H o m e i n t e l l i g e n c e

Roller Shutter associationwith Fibaro System

How to: make device association with Fibaro System.

Example scene: there are 3 roller blinds in a kitchen, each with separate switch.

Target: associate 3 Roller Shutters so that switch hold rolls up or down 3 roller blinds at

the same time.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Click settings icon in roller blind which switch key other 2 blinds are to be associated with.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

After completing previous step, Click "Advanced" set-tings tab

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Now click "Set up" button corresponding to chosen association group. Fibaro Roller Shutter supports two, independent association groups: ID1 and ID2, trig-gered each time switch key is clicked (ID1) or each time switch key is held (ID2). Using ID2 association group, single click opens just one roller blind, key hold triggers association, i.e. steers all roller blinds.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Tick devices to be associated.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Click disk icon to save association.

H o m e i n t e l l i g e n c e

How to: make device association with Fibaro System.

Now Home Center processes saved data and sends commands to all associated devices. After approx. 1 second, association is ready.