roles & descriptions trade knowledge, skills & … · scaffolding of steelwork, slung...

Roles & Descriptions

Hard Hat

Attend to site amenities, toilets, offices,

drying rooms, canteen etc. Occasional

offloading, sweeping and clearance of

rubbish etc.

Asbestos Awareness Hi-Vis Vest

Welfare Labourer CSCS Labourers Card Manual Handling Safety Boots

Full Driving License Goggles

Gloves

Hard Hat

Sweeping site, removing of rubbish,

unloading and transporting of materials

etc. under close supervision

Hi-Vis Vest

CSCS Labourers Card Asbestos Awareness Safety Boots

General Labourer Manual Handling Goggles

Full Driving Licence Gloves

Hard Hat

Hi-Vis Vest

Skilled Labourer CSCS Labourers Card Asbestos Awareness Safety Boots

Manual Handling Goggles

Full Driving Licence Gloves

Skilled tradesperson with suitable

experience of joinery / carpentry. NVQ Level 3 Hard Hat

Ability to work from drawings. Gold CSCS Card Hi-Vis Vest

Carpenter/joiner

Experience in undertaking first fix

carpentry i.e. floor joist, floors, stud work

etc

Full Driving License Safety Boots

1st & 2

nd Fix

Experience in undertaking second fix

carpentry such as skirting, hang doors, etc.Goggles

Gloves

CSCS Skilled Worker Card

having achieved or working

towards an NVQ / City & Guilds

identifying joinery / carpentry as

a primary competence.

TRADE KNOWLEDGE, SKILLS & EXPERIENCE ESSENTIAL QUALIFICATIONS PREFERABLE QUALIFICATIONS PPE

Fully experienced and able to do more

skilled work. They should be suitable for

heavier labouring, shovelling rubble, hand

digging, chasing out, light

demolition/stripping out breaker/kango

work, using a disk cutter, putting up heras

fencing, insulation, building alloy towers

etc.


experience of formwork/ shuttering

carpentry.

NVQ Level 3 Hard Hat

Experience in all aspects of shuttering

including reinforced concrete frames etcGold CSCS Card Hi-Vis Vest

Shuttering

Carpenter/Joiner

Ability to ensure the accuracy of the

formwork made for the concrete pouring

gangs to cast the concrete in.







Ability to make and erect formwork. Some basic steel fixing Goggles

Ability to work from drawings. Gloves


Gold CSCS Card Hi-Vis Vest

Plasterer Full Driving License Safety Boots

Goggles

Gloves


experience of bricklaying. Facework,

blockwork, manholes.


Ability to work on their own as well as part

of a gang.Gold CSCS Card Hi-Vis Vest

Bricklayer Ability to work from drawings. Full Driving License Safety Boots

Goggles

Gloves

Same knowledge and skills as the general

operative but also:

Working towards a CSCS Skilled

Worker Card/ CPCS (NVQ)Hard Hat

Full understanding of duties required for

ground works.

CPCS Card on at least one item of

plant (preferable for dumper/roller)Hi-Vis Vest

Capable of working to instruction with

minimal supervision.Driving License Safety Boots






Plasterboard ceilings and partitions to

MDF or timber backgrounds including

taping and jointing as necessary. Plaster

internal and external walls with plaster or

sand and cement rendering. Skim internal

walls and patch plaster

CSCS Card CSCS Skilled

Worker Card having achieved or

working towards an NVQ / City &

Guilds identifying Plastering as a

primary competence.




identifying bricklaying as a

primary competence.

CSCS Construction Site Op Card

Experience in the site preparation for,

bases, foundations and trenches.Manual Handling Goggles

Ability to work with others. Abrasive Wheels Gloves

GroundworkerUnderstanding of concrete works both

placing and finishing.

Drainage, kerbing and slabbing.

Provide assistance to tradesman.

CISRS Advanced Scaffolder Hard Hat

Full Driving Licence Hi-Vis Vest

Safety Boots

Scaffolder Goggles

Gloves

Full understanding of all aspects and

responsibilities of a Banksman/Slinger

CPCS – Blue (NVQ) Card in Slinger

Signalling.Hard Hat

Experience in safely slinging and signalling

to guide cranes of various types using

various methods i.e. hand and radio

signals.

Driving License Hi-Vis Vest

A reasonable level of work experience

recorded within CPCS logbook – a review

of the CPCS logbook must be undertaken

to determine operating experience prior to

starting assignment.

Safety Boots

Good understanding of English language. Goggles

Banksman/Slinger Gloves

Hard Hat

Prepares, fills, knots, primes and topcoats

all woodwork and metalwork internally and

externally. Prepares and fills all areas for

wall papering e.g. woodchip or lining

paper. Prepares and fills surfaces. Hangs

wallpaper

Hi-Vis Vest

CSCS Labourers Card - working

towards an NVQ in painting.Asbestos awareness Safety Boots

Painter Decorator NVQ Level 3 in painting Goggles

Red CPCS Slinger Signaller

Card


Erects, adapts and dismantles scaffold.

Works on all types of scaffold except drop

scaffolding of steelwork, slung scaffolds

using wire ropes, raking shores, manual

rope or winch operated boatswains’ chairs

and cradles. Applies knowledge of

Construction Regulations and NASC

CISRS Basic Certificate Part 2

Full Driving License Gloves

No formal trade qualification

but should have working

experience of trades- plastering,

joinery, plumbing

Manual Handling Hard Hat


CSCS General Labourer Card Safety Boots

Goggles

Gloves

Hard Hat

CSCS Labourers Card – time

served in core trade of carpentry,

plumbing or plastering, working

towards an NVQ in core trade.

NVQ Level 2 or above in carpentry,

plumbing or plastering.Hi-Vis Vest

Full Driving Licence Safety Boots

Goggles

Gloves

Full understanding of all aspects &

responsibilities of a Dumper Driver.Hard Hat

Experience in the safe operating on ‘site

dumpers’ Hi-Vis Vest





starting assignment

Safety Boots

Knowledge of the safe operation of

dumpers including layout and operation of

the controls, stability limits, daily checks,

and how to do them safely.

A valid Red/Blue CPCS Card in

Dumper Operating dependant on

certain class of Dumper plant

required i.e.

CPCS – Blue (NVQ) Card in

Dumper Plant OperationsGoggles

Dumper Driver Highly Safety conscious CPCS Forward Tipping

Dumper Tracked /WheeledManual Handling Gloves

Good understanding of English language. Driving License


responsibilities of a Telescopic Handler.Hard Hat

Handyman

Should be able to carry out minor works

that range from replacing light bulbs and

tap washers to carrying out minor painting

and trade repair work, will have basic tools.

Multi-Trader

A Multi-Trader comes from either a core

trade of a Carpenter, Plumber or Plasterer

(see these descriptions in detail for further

info). As well as this they should be skilled

and experienced in no less than 2 of the

following in addition to their own trade –

tiling (splash back), like for like plumbing,

patch plastering (1sqm), painting

(emulsion and gloss), carpentry (at least

internal doors) and minor brickwork.

Experienced and knowledgeable in the full

operation of various types of Telescopic

Handler.


Telescopic Handling


Telescopic HandlingHi-Vis Vest

Telescopic Forklift

Operator

Knowledge of the safe operation of the

telescopic handler including ability to carry

out daily visual checks and regular

inspections.

Manual Handling Safety Boots





starting assignment

Driving License Goggles

Highly Safety conscious Gloves

Good understanding of English language.

Hard Hat

Duties as general labourer, but will control

access to site and sign vehicles in and out

and accept and sign for deliveries.

Hi-Vis Vest

Gateman CSCS General Labourers Card Manual handling Safety Boots

Driving License Goggles

Gloves

SSSTS Hard Hat

CSCS General Labourers Card First Aid at Work (4 Days) Hi-Vis Vest

Ganger Safety Boots

Goggles

Gloves

16th edition or 17th Edition +

Part 1 and Part 2 City & GuildsJIB ECS Approved Electrician Hard Hat

Electrician

Delegate work to operatives, shows

leadership, motivates, monitors

productivity and duties relating to

Bricklayer’s Labourer, Carpenter’s

Labourer. Will inform site management of

need to replace personnel. Has experience

and is capable of managing approximately

10 operatives as well as completing all

necessary allocation / time sheets and

liaising closely with Site Management.

Must be able to carry out all aspects of

commercial electrical work including repair,

maintenance and fault finding plus any

new installation required.

CSCS/ECS carded Full Driving Licence Hi-Vis Vest

Safety Boots

Goggles

Gloves

REPAIRS & MAINTENANCE TRADES SKILLS MATRIX

Working with tradesman, dropping off

materials, clearing rubbish from properties.Hard Hat

Ensuring properties are clean and tidy for

handover –and the external areas of the

properties

Hi-Vis Vest

Driver Labourer

Experience of working within a tenanted

environment and good customer service

skills are a must.


Full Driving License Manual Handling Goggles

Gloves

Working with trades man, ripping out

bathroom suites. Kitchens, assisting in the

removal of ceilings, floorings, fireplaces.

Hard Hat

Rip out

Labourer/Demolition

Labourer/Skilled

labourer



skills are a must

Hi-Vis Vest

CCDO Safety Boots

CSCS Labourers Card Asbestos Awareness Goggles

Manual Handling Gloves

Electrician


Full Driving Licence

Carrying out routine maintenance repair

work, kitchen upgrades, and bathroom

upgrades, rewiring showers, rewiring lights

and socket and periodic testing.

Hard Hat

Must be confident in testing your own

work, and completing test sheets. Hi-Vis Vest

Maintenance Electrician



skills are a must

Safety Boots

Asbestos Awareness Goggles

2391/17th edition ECS/JIB Card Full Driving Licence Gloves

Working as part of a squad, rewiring

occupied and void properties, working with

another electrician and a mate, and will be

expected to be capable of rewiring a

standard 3 bed council property within 3

days.

Hard Hat

Installation Electrician



skills are a must.

Hi-Vis Vest

16th

or 17th edition ECS/JIB Card Full Driving License Safety Boots


Gloves

Hard Hat

Electricians MateElectrical Qualifications desirable

Full Driving LicenseHi-Vis Vest


Goggles

Gloves

Working in void and occupied properties,

doing combi swaps and new heating

systems, replacing gas fires, capping off

cookers.

Hard Hat

Working with the Electricians, doing full

and partial rewires – Cable pulling, rip out

work and other associated duties (may

need a bit more for this can call someone

and get a better job description)



skills are a must.



skills are a must

Hi-Vis Vest

Gas Plumber Gas Safe registered Full Driving License Safety Boots


Gloves

Doing yearly servicing, routine

maintenance and repair work in occupied

and void properties, capping off Gas,

reconnecting gas supply.

Hard Hat

You will have experience of working from

hand held devicesHi-Vis Vest

Service Engineer



skills are a must.

Safety Boots

Gas Safe Registered Full Driving License Goggles

Asbestos Awareness Gloves

Working in occupied or void properties

from a hand held device.Hard Hat

Duties include routine repairs and

maintenance work, gutter cleaning and

replacements, changing taps, toilet and

basin swaps, drain and disabled adaption

work.

Hi-Vis Vest

Maintenance Plumber



skills are a must.

Safety Boots

CSCS Labourers Card working

towards NVQ in primary

competence.


NVQ level 3 or equivalent Gloves

Full Driving License

Working in both occupied and void

properties.Hard Hat

Doing bathroom swaps, kitchen sink

replacements, gutter programmes,

disabled adaptation work, fitting level entry

showers – tiling and plasterer patching

experience would be advantageous.

Hi-Vis Vest

Plumber



skills are a must.



competence.

Asbestos Awareness Safety Boots

NVQ Level 3 or equivalent Goggles


Working in both occupied and void

properties.Hard Hat

Fitting new kitchens, pipe boxing in

kitchens and bathrooms, skirting’s and re-

hanging doors. Experience of working

within a tenanted environment and good

customer service skills are a must.

Hi-Vis Vest

Kitchen Fitter



competence.

Asbestos Awareness Safety Boots

NVQ Level 3 or equivalent Goggles


Working as part of a team on various

fencing project’s,Hard Hat

Removing existing fencing and replacing

with new, duties include, digging holes,

sizing new posts and measuring out and

concreting them in.

Asbestos Awareness Hi-Vis Vest

Fencer



skills are a must


towards an NVQ in Joinery.

NVQ Level 2 in Joinery or

equivalentSafety Boots

Full Driving Licence Goggles

Gloves

Working from job tickets or a hand held

device in both occupied and void

Properties.

Hard Hat

Duties will include, easing doors,

rehanging doors, fitting bath panels,

kitchen unit replacements, changing locks,

pipe boxing and replacing floor boards.






Hi-Vis Vest



skills are a must.

NVQ Level 3 Safety Boots

Maintenance Joiner Gold CSCS Card Goggles


Working in occupied or void properties Hard Hat

Duties will include, boarding ceilings, full re-

skims and plasterer patching.Hi-Vis Vest

Experience in rendering would be

advantageous




Guilds identifying Plastering as a

primary competence.


Plasterer



skills are a must.

Gold CSCS Card Goggles


Working in occupied or void properties NVQ Level 3 Hard Hat

Duties include, plaster patch work

following on from electricians who will have

completed full or partial rewires. Splash

backs in kitchens and bathrooms, and

tiling level entry showers.




skills are a must


Plaster Patcher/Tiler Goggles

Gloves

Working in void or occupied properties NVQ Level 3 Hard Hat




Guilds identifying Plastering or

tiling as a primary competence.






Splash backs in kitchens and bathrooms,

and tiling level entry showers.Gold CSCS Card Hi-Vis Vest

Tiler



skills are a must.


Goggles

Gloves

Working in void or occupied properties Hard Hat

Doing internal or external repaints, gloss

and emulsion workAsbestos awareness Hi-Vis Vest

Painter Decorator



skills are a must

CSCS Labourers Card - working

towards an NVQ in painting.NVQ Level 3 in painting Safety Boots


Gloves

Working from job tickets in void or

occupied propertiesHard Hat

Duties will include, pointing, concreting

floors and pathways, concrete repair work

to floors and pathways, rebuilding garden

walls. Bricking up fire places and re-

bricking external walls after new heating

systems have been fitted.

Hi-Vis Vest

Bricklayer



skills are a must





primary competence.


Gold CSCS Card Goggles


You will be working in occupied or void

propertiesHard Hat

Fitting laminate or Lino flooring in kitchens

and bathrooms, you must be able to weld

your own work

NVQ Level 3 Hi-Vis Vest

Floorlayer



skills are a must

Gold CSCS Card Safety Boots









Guilds identifying Floor Laying as



Gloves




Goggles

Gloves

NVQ Level 2 or above in glazing Hard Hat


Safety Boots

Goggles

Gloves

Hard Hat

Hi-Vis Vest

General cleaning/mopping and sweeping

of internal domestic and office locations.

No qualification but would ideally

have 6 months + experience in

similar role

Full Driving Licence Safety Boots

Goggles

Gloves

Hard Hat

External and Internal cleaning and general

estate care of non-estate and estate

locations



similar role

Full Driving Licence Hi Vis Vest

Boots

Trousers

Hard Hat

Hi-Vis Vest

External collecting/picking of rubbish and

leaves/debris


have experience in similar roleFull Driving Licence Safety Boots

Goggles

Gloves

Hard Hat

Landscape Operative

Glazier

Must be able to carry out the installation,

maintenance and repair of PVC or timber

frame sash of box windows etc.

CSCS Labourers Card – time

served in core trade of glazing,

working towards an NVQ

Cleaner

Caretaker

Litter Picker / Leaf

Picker




Guilds identifying Floor Laying as


Roofer

Must be capable of carrying out repair and

maintenance to domestic roofs including

all aspects of tiles and possibly flat roofs

and guttering




Guilds identifying Roofing as a

primary competence.

External strimming/cutting and general

external grounds maintenance care of

estate and non-estate locations.



similar role


Safety Boots

Goggles

Gloves

Hard Hat

Hi-Vis Vest

Safety Boots

Goggles

Gloves

Hard Hat

Landscape Gardner Hi-Vis Vest

Safety Boots

Goggles

Gloves

INFRASTRUCTURE TRADES SKILLS MATRIX

GENERALSame knowledge and skills as the Welfare

operative but also:


Worker Card (NVQ)Hard Hat

OPERATIVEGood understanding of general

construction works.Manual Handling Hi-Vis Vest

A good general understanding of site

duties.Driving License Safety Boots

Capable of carrying out manual labour

work and assist with other trades as

required.

Maintain site tidiness.


operative but also:



SKILLED LABOURER CSCS Construction Site Op Card



Landscape Operative

Landscape Operative

with Spraying ticket

External grass strimming/cutting and

general external grounds maintenance

care of estate and non-estate locations

6 months + experience in similar

role with PA1 and PA6Full Driving Licence

External strimming/cutting and general

external grounds maintenance care of

estate and non-estate locations. Operative

should also have more detailed knowledge

and skill in planting and seasonal upkeep

of grounds. Operative should also have

more detailed training and qualifications of

2 Years’ Experience and or

relevant NVQ or Horticultural

qualification. Should also hold

relevant certificates in plant

usage such as chainsaws

Full Driving Licence


construction works.PASMA Hi-Vis Vest

Good understanding of duties required for

ground works.Manual Handling Safety Boots


minimal supervision.Driving Licence

Ability to work with others.

Provide assistance to chargehand & other

tradesman.


operative but also:




ground works.

CPCS Card on at least one item of

plant (preferable for dumper/roller)Hi-Vis Vest


minimal supervision.Driving License Safety Boots

Experience in the site preparation for,

bases, foundations and trenches.Manual Handling

(WP Coats

should be

bomber

jackets)

Ability to work with others. Abrasive Wheels

Understanding of concrete works both

placing and finishing.PASMA

Drainage, kerbing and slabbing. Small Tools

Provide assistance to tradesman. Cat Scan RD 4000

Experience of all aspects of drainage. CSCS Skilled Worker Card CPCS Slinger /Signaller Hard Hat

Ability to use trench boxes or supports Cat ScanPreviously gained or working

toward an NVQ Hi-Vis Vest

Ability to work to plans. Confined Spaces Ticket Manual Handling Safety Boots

Ability to use laser level where required. Driving License Gloves

Glasses

Wellingtons

Wet Suit

Same knowledge and skills as a pipe layer

but also:CSCS Skilled Worker Card CPCS Slinger /Signaller Hard Hat

Knowledge and experience of all aspects

of deep excavation including trenching &

shoring.

Cat ScanPreviously gained or working

toward an NVQ Hi-Vis Vest

SKILLED LABOURER CSCS Construction Site Op Card

GROUND WORKER CSCS Construction Site Op Card

PIPE LAYER

DEEP OPEN CUT PIPE

LAYER

Fully understand the requirements of the

OSHA Excavation StandardConfined Spaces Ticket Manual Handling Safety Boots

Knowledgeable in all aspects of safe

excavation site proceduresShoring Ticket Driving License Gloves

Glasses

Wellingtons

Wet Suit

Previous experience of working on

tunnelling projects.CSCS Construction Site Op Card

Working towards NVQ Level 2 in

Tunnelling OperationsHard Hat

Competent in operating specialist

tunnelling plant to form tunnels in the

workplace within the relevant sector of

industry.

Tunnelling Safety Card

(Crossrail)First Aid Hi-Vis Vest

Ability to carry out sprayed concrete tunnel

lining where required.Confined Spaces Ticket Manual Handling Safety Boots

Ability to interpret the given information

relating to the use of specialist tunnelling

plant to carry out tunnelling operations.

Driving Licence Gloves

Conform to workplace health and safety Glasses

Ability to work with others.Respiratory

protection

Ear Protection

Good general understanding of concrete

associated works.

CSCS Skilled worker Operative

Card (Or working towards NVQ)Hard Hat

Ability to place concrete by hand or pump. Manual Handling Hi-Vis Vest

Ability to level and vibrate concrete. Driving License Safety Boots

Experience of tamp float and power float

finishes.

Capable of carrying out remedial works.

Ideally from a joinery / steel fixing

background.



towards an NVQ

SMSTS – Site Managers Safety

Training Scheme (5 days)Hard Hat

Ability to communicate at different levels. Driving License VGC Level 1 BSC Safety Course Hi-Vis Vest

TUNNEL

OPERATIVE/MINER

CONCRETE

OPERATIVECSCS Construction Site Op Card

WORKING FOREMAN

DEEP OPEN CUT PIPE

LAYER

Receive work instruction from General

Foreman.Cat Scan Safety Boots

Liaise with Engineers. Small Tools

Very safety aware and able to set up safe

systems.Manual Handling

Review method statements and work

package plans.First Aid at Work (4day)

Supervise and plan work.

Record information and keep an accurate

diary.

Good experience and understanding of

general construction works.

SSSTS – Site Supervisors Safety

Training SchemeHard Hat

Provide support to the general or working

foreman.Small Tools Hi-Vis Vest

Ability to ensure that all work undertaken is

completed with due regard for quality,

productivity and safety.


Undertake practical work appropriate to

the craft skill & experience First Aid at Work

Driving Licence

Good level of experience of general

construction works and the experience of

supervising a small team of operatives.

CSCS General Construction

Operative Card (with experience)CPCS Hard Hat

Expected to lead by example in a working

supervisory position and carry out any

tasks assigned by overseeing Foreman

with regards to safety, working to method

statements and work plans.



towards an NVQ for a particular

skill

CSCS Gold Card Hi-Vis Vest

Capable recording daily work records and

delivering safety briefs/tool box talks etc.Driving License Cat Scan Safety Boots

Manual Handling

First Aid at Work (4 day)


experience of formwork / carpentry.Manual Handling Hard Hat

GANGERMAN

CARPENTER

SHUTTERING



towards and NVQ / City & Guilds



WORKING FOREMAN

CHARGEHAND



towards an NVQ

Experience in all aspects of shuttering

including reinforced concrete frames etcDriving License Hi-Vis Vest

Ability to ensure the accuracy of the

formwork made for the concrete pouring

gangs to cast the concrete in.

Safety Boots

Ability to make and erect formwork.

Ability to work from drawings.


experience of joinery / carpentry. Manual Handling Hard Hat

Ability to make and erect formwork. Driving License Hi-Vis Vest

Ability to work from drawings. Safety Boots

Experience in undertaking first fix

carpentry i.e. floor joist, floors, stud work

etc

Experience in undertaking second fix

carpentry such as skirting, hang doors,

and door saddles etc.


Driving License Hi-Vis Vest

Safety Boots


experience of bricklaying.Manual Handling Hard Hat

Ability to work on their own as well as part

of a gang.Driving License Hi-Vis Vest

Ability to work from drawings. Safety Boots

Experienced in Test & Inspection and

Maintenance work of electrical installations

and/or wiring.

JIB Electricians Card Installation Electrician ECS Card Hard Hat

Knowledgeable in all aspects of electrical

installation

17th Edition Regulations - 2391

Testing & Inspection CSCS Construction Site Op Card Hi-Vis Vest

Driving Licence Safety Boots

BRICKLAYER





primary competence.

ELECTRICIAN 16th

&

17TH

EDITION 2391

TESTING

CARPENTER

SHUTTERING






CARPENTER 1ST

& 2nd

FIX






STEELFIXER


experience of carrying out rebar

installation & erection, expected to be able

to competently read & understand steel

fixing drawings and bending schedules.



towards and NVQ identifying

steel fixing as a primary

competence.

Experience in applying coats of plaster to

interior walls, ceilings, and partitions of

buildings, to produce finished surface,

according to blueprints, architect's

drawings, or oral instructions

Small Tools Hard Hat

Experience in using hand tools and

portable power toolsDriving Licence Hi-Vis Vest

Safety Boots

Full understanding of all aspects and

responsibilities of a Banksman/Slinger

CPCS – Blue (NVQ) Card in Slinger

Signalling.Hard Hat

Experience in safely slinging and signalling

to guide cranes of various types using

various methods i.e. hand and radio

signals.

First Aid at Work (4 Day) Hi-Vis Vest





starting assignment.


Good understanding of English language. Driving License


responsibilities of a Dumper Driver.


Dumper Operating dependant on

certain class of Dumper plant

required i.e.


Dumper Plant OperationsHard Hat

Experience in the safe operating on ‘site

dumpers’ including both articulated and

rigid-frame machines with two- or four-

wheel drive & with front, rotary, side-tipping

or high-lift skips.

CPCS Forward Tipping

Dumper Tracked /WheeledFirst Aid at Work (4 Day) Hi-Vis Vest





starting assignment

CPCS Dump Truck –

Articulated ChassisManual Handling Safety Boots

DUMPER GENERAL

PLANT OPERATOR

PLASTERER CSCS Construction Site Op Card

BANKSMAN / SLINGERRed/Blue CPCS Slinger Signaller

Card

Knowledge of the safe operation of

dumpers including layout and operation of

the controls, stability limits, daily checks,

and how to do them safely.

CPCS Dump Truck – Rigid

ChassisDriving License

(WP Coats

should be

bomber

jackets)

Highly Safety conscious



responsibilities of driving specific size

excavators.

A valid Red/Blue CPCS

Excavator Card dependant on

type of excavation machine

required i.e.


Excavation OperationsHard Hat

Experience and knowledge in all aspects

of excavation, ducting and drainage.

CPCS Excavator 360 above

or below 10 tonnesFirst Aid at Work (4 Day) Hi-Vis Vest


excavator including layout and operation of

the controls, carrying out risk

assessments, understanding method

statements, carrying out daily safety

checks and location of operators manual,.

CPCS Excavator 180 above

or below 5 tonnesManual Handling Safety Boots





starting assignment

Driving License

(WP Coats

should be

bomber

jackets)




responsibilities of a Telescopic Handler.


Telescopic HandlingHard Hat

Experienced and knowledgeable in the full

operation of various types of Telescopic

Handler i.e. industrial telescopic, 360 slew

etc.

First Aid at Work (4 Day) Hi-Vis Vest


telescopic handler including ability to carry

out daily visual checks and regular

inspections.


DUMPER GENERAL

PLANT OPERATOR

360 / EXCAVATOR

MACHING OPERATOR

TELESCOPIC /

FORKLIFT OPERATOR


Telescopic Handling





starting assignment

Driving License

(WP Coats

should be

bomber

jackets)



Ability to carry out pre start checks on the

machine.Manual Handling Hard Hat

Ability to work to the Engineers datum

levels during excavations.Spills response training Hi-Vis Vest

Ability to carry out performance checks

whilst operating plant. Driving License Safety Boots

A review of the CPCS logbook must be

undertaken to determine operating

experience.

(WP Coats

should be

bomber

jackets)


Spills response training Hi-Vis Vest

Driving License Safety Boots

(WP Coats

should be

bomber

jackets)

Operate MEWP as required within their

competence range.

Follow instructions from Line Managers

and be confident in asking for clarification.

Arrive on site in time for the proposed start

of work.

Attend site safety briefings and inductions

and comply with the instructions given

HEAVY PLANT

OPERATOR

Same as small plant but with the

qualifications and ability to operate

relevant machinery above 8 ton.

CPCS Card in specific heavy

plant machine.

MEWP OPERATORCPCS MEWP 3a Licence Plant

Operator IPAF

TELESCOPIC /

FORKLIFT OPERATOR


Telescopic Handling

SMALL PLANT

OPERATOR

CPCS Card in specific small

plant machine





starting assignment

Adhere to all Health and Safety Standards

and Regulations and PPE requirements at

all times.

Comply with Working Time Regulations

and Fatigue Standards to ensure no

breaches.

Complete pre-start checks and post work

checks as required per shift.

Report and health and safety issues in a

timely manner.

Record any defects in the correct manner

and report to relevant personnel.

Same knowledge and skills as the welfare

operative but also:PTS Small Tools Safety Helmet

Good understanding of general

construction works.Minimum Medical Level 4 Emergency First aid

High Vis Vest

(O)

A good general understanding of site

duties.Communications Cert Safety Boots

Maintain site tidiness. Manual HandlingHi Vis Trousers

(O)

CSCS General Construction Op

Card

Trackworker PTS Small Tools Safety Helmet

Basic Track Induction Course Emergency First aid Hi Vis Vest (O)

If PTS not held prior to 9th

June

2003Communications Cert Safety Boots

Minimum Medical Level 4 Manual HandlingHi Vis Trousers

(O)

As Trackman but including knowledge of:- PTS Rail Stressing (Level 1) Safety Helmet

PTS Groundworker

Demonstrable competence (by

certification) in the use of Permanent Way

hand tools and other basic track skills to

the same level as defined in the Network

Rail Track Induction course.

Track Chargeman

MEWP OPERATORCPCS MEWP 3a Licence Plant

Operator IPAF

Excavation Adjacent to or Underneath

TrackManual Handling Hi Vis Vest (O)

Manual Lifting and Packing of Track Track Induction Course Raising and Removing Temporary

Speed Restrictions (Level 1) Safety Boots

Unloading Ballast and Ballast ProfilingIf PTS not held prior to 9

th June

2003

High Vis

Trousers (O)

Checking Basic Clearances Small Tools

Setting up and Removing of

Temporary Speed Restriction

Equipment.

Attention to Fastenings with respect to

Gauge and Track CircuitryCommunications Cert

Sluing and Lifting Track Emergency First aid

Joining of Rails –Cutting and Drilling Minimum Medical Level 4

Joining of Rails –Fitting, Replacement

and Lubrication of Fishplates

Hot Weather Inspections

Routine Track Patrolling

Lookout /Ideally should have 1 year experience on

the rail infrastructure.PTS Emergency First aid Safety Helmet

Site WardenUnderstands fully the requirements and

briefings given by the COSSLookout Communications Cert Hi Vis Vest (O)

Should not be easily distracted. Minimum Medical Level 3 LKT: P(Peewee), K(Kango) Safety Boots

Hi Vis Trousers

(O)

Full Lookout Kit

inc

LKT & SW

Arm Bands,

Horn,

Detonators &

TCOC.

Ideally should have 2 years’ experience on

the rail infrastructure.PTS Communications Cert Safety Helmet

Ability to communicate effectively. COSS Small ToolsHigh Vis Vest

(O)

Ability to identify and set-up the safest

system of work and be responsible for

those working with in the group.

Minimum Medical Level 4 Manual Handling Safety Boots

Track Chargeman

COSS – Controller of

Site Safety

Cat Scan RD400Hi Vis Trousers

(O)

Cannot carry out IWA duties if

accompanied at all times is

required

First aid at work (4 day)COSS Arm

Band

Lookout (and full lookout kit)

LKT: P(Peewee), K(Kango)

Requires the same knowledge as a COSS

/ IWA but must also:PTS Lookout (and full lookout kit) Safety Helmet

Have the ability to carry out T2H duties as

instructed by the COSS & Signaller.COSS or IWA AOD (PO) & (LXA)

High Vis Vest

(O)

Should not be easily distracted. AOD HS First aid at work (4 day) Safety Boots

Minimum Medical Level 1 Communications CertHi Vis Trousers

(O)

Hand Signal Kit

inc Detonators

& Signal

replacement

key.



Have the ability to carry out level crossing

attendance duties as instructed by the

COSS.

IWA or COSS AOD (PO) & (HS)High Vis Vest

(O)

AOD LXA First aid at work (4 day) Safety Boots


(O)



Have the ability to carry out points operator

duties as instructed by the COSS / MC /

CC/ ES.

IWA or COSS AOD (LXA) & (HS)High Vis Vest

(O)

AOD PO First aid at work (4 day) Safety Boots


(O)

AOD LXA - Level

Crossing Attendant

AOD PO - Points

Operator

COSS – Controller of

Site Safety

AOD HS- Hand signaller

Points

Keys/Winders

PTS Lookout (and full lookout kit) Safety Helmet

COSS AOD (HS) (PO) & (LXA)High Vis Vest

(O)

Protection Controller Communications Cert Safety Boots

Minimum Medical Level 4 First aid at work (4 day)Hi Vis Trousers

(O)

PC Arm Band



required

COSS Arm

Band

Same as the COSS but should ideally

have the following:PTS Manual Handling Safety Helmet

4 years’ experience on the rail

infrastructureCOSS Communications Cert

High Vis Vest

(O)

Experience of working around machinery. MC RRV First aid at work (4 day) Safety Boots

Logbooks must be kept up-to-date and

reviewed regularly.

Necessary attachments identified

by the client.Tandem Lift

Hi Vis Trousers

(O)

Minimum Medical Level 2 CC RRVMachine

Controlling kit

OTM / RMMM MC Armband

Lookout (and full lookout kit)COSS

Armband

AOD PO

Spills response training

Same as the Machine Controller but must

also have the following: PTS Manual Handling Safety Helmet

Ability to ensure that all lifting movements

are in accordance with the lifting plans.COSS Communications Cert

High Vis Vest

(O)

MC RRV First aid at work (4 day) Safety Boots

CC RRV Tandem LiftHi Vis Trousers

(O)

Necessary attachments identified

by the client.OTM /RMMM

Crane /

Machine

Controlling kit

AOD PO - Points

Operator

Protection Controller

(PC)

Same as COSS but with the ability to co-

ordinate and set-up the safe system for

more than 1 group.

Machine Controller

Crane Controller

Minimum Medical Level 2 Lookout (and full lookout kit) CC /MC

Armband

AOD POCOSS

Armband


Same as COSS but with the ability to: PTS Lookout (with full lookout kit) Safety Helmet

Establish, maintain and give up worksites. COSS AOD (HS) (PO) & (LXA)High Vis Vest

(O)

Control, co-ordinate and authorise the

movement of plant and machinery within

the worksite.

ES PC Safety Boots

Ensure the method of communication

remains effective.Minimum Medical Level 2 MC /CC (and kit)

Hi Vis Trousers

(O)

Ensure the marker boards and other items

are not compromised.Emergency First Aid / Electrical 1

st

aidES Arm Band

Communications CertCOSS Arm

Band

Strap man Marker Boards


Good knowledge of the rail infrastructure. PTS COSS / IWA Safety Helmet

CAT scan RD4000 Stressing Level 1-4High Vis Vest

(O)

Is competent in setting up Laser and Digs. ONC Civil Engineering or

equivalent.First aid at work (4 day) Safety Boots


(O)

Is experienced in CAT Scanning.



required

ALC Trained

Has ability to read and apply designs.

Have knowledge / experience of Plain Line

tamping.

Computer literate.

Engineering Supervisor

(ES)

Technical Officer

Crane Controller

Knowledge of the rail infrastructure. PTS Communications Cert Safety Helmet

Ability to easily understand instruction. Certification for gas cutting First aid at work (4 day)High Vis Vest

(O)

Has a good understanding of all

requirements and risks of cutting identified

structures.

Minimum Medical Level 4 Safety Boots

Hi Vis Trousers

(O)

Specialist PPE -

SPAT’s, flame

retardant

coveralls,

boots, gloves,

welding

goggles.

PTS AC/DC Manual Handling Hard Hat

COSS Working at Heights Hi Vis Vest (O)

Minimum Medical Level 2 Full First Aid Boots

Trousers (O)

PTS AC/DC Full First aid Hard Hat

COSS/IWA Communications Cert Hi Vis Vest (O)

MC/CC Manual Handling Boots

Minimum Medical Level 2CSCS General Construction Op

CardTrousers (O)

IPAF

Harness training

Working at heights

Minimum 12 months as OLE Linesman 2 PTS AC/DC Full First aid Hard Hat

OLE Linesman 3

Burner

OLE Linesman 1Minimum 12 months experience as a

trainee linesman or OLE experience

OLE Linesman 2

Minimum 12 months as trainee linesman

or similar OLE/Power line experience.

Must be able to undertake basic OLE

construction activities under direction.

Capable of changing Cantiler, swivel

bracket, taking and recording Height &

Staggers, registering Cantiler, MIRs to

design, bonding, jumper and Drape Feed

Installation. Ability to cut an in-line

insulator into the system, install UK1 7

MK3 droppers, install click & compression

splices and use Biccon wedges & tools.

Must be able to construct, renew, enhance

and modify OLE in accordance with design

drawings and specifications

COSS/IWA Communications Cert Hi Vis Vest (O)

MC/CC Manual Handling Boots

Minimum Medical Level 2CSCS General Construction Op

CardTrousers (O)

Harness training

Working at heights

Nominated or Authorised Person

WHITE COLLAR TECHNICAL SKILLS MATRIX

TRADE KNOWLEDGE, SKILLS & EXPERIENCE ESSENTIAL QUALIFICATIONS PREFERABLE QUALIFICATIONS

Use knowledge and skills to

promote a positive health and safety

culture in the workplace

Degree in health and safety or

risk management

Experience in undertaking safety

tours, risk assessments and site

inspections.

BTEC/ HNC / HND or degree in

engineering or construction.

Able to provide advice on a range

of specialist areas, e.g. fire regulations,

hazardous substances, noise,

safeguarding machinery and

occupational diseases.

CSCS

OLE Linesman 3

Health and safety officer NEBOSH / IOSH

Excellent negotiation,

communication and interpersonal skills.

strong analytical, problem-solving

and organisational skills IT literate and capable of

acquiring, reviewing and applying

detailed legal, technical and regulatory

information

Able to effectively compile and

manage estimates from initial enquiry

to submission of final offer.

BTEC/ HNC / HND or degree in

engineering or construction.

Effectively provide input and

direction into the project plan and

establish the appropriate pricing

structure.

NVQ in Construction

Contracting Operations Levels 3

and 4

Ability to undertake assessments of

material, labour and equipment

required and analyse quotes from sub-

contractors and suppliers.

Certificate and Diploma in Site

Management Level 4

Ability to assess risks and costing

across the project. Experience of presenting to the

board, stakeholders and the client

where required.

Have good commercial acumen

Ability to communicate well,

verbally and in writing. Experience in conducting general

office administration duties

NVQ Level 2 or 3 in Business &

Administration

Able to perform administrative

duties, such as organise documents,

create reports and keep records.

Sage

Excellent telephone manner and

communication skills.

Effective time management.

Proficient in various Microsoft

Office applications, such as Excel, Word

and Outlook

Health and safety officer NEBOSH / IOSH

Estimator (at varying

levels)Industry experience

Administrator GCSE’s

Experienced in preparing plans,

contracts, budgets, bills of quantities

and other documentation

Ability to minimise the costs of a

project and enhance value for money,

while still achieving the required

standards and quality. Able to perform risk analysis

evaluations

Knowledge of relevant building and

construction regulations and standards.

Ability to keep track of any

variations to the contract that may

affect costs and create reports to show

profitability.

Strong numerical and IT skills



and PowerPoint.

Experienced in supervision of

contractors/staff. Qualified first aider

Appropriate degree in

construction/building management,

building engineering/studies,

construction engineering

management or civil/structural

engineering..

Experienced in checking and

preparing site reports, designs and

drawings.

SMSTS

Ability to undertake safety

inspections and ensuring construction

and site safety

CSCS Supervisor/Manager CIOB Chartered status

Knowledge of building regulations

and health and safety legislation as well

as other legal requirements.

Asbestos Awareness

Problem solving skills

Excellent communication skills with

site team, architects, engineers,

surveyors and planners.

Good commercial awareness

Ability to motivate others

QS (at varying levels)

RICS accredited qualification/

Commercial / Quantity Surveying

degree educated

RICS Chartered status

Site Manager (at varying

levels)

Experience in putting together bids

for new work and negotiating and

agreeing contracts.

Member of Institution of Civil

Engineers, the Royal Institution

of Chartered Surveyors or the

Institute of Commercial

Management

Knowledge of financial reporting

and managing the supply chain.

Appropriate degree in

Construction field

Strong experience in management

of projects and setting project

objectives Able to perform risk analysis

evaluations

Strong commercial awareness

Strong communication and client

liaison skills

Excellent project management and

team leadership skills.

Extensive understanding of the

construction industry

Strong numerical and IT skills

Experience of compiling and

submitting bids to existing or

prospective Clients

Excellent appreciation of what the

client needs and how best to articulate

how their organisation can provide that

Knowledge of the industry

Great attention to detail

Good numeracy and literacy.

Effective time management.



and Outlook Experienced in estimation, cost

control, and risk analysisDegree in Engineering

Bid Manager Degree Standard

Members of Royal Institution of

Chartered Surveyors (RICS) or the

Institution of Civil Engineers (ICE)

Cost Engineer Degree Standard

Commercial Project

Manager

Experience in providing planning

and cost controlling support for all

projects including verifying and

checking of invoices and claims from

suppliers, vendors and subcontractors

to ensure that all project expenditures

are captured and properly recorded.

Primavera

MS Project

Experience of managing and

supporting Project ManagersDegree Standard

Knowledge in producing cost

plans, providing cost advice,

undertaking procurement activities and

carryout post contract cost control.



of Chartered Surveyors

Proven track record of cost

planning and managing costs on

complex construction projects so that

the projects are delivered within

budget. Over 5 years’ experience in

providing commercial direction and

managing commercial teams. Extensive knowledge of financial

management of projects, bid

generation and negotiating and

agreeing contracts. Sustained performance in terms of

securing tenders and new business

opportunities Full understanding of UK

Construction contracts and law. Ability to identify new market

opportunities

Excellent commercial awareness

Strong client liaison skills

Project management and team

leadership Extensive understanding of the


Commercial Director



of Chartered Surveyors or

Institute of Civil Engineers

Chartered status

Cost Engineer Degree Standard

Cost Manager

Experience in seeking

opportunities for the company to

support growth.

Experience in financial

management of projects, putting

together bids for new work and

negotiating and agreeing contracts.

Knowledge of risk management,

procurement, financial reporting and

managing the supply chain.

Strong commercial awareness

Strong client liaison skills

Project management and team

leadership Extensive understanding of the


Talent for negotiation.

Experience in being first-line

supervisor for construction trades. Overall knowledge and

understanding of a wide variety of

electrical systems and their installation

methods.

Good track record of supervising

demanding electrical projects

Experience in overall management

of all electrical installation activities on

a project, to ensure satisfactory

completion with minimal defects, within

the agreed timescale and to the

satisfaction of the client

Good understanding of HSQE, safe

working practices.

Experience in providing planning

and controls leadership for projects Primavera

Experience in managing work

cycles on a particular project and

ensuring the successful and safe

completion of a job

MS Projects

Electrical Supervisor JIB ECS AccreditedDegree in technical or engineering

related field.

Planner HNC / HND

Commercial Manager



of Chartered Surveyors or

Institute of Civil Engineers

Knowledge in technical planning

and ensuring consistent application of

standards and procedures, including

templates and guidance and support to

programme/project team

ASTA

Ability to develop resource loaded,

labour costed project schedules in

accordance with Rail Project

Management and planning processes.

Excellent project management

skills

Ability to communicate well.

Good level of experience in planning,

management, coordination and financial

control of a project.

Degree / Construction / civil /

engineering etc

Ability to ensure the project is completed

on time and within budgetSMSTS

Experience in problem solving and risk

management.CSCS / First aid

that the project's objectives are met.

Knowledge of budget control and cost

analysis.

Good commercial awareness

Ability to motivate

Good management and leadership skills.

Extensive experience in planning,

budgeting, overseeing professional teams

and advising on a range of potential issues.

Degree / Construction / civil /

engineering etc

Experience in the recruitment and

management of construction teams, audit

suppliers and sub-contractors

CSCS / First aid

Extensive knowledge of programme

management to ensure timely completion

of projects

SMSTS

Strong commitment to Health and Safety

ensure quality standards and customer

expectations are met and exceeded.

Project Director Prince 2 / MAPM / APMP

Planner HNC / HND

Project Manager Prince 2 / MAPM / APMP

Working on civil engineering project,

highways construction and build.CSCS SMSTS

HNC or above Qualification PTS

On site liaison with client, stakeholders,

suppliers and consultantsCSCS SMSTS

Understand and implement safety systems HNC or above Qualification PTS

Ensure all personnel under your control are

fully briefed and work in a safe manner.

Assist the Project Manager and Engineers

on strategic planning and risk

management,

Manage QA activities across sites

Assist team to identify any implications on

cost of contract.

Maintain diary records appropriately.

Assist the contract in achieving operational

standards.

Proficient IT skills

Appropriate software knowledge

Quality Inspection of Civil Engineering

work, Consult with the Design team to

advise on the development of the project.

Be able to read and interpret architectural

as well as inspection within construction

and fit outs.

ISO9001 ISO14001/ ISO18001

NCR and corrective actions QA Management Lead Auditor

Auditing towards quality standards,

ISO9001NCR

As a construction manager you will manage

all aspects of operational work within

designated geographical area, managing

supervisory staff and all duties associated

with direct labour and subcontractor

teams.

Degree qualified or equivalent

HND/HNC

Quality

Inspector/Assurance

Manager

Contracts

Manager/Construction

Manager/ Supervisor

Building services qualification

Setting Out

Engineer/Site Engineer

Sub Agent/ Section

Engineer/ Project

Engineer

Document Controller

To manage the flow of documentation

externally and within the Project team..

Ensuring that those who need design and

construction information, have access to it

You will be responsible for the overall

safety, quality, cost control, customer

satisfaction and delivery of the works

programme

CSCS Manager or Contracts

Manager

SSSTS

CSCS

Managing operations of TFM contracts,

Hard and Soft Services, Public and Private

Sector recruitment across the UK. From

Director to assistant FM level.

PFI Cleaning

SPV Helpdesk/ Reception

This includes SPV and asset management

within operations and construction. Soft services Security

Hard services

BIFM

Looking after M&E maintenance contracts,

Managers looking after Mobile and static

engineers.

City & Guilds Degree qualified

HND/ HNC 17th edition

All industries in public and private sector JIB/B&ES

AC Multi-skilled

Gas Fabric

M & E HVAC

PM from refurbishments to M&E, HVAC

Installation and new builds.CITB

Prince 2, APM

Good level of experience in planning,

management, coordination and financial

control of a project.

Ability to ensure the project is completed

on time and within budget

Experience in problem solving and risk

management.

that the project's objectives are met.

Knowledge of budget control and cost

analysis.

Facilities/ Operations

Managers

Contract

Managers/Maintenance

Managers/Hard Services

Engineers/ Mechanical,

Electrical/HVAC/Gas,

Fabric.

Mobile and static engineers, within

Mechanical and electrical maintenance,

HVAC, Combustion and Fabrics. Installation

or maintenance engineers.

Project Managers/

Project Engineers

Installation,

Refurbishment, small

works projects

Degree qualified or equivalent.

Contracts

Manager/Construction

Manager/ Supervisor

Building services qualification

General Foreman/

Finishing Foreman

will be responsible for taking the lead in

driving the construction programme and

continual improvement in HSE&Q on site.

SMSTS

Responsible for the day to day

management of the HSQE Department

including both Health and Safety Advisor’s

and administrative support staff;

IOSH/ NEBOSH ISO14001/18001

Assist in the compilation and review of risk

assessment as required;ISO9001 Lead Auditor

To interpret and advise on the

implementation of HSQE Legislation and

Approved Codes of Practice;

CSCS

To advise on the implementation of

Industry Standards, Codes of Practice and

Safe Systems of Work;

SMSTS

Investigating the causes of accidents, the

circumstances leading to them and

compiling the necessary reports and giving

advice to prevent recurrence;

To carry out inspections and audits in all

workplaces to identify both negative /

positive working conditions and practices

To procure the correct subcontractors and

materials within the agreed time deadlines

& budgets.

Knowledge of building, material

components, Building

Regulations and Health & Safety

Maintain good relationships with

subcontractors / suppliers to provide

prompt, accurate and effective supply

chain.

Construction Management Skills

such as Programming, Planning

and compiling reports

Review the capability and quality of

subcontractors to be appointed to ensure

they are capable of providing the service

required and their compliance with the

terms and conditions of the appropriate

subcontract.

Negotiate and agree of rebates with Key

providers

Identify risks in the existing supply chain in

terms of quality and quantity

Implement strategy to alleviate risks

identified

HSQE Manager

Buyers

Supply Chain Managers

Working in a project environment

(engineering or construction)

involving significant exposure to

a wide range of supply-related

activities

Review and build on the existing supply

chain process

Cascade objectives and values through

our supply chain ensuring our supply chain

partners are connected to our overall

Vision.

Facilitate integration and collaboration with

internal customers

Provide mechanism for supply chain

development and coaching, incorporating

and delivering clear 360 improvement

plans

Extend strategic relationships and

partnerships to key areas

Plan and implement sustained and actual

improvement of supply chain delivery

across our process.

To lead all project procurement activities

within a defined region, ensuring best-

practice procurement is deployed on all

contracts, and in the management of the

supply base.

Senior level working in a project

environment (engineering or

construction) involving significant

exposure to a wide range of

supply-related activities

To manage a regional procurement team

in a multi-office environment.

Change and project

management capability.

To implement agreed strategic sourcing

engagement strategies across the supply

chain.

Team management and

influencing / facilitation skills

To ensure demonstrable project margin

and profit enhancement is obtained from

all project procurement activities within the

business unit.

Senior level experience in a

procurement role

Engage with project leaders to agree and

implement the project bid and delivery

strategy

Approval of procurement specification on a

project

Align the preferred supply chain to ensure

individual project objectives are met

Ensure compliance with procurement

strategy and processes across the region

Procurement Managers

Supply Chain Managers

Working in a project environment

(engineering or construction)

involving significant exposure to

a wide range of supply-related

activities

Review performance of supply chain and

manage local relationships

National and regional collaboration and

aggregation of requirements across

relevant projects to leverage spend

opportunities

Overseeing all procurement and supply

matters for projects in a business unit

Implementing the procurement

improvement program across the business

unit

Build good relations with client and project

team.

Project Manager, Project

Engineer, Building Services

Manager or M&E Manager for a

leading M&E Contractor or

Principal / Main Contractor.

Utilise expertise in presenting to clients,

developing ideas and briefs to develop

tender opportunities

You will have a proven track

record in managing M&E /

Building Services processes in a

construction environment.

Ensure all aspects of the M&E Building

Services process are satisfactorily

completed on time and within cost and to

the highest possible standards

Liaison with construction teams and

landlords and clients

Design control and co-ordination – directly

liase with designers

Able to use Excel, Word and Project

Co-ordinate contractors/design against

spec and costs

Visit sites at least one day per week

Clear understanding of standard work

practices/relevant BS standards and codes

The review of all construction information

including all drawings.

Procurement Managers

M&E / Building Services

Manager / Coordinator

Design ManagerRelevant / Design or

Architectural Qualifications

You must be able to demonstrate a

proven track record as a Design

Manager or Design Coordinator

with a reputable main / principle

contractor

Document control, the production of a

drawing register and distribution matrix

(including monitoring of revisions and

changes).

Ensuring the consultants were briefed on

the required distribution of drawing

information to all parties.

The breaking up of contract into packages

and then the compilation of design

deliverable’s and responsibility matrix and

the monitoring and reporting against this

information.

Prepared job specific schedules to assist

surveying / buying and construction.

Co-ordinated the approval of all

component design items to ensure that the

site maintains fluid construction and the

Providing design information for the project

reporting to the Design Manager & Design

Technician to provide all aspects of the

design production.

Relevant / Design or


Knowledge of Building Regulations and

AutoCAD protocols. AutoCAD proficient

Also to be involved in management of

external architects on some projects.

Production and management of individual

project drawing production

Management and tracking of external

architects

Assistance in production of drawing

packages, plans, elevations

Analysing drawings, collating actions and

chasing responses

Ability to produce information on several

projects

Design Coordinator /

CAD Technicians

Design ManagerRelevant / Design or


You must be able to demonstrate a

proven track record as a Design

Manager or Design Coordinator

with a reputable main / principle

contractor

Establish and maintain a regional network

of links with Clients, Developers, Project

Managers, Architects, Quantity Surveyors

and others who may initiate work

opportunities.

Establish and maintain a nationwide sector-

specific stakeholder network of links with

Clients, Developers, Project Managers,

Architects, Quantity Surveyors and others

who may initiate sector-specific work

opportunities.

Analyse, identify and follow up business

opportunities, through personal contacts,

business information services and media

reports.

Maintain and build the company’s market

position, raising the market’s awareness of

the company, as a quality-led building

services company.

Maintain contact with contracts in progress

and site staff regarding the possibility of

further work.

Arrange and attend functions as may, from

time to time, be required.

Ensure that the best image of the

Company is projected at all times,

ensuring that opportunities for good

publicity for the Company are utilised.

Sales / Business

Development Managers

Sales / Business Development to

develop new business / work

opportunities in a construction

contractor environment

roles & descriptions trade knowledge, skills & … · scaffolding of steelwork, slung...

Documents