarbonate Screws

11 Stainless Steel Screws

12 Profile Roofing Washers

14 Rivets

16 Masterflash Range

18 Munzing Rings/Holderbats, Touchup paints

19 Drills, Driver Bits & Silicone Sealants

20 ARMAGalv™ Colortex™ Colour range

21 Roofing Screw Warranty – Terms and Conditions

INDEX

EDL’s self-drilling HWF roofing screws are supplied with high performance ARMAGalv™ anti-corrosive coatings and specialised materials to surpass the AS 3566:2002 standard for self-drilling screws in the building industry.

Extensive real world testing has established the durability of our new coating, including on the under-head and shank of the screw. Being comprised of a hard, high density alloy it is retained post driving significantly improving the life of the fastener, sheeting and purlins.

The thinner coating has less driving resistance and thread galling and the unique alloy has a low coefficient of friction making for faster, easier driving. ARMAGalv™ screws are fully compatible with all steel based substrates commonly used in New Zealand. Available in plain and in the Colortex™ range of colours to match roofing and vertical cladding colours.

ARMAGalv™ ROOFING SCREW RANGE

OUTSTANDING CORROSION PERFORMANCE IN NEW ZEALAND CONDITIONS

ARMAGalv™ GALVANISED COATING SYSTEM. ARMAGalv™ screws use a new and innovative protective coating that is extremely resistant to corrosion. It does NOT need any extra hybrid coatings applied to it to achieve outstanding corrosion performance in New Zealand’s conditions. The coating has bridged the gap between Stainless Steel and Galvanising in the fastener industry. This unique coating is Hydrogen Embrittlement free, drills faster, lasts longer and adheres strongly to the metal substrate. ARMAGalv™ has been engineered to perform in real world applications and is suitable for use in ISO 9223 categories 2, 3, 4 and 5.

TIMBERGRIP™ WITH ARMAGalv™ CATEGORY 5 COATINGType 17 drill point with a cut in the tip flutes specifically for drilling into timber or through thin steel up to 0.75mm. Ideal for screwing roofing to timber frames, purlins or battens.

STEELGRIP™ WITH ARMAGalv™ CATEGORY 5 COATING Metal self-drillers - sometimes referred to as Teks, SDS or SDM. Used for drilling into steel purlins or battens usually up to 2.4mm thick.

DUALGRIP™ WITH ARMAGalv™ CATEGORY 5 COATING Dual-purpose screw for fixing roofing and cladding to timber purlins, steel purlins (up to 2.4mm thick), or metal battens.

ENHANCED DRILL SPEEDS. ARMAGalv™ offers up to 30% faster drilling speeds. This is due to the coating’s lower coefficient of friction and adhesion to the substrate during installation.

OPITO BAY. INSTAGRAM.COM/CAPTUREDBYVANESSA

6 E D L R O O F I N G C A T A L O G U E

Features

ARMAGalv™ Category 5 Coating• Nominal 35 microns of modified mechanical galvanising• No hybrid top coatings needed Type 17 drill point • Type 17 parallel shank thread for constant clamp load. • Special end slot for a thread cutting action into the timber. • ARMAGalv™ plated, drills, fastens and seals in one operation. • Designed for maximum reliability and ease of use. DEKS® neo washer • 100% EPDM• Low carbon content• Non-conductive

Type 17 Timbergrip™ HWF Roofing Screws with Neo and ARMAGalv™ coatingWith Neoprene Washer Standard Pack sizes

Gauge TPI Length^ Order Code Hex Drive Socket, inch Standard Bulk

10 12 20 35101220AN** 5/16 500 100010 12 25 35101225AN** 5/16 500 100012 11 25 35121125AN** 5/16 500 100012 11 35 35121135AN** 5/16 500 100012 11 40 35121140AN** 5/16 500 200012 11 45 35121145AN** 5/16 500 100012 11 55 35121155AN** 5/16 500 100012 11 65 35121165AN** 5/16 500 120012 11 75 35121175AN** 5/16 500 100014 10 25 35141025AN** 3/8 500 100014 10 50 35141050AN** 3/8 500 100014 10 65 35141065AN** 3/8 500 100014 10 75 35141075AN** 3/8 500 80014 10 90 35141090AN** 3/8 500 100014 10 100 351410100AN** 3/8 500 600

Notes: ^ Denotes length in mm measured from the underside of the screw head. ** denotes the colour code from the Colortex™ range

Performance DataDiameter and Thread Pitch

10 -10 12 - 14 14 - 10

Specification Unit Technical Req’s

ActualTest Data

Technical Req’s

ActualTest Data

Technical Req’s

ActualTest Data

Axial Withdrawal Force kN 2.50 2.80 2.80 6.10 3.10 7.10

Axial Tensile Strength kN 7.50 - 11.30 15.60 15.00 22.00Torsional Strength Nm 5.40 10.06 9.50 13.20 14.10 22.50

NOTE:• AS 3566.2-2002 specifies that withdrawal tests be carried out from F5 seasoned radiate pine with a maximum moisture content of 15% and a minimum density of 380 kg/m³,

determined in accordance with AS 1649 and AS 1080.1, respectively. Penetration depths shall be 24/26mm for No. 10 screws, 29/31mm for No. 12 screws and 34/36mm for No. 14 screws.

• All hexagon washer headed screws shall be able to penetrate steel of 0.42mm thickness Steel made from steel grade G550 to AS 1397.• Values quoted are the average of all tests. All samples exceeded the minimum requirements specified in AS 3566.0-2002.• AS 3566.0-2002 does not specify values for Single Shear Load, values shown are for loading through the shank and are provided for information only.

TYPE 17 TIMBERGRIPS™

HEAD STAMP ‘e5’ INDICATES EDL ARMAGalv™CATEGORY 5.


Features

ARMAGalv™ Category 5 Coating• Nominal 35 microns of modified mechanical galvanising• No hybrid top coatings needed DEKS® neo washer • 100% EPDM• Low carbon content• Non-conductive Self-drilling screws with a hardened drill point.• Drills and thread in structural steel and mild steel.Combines drilling, tapping and fastening into one easy operation.• Enhanced pullout resistance achieved with the specially designed drill tip and thread profile.

Self-Drilling Hex Head Cat 5 – Galvanised With Neoprene Washer Standard Pack sizesGauge TPI Length^ Order Code Hex Drive Socket, inch Standard Bulk

10 16 16 34101616N** 5/16 500 400010 16 25 34101625N** 5/16 500 100012 14 20 34121420N** 5/16 500 100012 14 25 34121425N** 5/16 500 100012 14 35 34121435N** 5/16 500 100012 14 45 34121445N** 5/16 500 100012 14 55 34121455N** 5/16 500 100012 14 65 34121465N** 5/16 500 100012 14 75 34121475N** 5/16 500 100012 24 20 34122420N** 5/16 500 100014 10 22 34141022N** 3/8 500 100014 10 50 34141050N** 3/8 500 100014 10 65 34141065N** 3/8 500 100014 10 75 34141075N** 3/8 500 80014 10 90 34141090N** 3/8 500 700

NOTE:^ Denotes length in mm measured from the underside of the screw head. ** denotes the colour code from the Colortex™ range

SELF DRILLING STEELGRIP™ SCREWS FOR STEEL

Diameter and Thread Pitch10 -10 12 - 14 14 - 10

Specification Unit Technical Req’s

ActualTest Data

Technical Req’s

ActualTest Data

Technical Req’s

ActualTest Data

Axial Withdrawal Force kN 2.50 4.20 2.80 4.30 3.10 3.80

Axial Tensile Strength kN 8.60 - 11.63 18.50 14.95 21.40Torsional Strength Nm 6.90 9.10 10.90 15.20 14.10 25.10

NOTE:• AS 3566.2-2002 specifies that withdrawal tests be carried out from 1.6mm thick zinc coated steel, Type G450-Z275 in accordance with AS 1397.• Values quoted are the average of all tests. All samples exceeded the minimum requirements specified in AS 3566.0-2002.• AS 3566.0-2002 does not specify values for Single Shear Load, values shown are for loading through the shank and are provided for information only.

Performance Data



ARMAGalv™ Category 5 Coating• Nominal 35 microns of modified mechanical galvanising• No hybrid top coatings needed • ARMAGalv™ plated, drills, fastens and seals in one operation. • Designed for maximum reliability and ease of use. DEKS® neo washer • 100% EPDM• Low carbon content• Non-conductive

Features• Dual purpose fastener -- for fixing roofing and cladding to steel purlins, timber or metal battens.• For crest fixing corrugated and trapezoidal roofing into timber and up to 2mm thick steel purlins.• Self-drilling screws with special designed Type 17 A/P (all purpose) drill point.• Workable for all applications – “steel to steel”, “steel to timber.”• Enhanced pullout resistance achieved with the twinstart thread system.• Drills a clear hole in steel and timber.• No timber splitting.• Prevents overdrilling and grips roofing sheet to joint with the washer face.

DualGrip™ Self-Drilling Screws Cat 5 - with Neoprene Seal

Plain Galvanised Standard Pack sizesGauge TPI Length^ Order Code Standard Bulk

12 11 45 34A121145AN** 500 100012 11 55 34A121155AN** 500 100012 11 65 34A121165AN** 500 1000


Performance Data

Diameter and Thread Pitch12 - 11

Specification Unit Technical Req’s Actual Test Data(Timber)

Actual Test Data(Steel)

Axial Withdrawal Force kN 2.80 4.20 4.40Axial Tensile Strength kN 11.63 16.80 16.80Torsional Strength Nm 10.90 15.00 14.50

• AS 3566.2-2002 specifies that withdrawal tests be carried out from F5 seasoned radiate pine with a maximum moisture content of 15% and a minimum density of 380 kg/m³, determined in accordance with AS 1649 and AS 1080.1, respectively. Penetration depths shall be 24/26mm for No. 10 screws, 29/31mm for No. 12 screws and 34/36mm for No. 14 screws.

• AS 3566.2-2002 specifies that withdrawal tests be carried out from 1.6mm thick zinc coated steel, Type G450-Z275 in accordance with AS 1397.• All hexagon washer headed screws shall be able to penetrate steel of 0.42mm thickness Steel made from steel grade G550 to AS 1397.• Values quoted are the average of all tests. All samples exceeded the minimum requirements specified in AS 3566.0-2002.• AS 3566.0-2002 does not specify values for Single Shear Load, values shown are for loading through the shank and are provided for information only.

DUALGRIPTM SELF-DRILLING SCREWS FOR TIMBER OR STEEL. For crest fixing roofing into steel or timber purlins



DEEP DRILLING SCREWS FOR HEAVY STEEL PURLINS AND SECTIONS

Steelgrip™ HWF Roofing Screws with Neo and Series 500 Drill PointGauge TPI Length ^ Order Code Drilling Capacity

12 24 32 34122432500N** 4.0mm to 12.5mm12 24 50 34122450500N** 4.0mm to 12.5mm12 24 65 34122465500N** 4.0 to 12.5mm

SUPER TEK™ HWF Roofing Screws with Neo and Heavy Section drill point*Gauge TPI Length ^ Drilling Capacity

12 24 50 4.0mm to 18.0mm14 14 60 4.0mm to 22.0mm

STAINLESS Bi-METAL SCREWS

• Fixing cladding and roofing applications to steel purlins and sections • 304 Stainless Steel shank • Carbon Steel drill tip welded to shank to provide improved drilling, won’t burn out, and

eliminates the need for pre-drilling. • Ultimate corrosion protection gives long-term durability of the fastener.

Bi-Metal Self-drilling screws HWF 304 Stainless Steel Gauge TPI Length ^ Order Code Drilling Capacity

12 24 38 34SB122438** 4.0mm to 12.5mm12 24 65 34SB122465** 4.0mm to 12.5mm12 24 100 34SB1224100** 4.0mm to 12.5mm


• Super hard, super sharp drill tip ensures fast drill times • Bonded Steel Washer provides isolation and weatherseal • Thread form design ensures consistent tapping and superb holding power

SUPER TEK™ HWF Screws

SERIES 500 DEEP DRILLING SCREWS

*Lead times for this product may apply


WAFER, WINGTEK, BUGLE BATTEN , POLYCARBONATE GALVANISED SCREWS

Type 17 Timber Wafer Head ScrewsGALVANISED CLASS 3

Gauge TPI Length ^ Order Code10 12 25 35W101225** PHILLIPS10 12 35 35W101235** PHILLIPS

(Note - ** denotes the colour code from the Colortex™ range)

Type 17 Timber Bugle Batten Screws GALVANISED CLASS 4

Gauge TPI Length ^ Order Code14 10 50 35BB14105014 10 65 35BB14106514 10 75 35BB14107514 10 90 35BB14109014 10 100 35BB141010014 10 125 35BB141012514 10 150 35BB1410150

SDS Wafer Head Screws Phillips Drive Class 3GALVANISED CLASS 3

Gauge TPI Length Order Code8 18 20 34WQ81820

10 16 16 34WQ10161610 24 22 34WQ10242210 24 30 34WQ102430

Self-drilling Wingtek Screws Countersunk Phillips DriveGALVANISED CLASS 3

Gauge TPI Length ^ Order Code8 18 20 34WQ81820

10 16 16 34WQ10161610 24 22 34WQ10242210 24 30 34WQ102430

POLYCARBONATE ROOFING SCREW

Hex Washer Face Self-Drilling Screws Class 4 -- with Dome Shaped Washer

The polycarbonate roofing screw comes with a unique design that eliminates having to pre-drill an expansion hole. It only requires a power drill/screw gun and a 5/16” hex socket. No drill bit is required. Temperature changes will cause clear roofing to expand and contract, so allowances need to be made for thermal movement. In all cases, refer to the clear roofing suppliers’ installation instructions.The polycarbonate roofing screw has a hex head with polycarbonate dome seal washer to suit either fibreglass or polycarbonate roof sheets. With its DualgripTM feature, the polycarbonate roofing screw is applicable for fixing the polycarbonate roofing to both timber and metal purlins.

Plain Galvanised

Gauge TPI Length ^ Order Code Hex Drive Socket, inch

12 14 50 34P121450N 5/16


Type 17 Screws HWFSTAINLESS STEEL T304

Gauge TPI Length ^ Order Code12 11 35 35S12113512 11 50 35S121150N12 11 65 35S121165N14 10 35 35S14103514 10 75 35S14107514 10 100 35S1410100N

STAINLESS STEEL SCREWS

Type 17 Timber Bugle BattenSTAINLESS STEEL T304

Gauge TPI Length ^ Order Code14 10 50 35BBS14105014 10 60 35BBS14106014 10 75 35BBS14107514 10 100 35BBS141010014 10 125 35BBS1410125M (NOTE 316)14 10 150 35BBS1410150

Self Drilling screws HWF STAINLESS STEEL T304

Gauge TPI Length ^ Order Code10 16 16 34S10161612 14 20 34S121420NU12 14 25 34S12142512 14 50 34S121450N14 10 25 34S141025N14 10 90 34S141090

Wafer Screws – 304 Stainless Steel

STAINLESS STEEL T304Gauge TPI Length ^ Order Code

10 16 22 34WS10162210 16 38 35WQS10163810 24 30 34WS102430M (NOTE 316)



V8 Profile Roofing Washer

Suitable for LT7, V8, Six Rib, ST7, Met-Dek and similar.

Thickness Code Description

0.95mm 70WZV8 Aluzinc Unbonded

1.2mm 70WAV8 Aluminium Unbonded

CR Profile Roofing Washer

Suitable for corrugated profiles, trapezoidal profiles, corrugated, Trimdek staleline, Custom Orb, and similar.


0.95mm 70WZCR Aluzinc Unbonded

GALAXY Profile Roofing Washer

This dual profile washer is suitable for both sinusoidal and trapezoidal profiles.


1.0mm 70AG14 Galvanised Steel Bonded with EPDM sealing washer

PROFILE ROOFING WASHERS

• Meets the load ratings for the respective profiles when installed as per the NZMRM Code of Practice.

• All metal washers are available painted to match the roofing and Wall Cladding screws.

Mega 5 Profile Roofing Washer Suitable for Mega 5, Solar Rib and other commercial profiles.


0.95mm 70WZM5 Aluzinc Unbonded

1.2mm 70WAM5 Aluminium Unbonded


Aluminium Embossed EPDM Washer

EPDM seal bonded to cone shaped metal washer.

Size Code

7mm ID x 19mm OD 70WABNP7

7mm ID x 25mm OD 70WABNP25 EPDM Sealing Washer

Non conductive EPDM rubber sealing washer for effective weather sealing with metal profile washers. Use with unbonded metal profile washer.

Size Code 30mm 70WGPS30

35mm 70WGPS35

Polycarbonate Roofing Washer EPDM dome shaped moulded washer.

Size Code

26mm 70WP26

BB900 Profiled Washer Suitable for large commercial trapezoidal profiles.

Description Thickness Code

Aluzinc AZ150 steel 0.95mm 70WZBB900

PROFILE ROOFING WASHERS


Rivets are folding type rivets made of aluminium, steel or stainless steel. These rivets have been specially designed for applications in the building sector.

RIVETS

Representative Rivet product code for ordering:

73 A S L 4 - 3 GF

Button head type

Rivet material (A=aluminium, ST=Stainless Steel)

Stem (S=steel zinc plated, ST=Stainless Steel)

Large Flange (if required)

No.4 –rivet diameter in 4/32” or 3.2 mm

No.3 –grip range in 3/16” or 4.8 mm

Colortex® Colour (e.g: Grey Friars)Notes:• All rivets are available painted to match the roofing/wall cladding and screws/washers.

Rivet diameter based on multiples of 1/32”: Grip range is based on multiples of 1/16”:

Rivet Diam Inch mm Inch mm

3 3/32” 2.4mm 1/16” 1.6mm4 4/32 3.2mm 1/8” 3.2mm5 5/32” 4.0mm 3/16” 4.8mm6 6/32 4.8mm 1/4” 6.4mm

5/16” 8.0mm

AS STSTAluminium Rivet Grade 5056 Steel Zinc Plated Stem

Stainless Steel Rivet Grade 302/384 Stainless Steel Stem

Rivet Materials

Rivet Code System

Rivets are generally identified by the rivet diameter and the grip size.


Type AS

Drill size

Rivet Dia.

Rivet code73AS

Rivet code

73ASL

Large Flange

Dia.mm

Head Dia.mm

Shell length

mm

Grip Range

mm

AS Typical Strength

ASL (large flange)

Typical strength

Shear Tensile Shear Tensile

2.5 mm2.4 mm 3 - 2 4.70 5.5 1.6 - 3.2

445N 750N2.4 mm 3 - 3 4.70 7.0 3.2 - 4.8

3.3mm

3.2mm 4 - 1 6.35 4.7 Up to 1.6

1023N 1557N 740N 980N

3.2mm 4 - 2 4 - 2 6.30 6.35 6.3 1.6 - 3.2

3.2mm 4 - 3 6.35 7.9 3.2 - 4.8

3.2mm 4 - 4 4 - 4 9.50 6.35 9.5 4.8 - 6.4

3.2mm 4 - 5 6.35 11.1 6.4 - 7.9

3.2mm 4 - 6 4 - 6 12.70 6.35 12.7 7.9 - 9.5

3.2mm 4 - 8 6.35 16.4 9.5 - 12.7

3.2mm 4 - 10 6.35 20.1 12.7 - 15.9

3.2mm 4 - 12 6.35 23.3 15.9 - 19.0

4.1mm

4.0mm 5 - 2 8.00 7.1 1.6 - 3.2

1490N 2514N 1180N 1600N

4.0mm 5 - 3 8.00 8.7 3.2 - 4.8

4.0mm 5 - 4 5 - 4 10.30 8.00 10.3 4.8 - 6.4

4.0mm 5 - 5 8.00 11.9 6.4 - 7.9

4.0mm 5 - 6 5 - 6 13.50 8.00 13.5 7.9 - 9.5

4.0mm 5 - 8 8.00 17.1 9.5 - 12.7

4.9mm

4.8mm 6 - 2 9.53 7.9 1.6 - 3.2

2180N 3849N 1540N 2230N

4.8mm 6 - 3 9.53 9.5 3.2 - 4.8

4.8mm 6 - 4 6 - 4 11.00 9.53 11.0 4.8 - 6.4

4.8mm 6 - 5 9.53 12.6 6.4 - 7.9

4.8mm 6 - 6 6 - 6 14.20 9.53 14.2 7.9 - 9.5

4.8mm 6 - 8 6 - 8 17.90 9.53 17.9 9.5 - 12.7

4.8mm 6 - 10 6 - 10 21.10 9.53 21.1 12.7 - 15.9

4.8mm 6 - 12 6 - 12 24.20 9.53 24.2 15.9 - 19.0

4.8mm 6 - 14 6 - 14 27.40 9.53 27.4 19.0 - 22.2

4.8mm 6 - 16 6 - 16 30.60 9.53 30.6 22.2 - 25.4

4.8mm 6 - 20 9.53 36.0 25.4 - 34.9

Type STST

Drill size Rivet Dia. Rivet code73STST

Head Dia. mm

Shell length

mm

Grip Range

mm

Typical Strength

Shear Tensile

3.3mm 3.2mm 4 - 2 5.72 6.8 1.6 - 3.2

2180N 2715N3.2mm 4 - 3 5.72 8.4 3.2 - 4.8

3.2mm 4 - 4 5.72 10.0 4.8 - 6.4

4.1mm 4.0mm 5 - 2 6.73 6.8 1.6 - 3.2

3330N 4450N4.0mm 5 - 3 6.73 8.4 3.2 - 4.8

4.0mm 5 - 4 6.73 10.0 4.8 - 6.4

4.0mm 5 - 6 6.73 13.2 7.9 - 9.5

4.9mm 4.8mm 6 - 2 7.77 8.4 1.6 - 3.2

4450N 6119N4.8mm 6 - 3 7.77 10.0 3.2 - 4.8

4.8mm 6 - 4 7.77 11.6 4.8 - 6.4

4.8mm 6 - 6 7.77 14.8 7.9 - 9.5

RIVET SIZE GUIDE


• Weather Protection: Made of EPDM, these flashings all have a black compound created specifically for maximum resistance to weathering due to ozone and ultraviolet light.

• Base Flexibility: The soft aluminium base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

• Easy on-site customization: fast, one piece construction allows for easy on-site installation in usually 5 minutes.

Part Number Description Pipe Size Base Size (square)70MFSMINIB Mini 3-19mm 57mm70MFS1B No 1 6-70mm 114mm70MFS3B No 3 6-146mm 203mm70MFS4B No 4 70-178mm 254mm70MFS5B No 5 102-210mm 279mm70MFS6B No 6 121-254mm 304mm70MFS7B No 7 140-292mm 355mm70MFS8B No 8 171-343mm 431mm70MFS9B No 9 241-520mm 635mm70MFSMAXIB Maxi 304-724mm 863mm

Multi-Port Master Flash®

•Smooth cut is intended to eliminate razor knives.• Easy install stainless steel gripper to secure a retro custom fit.• Up to 4 Cables or Wires per flashing.• Flashing and gripper sold seperately.

Part Number Description Pipe Size Base Size (square)

70MFMP1B No1 6-70mm 114mm70MFGRIP1 Gripper No1

Multi Flash Master Flash®

• Easy on-site customizing.• Smooth cut is intended to eliminate razor knives. • Flashing and gripper sold separately.

Part Number Description Pipe Size Base Size (square)70MFMF3B No3 6-146mm 203mm70MFGRIP3 Gripper No370MFMF5B No5 102-209mm 279mm70MFGRIP5 Gripper No570MFMF8B No8 171-342mm 431mm70MFGRIP8 Gripper No8

Standard Master Flash®

THE MASTER FLASH® RANGE


Vent Master Flash® Pipe Flashing

Part Number Description Pipe Size Base Size (square)70MFS2B No 2 50-70mm 152mm

Solar Master Flash®

• With a precut hole for pipe sizes 3/4” to 1” inch allowing minimal on-site preparation and assembly.

Part Number Description Pipe Size Base Size (square)70MFSFB Solar Flash 19-25mm 101mm

ARMAGalv™ ROOFING SCREWOUTSTANDING CORROSION PERFORMANCE IN NEW ZEALAND CONDITIONS

IMAGE: INSTAGRAM.COM/CAPTUREDBYVANESSA


• An optimum solution for securing downpipes to the building • Kit comes complete with Munzing Ring/Holderbat and bolts, 3 sizes of threaded stud, and matching back-plate • To suit 65mm, 80mm, or 100mm downpipes • Plain or painted in the Colortex® colour range • Made from corrosion resistant aluminium for longer life

Touch-up PaintColour Order Code

Titania T 60TOUCHUPTBone White BW 60TOUCHUPBWSmooth Cream SC 60TOUCHUPSCDesert Sand DS 60TOUCHUPDSGull Grey GG 60TOUCHUPGGSandstone Grey SG 60TOUCHUPSGSlate SL 60TOUCHUPSLWindsor Grey WG 60TOUCHUPWGGrey Friars GF 60TOUCHUPGFNew Denim Blue NDB 60TOUCHUPNDBBlack B 60TOUCHUPBLignite LI 60TOUCHUPLILichen L 60TOUCHUPLIronsand IS 60TOUCHUPLIMist Green MG 60TOUCHUPMGRivergum R 60TOUCHUPRPermanent Green PG 60TOUCHUPGKaraka K 60TOUCHUKPioneer Red PR 60TOUCHUPRScoria S 60TOUCHUPS

Colour matched to coil colours, designed to have similar fade characteristics to coil colours

For use on MINOR scratches only.

MUNZING RING / HOLDERBAT KITS

TOUCH-UP PAINT


ATORN® Industrial Grade Silicone Sealant

• A neutral (non-acidic) silicon sealant,will not corrode galvanised steel.• Sealing roof flashings, lap joints in gutters, downpipes and other sheet metal components.• General purpose adhering and sealing.• UV and weather resistant. • Low odour.• Thixotropic -- no dilute running effect.

Description Size Code Industrial Grade Sealant Clear 300ml Cartridge 60SIAC

Simson® 70-03 Multi-Purpose Sealants

• High performance sealant adhesive.• Suitable for all roofing applications. • Adheres to glass, aluminium, masonry,concrete, stone, most metals and plastics.• Weather resistant.• Elastic.• Neutral cure.

Colour Size Code Black 290ml Cartridge 60SI7003BC Grey 290ml Cartridge 60SI7003GCWhite 290ml Cartridge 60SI7003WC

Size (mm) Order Code1.0 171.0PP1.5 171.5PP2.0 172.0PP2.5 172.5PP3.0 173.0PP3.5 173.5PP4.0 174.0PP4.5 174.5PP5.0 175.0PP5.5 175.5PP6.0 176.0PP6.5 176.5PP7.0 177.0PP

Size (mm) For screw sizes Order Code1/4 X 42mm 6g & 8g 15N1440C1/4 X 65mm 6g & 8g 15N1465C5/16 X 45mm 10g & 12g 15N51642C5/16 X 65mm 10g & 12g 15N51665C3/8 X 45mm 14g 15N3840C3/8 X 65mm 14g 15N3865C

Hex Nut Setters

Size (mm) Length Order CodeNo 1 25mm 15PH125No 1 50mm 15PH150No 1 90mm 15PH190No 2 50mm 15PH250No 2 150mm 15PH2150No 2 178mm 15PH2178No 3 50mm 15PH350

Phillips Drive Bit

Size (mm) Length Order CodeNo 1 25mm 15S125No 1 50mm 15S150No 1 75mm 15S175No 1 90mm 15S190No 2 25mm 15S225 No 2 50mm 15S250 No 2 70mm 15S270 No 2 75mm 15S275 No 2 90mm 15S290 No 3 50mm 15S350

Square drive bit

Drill bits

SEALANTS & MISC.


All EDL ARMAGalv™ Roofing Screws are available in plain galvanised finish, or can be painted to match the colour of the sheeting they are fixing.

All paint systems fade in New Zealand due to our harsh climatic conditions. However, the Colortex™ paint system EDL uses has been developed for superior colour fade characteristics that results in it matching the sheeting it is fixing, and meeting the requirements of AS/NZS2728 for colour fade.

EDL applies a paint system that utilises coil paint baked onto the screws, giving superior adhesion and colour retention.

See warranties section for full details on the paint system warranty. The Colortex™ colour range includes the standard Colorsteel®, ColorCote®, or KiwiColour® colours. Note special colours are available on request – minimums and lead-times may apply.

ARMAGalv™ COLORTEX™ COLOUR RANGE.

COLORTEX® COLOUR CHARTThe colour coating on the head of the ARMAGalvTM TIMBERGRIPTM, ARMAGalvTM STEELGRIP and ARMAGalvTM DUALGRIPTM screws range is available in the following standard colours.

Titania T

Windsor GreyWG

Mist Green MG

Bone White BW

Grey Friars GF

Rivergum RG

Smooth Cream SC

New Denim Blue NDB

Permanent Green PG

Desert Sand DS

Ebony/BlackB

Karaka K

Gull GreyGG

Lignite LI

Pioneer Red PR

Sandstone Grey SG

Lichen L

Scoria SO

Slate SL

Ironsand IS

Flaxpod® / Lancewood FP

Stone/PebbleST

Thunder GreyTG

CloudCL

Contact your nearest EDL Roofing partner or EDL Roofing Division: • For colours not listed above.• For non - standard colours, please supply a colour sample, 25cm x 25cm for colour matching. Note that lead times, minimum order

quantities, surcharges may apply.• Colours are representative given the limitations of printing. For accurate colour matching contact EDL Roofing

Division for a sample or advice.• Please note EDL Fasteners minimum order quantities for painted items do apply.


This warranty is to be read in conjunction with EDL Fasteners’ terms of sale.

WarrantyAll EDL Fasteners ARMAGalv™ screws carry the following warranty from the date of installation, subject to the terms and conditions below:

^^These are general guidelines only. Building location, design & aspect need to be taken into account.

* All EDL ARMAGalv™ screws carry the following warranty from the date of installation, subject to the terms and conditions below, against structural defects or failure, or metallurgical defects, of the fastener.

**All EDL ARMAGalv™ screws carry the following warranty from the date of installation, subject to the terms and conditions below, against excessive fade of the decorative paint film on the fastener as determined in AS/NZS2728.

Category (as per AS/NZ 2728) ^^ Roofing*ARMAGalv™

Vertical Cladding* ARMAGalv™

Paint Film** ARMAGalv™

ISO Category 5Very severe marine – Off shore and within 400 metres from the coast. May extend inland depending on local conditions

Very Severe Industrial and Geothermal – Characterised by heavy emissions from industrial sites, or areas of geothermal activity

15 Years 15 Years 15 Years

ISO Category 4Begins from 400 metres from the coast. May extend inland depending on local conditions


ISO Category 3Marine – areas further inland than Category 4, and can be influenced by coastal salts 30 Years 15 Years 15 Years

ISO Category 2 Moderate – Inland, areas not influenced by industrial sites, or rural areas


ROOFING SCREW WARRANTY - TERMS AND CONDITIONS


Terms and Conditions1. This warranty is subject to the minimum maintenance requirements, set out in paragraph 7 below, being met. Failure of the product due to inadequate maintenance is not covered. If the minimum maintenance requirements have not been followed, then the customer must show that the failure of the product was not caused by failure to follow the minimum maintenance requirements.

2 Installation a. The fasteners must be installed according to the New Zealand Metal Roof Manufacturers Inc. (“NZMRM”) Code of Practice, and good trade practice. There must be no physical damage to the fasteners during installation (e.g. damage to the protective decorative or metallic coating, etc.) b. The use of impact drivers to install fasteners can cause damage to the decorative and/or protective metallic coating. This damage is not covered by this warranty.

3. Limitation- the warranty will not apply where:a. The incorrect fastener has been selected for the environment or profile. It is the user’s responsibility to identify the appropriate atmo¬spheric environments, and any special conditions or micro-climates present, for the life of the fastener, to ensure the correct fastener selection. If in doubt consult the EDL Roofing Technical Specialist.b. The fastener is being used for an application for which the fastener is not primarily intended, for example (without limitation) tanneries, or swimming pools etc. Any special applications should be discussed with the EDL Roofing Technical Specialist. c. Damage is caused to the product after the product has left EDL’s control and before it is installed. d. Defects or failures have been caused by faulty building design or method of construction/manufacture.e. The fastener is not compatible with the roofing or wall cladding material with which it is being used.f. Material changes in the use of the building which cause contaminants to become present.g. To the extent permitted by applicable law, if any alleged defect, fault or default arises, in whole or in part from the following conditions:i. chemical, mechanical or other damage sustained during storage (including, without limitation, due to inappropriate storage conditions), handling, installation or subsequent to installation of the product;ii. damage caused by fumes, solids, liquids or chemical agents, other than direct rain falling on the products;iii. contact with soil, ashes, fertilisers or other moisture-retaining substances;iv. areas in direct contact with lead, copper or brass, or subject to water runoff from flashings or pipes made from these mate¬rials;v. storm, volcanic/geothermal activity, tempest, war or Acts of God;vi. metal fatigue caused by incorrectly installed or tensioned products and/or other fasteners;vii. changes to existing environmental conditions that impact detrimentally on the products.

4. Notice of DefectThe warranty is subject to the customer giving EDL written notification of any alleged defect within 14 days of the customer (or any officer, em¬ployee or agent of the customer) first becoming aware of the alleged defect or from when the customer (or any officer, employee or agent of the customer) reasonably ought to have become aware of the alleged defect (whichever is the earlier). The customer must provide full details in the written notification of the alleged defect, including a copy of the proof of purchase and details of the date of installation, the head mark on the fasteners, the roofing material the screws were fixing and the location and address where the alleged defect has occurred. Any claim is subject to inspection by EDL before any action is taken.

5. Environmental CharacteristicsEnvironmental Characteristics should be used as a guide only. The warranty indicates the period of time that products are expected to fulfil their functional requirements with normal maintenance. In addition, these special conditions must be taken into account:i. GEOTHERMAL – Variations in natural activity or draw-off from steam bores plus the effects of weather conditions makes it impossible to precisely define the boundaries of these zones.ii. WEST COAST SOUTH ISLAND – Coal burning fires cause high concentrations of sulphur dioxide in the air, the high rainfall and the effects of a severe marine environment produce very aggressive conditions for this region.iii. MICROCLIMATE – Internal and external microclimates with high humidity condensation and pollution will alter the catego-ries, and local knowledge is important in assessing the corrosivity of the location.

6. RemedyIf EDL is liable to the customer, whether under this warranty, in tort or otherwise, EDL’s liability will in all cases be limited to the replacement of the defective fastener (for the avoidance of doubt, this does not extend to the costs associated with the installation of the defective fastener or the repair or replacement of any roofing components or materials or other consequential costs directly or indirectly ensuing from or caused by the defective fastener) and will in no case exceed the cost of the defective product. There are no other implied terms and conditions under this warranty. EDL will not be liable for any other loss or damage howsoever caused including direct; indirect; consequential; or incidental damages.

7. MaintenanceTo ensure the performance of the fastener over its life, and to help prevent corrosion, regular maintenance is required. This includes the removal of dirt, contaminants, and debris from the fastener (including under solar collectors, sky aerials, and other devices installed on the roof or wall cladding). Generally, adequate rainfall will wash the fasteners, but in areas of low rainfall, or in naturally unwashed areas of the building or on low roof pitches or underneath devices, more frequent manual washing is required. This should be carried out using a soft bristle broom fresh water, or with a low-pressure water-blaster (working away from the laps). More severe atmospheric environments will require more frequent maintenance. In all cases observe safe work practices. For specific advice or recommendations contact the EDL Roofing Technical Specialist.

8. Statutory Warranties. a) The Consumer Guarantees Act 1993 (“CGA”), and other statutes may impose warranties, conditions or obligations upon EDL which cannot by law (or which can only to a limited extent by law) be excluded. Other than as expressly provided for in these terms, to the extent permitted by law, EDL excludes all such imposed warranties, conditions or obligations and excludes any warranty, condition or obligation imposed or implied under common law, equity or otherwise.b. Specifically, where the customer acquires goods from EDL for the purposes of a business:i. the parties acknowledge and agree that the customer is acquiring the goods under these terms for the purposes of a business in terms of sections 2 and 43(2) of the CGA; andii. the customer agrees that all warranties, conditions and other terms implied by the CGA or any other statute or common law are excluded from these terms to the fullest extent permitted by law.

9. Wear and TearThis warranty does not cover damage caused by fair wear and tear of the fasteners.

CO N S U M A B L E R A N G E C A T A L O G U E

A V A I L A B L E O N R E Q U E S TCustomer care team: 0800 304 316 I www.edlfast.co.nz

We reserve the right to conduct product changes which, in our view, serve to improve quality at any time with or without notice. Images displayed may differ in appearance from the delivered product. Therefore we reserve the right for printing errors and assume no liability. These are our general terms and conditions.

Head Office15 Business Parade North

East TamakiPhone: 09 265 1609

[email protected]

Mt Maunganui34 Newton Street

Phone: 07 574-5650 Fax: 07 574-5652

[email protected]

Wellington493 Hutt Road

Phone: 04 569-7860 Fax: 04 569-7621

[email protected]

Christchurch55 Magdala Place

Phone: 03 366-4900 Fax: 03 366-7400

[email protected]

Invercargill130 Bond Street

Phone: 03 929-6554 Fax: 03 218 3165

[email protected]

DATE OF PUBLICATION: 27/11/2017

roofing catalogue...deks® neo washer • 100% epdm • low carbon content • non-conductive...

Documents