rollstar · 2020. 11. 5. · 5.6.9 rollstar-ex hem pocket headbox not shown floor or wall mount...
TRANSCRIPT
-
FOR DESIGNERS ANDWINDOW COVERING PROFESSIONALS
[ROLL SHADES FOR REGULAR, VERTICAL WINDOWS]
Rollstar TM SPECIFICATION SHEETS ~ JUNE 2019
-
Castec Solar Solutions | ROLLSTAR | page iiCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
INDEX NO. LIFTING SYSTEM HEM STYLE VALANCE LIGHT CONTROL OPTION ASSEMBLY OPTION PAGE NO.
5.1.1 Cord & Cleat Lift Rail Fabric Valance Top Not Shown Top Down Rollstar, (4040 Fascia on bottom) 1
5.2.27 SL20 Clutch - CCO Hem Bar Not Shown Not Shown Hem Bar & Hem Pocket 2
5.2.17 L32 Clutch - CCO Hem Bar Not Shown Not Shown N/A 3
5.2.18 L32 Clutch - CCO Hem Bar Not Shown Not Shown N/A 4
5.2.19 L32 Clutch - CCO Hem Bar Not Shown Not Shown Extension Bracket(for oversized rolls) 5
5.2.20 L40 & L40 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 6
5.2.21 L40 & L40 PLUSSpring Assist Hem Bar Not Shown Not Shown N/A 7
5.2.1A L40 Clutch - CCO Hem Bar Not Shown Not Shown Hem Bar & Hem Pocket 8
5.2.22 L40 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 9
5.2.23 L45 & L45 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 10
5.2.24 L45 & L45 PLUS Spring Assist Hem Bar Not Shown Not Shown N/A 11
5.2.25 L45 Clutch - CCO Hem Bar Not Shown Not Shown N/A 12
5.2.26 L45 PLUS Clutch - CCO Hem Bar Not Shown Not Shown N/A 13
5.2.28 SL10 Clutch - CCO Hem Bar 3x3 Snap-on Fascia Not Shown SL10 Clutch with 3x3 Snap-on Fascia 14
5.2.2A L32 and L40 Clutch - CCO Hem Bar L-System Fascia (3x3) Not ShownL32 and L40 Clutch with L-System Fascia (3x3) 15
5.2.29 SL10 Clutch - CCO Not Shown 4040 Fascia Not Shown N/A 16
5.2.3A L40 Clutch - CCO Not Shown 4040 Fascia Not Shown N/A 17
5.2.30 SL10 Clutch - CCO Not Shown 4045 Headbox Not Shown N/A 18
5.2.4A L40 Clutch - CCO Not Shown 4045 Headbox Not Shown N/A 19
5.2.31 SL10 Clutch - CCO Not Shown 5050 Headbox Not Shown N/A 20
5.2.5A L40 Clutch - CCO Not Shown 5050 Headbox Not Shown N/A 21
5.2.32 SL20 Clutch - CCO Hem Pocket 4045 Headbox One-piece Side & Sill ChannelsDarkroom Assembly, Inside Mount 22
5.2.6A L40 Clutch - CCO Hem Pocket 4045 Headbox One-piece Side & Sill ChannelsDarkroom Assembly, Inside Mount 23
5.2.33 L40 Clutch - CCO Lift Rail 4040 Fascia, Top & Bottom Not ShownTop Down Rollstar(4040 Fascia on Top & Bottom) 24
5.2.34 L40 Clutch - CCO Lift Rail Fabric Valance Top Not Shown Top Down Rollstar(4045 Headbox on Bottom) 25
5.2.35 SL10 Clutch - CCO A. Wrapped Hem Bar B. Hem Pocket Not Shown Not ShownCorner Application(Regular & Reverse Roll) 26
5.2.8A L40 Clutch - CCO A. Wrapped Hem Bar B. Hem Pocket Not Shown Not ShownCorner Application(Regular & Reverse Roll) 27
Table of Contents[ROLLSTAR SPECIFICATION SHEETS]
Photo (front cover) courtesy of Mermet USA, Inc.
-
Castec Solar Solutions | ROLLSTAR | page iiiCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
INDEX NO. LIFTING SYSTEM HEM STYLE VALANCE LIGHT CONTROL OPTION ASSEMBLY OPTION PAGE NO.
5.2.36 SL10 Clutch - CCO Hem Pocket 5050 Headbox Not Shown 2-CCO SL10 shades (Mounted in one Headbox) 28
5.2.9A L32 Clutch (shown) or L40 Clutch - CCO Hem Pocket 5050 Headbox Not Shown2-CCO shades (Mounted in one Headbox) 29
5.2.15 Duo Link - CCO Hem Bar N/A Not Shown Duo Link (with common center support bracket) 30
5.2.16 Multi Link - CCO Hem Bar N/A Not Shown Multi Link (with shared single control mechanism) 31
5.2.37 SL30 Clutch - CCO Hem Pocket Not Shown Not Shown SL30 Clutch with Spring Assist 32
5.2.38 SL30 Clutch - CCO Not Shown 5050 Headbox Not Shown N/A 33
5.2.11A L40 Clutch - CCO Not Shown 5050 Headbox Not Shown N/A 34
5.2.12 Clutch - CCO Hem Bar Small Cassette Not Shown N/A 35
5.2.13 Clutch - CCO Hem Bar Large Cassette Not Shown N/A 36
5.2.39 SL15 or SL20 Clutch - CCO Exposed Hem Bar 4x4 Snap-on Fascia Side Channel Blackout System 37
5.2.14A L40, L40 PLUS & L45 Clutch - CCOExposed Hem Bar with Light Control Brush L-System Fascia (3x3) Side Channel Blackout System 38
5.4.5 Spring Roller Not Shown Small Cassette Not Shown N/A 39
5.4.6 Spring Roller Not Shown Large Cassette Not Shown N/A 40
5.4.7 Standard Cordless with Rail System Hem Bar N/A N/A Hem Bar & Hem Pocket 41
5.5.17 Series 400 Motor,Battery & ST30 Motor Hem Bar Not Shown Not Shown Standard 42
5.5.18 Series 500 Motor Hem Bar Not Shown Not Shown Standard 43
5.5.19 Series 400 Motor,Battery & ST30 Motor Not Shown 4040 Fascia Not Shown N/A 44
5.5.20 Series 400 Motor,Battery & ST30 Motor Not Shown 4045 Headbox Not Shown N/A 45
5.5.21 Series 500 Motor Not Shown 5050 Headbox Not Shown N/A 46
5.5.22 Series 500 Motor Hem Pocket 5050 Headbox One-piece Side ChannelDarkroom assembly, Inside Mount 47
5.5.23 Series 400 Motor,Battery & ST30 Motor Lift Rail Fabric Valance Top Not Shown Top Down Rollstar 48
5.5.24 Series 400 Motor,Battery & ST30 Motor Hem Pocket 5050 Headbox Not Shown2 Motorized Shades (Mounted in one Headbox) 49
5.5.25 Series 400 Motor,Battery & ST30 Motor Hem Bar 4045 HeadboxOne-piece Side Channel
Darkroom Assembly, Inside Mount 50
5.5.26 Series 500 Motor Exposed Hem Bar with Light Control Brush 4x4 Snap-on Fascia Side Channel Blackout System 51
5.5.27 Series 500 AC Motor Hem Pocket 4x4 Snap-on Fascia Not Shown Coupler System (With 4 x 4 Fascia Bracket) 52
5.5.28 Series 500 DC Motor Hem Pocket 4x4 Snap-on Fascia Not Shown Coupler System (With 4 x 4 Fascia Bracket) 53
5.5.29 Series 500 Motor Hem Pocket Not Shown Not Shown N/A 54
5.5.14 ST30 & Series 400 Motor Not Shown Large Cassette Not Shown N/A 55
Table of Contents[ROLLSTAR SPECIFICATION SHEETS]
-
Castec Solar Solutions | ROLLSTAR | page ivCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
INDEX NO. LIFTING SYSTEM HEM STYLE VALANCE LIGHT CONTROL OPTION ASSEMBLY OPTION PAGE NO.
5.5.30 Series 500 AC Motor Hem Pocket Not Shown Not Shown AC Motor Coupler System 56
5.5.31 Series 500 DC Motor Hem Pocket Not Shown Not Shown DC Motor Coupler System 57
5.5.32 2 Shades on 1 Bracket Hem Bar N/A Not Shown L-System Duo Bracket 58
5.6.1 Not Shown Not Shown Custom Pockets Not Shown N/A 59
5.6.1A Not Shown Not Shown 5555 & 7090 Headboxes Not Shown N/A 60
5.6.2 Not Shown Hem Pocket Not Shown One-piece Side ChannelOne-piece Side Channel 61
5.6.12 ClutchesSL Series - CCO Not Shown N/A N/AComparison of various Clutch sizes 62
5.6.13 BracketsSL Series Not Shown N/A N/AComparison of various Bracket sizes 63
5.6.3A ClutchesL Series - CCO Not Shown N/A N/AComparison of various Clutch sizes 64
5.6.3B Clutches L PLUS Series - CCO Not Shown N/A N/AComparison of various Clutch sizes 65
5.6.20 Brackets - Double Vertical Slim Series Not Shown N/A N/A Duo Shades 66
5.6.21 Brackets - Universal Double Series Not Shown N/A N/A Duo Shades 67
5.6.14 Motorized,Duo Shade Not Shown Not Shown Not ShownClosure & Closure Hanger 68
5.6.15 Motorized ACDuo Shade Bracket Not Shown Not Shown Not Shown Duo Shades 69
5.6.16 Motorized DCDuo Shade Bracket Not Shown Not Shown Not Shown Duo Shades 70
5.6.17 N/A N/A N/A N/A Rollstar Tube Sizes(Description & Application-p1/3) 71
5.6.17 cont. N/A N/A N/A N/A
Rollstar Tube Sizes(Description & Application-p2/3) 72
5.6.17 cont. N/A N/A N/A N/A
Rollstar Tube Sizes(Description & Application-p3/3) 73
5.6.18 N/A N/A Complete Collection N/A Rollstar Valances Collection (p1/2) 74
5.6.18 cont. N/A N/A Complete Collection N/A
Rollstar Valances Collection (p2/2) 75
5.6.19 N/A N/A Complete Collection N/A Tube/Valance Matrix - SL/Automate/Somfy Systems 76
5.6.19 cont. N/A N/A Complete Collection N/A
Tube/Valance Matrix - SL/Automate/Somfy Systems 77
5.6.19 cont. N/A N/A Complete Collection N/A
Tube/Valance Matrix - L-Systems 78
5.6.9 Rollstar-EX Hem Pocket Headbox Not Shown Floor or Wall Mount Systems 79
5.6.10 Rollstar-EX (Cable, Parts & Hem Bar Assembly)Covered Hem Pocket or Exposed Hem Bar N/A N/A
Floor or Wall Mount Systems 80
5.6.11 N/A N/A Rollstar-EX Systems N/A Rollstar-EX Tube Sizes(Description & Application) 81
Table of Contents[ROLLSTAR SPECIFICATION SHEETS]
Understanding our Specification Sheets Numbering System ...................................................................................................v
-
Castec Solar Solutions | ROLLSTAR | page vCSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
SPECIFICATION SHEETS REFERENCE SYSTEM
SHADE STYLESThe first number refers to our SHADE STYLE.
3 = Sunstar Shade4 = Curvilinear Trackstar5 = Rollstar Shade 6 = Skystar (Skylight) Shade 7 = Sloped or Horizontal Trackstar
LIFTING SYSTEMSThe second number refers to our LIFTING SYSTEM.
1 = Cord and Cleat2 = Continuous Chain Operator (CCO) & Slide Winder3 = Wand Operator4 = Spring Roller5 = Motorization6 = Miscellaneous
The last number is a SEQUENTIAL NUMBER in this series.
1 through 99 = Sequential Numbers
Index No. 5.2.27
The last number is a SEQUENTIAL NUMBER in this series.27 = Sequential Number
The first number refers to our SHADE STYLE.5 = Rollstar Shade
The second number is our LIFTING SYSTEM.2 = Continuous Chain Operator (CCO)
UNDERSTANDING OUR SPECIFICATION SHEETSNUMBERING SYSTEM
Every Specification page has an Index Number on the top right hand corner below the Shade Style.The illustration below explains our numbering system, and the chart below shows our naming systems for our Specification Sheets.
The above example means the illustration is a ROLLSTAR SHADE with a CONTINUOUS CHAIN LIFTING SYSTEM.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 1CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Cord & Cleat with Spring TensionHEM STYLE• Lift Rail, Round Hem BarTOP TREATMENT• Fabric Valance Top, optionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar 4040 Fascia (shown on bottom only)
Index No. 5.1.1
FRONT VIEW(Room side)
CLOSE-UP VIEW(Cord & Pulley)
Shade
Tube/Cloth Roll
Lifting Cord
Cord Cleat
Cord Tassel
Lift Rail, Round Hem Bar,optional
4040Fascia
Spring Roller
Bracket
Pulley (hidden)Pulley
2¹⁄₂” Pulley Rail
Valance, optional(front shown transparent
for clarity)
Brackets can be installed directly on the sill or window frame
Note: Standard Lift Rail provided unless otherwise specified.Round Hem Bar shown in illustration is an optional item.
FRONT VIEW(Open Hem)
CLOSE-UP SIDE VIEW(Open Hem is unsealed)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 2CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL20 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.27
2¹⁄₄”
2⁵⁄₈”
The clutch lifting system can be used with all shades up to 16 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.
Round Hem Bar,optional
3¹⁄₂”
1¹⁄₂”
Chain
Holddown
Holddown
Hem Pocket
Hem Bar
Shade
Chain
SL20 Clutch
Tube
Bracket
Chain Connector
Round Hem Bar, optional
FRONT VIEW(Room side)
FRONT OF SHADE
(Room side - installed on wall)
SIDE VIEW
A: OPEN HEM POCKET
Bracket to Bracket(¹⁄₈” less than tight opening)
⁵⁄₈” each side
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 3CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.17
Chain
Holddown
Idler
Bracket(Idler end) Bracket Cover,
optional
Bracket (CCO end)
Clutch
Bracket Cover,optional
Shade
FRONT VIEW(Room side)
Tube
Round Hem Bar, optional
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 4CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.18Bracket to Bracket(¹⁄₈” less than tight opening)
2¹⁄₂”
1⁷⁄₈”2¹⁄₂”
1¹⁄₂”
This clutch lifting system can be used with all shades up to 8 lbs.
Larger clutches are available which will accommodate shades up to 24 lbs.
Holddown
Chain
³⁄₈”
Round Hem Bar, optional
Holddown
L32 Clutch Bracket
Chain
Shade
Round Hem Bar, optional
2¹⁄₂” 1⁷⁄₈”
SIDE VIEWS
FRONT OF SHADE(Room side - installed inside window opening)
Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 5CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Extension Bracket for oversized rolls• Round Hem Bar, optional
Index No. 5.2.19
2¹⁄₈” 3³⁄₄”
This clutch lifting system can be used with all shades up to 8 lbs.
Larger clutches are available which will accommodate shades up to 24 lbs.
Holddown
Chain
Round Hem Bar, optional
Holddown
L32 Clutch Extension Bracket
Chain
Shade
Round Hem Bar, optional
3³⁄₄”2¹⁄₈”
SIDE VIEWS
Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.
Bracket to Bracket(¹⁄₈” less than tight opening)
3³⁄₄”2³⁄₄”
³⁄₈”
FRONT OF SHADE(Room side - installed inside window opening)
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 6CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 & L40 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.20
Chain
Holddown
Idler
Bracket (Idler end)Bracket
Cover
Bracket(CCO end)
Clutch
Bracket Cover
Shade
Round Hem Bar, optional
Tube
FRONT VIEW(Room side)
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 7CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 & L40 PLUS Spring AssistHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.21
Chain
Holddown
Idler
Bracket(Idler end) Bracket
Cover
Spring Assist
Tube
Bracket(CCO end)
Clutch
Bracket Cover
Shade
L40 and L40 PLUS Spring AssistRaise and lower large shades effortlessly!
FRONT VIEW(Room side)
Round Hem Bar, optional
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 8CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.1A
2”
2⁷⁄₈”
The clutch lifting system can be used with all shades up to 12 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.
Round Hem Bar,optional
2³⁄₄”
1¹⁄₂”
Chain
Holddown
Holddown
Hem Pocket
Hem Bar
Shade
Chain
L40 Clutch
Bracket
Chain Connector
Round Hem Bar, optional
FRONT VIEW(Room side)
FRONT OF SHADE
(Room side - installed on wall)
SIDE VIEW
A: OPEN HEM POCKET
Bracket to Bracket(¹⁄₈” less than tight opening)
2³⁄₄” 1³⁄₄”
³⁄₈”
Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 9CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.22
This clutch lifting system can be used with all shades up to16 lbs.
Larger clutches are available which will accommodate shades up to 24 lbs.
Holddown
Chain
Round Hem Bar, optional
SIDE VIEWS
Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.
Bracket to Bracket(¹⁄₈” less than tight opening)
3¹⁄₄” 1³⁄₄”
³⁄₈”
2¹⁄₂”3¹⁄₄”3¹⁄₄”
3¹⁄₄”2¹⁄₂”3¹⁄₄”
L40 PLUSClutch Bracket
Chain
Shade
Holddown
Round Hem Bar,optional
FRONT OF SHADE(Room side - installed inside window opening)
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 10CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.23
Chain
Holddown
Idler
Bracket (Idler end)
Bracket Cover
Bracket (CCO end)
Clutch
Bracket Cover
Shade
Round Hem Bar, optional
Tube
FRONT VIEW(Room side)
SHADE STYLE• RollstarLIFTING SYSTEM• L45 & L45 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 11CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.24
Chain
Holddown
Idler
Bracket (Idler end)
Bracket Cover
Spring Assist
Tube
Bracket (CCO end)
Clutch
Bracket Cover
Shade
FRONT VIEW(Room side)
SHADE STYLE• RollstarLIFTING SYSTEM• L45 & L45 PLUS Spring AssistHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Round Hem Bar, optional
L45 and L45 PLUS Spring AssistRaise and lower large shades effortlessly!
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 12CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.25
SHADE STYLE• RollstarLIFTING SYSTEM• L45 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
2¹⁄₂”3¹⁄₄” 3¹⁄₄”
This clutch lifting system can be used with all shades up to 20 lbs.
Larger clutches are available which will accommodate shades up to 24 lbs.
Holddown
Chain
Round Hem Bar, optional
L45Clutch Bracket
Chain
Shade
HolddownRound Hem Bar,optional
3¹⁄₄” 2¹⁄₂”3¹⁄₄”
SIDE VIEWS
Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.
Bracket to Bracket(¹⁄₈” less than tight opening)
3¹⁄₄” 1³⁄₄”
³⁄₈”
FRONT OF SHADE(Room side - installed inside window opening)
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 13CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.26
SHADE STYLE• RollstarLIFTING SYSTEM• L45 PLUS Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
3¹⁄₄”4”
This clutch lifting system can be used with all shades up to 24 lbs.
Holddown
Chain
Round Hem Bar, optional
L45 PLUSClutch Bracket
Chain
Shade
HolddownRound Hem Bar,optional
4” 3¹⁄₄”
SIDE VIEWS
Note: For optional bracket covers, deduct ¹⁄₄” for inside installation.
Bracket to Bracket(¹⁄₈” less than tight opening)
4” 2¹⁄₄”
³⁄₈”
FRONT OF SHADE(Room side - installed inside window opening)
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 14CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• 3x3 Snap-on FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• SL10 Clutch with 3x3 Snap-on Fascia • Round Hem Bar, optional
Index No. 5.2.28
FRONT TOP VIEW(Room side)
Idler Bracket
Clutch BracketClutchShade
Round Hem Bar,optional
3x3 Snap-on Fascia Panel(covers front and part of bottom)
Holddown
Chain
3”
3”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 15CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 and L40 Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• L-System Fascia (3x3)LIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• L40 Clutch with L-System Fascia (3x3) • Round Hem Bar, optional
Index No. 5.2.2A
FRONT TOP VIEW(Room side)
Idler Bracket
End Cap
End Cap
Clutch Bracket
L40 Clutch
Shade
L-System Fascia Panel (3x3)(covers front and part of bottom)
Holddown
Chain
3¹⁄₄”
3³⁄₄”
Round Hem Bar,optional
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
Shade roll hidden from front, top and
bottom views
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 16CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.29
SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
SL10 Clutch
End Cap(optional)
4040 Fascia design provides dust cover protection for shade
Removable Shelf (optional - hides roll)
Shade
Shade roll hidden from front, top and
bottom views
4040 Fascia
4040 Fascia
4”
2¹⁄₂”
4”
Bracket
BACK VIEW(window side)
Chain
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 17CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.3A
SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
End Cap(optional)
4040 Fascia design provides dust cover protection for shade
Removable Shelf (optional - hides roll)
Shade
Shade roll hidden from front, top and
bottom views
4040 Fascia
Rivet(s)
4040 Fascia
4”
2¹⁄₂”
4”
Bracket
BACK VIEW(window side)
Chain
Clutch
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 18CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT•4045 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.2.30
Bracket
SL10 Clutch
End Cap(optional)
4045 Headbox design provides dust cover protection for shade
Removable Shelf (optional - hides roll)
Shade
Shade roll hidden from front, top, back and
bottom views
BACK VIEW(window side)
4045 Headbox
4045 Headbox
4¹⁄₂”
2¹⁄₂”
4”
Chain
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 19CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.2.4A
Bracket
End Cap(optional)
4045 Headbox design provides dust cover protection for shade
Removable Shelf (optional - hides roll)
Shade
Shade roll hidden from front, top, back and
bottom views
BACK VIEW(window side)
4045 Headbox
Rivet(s)
4045 Headbox
4¹⁄₂”
2¹⁄₂”
4”
Chain
Clutch
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 20CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.31
SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Bracket
Nuts & Bolts
SL10 Clutch
End Cap(optional)
5050 Headbox design provides dust cover protection for shade
Removable Shelf (optional - hides roll)
Shade
Shade roll hidden from front, top, back and
bottom views
BACK VIEW(window side)
5050 Headbox
5050 Headbox
5”
2⁷⁄₈”
4³⁄₄”
Chain
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 21CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.5A
SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Bracket
Rivet(s)
End Cap(optional)
5050 Headbox design provides dust cover protection for shade
Removable Shelf (optional - hides roll)
Shade
Clutch
Shade roll hidden from front, top, back and
bottom views
BACK VIEW(window side)
5050 Headbox
5050 Headbox
5”
2⁷⁄₈”
4³⁄₄”
Chain
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 22CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL20 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• One-piece Side Channel• One-piece Sill ChannelASSEMBLY OPTION• Darkroom Assembly, Inside Mount
Index No. 5.2.32Bracket to Bracket
(¹⁄₈” less than tight opening)
Sill ChannelScrewScrew
3³⁄₄”
2¹⁄₂”
4¹⁄₂”
Chain
Chain
Shade
Screw holes (2)
Bottom HemHem BarBottom Channel
Holddown
Holddown
AA
4045 Headbox(removed for clarity)
Screw(s)
Bottom Shelf
The clutch lifting system can be used with all shades up to 16 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.FRONT VIEW
(Room side)
TOP VIEW(Section A - A)
SIDE VIEW
¹⁄₂”
2¹⁄₂”
2¹⁄₂”
4”
2¹⁄₄”2⁵⁄₈”
1”
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 23CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• One-piece Side Channel• One-piece Sill ChannelASSEMBLY OPTION• Darkroom Assembly, Inside Mount
Index No. 5.2.6ABracket to Bracket
(¹⁄₈” less than tight opening)
Sill ChannelScrewScrew
4¹⁄₂”
4¹⁄₂”
Chain
Chain
Shade
Screw holes (2)
Bottom HemHem BarBottom Channel
Holddown
Holddown
AA
4045 Headbox(removed for clarity)
Screw(s)
Bottom Shelf
The clutch lifting system can be used with all shades up to 16 lbs.A larger clutch is available which will accomodate shades up to 24 lbs.FRONT VIEW
(Room side)
TOP VIEW(Section A - A)
SIDE VIEW
2¹⁄₂”
4”
2”2⁷⁄₈”
1”
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
2¹⁄₂”
¹⁄₂”
2¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 24CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Lift Rail, Round Hem BarTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar 4040 Fascia (shown on both top and bottom)
Index No. 5.2.33
4040 Fascia(front shown transparent
for clarity)
Shade
Tube/Cloth Roll
Chain
Lifting Cord
Holddown
4040 Fascia, optional
Bracket
Headrail
Rivet(s)
Spring Roller
Bracket
Brackets can be installed directly on the sill or window frame
Clutch
FRONT VIEW(Room side)
Note: Standard Lift Rail provided unless otherwise specified.Round Hem Bar shown in illustration is an optional item.
FRONT VIEW(Open Hem)
CLOSE-UP SIDE VIEW(Open Hem is unsealed)
Lift Rail, Round Hem Bar,optional
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 25CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Lift Rail, Wrapped Round Hem BarTOP TREATMENT• Fabric Valance Top, optionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar 4045 Headbox (shown on bottom only)
Index No. 5.2.34
Shade
Tube/Cloth Roll
Chain
Lifting Cord
Holddown
4045 Headbox, optional
Brackets can be installed directly on the sill or window frame
Bracket
Valance, optional(front shown transparent
for clarity)
Spring Roller
Bracket
Headrail
Clutch
Lift Rail,Wrapped Round Hem Bar,optional
FRONT VIEW(Room side)
Note: Standard Lift Rail provided unless otherwise specified.Round Hem Bar shown in illustration is an optional item.
FRONT VIEW(Open Hem)
CLOSE-UP SIDE VIEW(Open Hem is unsealed)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 26CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• A - Wrapped Round Hem Bar• B - Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTIONCorner Application• A - Regular Roll• B - Reverse Roll
Index No. 5.2.35
FRONT VIEW(Room side)
FRONT VIEW(Room side)
Chain
Round Hem Bars(optional)
A: REGULAR ROLL – Larger gap between shade cloths
Hem Pockets(standard)
B: REVERSE ROLL – Minimizes gap between shade cloths
Chain
Holddown
Holddown
A
B
Holddown
Holddown
Chain Chain
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 27CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.2.8A
FRONT VIEW(Room side)
FRONT VIEW(Room side)
ChainChain
Holddown
Holddown
A
B
Holddown
Holddown
Chain Chain
SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• A - Wrapped Round Hem Bar• B - Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTIONCorner Application• A - Regular Roll• B - Reverse Roll
Round Hem Bars(optional)
A: REGULAR ROLL – Larger gap between shade cloths
Hem Pockets(standard)
B: REVERSE ROLL – Minimizes gap between shade cloths
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 28CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL10 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Two CCO SL10 Shades mounted in one Headbox
Index No. 5.2.36
IdlerClutch
5”
4³⁄₄”Bracket
Rivet(s)
End Cap, optional
Screw(s)
Screw(s)
Privacy Shade (Regular Roll)
5050 Headbox
Rivet(s)
Holddown
Holddown
Chain
Chain
Solar Screen Shade (Reverse Roll)Hem Pocket
FRONT VIEW(Room side)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 29CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 Clutch (shown) or L40 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Two CCO Shades mounted in one Headbox
Index No. 5.2.9A
5”
4³⁄₄”Bracket
Idler End
Rivet(s)
End Cap, optional
Screw(s)
Screw(s)
Privacy Shade (Regular Roll)
5050 Headbox
Rivet(s)
Holddown
Holddown
Chain
Chain
Solar Screen Shade (Reverse Roll)Hem Pocket
Clutch
FRONT VIEW(Room side)
NOTE:
1) Closure shelf not available with this application.
2) Shade height is limited due to roll size.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 30CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Duo Link - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• OptionalLIGHT CONTROL CHANNEL• Not ShownASSEMBLY OPTION• Duo Link operation with common center support bracket• Round Hem Bar, optional
Index No. 5.2.15
DUO LINK OPERATION(Systems 40 & 40 PLUS/and Systems 45 & 45 PLUS allows two shades to have fully independent operation
whilst sharing a common center support bracket.)
Common center support bracket(Light gap between shades is ³⁄₈”)
Window
Door
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 31CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Multi Link - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• OptionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Multi Link operation with shared single control mechanism• Round Hem Bar, optional
Index No. 5.2.16
.
MULTI LINK OPERATION(System 40 & 40 PLUS/and Systems 45 & 45 PLUS allows multiple shades to be joined together with a
shared single control mechanism.)
Window(s)
Common center support brackets(Light gap between shades is ³⁄₈”)
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
1¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 32CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30 Clutch - Continuous Chain OperatorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• SL30 Clutch with Spring Assist Mechanism
Index No. 5.2.37
Bracket Cover
Bracket
Bracket
Bracket Cover
Internal Drive Wheel
Spring Assist Mechanism (above) located inside Shade Tube (below)
Crown Wheel
Spring Assist Mechansim
Shade Tube
Collapsible Idler
Shade
FRONT VIEW(Room side)
Holddown
Clutch
Chain
Hem Bar
SPRING ASSIST MECHANISM WITH A SL30 CLUTCH Ideal for very heavy shades
(drawing not to scale)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 33CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.2.38
Chain
Holddown
Screw
Holddown
Chain
³⁄₈”
2¹⁄₄”
4³⁄₄”
2⁵⁄₈”
5”
Optional End Cap
Optional - Closure Hanger(drawing not to scale)
(sold separately)
END VIEW(Shown without end cover)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 34CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.2.11A
Holddown Screw
Holddown
Chain
³⁄₄”
2”
4³⁄₄”
2⁵⁄₈”
5”
Chain
Optional - Closure Hanger(drawing not to scale)
(sold separately)
END VIEW(Shown without end cover)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 35CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Small CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.12
Clutch
Bracket location
Small Cassette Fascia
Note: Fascia can be fabric-wrapped for added decorative touch.
Shade
Holddown
Dust Cover
MountingBracket(s)
Brackets (brackets are affixed to end caps)
ChainRound Hem Bar, optional
FRONT TOP VIEW(Room side)
Note: Cassettes are fully assembled at factory with shade, brackets and end caps attached to fascia and dust cover. Complete unit is easily snapped into the mounting brackets during installation.
End Cap
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 36CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Clutch - Continuous Chain OperatorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Large CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.2.13
Clutch
Bracket location
End Cap
Large Cassette Fascia
Note: Fascia can be fabric-wrapped for added decorative touch.
Shade
Holddown
Dust Cover
Brackets (brackets are affixed to end caps)
ChainRound Hem Bar, optional
FRONT TOP VIEW(Room side)
Note: Cassettes are fully assembled at factory with shade, brackets and end caps attached to fascia and dust cover. Complete unit is easily snapped into the mounting brackets during installation.
MountingBracket(s)
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 37CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL15 or SL20 Clutch - Continuous Chain OperatorHEM STYLE• Exposed Hem BarTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Side ChannelASSEMBLY OPTION--------------------------
Index No. 5.2.39
Fascia Bracket
End Cap
Side Channel
Side Channel
Hem Bar Cap
Clutch
Exposed Hem Bar
Shade
Fascia panel
Clutch Bracket
End Cap
Idler
Tube
Holddown
CLOSE-UP VIEW(Exposed Hem Bar and End Cap)
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 38CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L40, L40 PLUS & L45 Clutch - Continuous Chain OperatorHEM STYLE• Exposed Hem Bar with Light Control BrushTOP TREATMENT• L-System Fascia (3x3)LIGHT CONTROL CHANNEL• Side ChannelASSEMBLY OPTION--------------------------
Index No. 5.2.14A
Fascia Bracket
End Cap
Side Channel
Side ChannelHem Bar Cap
Clutch
Shade
L-System Fascia Panel (3x3)
Clutch Bracket
End Cap
Idler
Tube
Holddown
CLOSE-UP VIEW(Exposed Hem Bar with LIght Control Brush and End Cap)
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
Exposed Hem Bar with Light Control Brush
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 39CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Spring RollerHEM STYLE• Not shownTOP TREATMENT• Small CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.4.5
Spring Roller
End Cap
Fascia
Note: Fascia can be fabric-wrapped for added decorative touch.
Note: Cassettes are fully assembled at factory with shade, brackets and end caps attached to fascia and dust cover. Complete unit is easily snapped into the mounting brackets during installation.
Shade
Dust Cover
FRONT VIEW(Room side)
Bracket location(bracket affixed to end cap)
3¹⁄₈”
2¹⁄₂”
⁷⁄₈”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 40CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Spring RollerHEM STYLE• Not shownTOP TREATMENT• Large CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.4.6
Spring Roller
End Cap
Fascia
Note: Fascia can be fabric-wrapped for added decorative touch.
Note: Cassettes are fully assembled at factory with shade, brackets and end caps attached to fascia and dust cover. Complete unit is easily snapped into the mounting brackets during installation.
Shade
Dust Cover
FRONT VIEW(Room side)
Bracket location(bracket affixed to end cap)
3¹⁄₈”
1¹⁄₄”
3³⁄₈”
-
.
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 41CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.4.7
SHADE STYLE• RollstarLIFTING SYSTEM• Standard Cordless with Rail SystemHEM STYLE• A. Open Hem PocketTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Round Hem Bar, optional
1¹⁄₂”
Hem Pocket
Hem Bar
A: OPEN HEM POCKET
Shade, regular roll
Shade, regular roll
Shade, reverse roll
Shade, reverse roll
Round Hem Bar, optional
L-bracket(for wall mountinstallations)
L-bracket(side view)
Round Hem Bar, optional
Clip bracket(s)
Shade bracket
Shade bracket
CEILING MOUNT STANDARD CORDLESS
WITH RAIL SYSTEM SHADE(showing regular roll and
reverse roll options)
WALL MOUNT STANDARD CORDLESS WITH
RAIL SYSTEM SHADE(showing regular roll and reverse roll options)
3”
1⁷⁄₁₆”
1⁷⁄₈”
2¹⁄₄”
1³⁄₄”
1³⁄₄”
3”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 42
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.5.17
2¹⁄₂”
The motor lifting system can be used with all shades up to 35lbs.
Round Hem Bar, optional
Round Hem Bar,optional
Detail of Endcap
⁷⁄₈” each side ⁵⁄₈” each side
ShadeShade
SL Bracket
Motor
Motor Cord
Motor Cord
FRONT VIEW(Room side)
Bracket to Bracket(¹⁄₈” less than tight opening)
2”2⁷⁄₈”
1¹⁄₂”Hem Pocket
Hem Bar
A: OPEN HEM POCKET
CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 43CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• A: Open Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Round Hem Bar, optional
Index No. 5.5.18
Bracket to Bracket(¹⁄₈” less than tight opening)
3¹⁄₈”1³⁄₈”
4”
Round Hem Bar,optional
Round Hem Bar,optional
Round Hem Bar, optional
Endcap
Detail of Endcap
Shade
Shade
Bracket
Idler
Motor
Motor tube
FRONT VIEW(Room side)
1¹⁄₂”Hem Pocket
Hem Bar
A: OPEN HEM POCKET
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 44CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Not shownTOP TREATMENT• 4040 FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.5.19
Motor Adapter Plate
End Cap(optional)
Shade
Shade roll hidden from front, top and
bottom views
Motor Head
4040 Headbox
Rivet(s)Bracket
4040 Headbox
Removable shelf hides roll(optional)
Fascia design provides dust coverprotection for shade.
4”
4”
2¹⁄₂”
BACK VIEW(Window side)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 45CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Not shownTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.5.20
Motor Adapter Plate
End Cap(optional)
Shade
Groove for bracket
4045 Headbox
Bracket
BACK VIEW(Window side, for REGULAR ROLL)
BACK VIEW(Window side, for REGULAR ROLL)
4045 Headbox
Headbox design provides dust cover protection for shade.Note: The 4045 shelf can be turned to accomodate a REVERSE ROLL.
Removable shelf hides roll
4¹⁄₂”
4¹⁄₂”
¹³⁄₁₆”
4”
2¹⁄₂”
Motor Head
Rivet(s)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 46CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• Not shownTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.5.21
Motor
Retaining Clip
Motor Cord
End Cap(optional)
Shade
Shade roll hidden from front, top and
bottom views
5050 Headbox
Bracket (removed for clarity)
BACK VIEW(Window side, for REGULAR ROLL)
BACK VIEW(Window side)
5050 Headbox
Headbox design provides dust cover protection for shade.
Removable shelf hides roll
5”
4³⁄₄”
2⁷⁄₈”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 47CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• One-piece side channelASSEMBLY OPTION• Darkroom assembly, Inside mount
Index No. 5.5.22Bracket to Bracket
(¹⁄₈” less than tight opening)
2¹⁄₂” 1”
5”
Sill Channel
Optional End Cap( Removed for Clarity)
Bottom Hem
Bottom ChannelHem Bar
Shade
Bracket
5050 HeadboxRemoved for Clarity
One PieceSide Channel
One PieceSide Channel
Bracket
5050 Headbox
Motor Tube
Bottom Shelf
IdlerMotor
FRONT VIEW(room side)
TOP VIEW
SIDE VIEW
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
2¹⁄₂”
¹⁄₂”
2¹⁄₂”
1³⁄₈”
4¹⁄₂”
3¹⁄₈”
5”
-
.
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 48CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Lift Rail, Round Hem BarTOP TREATMENT• Fabric Valance Top, OptionalLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Top-Down Rollstar
Index No. 5.5.23
Valance, optional (front shown transparent
for clarity)
Shade
Tube/Cloth Roll
Motor Cord
Motor Head
Lifting Cord
Lift Rail, Round Hem Bar,optional
Motor Adapter Plate
Bracket
FRONT VIEW(Room side)
Headrail
Spring Roller
Sill Rail, optional
Bracket
Brackets can be installed directly on the sill or window frame
Note: Standard Lift Rail provided unless otherwise specified.Round Hem Bar shown in illustration is an optional item.
FRONT VIEW(Open Hem)
CLOSE-UP SIDE VIEW(Open Hem is unsealed)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 49
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Hem PocketTOP TREATMENT• 5050 HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Two Motorized Shades mounted in one Headbox
Index No. 5.5.24
Motor
5”
4³⁄₄”BracketIdler End
Rivet(s)
End Cap, optional
Screw(s)
Screw(s)
Privacy Shade (Regular Roll)
5050 Headbox
Motor Cord
Solar Screen Shade (Reverse Roll)
Hem Pocket
FRONT VIEW(Room side)
NOTE:
1) Closure shelf not available with this application.
2) Shade height is limited due to roll size.
CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 50CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.5.25Bracket to Bracket
(¹⁄₈” less than tight opening)
2¹⁄₂”
¹⁄₂”
4¹⁄₂”
2¹⁄₄”
4”
Sill Channel
Optional End Cap(removed for clarity)
Bottom ChannelHem BarBottom Hem
Shade
Bracket
Bracket4045 Headbox
Motor Tube
Bottom Shelf
Idler
Motor
Motor Cord
SIDE VIEW
FRONT VIEW(Window side)
4045 HeadboxRemoved for Clarity
TOP VIEW
1”
SHADE STYLE• RollstarLIFTING SYSTEM• Series 400 Motor• Battery & ST30 MotorHEM STYLE• Hem BarTOP TREATMENT• 4045 HeadboxLIGHT CONTROL CHANNEL• One-piece side channelASSEMBLY OPTION• Darkroom assembly, inside mount
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
2¹⁄₂”
¹⁄₂”
2¹⁄₂”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 51CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 MotorHEM STYLE• Exposed Hem Bar with Light Control BrushTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Side ChannelASSEMBLY OPTION• Blackout system
Index No. 5.5.26
Fascia Bracket
End Cap
Side Channel
Side Channel
Exposed Hem Bar with Light Control Brush
Hem Bar Cap
Motor
Shade
4x4 Snap-On Fascia
Motor Bracket
Motor Cord
End Cap
CollapsibleIdler
Tube
Drive
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 52CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 AC MotorHEM STYLE• Hem PocketTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• AC Motor-Coupler System with 4x4 Fascia Bracket
Index No. 5.5.27
Fascia Motor
Bracket Motor
Motor
End Cap
Drive
Collapsible Idler
Collapsible Coupler(see details below)
4x4 Snap-on Fascia sized to cover both shades seamlessly
Intermediate 4x4 Fascia Bracket
Fascia Idler Bracket
Tube
Hem Bar
Hem Pocket
Hem Bar
CLOSE-UP VIEW(Collapsible Coupler +
Intermediate Fascia Bracket)
HemPocket
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 53CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 DC MotorHEM STYLE• Hem PocketTOP TREATMENT• 4x4 Snap-on FasciaLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• DC Motor-Coupler System with 4x4 Fascia Bracket
Index No. 5.5.28
Fascia Motor
Bracket Motor
Motor
End Cap
Drive
Collapsible Idler
Collapsible Coupler(see details below)
4x4 Snap-on Fascia sized to cover both shades seamlessly
Intermediate 4x4 Fascia Bracket
Fascia Idler Bracket
Tube
Hem Bar
Hem Bar
CLOSE-UP VIEW(Collapsible Coupler +
Intermediate Fascia Bracket)
Hem Pocket
HemPocket
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 54CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Rollstar Open RollLIFTING SYSTEM• Series 500 MotorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.5.29
Motor Bracket
Tube
Motor
Motor
Drive
Collapsible Idler
Idler Bracket
Hem Pocket
Hem Bar
Shade
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 55CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series ST30 & Series 400 MotorsHEM STYLE• Not shownTOP TREATMENT• Large CassetteLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.5.14
End Cap
Fascia
Battery Pack for Motor (Motor is housed inside
of roller tube)
Note: Fascia can be fabric-wrapped for added decorative touch.
Note: Cassettes are fully assembled at factory with shade, brackets and end caps attached to fascia and dust cover. Complete unit is easily snapped into the mounting brackets during installation.
Shade
Dust Cover
FRONT VIEW(Room side)
Bracket location(bracket affixed to end cap)
3¹⁄₂”
1¹⁄₄”
3³⁄₈”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 56CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 AC MotorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• AC Motor-Coupler System
Index No. 5.5.30
Retainer Clip
Motor
AC MotorAC Motor Bracket
Drive
Idler
Collapsible Coupler(see details below)
Intermediate Coupler Bracket
Idler Bracket
Tube
Hem Bar
Hem Bar
Hem Pocket
Hem Pocket
CLOSE-UP VIEW(Collapsible Coupler +
Intermediate Coupler Bracket)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 57CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Series 500 DC MotorHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• DC Motor-Coupler System
Index No. 5.5.31
Retainer Clip
Motor
Drive
Idler
Collapsible Coupler(see details below)
Intermediate Coupler Bracket
Idler Bracket
Tube
Hem Bar
Hem Bar
Hem Pocket
Hem Pocket
CLOSE-UP VIEWMOTOR END
CLOSE-UP VIEW(Collapsible Coupler +
Intermediate Coupler Bracket)
DC MotorDC Motor Bracket
-
5¹⁄₈”
6¹⁄₂”
⁷⁄₈”
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 58CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Sunstar (front shade)• Rollstar (back shade)LIFTING SYSTEM• 2 shades on 1 bracketHEM STYLE• Hem BarTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• L-System Duo Bracket
Index No. 5.5.32
Bracket
Idler
Back Shade(Rollstar, privacy)
Antenna
Motor Cord
Front Shade, lowered(Sunstar, Solar Screen)
Front Shade, partly raised
Back Shade, lowered
FRONT VIEWS(Room side, looking down from top)
SIDE VIEW
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 59CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Not shownLIFTING SYSTEM• Not shownHEM STYLE• Not shownTOP TREATMENT• Custom PocketsLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.6.1
Welded End Cap (removed for clarity)
Removable Shelf, Optional
Removable Shelf, Optional
Removable Shelf, Optional
Welded End Cap (removed for clarity)
NOTE: Custom Pockets are made of unfinished sheet metal.
Welded End Cap (removed for clarity)
COMPARISON OF CUSTOM POCKET SIZES
6”
7”
8”
up to 4”
up to 5”
up to 5”
6”
7”
8”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 60CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Not shownLIFTING SYSTEM• Not shownHEM STYLE• Not shownTOP TREATMENT• 5555 & 7090 HeadboxesLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• N/A
Index No. 5.6.1A
Removable Shelf
Removable Shelf
5555 & 7090 HEADBOXES
5¹⁄₂”
9”
5¹⁄₂”
7”
3”
3”
End Cap
End Cap
Screw(s)
Screw(s)
Wall Bracket
Wall Bracket
7090 HEADBOX
5555 HEADBOX
FRONT VIEWS(Room side)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 61CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• Not shownHEM STYLE• Hem PocketTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• One-piece side channelASSEMBLY OPTION• One-piece side channel
Index No. 5.6.2
ONE-PIECE SIDE CHANNEL WITH SHADEFRONT VIEW
SIDE CHANNEL DETAIL
2¹⁄₂”1”
Shade
Light Concealing Brush
Shade Hem
Side Channel Side Channel
CHANNEL NOTE: To insure the best possible light blockage, specify the optional flat exposed hem bar (ideally with brush on the bottom channel of the hem bar). This will allow the side channels to have the brush in both the front and back edges of the channel.
If a standard bottom hem pocket is specified, the side channel can only accommodate the brush in either the front edge of the channel or the back edge of the channel. Because the brush can only go on one side, the light seepage will be greater.
Unless otherwise specified, the brush colors will match the channel colors. Available in white, grey and black.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 62CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30, SL20, SL15 & SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various clutch sizes
Index No. 5.6.12
CONTINUOUS CHAIN OPERATION (CCO)SL-CLUTCH SIZES
SL30 Clutch
4¹⁄₄”3”
3¹⁄₂” 2⁵⁄₈” 1⁷⁄₈”2¹⁄₄”
2³⁄₈”2⁵⁄₈”
SL20 Clutch SL10 ClutchSL15 Clutch
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 63CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• SL30, SL20, SL15 & SL10 Clutch - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various bracket sizes
Index No.5.6.13
BRACKETSSL-BRACKET SIZES
SL10, 15 & 20 Brackets SL30 BracketSL10 Bracket
2⁵⁄₈”
1⁵⁄₈”2³⁄₁₆”
2⁷⁄₈”2⁷⁄₈”
3⁵⁄₈”
⁵⁄₈”
⁵⁄₈”
⁵⁄₈”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 64CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Rollstar or SunstarLIFTING SYSTEM• L32, L40, & L45 Clutches - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various clutch sizes
Index No. 5.6.3A
CONTINUOUS CHAIN OPERATION (CCO)L-CLUTCH SIZES
2⁷⁄₈” 2¹⁄₈” 1⁵⁄₈”
2⁷⁄₈” 2¹⁄₈” 1⁵⁄₈”
L40 Clutch L32 ClutchL45 Clutch
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 65CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• RollstarLIFTING SYSTEM• L32 PLUS, L40 PLUS, & L45 PLUS Clutches - Continuous Chain OperatorHEM STYLE• Not shownTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Comparison of various clutch sizes
Index No. 5.6.3B
CONTINUOUS CHAIN OPERATION (CCO)L PLUS-CLUTCH SIZES
3¹⁄₂” 2⁷⁄₈” 1⁵⁄₈”
3¹⁄₂” 2⁷⁄₈” 1⁵⁄₈”
L40 PLUS Clutch L32 PLUS ClutchL45 PLUS Clutch
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 66CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.20
SHADE STYLE• RollstarLIFTING SYSTEM• SL Clutches and Automate MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Duo Shades
DOUBLE VERTICAL SLIM BRACKET& BRACKET COVER
SIDE VIEW
INSIDE FRONT VIEW
ANGLED VIEW
Double Vertical Slim Bracket
Bracket Cover
3”
⁷⁄₈”
4¹⁄₈”
5”
5”
6¹⁄₈”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 67CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.21
SHADE STYLE• RollstarLIFTING SYSTEM• SL Clutches and Automate MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Duo Shades
UNIVERSAL DOUBLE BRACKET& BRACKET COVER
SIDE VIEW
INSIDE FRONT VIEW
ANGLED VIEW
Universal Double Bracket
Bracket Cover
4³⁄₄”
⁷⁄₈”
5³⁄₈”
4³⁄₄”
4³⁄₄”
5³⁄₄”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 68CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Rollstar, Duo ShadeLIFTING SYSTEM• MotorizedHEM STYLE• Not shownTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• With Closure and Closure Hanger
Index No. 5.6.14
3⁷⁄₈”
2 ”
4⁵⁄₈”
5”
3¹⁄₈” 3¹⁄₈”
Shade Bracket
Custom Headbox
Leveling Screw
Leveling Screw Closure Hanger
Closure Shelf
Shade Bracket
CUSTOM HEADBOXApplication A: Shades Stacked
Application B: Shades Side by SideCUSTOM POCKET
SIDE VIEWS
Note: Custom box dimensions are driven by shade size
CLOSURE SHELF/HANGEROptional Stand-Alone closure shelf and closure hanger.
(sold separately for wood valances).Extruded closure shelf will be cut down based on specs.
SHOWN ABOVE: 5” CLOSURE SET.(2¹⁄₂” CLOSURE SET AVAILABLE)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 69CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
SHADE STYLE• Rollstar, Duo ShadeLIFTING SYSTEM• Motorized (AC Motors only)HEM STYLE• Not shownTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Duo Shades
Index No. 5.6.15DOUBLE BRACKETS FOR AC MOTOR(open roll shades)
SIDE VIEW OF BRACKETS
Idler End Motor End
4⁵⁄₈”
7¹⁄₂”7¹⁄₂”
4⁵⁄₈”
1³⁄₄”1³⁄₄”
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 70CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.16
SHADE STYLE• Rollstar, Duo ShadeLIFTING SYSTEM• Motorized (DC Motors only)HEM STYLE• Not shownTOP TREATMENT• Not shownLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Duo Shades
SIDE VIEW OF BRACKETS
Idler End Motor End
7¹⁄₂”7¹⁄₂”
1³⁄₄”1³⁄₄”
4⁵⁄₈” 4⁵⁄₈”
DOUBLE BRACKETS FOR DC MOTOR(open roll shades)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 71CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.17
SHADE STYLE• Rollstar TubesLIFTING SYSTEM• SL-Systems - Continuous Chain Operators and Automate MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
TUBE SIZE/DESCRIPTION
APPLICATIONROLLEASE
Continuous Cord OperatorsROLLEASE
Automate Motors
SL10CCO
SL15CCO
SL20CCO
SL30CCO G200 G400
Spring Assist
Li-ion1.1
Li-ion2.0
Li-ion3.0
Li-ion10.0
1¹⁄₄” with Key Drives •
1¹⁄₂” with Key Drives • • • • •
2” with Key Drives • • • • • •
2¹⁄₂” with Key Drives • • • • • •
3¹⁄₄” with Key Drives • • • •
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 72CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.17 cont.
SHADE STYLE• Rollstar TubesLIFTING SYSTEM• Somfy MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
TUBE SIZE/DESCRIPTION
APPLICATION
SOMFY MOTORS
R28 Battery
Sonesse 30 Wire
Free Li-ion RTS
Battery
DC50 (Ultra Quiet) Series
Sonesse 30 (ST30)
(Quiet) Low
Voltage
Sonesse 30 (ST30)
(Ultra Quiet) Low
Voltage
Sonesse (Quiet)
400 Series
Sonesse (Quiet)
500 Series
Sonesse (Ultra Quiet)
500 Series
1¹⁄₂” with Key Drives • • • •
1¹⁄₂” Groove Tube •
2” Groove Tube •
2” with Key Drives • • • •
2¹⁄₄” with Key Drives • •
2³⁄₈” with Key Drives •
2¹⁄₂” with Key Drives •
3¹⁄₄” with Key Drives •
4” Smooth •
5” Smooth •
5” D-Tube(for heavy shades)
•
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 73CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Rollstar TubesLIFTING SYSTEM• L-Systems - Continuous Chain Operators, Cordless and Somfy MotorsHEM STYLE• N/ATOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
Index No. 5.6.17 cont.
TUBE SIZE/DESCRIPTION
APPLICATION
LOUVOLITE Continuous Cord Operator
Cord-less
SOMFYMotors
L32CCO
L32PLUSCCO
L40CCO
L40PLUSCCO
L45CCO
L45PLUSCCO
Large Spring Assist*
Cord-less Cas-sette
R28Bat-tery
MotorST30Motor
Series400
Motor
Series500
Motor
1¹⁄₄” with Key Drive • •
1¹⁄₂” with 2 Key Drives • • • • • •
1³⁄₄” with 3 Key Drives • • • •
1³⁄₄” with 3 Key Drives(thick wall)
• • •
2¹⁄₈” (thick wall) •
* Spring assist may be desirable in situations where you have multiple or large shades.
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 74CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Rollstar ValancesLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• Complete Collection (page 1 of 2)LIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
Index No. 5.6.18 DESCRIPTION
Dust Cover
Included
Bottom Shelf
Included
End Cap
Included
Back Cover
Included
Reverse Roll
Available Notes
Small Cassette3¹⁄₈”H x 2¹⁄₂”D Yes N/A Yes N/A Yes
Face can be fabric
wrapped
Large Cassette3¹⁄₈”H x 3³⁄₈”D Yes N/A Yes N/A Yes
Face can be fabric
wrapped
Snap-on Fascia3”H x 3”D N/A Yes
Must be specified
Must be specified No
L-System Fascia3x3 Small (Snap-on)3³⁄₄”H x 3³⁄₈”D N/A Yes
Must be specified N/A No
Snap-on Fascia4”H x 4”D
Must be specified Yes
Must be specified
Must be specified No
L-System Fascia4x4 Large (Snap-on)4³⁄₈”H x 4¹⁄₈”D
N/A Yes Must be specified N/A No
4040 Covered Fascia4”H x 4”D Yes
Must be specified
Must be specified N/A
Yes (without Bottom Shelf)
Shadow line on
face and bracket
5” Fascia (Snap-on)5”H x 5”D N/A Yes
Must be specified N/A
Yes(if Fascia is flipped)
Can be used for
small duo shades
7” Fascia (Snap-on)7³⁄₈”H x 5¹⁄₂”W N/A Yes
Must be specified N/A No
Not available
as reverse roll
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 75CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Rollstar ValancesLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• Complete Collection (page 2 of 2)LIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
Index No. 5.6.18 cont. DESCRIPTION
Dust Cover
Included
Bottom Shelf
Included
End Cap
Included
Back Cover
Included
Reverse Roll
Available Notes
4045 Headbox4¹⁄₂”H x 4”D Yes
Must be specified
Must be specified Yes Yes
Groove on back for bracket
5050 Headbox5”H x 4³⁄₄”D Yes
Must be specified
Must be specified Yes Yes
5555 Headbox5¹⁄₂”H x 5¹⁄₂”D Yes Yes
Must be specified Yes Yes
7090 Headbox9”H x 7”D Yes Yes
Must be specified Yes Yes
For very large
shades or two shades
Hanger³⁄₈”W x 2¹⁄₄”HShelf5”W x ⁷⁄₈”H
N/A Yes N/A N/A N/AFor
wood boxes
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 76CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.19.
SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For SL Clutches, Automate and Somfy Motor Systems LIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
1¹⁄₄” Tube
with Key Drives
1¹⁄₂” Tube
with Key Drives
1¹⁄₂” Groove Tube
2”Groove Tube
2” Tube
with Key Drives
2¹⁄₄” Tube
with Key Drives
2³⁄₈” Tube
with Key Drives
2¹⁄₂” Tube
with Key Drives
3¹⁄₄” Tube
with Key Drives
DESCRIPTION
Small Cassette3¹⁄₈”H x 2¹⁄₂”D •
Large Cassette3¹⁄₈”H x 3³⁄₈”D • • •
Snap-on Fascia3”H x 3”D • • •
Snap-on Fascia4”H x 4”D • • • • • • • • •
5” Fascia Panel(Snap-on) • • • • • • • • •
7” Fascia Panel(Snap-on) Not available as reverse rolls
• • • • • • • • •
4040 Covered Fascia4”H x 4”D
• • • • •
4045 Headbox4¹⁄₂”H x 4”D • • • • •
5050 Headbox5”H x 4³⁄₄”D • • • • • • • • •
5555 Headbox5¹⁄₂”H x 5¹⁄₂”D • • • • • • • • •
7090 Headbox9”H x 7”D • • • • • • • • •
Custom Pocket(Call for details)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 77CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.19 cont.
SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For SL Clutches, Automate and Somfy Motor SystemsLIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
4” Smooth
5” Smooth
5”D-Tube
(for heavy shades)
DESCRIPTION
5050 Headbox5”H x 4³⁄₄”D •
5555 Headbox5¹⁄₂”H x 5¹⁄₂”D • •
7090 Headbox9”H x 7”D • • •
Custom Pocket(Call for details)
-
ROLLSTAR
Castec Solar Solutions | ROLLSTAR | page 78CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For L-SystemsLIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
Index No. 5.6.19 cont.1¹⁄₄” Tube
with Key Drive
1¹⁄₂” Tube
with Key Drives
1³⁄₄” Tube
with Key Drives, Smooth
1³⁄₄” Tube
with Key Drives, Smooth
(thick wall)
2¹⁄₈” Tube
with Key Drives, Smooth
(thick wall)
DESCRIPTION
L-System Fascia3x3 (Snap-on)3³⁄₄”H x 3³⁄₈”D
• •
L-System Fascia4x4 (Snap-on)4³⁄₈”H x 4¹⁄₈”D
• • •
4040 Covered Fascia4”H x 4”D
• • • •
4045 Headbox4¹⁄₂”H x 4”D • • • • *
5050 Headbox5”H x 4³⁄₄”D • • • • *
5555 Headbox5¹⁄₂”H x 5¹⁄₂”D * * * * *
7090 Headbox9”H x 7”D * * * * *
Custom Pocket(Call for details)
* Depends on shade height or for special application. Call for assistance.
-
Castec Solar Solutions | ROLLSTAR | page 79CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.9
ROLLSTAR-EX
SHADE STYLE• Rollstar-EXLIFTING SYSTEM• Clutch - Continuous Chain Operator (exterior)• DC50 Low Voltage, Series 400 & 500 MotorsHEM STYLE• Covered Hem PocketTOP TREATMENT• HeadboxLIGHT CONTROL CHANNEL• Not shownASSEMBLY OPTION• Floor-Mount• Wall-Mount
Headbox
Headbox Shelf
Stainless Steel Cable
Stainless Steel Cable
Guide Wire End Cap
Guide Wire End Cap
Covered Hem Pocket
Upper Cable Mount
FLOORCable Mounts
WALL Cable MountsFLOOR-MOUNT ASSEMBLY
WALL-MOUNT ASSEMBLY(shown without headbox)
-
Castec Solar Solutions | ROLLSTAR | page 80CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…
Index No. 5.6.10
SHADE STYLE• N/ALIFTING SYSTEM• N/AHEM STYLE• Covered Hem Pocket or Exposed Hem BarTOP TREATMENT• N/ALIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• Rollstar-EX Shades Parts Detail
Crimp SleeveCrimp Sleeve
Crimp Sleeve
Crimp Sleeve
Tension SpringTension Spring
Upper Cable CylinderUpper Cable Cylinder
UPPE
R CA
BLE
MO
UNTS
(inst
alle
d in
side
Hea
dbox
)
FLO
OR
CABL
E M
OUN
T
WALL CABLE M
OUNT Lower Cable CylinderFloor Mount
Cable Cylinder
Slotted L-Brack-
Ceiling Bracket
Slotted L-Brack-
L-Bracket
Guide Wire End Cap(showing small End Cap)
Guide Wire End Cap(showing small End Cap
SMALLCovered Hem Pocket
LARGE Exposed Hem Bar
LARGE Covered Hem Pocket
Thumb NutThumb Nut
Stainless Steel Cable
Stainless Steel Cable
Lock Nut
Lock Nut
Lock NutLock Nut
Thumb Nut
Thumb Nut
Cylinder Cover
CABLE ASSEMBLY(Wall System)
HEM BAR OPTIONS(Floor & Wall Systems)
CABLE ASSEMBLY(Floor System)
ROLLSTAR-EX
• The small hem bar is ⁵⁄₈” in diameter. This size can be used for shades up to 74”. • The large hem bar is 1³⁄₈” diameter. This size can be used for any shade but must be used for shades wider than 74”.
-
Castec Solar Solutions | ROLLSTAR | page 81CSS1904RSS_rev11042020 | © 2019 Fabritec, LLC.
At a glance…SHADE STYLE• Tube/Valance MatrixLIFTING SYSTEM• N/AHEM STYLE• N/ATOP TREATMENT• For Rollstar-EX SystemsLIGHT CONTROL CHANNEL• N/AASSEMBLY OPTION• N/A
Index No. 5.6.11
ROLLSTAR-EX
1¹⁄₄” Tube with
Key Drive
1¹⁄₂” Tube with
Key Drive
1³⁄₄” Tube with
Key Drive, Smooth
1³⁄₄” Tube with
Key Drive, Smooth
(thick wall)
2¹⁄₈” Tube with
Key Drive, Smooth
(thick wall)
DESCRIPTION
4045 Headbox4¹⁄₂”H x 4”D • • • • *
5050 Headbox5”H x 4³⁄₄”D • • • • *
5555 Headbox5¹⁄₂”H x 5 ”D * * * * *
7090 Headbox9”H x 7”D * * * * *
Custom Pocket(Call for details)
* Depends on shade height or for special application. Call for assistance. Note: Reverse Roll is not available with Rollstar-EX Shades.