roland corporation.cdn.roland.com/assets/media/pdf/tdw-20_om.pdf ·...
TRANSCRIPT
3
Before using this product, carefully read the sections entitled: “Using the Unit Safely” and “Important Notes” (p. 4–p. 7 ). These sections provide important information concerning the proper operation of the product. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new product, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.
In the interest of product improvement, the specifications and/or contents of this package are subject to change without prior notice.
Copyright © 2008 ROLAND CORPORATIONAll rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
TDW-20_e.book 3 ページ 2008年7月17日 木曜日 午前11時35分
ol alerts the user to things that must be he specific thing that must be done is
the design contained within the circle. In the ymbol at left, it means that the power-cord e unplugged from the outlet.
ol alerts the user to important instructions or e specific meaning of the symbol is by the design contained within the triangle. In he symbol at left, it is used for general rnings, or alerts to danger.
ol alerts the user to items that must never be are forbidden). The specific thing that must is indicated by the design contained within the case of the symbol at left, it means that t never be disassembled.
TDW-20_e.book 4 ページ 2008年7月17日 木曜日 午前11時35分
e symbrried out. Tdicated byse of the sug must b
e symbarnings.Thtermined e case of tutions, wa
e symbrried out (t be done
e circle. Ine unit mus
4
Using the Unit Safely
Thcaincapl
Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.
* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.
Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
Thwdethca
Thcanothth
5
..
..
• Protect the product from strong impact. (Do not drop it!)
...............................................................................................
• Before installing the TDW-20, you must first always turn off the TD-20 and unplug its power cord.
• Never step on, nor place heavy objects on the product.
...............................................................................................
• Install the circuit board only into the specified product (TD-20). Remove only the specified screws during the installation.
...............................................................................................
• Keep any screws you may remove and the included installation tool in a safe place out of children’s reach, so there is no chance of them being swallowed accidentally.
...............................................................................................
TDW-20_e.book 5 ページ 2008年7月17日 木曜日 午前11時35分
• Do not open or perform any internal modifications on the product. (The only exception would be where this manual provides specific instructions which should be followed in order to put in place user-installable options; see p. 13.)
...............................................................................................
• Do not attempt to repair the product, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.
...............................................................................................
• Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the TD-20.
...............................................................................................
• Never install the product in any of the following locations.• Subject to temperature
extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are• Exposed to rain; or are• Dusty or sandy; or are• Subject to high levels of
vibration and shakiness..............................................................................................
• In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the product.
.............................................................................................
t recautions
it may be impossible to restore the contents of tored on a CompacfFlash card once it has been
rporation assumes no liability concerning such
d to transport the product, package it in the box ding) that it came in, if possible. Otherwise, you
n e equivalent packaging materials.
TDW-20_e.book 6 ページ 2008年7月17日 木曜日 午前11時35分
ional P
rtunately, that was sRoland Coof data.
n you neeuding pad
eed to us
6
Important Notes
Placement
• Do not expose the product to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the product.
• When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form. Damage or malfunction may result if you attempt to use the product in this condition. Therefore, before using the product, you must allow it to stand for several hours, until the condensation has completely evaporated.
Repairs and Data
• Please be aware that all data contained in the product’s memory may be lost when the product is sent for repairs. Important data should always be backed up on a memory card, or written down on paper (when possible). During repairs, due care is taken to avoid the loss of data. However, in certain cases (such as when circuitry related to memory itself is out of order), we regret that it may not be possible to restore the data, and Roland assumes no liability concerning such loss of data.
Addi
• Unfodatalost.loss
• Whe(inclwill
7
chase the TDW-20 expansion board for TD-20 rized Roland dealer, the included sounds are old, to you by Roland Corporation, for e in music production, public performance,
ny of the included sounds in a commercial or l recording without paying any additional wever, you must strictly adhere to the following lines on any music recording that utilize material
or duplication of any of the sound contained in ther as they exist on this sound module or by any matting, mixing, filtering, re-synthesizing, therwise editing for use in another product or for ly prohibited without the express written and. All unauthorized giving, trading, lending, e, re-distribution or re-sale of the sounds TDW-20 are expressly prohibited.
: Be creative and respectful in your application of unds. These sounds are for your use only. DO NOT
TDW-20_e.book 7 ページ 2008年7月17日 木曜日 午前11時35分
Before Using Cards
Using CompactFlash Cards
• CompactFlash cards are constructed using precision components; handle the cards carefully, paying particular note to the following.• To prevent damage to the cards from static electricity, be
sure to discharge any static electricity from your own body before handling the cards.
• Do not touch or allow metal to come into contact with the contact portion of the cards.
• Do not bend, drop, or subject cards to strong shock or vibration.
• Do not keep cards in direct sunlight, in closed vehicles, or other such locations (storage temperature: -25 to 85˚ C).
• Do not allow cards to become wet.• Do not disassemble or modify the cards.
* CompactFlash and are trademarks of SanDisk
Corporation and licensed by CompactFlash association.
* Roland Corporation is an authorized licensee of the
CompactFlash™
and CF logo ( ) trademarks.
Copyright
• When you purfrom an autholicensed, not scommercial usbroadcast, etc.
You may use anoncommercialicense fees. Hocrediting guidefrom TDW-20.
Reproduction the TDW-20, eimeans of reforprocessing or ore-sale, is strictconsent of Rolrenting, re-issuincluded in the
In Plain Englishthe TDW-20 soCOPY THEM.
s .................................................... 26
ents Parameters [INST] ..........................................26nt Selection .................................................................26EDIT Parameters ........................................................26s.......................................................................................29 Volume of Each Trigger Input............................29
sor...................................................................................30r Improvements........................................................30
..........................................................................................30
m Types (15) ...............................................................30l Types (3) .....................................................................31ions (9) ..........................................................................31put Gain Parameter ..................................................32e Monitor (“solo” mode).........................................32..........................................................................................32put Gain Parameter ..................................................32cts Monitor (“solo” mode) ....................................32
ressor.............................................................................33uction (GR) Meter......................................................33meters [KIT] ................................................................33rn ON/OFF Switch....................................................33gs....................................................................................34
d Trigger Parameter Function ..............................34 the Trigger Information........................................34
TDW-20_e.book 8 ページ 2008年7月17日 木曜日 午前11時35分
unctionm InstrumInstrumeAbout V-
er SettingMinimum CompresParamete
bience .....
New RooNew WalMic PositNew OutAmbienc
lti-EffectsNew OutMulti-Effe
ster CompGain Red
m Kit ParaPad Patteger SettinAdvanceChecking
8
Contents
Using the Unit Safely............................................ 4
Important Notes ................................................... 6
Installing the TDW-20 in the TD-20................... 10IMPORTANT! Please Read before Beginning the Installation Process .................................10IMPORTANT! Backing Up Your Data .............................................12How To Install the TDW-20 Expansion Board............................13Updating the TD-20 with the CompactFlash Card..................15
Installation du TDW-20 dans le TD-20 .............. 16IMPORTANT! Lire ce qui suit avant d’entreprendre la procédure d’installation ...................16IMPORTANT! Sauvegarde des données.......................................18Installation de la carte d’expansion TDW-20.............................19Mise à jour du TD-20 à l’aide de la carte CompactFlash........21
Features............................................................... 22About the Drum Kits...........................................................................24
New FDru
Mix
Pad
Am
Mu
Ma
Dru
Trig
9
TDW-20_e.book 9 ページ 2008年7月17日 木曜日 午前11時35分
Copy Functions ....................................................................................35Trigger Bank Copy ......................................................................36Copying an Instrument Set .....................................................36Copying an Instrument.............................................................37Quick Jump Functions to the Copy Screen .......................37
Settings for the Entire TD-20 ...........................................................38Master Output..............................................................................38Output Assign (OTHER).............................................................38Using Foot Switches and Pad Switches ..............................39MIX IN new Function .................................................................39
Importing Original TD-20 Data into the Expanded TD-20 ......40Other Functions ...................................................................................41
The Kit Selection Function.......................................................41Choosing a Drum Kit from a CompactFlash......................41
Appendices ......................................................... 42Drum Instrument List .........................................................................42Preset Drum Kit List ............................................................................46
Information ......................................................... 53
r Original TD-20 Data!
ent data to your CompactFlash card before you -20.g an update, all data and settings in the TD-20
why it is important to back up your data and onpactFlash card before updating. If you are pactFlash card included with your TDW-20, ONLY AFTER turning the power on. Otherwise n the card will automatically open.
the Installation Process
TDW-20_e.book 10ページ 2008年7月17日 木曜日 午前11時35分
0
up You your currll the TDWn executinost. That’sngs on a C
the Comt the cardupdater” o
ning
10
Installing the TDW-20 in the TD-2
Installation Procedure1. Check the package contents to be sure you have the expansion
board, screwdriver (for removing the cover on the back of the TD-20), locking key (for securing the expansion board into place) and CompactFlash card. Please leave the expansion board in its package until it is time to install it.
2. Back up your data (carefully read p. 12).
3. Install the TDW-20 expansion board (p. 13).
4. Update the TD-20 (p. 15).
Enclosed CompactFlash Card• Do NOT use with a computer BEFORE executing the update
process.
Back • Save
instaWheare lsettiusinginserthe “
IMPORTANT! Please Read before Begin
11
n Handling the TDW-20
f the TDW-20 can be damaged by static se observe the following precautions when
hing the TDW-20, you must touch some other t to safely discharge any static electricity that your body or clothing.ng the TDW-20, grasp the edges of the circuit O NOT touch the components on the circuit
e connectors. to store or ship the TDW-20, place it in the (conductive bag for electrostatic protection).
the circuitry or connectors inside the TD-20.
the TDW-20, do not force it into the slot. If icult, take the TDW-20 out and then try again. ed tool to lock it in place.
inished installing the TDW-20, double-check
ect should get inside the TD-20, request ur retailer, the nearest Roland Service Center, or
Roland distributor, as listed on the “Information”
TDW-20_e.book 11ページ 2008年7月17日 木曜日 午前11時35分
Data Compatibility• Data created on the original TD-20 and backups stored on a
CompactFlash card can be used with an expanded TD-20 (p. 40).
• The original TD-20’s factory preset drum kits can be used with an expanded TD-20.
• Data created with an expanded TD-20 is not compatible with original TD-20.
• The TD-20 will not function if you remove the TDW-20 after performing the update.
Caution whe• Components o
electricity. Pleahandling it.• Before touc
metal objecmight be in
• When holdiboard and Dboard or th
• If you needoriginal bag
• DO NOT touch
• When insertinginsertion is diffUse the provid
• When you’ve fyour work.
• If a foreign objservicing by yoan authorized page.
AVE)].
rename the backup, press [F4 (NAME)].
ation screen appears, press [F5 to save the data.
not to proceed with the backup, press [F1
XECUTE)] to save the data.
BULK DUMP Data Stored on Your
ual kit data or your entire kit’s data stored on a r for it to be compatible with the expanded load it into the TD-20, and save the data to a d BEFORE updating with the TDW-20.
TDW-20_e.book 12ページ 2008年7月17日 木曜日 午前11時35分
12
If you are using the CompactFlash card included with your TDW-20, insert the card ONLY AFTER turning the power on. Otherwise the “updater” on the card will automatically open.
1. Insert a CompactFlash card into the TD-20’s front panel memory card slot.* Carefully insert the CompactFlash card all the way in—until
it is firmly in place.
2. Press [CARD].The [CARD] and CompactFlash indicators light up. The “CARD MENU” screen appears. * If you insert a card that has never been used with the TD-20,
the screen will indicate “Unformatted!” Press [CARD] and [F4 (FORMAT)] to format.
3. Then press [F1 (SAVE)].
4. In the “CARD SAVE” screen, use [+/-] or [VALUE] to select the backup destination for the data you are saving.
5. Press [F5 (SIf you want to
6. The confirm(EXECUTE)]If you decide (CANCEL)].
7. Press [F5 (E
If You Have ComputerIf you have individcomputer, in ordeversion, you mustCompactFlash car
IMPORTANT! Backing Up Your Data
13
ircuit board holder as shown in the .
onnector of the expansion board all the e connector of the TD-20. Make sure that ach circuit board holder protrudes e holes in the TDW-20.
TDW-20_e.book 13ページ 2008年7月17日 木曜日 午前11時35分
1. Power-off the TD-20, and unplug the power cord from the AC outlet.
2. Turn the TD-20 over on its back.
* When turning the TD-20 on its back, take care not to damage the buttons and knobs. To protect them, spread a cushion or towel over your work surface.
3. Remove the eight screws (marked by arrows) on the bottom panel. Take off the cover.
* Do not remove any screws other than those marked by ar-rows.
4. Orient the cillustration
5. Insert the cway into ththe tip of ethrough th
How To Install the TDW-20 Expansion Board
e cover using the eight screws you step 3.
TDW-20_e.book 14ページ 2008年7月17日 木曜日 午前11時35分
14
6. Using the tool included with the TDW-20, turn the circuit board holders in the LOCK direction to fasten the TDW-20 in place.
When you’ve finished installing the TDW-20, double-check to make sure that it is installed correctly and that the circuit board holders are in the LOCK position.
7. Reattach thremoved in
15
wer back on and execute the system
, press the [F5 (EXECUTE)] button.
Card
TDW-20_e.book 15ページ 2008年7月17日 木曜日 午前11時35分
1. With the power off, insert the CompactFlash Card provided in this package.
2. Turn the power on and the following screen appears.
3. To execute the update, press the [F5=UPDATE] button.
* It may take 3 minutes before update is finished.
* Do not turn the power off during the update process.
4. When the screen shows “Update Completed.”, turn off the TD-20 and remove the CompactFlash card.
5. Turn the poinitialize.
6. To initialize
Updating the TD-20 with the CompactFlash
pie de sauvegarde des données u TD-20!
données sur la carte CompactFlash avant W-20.
tion d’une mise à jour, toutes les données et ètres enregistrés sur le TD-20 sont supprimés. i il est important de faire une copie de s données et des paramètres sur une carte avant de procéder à la mise à jour. Si la carte jointe au TDW-20 est utilisée, elle doit être EMENT APRÈS que l’appareil a été mis sous , le dispositif de mise à jour de la carte s’ouvrira ent.
endre la procédure
TDW-20_e.book 16ページ 2008年7月17日 木曜日 午前11時35分
D-20
une coales d
gistrer lestaller le TDde l’exécu les param pourquoegarde depactFlashpactFlashée UNIQU
ion. Sinonmatiquem
trepr
16
Installation du TDW-20 dans le T
Procédure d’installation1. Vérifier le contenu de l’emballage pour s’assurer d’avoir la carte
d’expansion, un tournevis (pour retirer la plaque à l’arrière du TD-20), l’outil de verrouillage (pour fixer la carte d’expansion) et la carte CompactFlash. Laisser la carte d’expansion dans son emballage jusqu’au moment de l’installer.
2. Faire une copie de sauvegarde des données (lire attentivement la p. 18).
3. Installer la carte d’expansion TDW-20 (p. 19).
4. Mettre à jour le TD-20 (p. 21).
Carte CompactFlash jointe• NE PAS utiliser avec un ordinateur AVANT d’avoir exécuté la
procédure de mise à jour.
Faireorigin• Enre
d’insLors tousC’estsauvComCominsértensauto
IMPORTANT! Lire ce qui suit avant d’end’installation
17
à prendre pour manipuler le
tique peut endommager les composants du re les précautions suivantes pour le manipuler.ucher le TDW-20, il faut toucher un objet métal-liminer de façon sécuritaire l’électricité statique tre accumulée dans le corps ou dans les
TDW-20, saisir les côtés de la carte de circuits t NE PAS toucher les composants sur la carte de rimés ni les connecteurs.0 doit être entreposé ou expédié, le placer dans origine (sac conducteur offrant une protection que).
r les circuits ni les connecteurs à l’intérieur du
ion du TDW-20, ne pas l’insérer de force dans la tion est difficile, retirer le TDW-20 puis ser l’outil fourni pour le verrouiller en place.
llation du TDW-20 terminée, revérifier le travail
nger tombe à l’intérieur du TD-20, s’adresser au entre de services Roland le plus proche ou à un land autorisé mentionnés dans la liste de la tion » pour faire procéder à la réparation.
TDW-20_e.book 17ページ 2008年7月17日 木曜日 午前11時35分
Compatibilité des données• Les données créées sur le TD-20 original et les copies de
sauvegarde enregistrées sur une carte CompactFlash peuvent être utilisées avec un TD-20 équipé d’une carte d’expansion.
• Les batteries originales du TD-20 réglées en usine peuvent être utilisées avec un TD-20 équipé d’une carte d’expansion.
• Les données créées avec un TD-20 équipé d’une carte d’expansion ne sont pas compatibles avec un TD-20 original.
• Le TD-20 ne fonctionne pas si le TDW-20 est retiré une fois que la mise à jour a été faite.
PrécautionsTDW-20• L’électricité sta
TDW-20. Prend• Avant de to
lique pour équi peut s’êvêtements.
• Pour tenir leimprimés ecircuits imp
• Si le TDW-2le sachet d’électrostati
• NE PAS toucheTD-20.
• Lors de l’insertfente. Si l’inserréessayer. Utili
• Une fois l’instaexécuté.
• Si un objet étradétaillant, au cdistributeur Ropage « Informa
r [F5 (SAVE)].
er la copie de sauvegarde, appuyer sur [F4
confirmation s’affiche; appuyer sur [F5 pour enregistrer les données.
les commandes et ne pas faire de copie de ppuyer sur [F1 (CANCEL)].
r [F5 (EXECUTE)] pour enregistrer les
es BULK DUMP sont dans l’ordinateur
trousses individuelles ou toutes les données de registrées dans un ordinateur, elles doivent être D-20 et enregistrées sur une carte CompactFlash er à la mise à jour avec le TDW-20, pour être la version expansée.
TDW-20_e.book 18ページ 2008年7月17日 木曜日 午前11時35分
18
* Si la carte CompactFlash fournie avec le TDW-20 est utilisée, elle doit être insérée APRÈS que l’appareil a été mis sous ten-sion. Sinon, le dispositif de mise à jour de la carte s’ouvrira au-tomatiquement.
1. Insérer une carte CompactFlash dans la fente pour carte mémoire qui se trouve sur le panneau avant du TD-20.
* Insérer soigneusement la carte CompactFlash à fond – jusqu’à ce qu’elle soit fermement en place.
2. Appuyer sur [CARD].Les voyants [CARD] et CompactFlash s’allument. L’écran « CARD MENU » s’affiche.
* Si la carte insérée n’a jamais été utilisée avec le TD-20, l’écran affichera « Unformatted! ». Appuyer sur [CARD] et sur [F4 (FORMAT)] pour formater la carte.
3. Appuyer ensuite sur [F1 (SAVE)].
4. À l’écran « CARD SAVE », utiliser [+/-] ou [VALUE] pour sélectionner la destination des données à sauvegarder.
5. Appuyer suPour renomm(NAME)].
6. L’écran de (EXECUTE)]Pour annulersauvegarde, a
7. Appuyer sudonnées.
Si des donnéenregistréesSi des données dela trousse sont enchargées dans le TAVANT de procédcompatibles avec
IMPORTANT! Sauvegarde des données
19
upports de la carte de circuits imprimés ontre l’illustration.
nnecteur de la carte d’expansion à fond necteur du TD-20. S’assurer que de chaque support de la carte de circuits épasse des ouvertures du TDW-20.
TDW-20_e.book 19ページ 2008年7月17日 木曜日 午前11時35分
1. Mettre le TD-20 hors tension et débrancher le câble d’alimentation de la prise.
2. Tourner le TD-20 sens dessus dessous.
* Veiller à ne pas endommager les boutons et les manettes en tournant le TD-20 sens dessus dessous. Pour les protéger, dé-poser un coussin ou une serviette sur la surface de travail.
3. Retirer les huit vis (indiquées par des flèches) de la plaque inférieure. Retirer la plaque.
* Ne retirer aucune vis autre que celles qui sont indiquées par des flèches.
4. Placer les scomme le m
5. Insérer le codans le conl’extrémitéimprimés d
Installation de la carte d’expansion TDW-20
couvercle en place et le fixer à l’aide des rées à l’étape 3.
TDW-20_e.book 20ページ 2008年7月17日 木曜日 午前11時35分
20
6. À l’aide de l’outil fourni avec le TDW-20, tourner les supports de la carte de circuits imprimés en position LOCK (verrouillé) pour fixer le TDW-20.
* Une fois l’installation du TDW-20 terminée, revérifier le tra-vail pour s’assurer qu’il est installé correctement et que les supports de la carte de circuits imprimés sont à la position LOCK (verrouillé).
7. Remettre lehuit vis reti
21
’appareil sous tension et initialiser le
iser l’appareil, appuyer sur le bouton E].
pactFlash
TDW-20_e.book 21ページ 2008年7月17日 木曜日 午前11時35分
1. L’appareil étant hors tension, insérer la carte CompactFlash fournie dans l’emballage
2. Mettre l’appareil sous tension; l’écran suivant s’affiche.
3. Pour exécuter la mise à jour, appuyer sur le bouton [F5=UPDATE].
* La mise à jour peut prendre 3 minutes.
* Ne pas mettre l’appareil hors tension pendant la procédure de mise à jour.
4. Quand l’écran affiche « Update Completed » (mise à jour terminée), mettre le TD-20 hors tension et retirer la carte CompactFlash.
5. Remettre l’système.
6. Pour initial[F5=UPDAT
Mise à jour du TD-20 à l’aide de la carte Com
re Buzz Control” gives more dynamic response hen adding “snare buzz” to the toms or kick (p.
User Interface, New functions
nterface has been improved, but new algorithms on definition and stereo presence. New functions om types, 3 new wall material choices and 7 new 0).
TDW-20_e.book 22ページ 2008年7月17日 木曜日 午前11時35分
anced Snaresence w
ence —y has the ih resoluti
15 new roitions (p. 3
22
Features
New Sounds and 50 New Drum Kits (100 total) The new acoustic sounds have more punch, expressiveness, stereo presence and dynamic range. The Processed and Electronic sounds give you lots of new choices for everything from Alternative Pop, Hip Hop or Club music. The USER memory is now 100 kits, including 50 NEW kits, and the TD-20’s original preset kits.
New Editing and Performance Power • A new, Large “Mic Size” choice for the kick drum enhances low
frequency attack (p. 26).• More “Mic Position” choices for more precise microphone
placement (p. 30). • Full “Kit Resonance” function, triggered by the bass drum,
adds overall kit depth and presence (p. 30).• New Snare Drum Rim function allows selected layering choices
(p. 27). • Electronic sounds now have a new Dynamic pitch bend
feature (p. 28).• Turn the snares on or off, or change from a normal Hi-Hat to
“Fixed Hi-Hat” using foot or pad switches (p. 39).• “Dynamic Interval Control” results in a more accurate response
to your playing dynamics and speed (p. 34).• “Enhanced HH Control” improves the feel and response of the
V-Hi-Hat (p. 23).
• “Enhand p26).
AmbiNot onloffer higincludemic pos
23
ersorted your own trigger bank settings from the version, we advise you to double check the ters for the KD-120. As dynamic response has , re-adjusting those parameters will make you comfortable while playing.
notes about the Hi-Hatommend that you spend time adjusting the
ters to adapt to your performance techniques.
mportant is correctly setting the “offset” play each time. S: [KIT] + [TRIGGER]
plash Sens” parameter is also important. e time testing this setting.S: [TRIGGER]–[F3 (HI-HAT)]
ber that for each kit, there is a separate the sound level of the “Foot Closed (Pedal .S: [KIT]–[F2 (FUNC)]–[F1 (VOLUME)]
nd that for the sound level of the Hi-Hat that erent levels for the “Head” and “Rim” can et a good sound balance. e MIXER screen. Press [F5] so you can adjust eparately.
TDW-20_e.book 23ページ 2008年7月17日 木曜日 午前11時35分
Improved Memory Storage on a CompactFlash CardUp to 99 full backups on the CompactFlash Card. Your current CompactFlash Card stays compatible on the new, expanded version, as well as the original version (p. 24).
Directly “audition” a kit on the CompactFlash card.You can choose between preset kits: TD-20/TDW-20 and kits saved on CompactFlash card (p. 41).
You can play the kit before loading it into the USER area. (however, pad patterns will not work when being played from the CompactFlash card)
Sequencer• Additional Preset Patterns• 50 new Preset Patterns have been added (P 101 – 150).
KD-120 UsIf you have imporiginal TD-20 trigger paramebeen improvedfeel even more
ImportantWe strongly recHi-Hat parame
• The most ibefore you
ACCES
• The “Foot SSpend som
ACCES
• Also rememcontrol forHH)” sound
ACCES
• Keep in misetting diffhelp you gWhen in ththe levels s
s when looking at it in your computer is different. in the difference between “original” TD-20 data,
grading with the TDW-20.
like
“TD20BK01.TD0.”
he original version.
s Backup No.1, “BK08” would mean backup
0
like
“TDW2BK01.TD0.”
the upgraded version.
s Backup No.1, “BK99” would mean backup
erns saved independently on the CompactFlash
he card) will appear as
“TD20P001.TD0.”
s pattern No.1. Pattern No.100 appears as
TDW-20_e.book 24ページ 2008年7月17日 木曜日 午前11時35分
24
After you have completed the upgrade process, you will find that the user memory has expanded to 100 Kits: 50 NEW kits from 1–50 and the original TD-20 pre-set Kits from 51–100. These 100 factory preset kits are always available via the “copy” function, or when totally re-setting the TD-20. So you have 100 USER kits to work with.
CompactFlash Card Data• All user drum kits can be backed up to the CompactFlash card
for a total of 99 full back-ups.• Kit data on the CompactFlash card can be played (but not
edited) without loading it into the TD-20 (p. 41).• The Import function allows you to load data saved prior to
updating (p. 40).
When importing a previously saved “backup” the kits will appear from kit No.51.
Backup File NamesThis is important for those who might want to organise their data in their computers or share data with other TD-20 users.
How Names appear
Though you can give a name to your backup file that you can see when loading/saving with a CompactFlash card in the TD-20, the
name that appearHere we will explaand data after up
Original TD-20
Backup 1 appears
“TD20” indicates t
The “BK01” meanNo.08.
Expanded TD-2
Backup 1 appears
“TDW2” indicates
The “BK01” meanNo.99.
Pattern Files
This refers to pattCard.
Pattern No.1 (on t
The “P001” mean“TD20P100.TD0.”
About the Drum Kits
25
Backup 3Backup 2kup 1 Backup 99
KIT 100
KIT 4KIT 3
KIT 2 1
Backup 3Backup 2Backup 1
KIT 50
KIT 4KIT 3
KIT 2KIT 1
Backup 8
TDW-20_e.book 25ページ 2008年7月17日 木曜日 午前11時35分
TD-20CARD
KIT 100
User
KIT 4KIT 3
KIT 2KIT 1
Bac
KIT
[CARD]–[F2 (LOAD)]
[CARD]–[F1 (SAVE)]
[COPY]–[F1(KIT)]–[F2 (PRESET)]
KIT 100
TDW-20 Preset
KIT 4KIT 3
KIT 2KIT 1
PRESETTD-20 Preset
CARD(Original TD-20)
[CARD]–[F3 (IMPORT)]
LOAD
SAVE
IMPORT
CO
PY
rument to a non v-edited state press [SHIFT] and ST EDIT screen. This was previously referred to as iginal TD-20 version.
ds have full V-Edit parameters.
The dynamic response of this function is improved.
: New positions allow even more realistic microphone placement.Improvement in sub-low frequency attack for the KICK.
ce: Accurately reproduces the whole kit resonating when the kick is played.
DIT Parameters
TDW-20_e.book 26ページ 2008年7月17日 木曜日 午前11時35分
re an instile in the IN” in the or
ot all soun
e KICKare Buzz:
ic Position
ic Size:
it Resonan
ut V-E
26
New Functions
After pressing the [INST], the [F4 (INT<>EXP)] allows you to choose from the TD-20’s internal sounds or those on the TDW-20 expansion board.
The prefix “EXP” is attached to TDW-20’s Inst Group name.
To resto[F4] wh“default
* N
For th• Sn
• M
• M
• K
Drum Instruments Parameters [INST]
Instrument Selection Abo
27
s
The dynamic response of this function is improved.
: New positions allow even more realistic microphone placement.
AT
: You can layer a tambourine, cabasa or cowbell on the Hi-Hat (Head and/or Rim)Adjusts the volume of the layered sound.
at” position can be enabled by pressing an itch or hitting a pad switch. Please refer to
itches and Pad Switches”
(p. 39).
TDW-20_e.book 27ページ 2008年7月17日 木曜日 午前11時35分
For the SNARE• Mic Position: New positions allow even more realistic
microphone placement.• Add Rim Sound: You can layer a tambourine, 909 claps
or Gate Hit sound to the RIM only.• Level: Adjusts level of the added sound.
Not all sounds have full V-Edit parameters.
You can turn the “Snare Strainer Off” by pressing an optional foot switch or hitting a “Pad Switch.” Please refer to “Using Foot Switches and Pad Switches” (p. 39).
For the TOM• Snare Buzz:
• Mic Position
For the HI-H• Add Sound
• Level:
The “Fixed Hi-Hoptional foot sw“Using Foot Sw
ch Bend (only for NEW Electronic he TDW-20)
his function, be sure there is an electronic sound ad.
IT)] and the following screen appears. Adjust the wish.
und can be controlled by your playing dynamics.
ameters are available.
ter Value
-480 – +480
d OFF, ON
-24 – +24
-31 – +31
-31 – +31
TDW-20_e.book 28ページ 2008年7月17日 木曜日 午前11時35分
28
Additional Sizzle for All Cymbals• Sizzle Type: New “BEADS” sizzle type.• Sizzle Amount: Adjusts the amount (size) of the chosen
sizzles.
Dynamic PitSounds on tBefore accessing tassigned to the p
Then press [F2 (EDparameters as you
The pitch of the so
The following par
Parame
[F1 (PITCH)]
Basic Pitch
Dynamic Ben
Bend Depth
Bend Time
[F2 (DECAY)]
Decay Time
29
up Faders
UM VOLUME” parameters with the group faders.
ADER]–[F2 (MIN VOL)]
o use them for adjusting Volume, Ambience or vels.
TDW-20_e.book 29ページ 2008年7月17日 木曜日 午前11時35分
The “MINIMUM VOLUME” function has new and improved dynamic resolution, helping you to maintain a desired sound level for specific pads and depending on your playing style. Also helping you to capture ghost notes,
Access:
Press [MIXER]–[F3 (MIN VOL)]
Use The GroAdjust the “MINIM
Access:
Press [MIXER] + [F
* You can alsMFX send le
Mixer Settings
Minimum Volume of Each Trigger Input
ent into creating new Ambience functions. The lection of 15 Room Types, 3 new Wall Types, and Mic Positions. High density resolution of these ncluding enhanced stereo presence give you reate your own. personalized drum sound
ce
Types (15)
Booth B Studio A
Basement Jazz Club
TDW-20_e.book 30ページ 2008年7月17日 木曜日 午前11時35分
30
New Individual Compressor Templates are improved.
A lot of research wresult is a new col7 new Ambience new algorithms, imore choices to c“character.”
Pad Compressor
Parameter Improvements
Parameter Value Description
Attack EMPHASIS, CRUSHEMPHASIS: Emphasizes the attack
of the sound. CRUSH: Press the attack.
Type
COMP SOFT 1 – 2, COMP MED, COMP HARD, LIMITER, EXPANDER
These change Threshold and ratio values.
Time
KICK 1 – 3, SNARE1 – 3, TOM 1 – 3, CYM 1 – 2, OTHER1 – 3
These change Attack, Hold, and Release values.
Ambien
New Room
Booth A
Studio B
31
eration the importance of Ambience Mic owing have been added.
OM screen, pressing [SHIFT] plus [F4] resets all
ons (9)
Low Floor Low
Mid Mid High
Ceiling A Ceiling B
TDW-20_e.book 31ページ 2008年7月17日 木曜日 午前11時35分
Three new wall types are: “Curtain”, “Cloth”, and “Concrete”
Taking into considpositions, the foll
When in the ROthe parameters
Rock Club Ballroom Gate
Concert Hall Sports Arena Expo Hall
[FX] Bottle [FX] City [FX] Spiral
New Wall Types (3)
Curtain Cloth Concrete
Mic Positi
Next Door
Mid Low
High
has been added for the multi-effects output
signal by +6 dB.
TI EFFECTS screen, pressing the [F5 (MFX MON)] n to JUST the multi-effects from the MASTER HONES jacks.
fects
ut Gain Parameter
cts Monitor (“solo” mode)
TDW-20_e.book 32ページ 2008年7月17日 木曜日 午前11時35分
32
A gain parameter has been added for the ambience output level.
You can boost the signal by +6 dB
When in the AMBIENCE screen pressing [F5 (AMB MON)] allows you to listen to JUST the ambience from the MASTER OUTPUT and/or PHONES jacks.
A gain parameterlevel.
You can boost the
When in the MULallows you to listeOUTPUT and/or P
New Output Gain Parameter
Ambience Monitor (“solo” mode)
Multi-Ef
New Outp
Multi-Effe
33
ws you to turn off all the patterns that may be
NC)]–[F4 (PAD PTN)]
t Parameters [KIT]
rn ON/OFF Switch
TDW-20_e.book 33ページ 2008年7月17日 木曜日 午前11時35分
A gain reduction meter has been added to this screen, allowing you to monitor the MASTER COMP as it is functioning.
Access:
Press [MASTER COMP/EQ]
This function alloassigned to a kit.
Access:
Press [KIT]–[F2 (FU
Master Compressor
Gain Reduction (GR) Meter
Drum Ki
Pad Patte
nfirm each trigger’s velocity as well as the Hi-Hat nd positional sensing on the Snare Drum and
RIMS of the TOMS and AUX.
er” shows the intervals between strokes.
l functions to create smooth rolls on cymbals or .
(TRG MON)]
the Trigger Information
TDW-20_e.book 34ページ 2008年7月17日 木曜日 午前11時35分
34
Additional pad/trigger choices have been added to the trigger list. • CY-5• RT-10 series
This screen allows you to monitor the positional sensing for the following pads/inputs:
SNARE (Head, Rim), TOM (Rim), RIDE (Bow), and AUX (Rim).
You can turn the position detection ON or OFF here.
* If you select a non-positional sensing pad, “---” appears.
Access:
Press [TRIGGER]–[F5 (ADVANCE)]–[F4 (POSI)]–Pad Select
You can visually coopen/close gaps aRide Cymbal, and
The “interval met
Interval controthe snare drum
Access:
Press [TOOLS]–[F3
Trigger Settings
Advanced Trigger Parameter Function
Checking
35
[F5] is used to change the 3 pages of copy
–[F5]–Select the source with these buttons.
TDW-20_e.book 35ページ 2008年7月17日 木曜日 午前11時35分
Now you can copy inst sets (with or without COMP/EQ), ambience, multi-effects, volume, panning and Trigger Banks from one kit to another, between the internal memory and the CompactFlash card or from the original, factory pre-set data.
Copying overwrites the data that exists in the new destination. Be careful.
In this Screen, theoptions.
COPY A screen
COPY B screen
COPY C screen
Access:
Press [COPY]–[F1]
Copy Functions
ing the Copy Target
have the choice to copy all instruments with, he COMP/EQ settings.
Tom 1, 2, 3, 4
Hi-Hat, Crash1, 2, Ride, Edge
AUX 1, 2, 3, 4
r ICON Inst
TDW-20_e.book 36ページ 2008年7月17日 木曜日 午前11時35分
36
If you want to copy trigger bank data from your original TD-20, do the following:
1. Import the backup into the expanded TD-20 (upgraded version).
2. Then save once to the CompactFlash card.
3. Now you can copy individual trigger bank settings back into the TD-20.
An instrument set consists of all instruments (every instrument assigned to a trigger input).
When SelectIn this screen, youwithout or JUST t
Trigger Bank Copy
Copying an Instrument Set
Parameter ICON Inst
KICK/SNR Kick and Snare
TOMS 1-4
CYM SET
AUX 1-4
Paramete
37
um Kit Settings
creen, press [SHIFT] and [COPY] simultaneously.
strument Settings
, press [SHIFT] and [COPY] simultaneously.
ixer Settings
en, press [SHIFT] and [COPY] simultaneously.
bience Settings
screen, press [SHIFT] and [COPY] simultaneously.
ulti-Effect Settings
CTS screen, press [SHIFT] and [COPY]
p Functions to the en
TDW-20_e.book 37ページ 2008年7月17日 木曜日 午前11時35分
In this screen, you have the choice to copy the instrument and it’s edited parameters with, without or JUST the COMP/EQ settings.
For Copying Dr
In the DRUM KIT s
For Copying In
In the INST screen
For Copying M
In the MIXER scre
For Copying Am
In the AMBIENCE
For Copying M
In the MULTI EFFEsimultaneously.
Copying an Instrument Quick JumCopy Scre
e sequencer parts, the Metronome click sound & he MASTER OUT, PHONES and/or DIRECT OUT 5
sign (OTHER)
TDW-20_e.book 38ページ 2008年7月17日 木曜日 午前11時35分
38
Now, when using multi-output configurations, the entire kit’s sound will remain in the headphones, even the sounds NOT sent to the MASTER OUTPUT jacks.
Access:
Press [SETUP]–[F2 (OUTPUT)]–[F1 (MASTER)]
When in this screen, pressing [F5 (DEFAULT)] will reset the parameters of that specific page. A confirmation screen will appear before you execute.
You can assign thMIX IN source to tto 8.
Settings for the Entire TD-20
Master Output
Output As
39
an handle mono or stereo signal.
e audio signal going to the MIX IN Jack has a click and the backing track on the Left side, you can
to merge the signals.
4 (OPTION)] – [F3 (MIX IN)]
w Function
r Value
L + R, L ONLY, R ONLY
STEREO, MONO
0 – +12
TDW-20_e.book 39ページ 2008年7月17日 木曜日 午前11時35分
One or two optional foot switches (BOSS FS-5U: sold separately) can be used with an optional cable (PCS-31: sold separately) to allow switching to a “Fixed Hi-Hat” or to turn the snare strainer “off” on the snare drum. You can also turn the ambience or multi-effects on/off. The same can be done with Pad Switches.
The “FIXED HH” and “STRAINER” status are displayed on the “DRUM KIT” screen
Access for Foot Switch Functions:
Press [SETUP]–[F3 (CONTROL)]–[F1 (FOOT SW)]
Access for Pad Switch Function:
Press [SETUP]–[F3 (CONTROL)]–[F2 (PAD SW)]
Pad switch functions are available only when using AUX 3 and AUX 4 inputs.
The MIX IN jacks c
If it occurs that thon the Right side,
use this function
Access:
Press [SETUP] – [F
Using Foot Switches and Pad Switches MIX IN ne
Paramete
Input
Mode
Gain
TDW-20_e.book 40ページ 2008年7月17日 木曜日 午前11時35分
40
You can import your original TD-20 setting to the expanded TD-20.
1. Insert your CompactFlash Card.
2. Press [CARD]–[F3 (IMPORT)].
3. Select the backup.
4. Press [F5 (IMPORT)].
Notes about importing data:• Your drum kit data will be loaded to Kits No.51 to
No.100. The TDW-20 preset kit will be loaded to No.1 to No.50
• The Program Change Number for Drum Kits is reset to the default value.
Importing Original TD-20 Data into the Expanded TD-20
41
directly from the CompactFlash memory card.
[KIT] simultaneously.
a Drum Kit from a lash
TDW-20_e.book 41ページ 2008年7月17日 木曜日 午前11時35分
You can play preset drum kits and kits from the internal memory and also those saved on a CompactFlash card without loading to a user drum kit destination. When accessing kits in this manner, Pad Patterns assigned to that particular kit will NOT function. And no editing is possible. You can immediately copy the selected kit to any user destination. When in this page, just push “copy.”
Access:
1. Press [TOOLS]–[F1 (KIT SEL)].
2. Press [F1]–[F3] to choose kit.[F1 (TD-20)]: TD-20 preset kits[F2 (TDW-20)]: TDW-20 preset kits[F3 (CARD)]: Backup kit saved in CompactFlash
You can play a kit
Access:
Press [SHIFT] and
Other Functions
The Kit Selection Function
ChoosingCompactF
2 50s King SR3 GT Maple S4 GT Maple SR5 Piccolo S6 Piccolo SR7 12"Cmpact S8 12"Cmpact SR9 10"Cmpact S0 10"Cmpact SR1 Skanky2 S2 Skanky2 SR3 StlPhonic S4 StlPhonic SR5 50sKingMt S6 50sKingMt SR7 WhiteAsh S8 WhiteAsh SR9 Popcorn S0 Popcorn SR
P SNARE PROCESSED
1 PrcsWood S2 PrcsWood SR3 PrcsMetal S4 PrcsMetal SR5 PrcsElec1 S
. Name
656 PrcsElec1 SR657 PrcsElec2 S658 PrcsElec2 SR659 PrcsXStik S660 PrcsNoise S661 DynaFilter S662 ClscFat1 S663 ClscFat1 SR664 ClscFat2 S665 ClscFat2 SR666 SoundFX1 S667 SoundFX2 S668 SoundFX3 S669 SoundFX4 S670 SoundFX5 S671 Distorted1 S672 Distorted2 S673 Wood XStik674 Steel XStik675 Brass XStik676 80sMtl XStik677 50sKingXStik678 WhtAsh XStik679 Light XStik680 Lo-Fi XStik
No. Name
TDW-20_e.book 42ページ 2008年7月17日 木曜日 午前11時35分
63636363636363636464646464646464646465
EX6565656565
No
42
Appendices
Drum Instrument ListNo. Name
EXP KICK562 22"BirchLo K563 22"BirchHi K564 23"D-Maple K565 22"NCMaple K566 22"LwgVntg K567 22"RokVntg K568 22"PKMaple K569 22"SnrVntg K570 24"VLite K571 22"Premium K572 22"BirchWetK573 22"GT Vntg K574 22"LooseHd K575 20"TightHd K576 20"GT Open K577 20"BigBand K578 18"Combo K579 18"BeBopLo K580 18"BeBopHi K581 Ambience K
EXP KICK PROCESSED582 Tight1 K583 Tight2 K
584 Tight3 K585 Tight4 K586 Tight5 K587 Tight6 K588 Solid1 K589 Solid2 K590 Solid3 K591 Wild K592 Mondo K593 Reverb K594 Distorted K595 BreakBeats K596 Woofer K597 FX Stomp K598 FX Chest K599 FX Handle K600 FX Door K
EXP KICK ELEC601 ClscElec7 K602 ClscElec8 K603 ClscElec9 K604 808Attack K605 808Low K606 909Power K607 909Low K
No. Name608 AnalogQ1 K609 AnalogQ2 K610 AnalogQ3 K611 Synthy K612 Filter1 K613 Filter2 K614 Filter3 K615 Filter4 K616 Jungle K617 FX Elec1 K618 FX Elec2 K619 FX Elec3 K620 FX Elec4 K
EXP SNARE621 CustomWoodS622 CustomWoodSR623 80s Metal S624 80s Metal SR625 Bronze S626 Bronze SR627 CraftStl S628 CraftStl SR629 OpenBrass S630 OpenBrass SR631 50s King S
No. Name
43
8 13"P-Crsp HE9 Distorted HB0 Distorted HE1 Lo-Fi HH2 808Chick HH3 909Power HH4 Impulse HH5 Super-Q HH6 DistJingleHH7 MtlCrasherHH8 Jingle HH9 Beads HH0 Ratchet HH
EXP CRASH
1 15"PaperCrBw2 15"PaperCrEg3 16"PoP CrBw4 16"PoP CrEg5 18"PoP CrBw6 18"PoP CrEg7 17"DarK CrBw8 17"DarK CrEg9 18"DarK CrBw0 18"DarK CrEg1 18"JazZ CrBw2 18"JazZ CrEg
EXP SPLASH
3 4"Paper SpBw4 4"Paper SpEg5 6"Splaz SpBw
. Name
796 6"Splaz SpEg797 10"UF SpBw798 10"UF SpEg799 10"ChinaSpBw800 10"ChinaSpEg
EXP CHINA
801 13"Latin Bw802 13"Latin Eg803 14"Trash Bw804 14"Trash Eg805 20"CB Low Bw806 20"CB Low Eg
EXP STACKED CYMBAL
807 16"Stackd Bw808 16"Stackd Eg809 18"Stackd Bw810 18"Stackd Eg
EXP RIDE
811 20"JazZ Rd812 20"JazZ RdBl813 20"JazZ RdEg814 20"HvyDKRd815 20"HvyDKRdBl816 20"HvyDKRdEg817 20"ASpecRd818 20"ASpecRdBl819 20"ASpecRdEg820 20"KSpecRd821 20"KSpecRdBl822 20"KSpecRdEg
No. Name
TDW-20_e.book 43ページ 2008年7月17日 木曜日 午前11時35分
EXP SNARE ELEC681 ClscElec6 S682 ClscElec7 S683 ClscElec8 S684 ClscElec9 S685 808Power S686 808Power SR687 909Power S688 909Power SR689 909Dist S690 909Reverb S
EXP TOM691 8"NCMpl T1692 8"NCMpl T1R693 10"NCMpl T2694 10"NCMpl T2R695 12"NCMpl T3696 12"NCMpl T3R697 14"NCMpl T4698 14"NCMpl T4R699 16"NCMpl T5700 16"NCMpl T5R701 8"PKJaz T1702 8"PKJaz T1R703 10"PKJaz T2704 10"PKJaz T2R705 12"PKJaz T3706 12"PKJaz T3R707 13"PKJaz T4708 13"PKJaz T4R
No. Name709 16"PKJaz T5710 16"PKJaz T5R711 10"Rock T1712 10"Rock T1R713 12"Rock T2714 12"Rock T2R715 14"Rock T3716 14"Rock T3R717 16"Rock T4718 16"Rock T4R719 18"Rock T5720 18"Rock T5R721 8"Pop T1722 8"Pop T1R723 10"Pop T2724 10"Pop T2R725 12"Pop T3726 12"Pop T3R727 13"Pop T4728 13"Pop T4R729 16"Pop T5730 16"Pop T5R731 8"Antiq T1732 8"Antiq T1R733 10"Antiq T2734 10"Antiq T2R735 12"Antiq T3736 12"Antiq T3R737 13"Antiq T4738 13"Antiq T4R739 16"Antiq T5
No. Name740 16"Antiq T5R
EXP TOM ELEC741 ClscElec5 T1742 ClscElec5 T2743 ClscElec5 T3744 ClscElec5 T4745 ClscElec6 T1746 ClscElec6 T2747 ClscElec6 T3748 ClscElec6 T4749 ClscElec7 T1750 ClscElec7 T2751 ClscElec7 T3752 ClscElec7 T4753 ClscElec8 T1754 ClscElec8 T2755 ClscElec8 T3756 ClscElec8 T4757 ClscElec9 T1758 ClscElec9 T2759 ClscElec9 T3760 ClscElec9 T4
EXP HI-HAT761 14"CstmDK HB762 14"CstmDK HE763 14"Medium HB764 14"Medium HE765 13"KZComb HB766 13"KZComb HE767 13"P-Crsp HB
No. Name76767777777777777777777778
787878787878787878797979
797979
No
3 ElecRide Eg4 Revrs Kick5 Revrs Snare6 Revrs Crash27 Revrs China28 AcousGuitar9 FingerBass0 SlapBass
EXP OFF
1 EXP Off
. Name
TDW-20_e.book 44ページ 2008年7月17日 木曜日 午前11時35分
44
823 20"VntZ Rd824 20"VntZ RdBl825 20"VntZ RdEg826 19"JzCrsRd827 19"JzCrsRdBl828 19"JzCrsRdEg829 19"P-CrsRd830 19"P-CrsRdBl831 19"P-CrsRdEg
EXP PERCUSSION832 Timbale2Hi833 Timbale2HiRm834 Timb2HiPaila835 Timbale2Lo836 Timbale2LoRm837 Timb2LoPaila838 Pandeiro2839 Pande2 Slap840 Pande2 Close841 Pande2 Edge842 Pande2 Roll1843 Pande2 Roll2844 Caixa845 Caixa Rim846 Cajon2 Bass847 Cajon2 Close848 Cajon2 Open849 Cajon2 Slap850 Bendir851 Darabuka Dom852 Darabuka Tak
No. Name853 AnkleBeads854 AfricaJingle855 Cabasa2856 Tambourine4857 TambStick858 TambShake859 Sagat Close860 Sagat Open861 MetalCrasher862 ConcertBD2863 ConcertBD2mt864 LargeGong865 Timpani2 C866 Timpani2 G867 HiraTaiko868 HiraTaikoRim869 YaguraTaiko870 YaguraTaikoR871 NagodoTaiko872 NagadoTaikoR
EXP SFX873 Tick874 Chick875 Random876 ReverbSlap877 Hammer878 Anvil879 MetalDoor880 MetalPhase881 RvsMtlFaze882 WhiteLazer
No. Name883 CosmicWater884 CosmicDrip885 CosmicClaps886 CosmicChirp887 Falling888 FlyAway889 BounceDown890 TimeTunnel1891 TimeTunnel2892 SpaceTrip893 Growl894 Ripping895 SpaceAlien896 SpaceWarp897 Shake898 ShakeDown899 Gear900 GearLong
EXP OTHER901 Group Claps902 High Claps903 Mid Claps904 Low Claps905 Hi-Q Claps906 Reverb Claps907 IronWhip908 Ratchet909 Drawer910 Explosion911 ElecRide912 ElecRide Bl
No. Name9191919191919192
92
No
45
TDW-20_e.book 45ページ 2008年7月17日 木曜日 午前11時35分
About Snare/Tom InstrumentsThe last letter of each instrument name means the sound of head shot, or rim shot.
(Example)S: head sound of SnareSR: rim sound of SnareT1: head sound of Tom 1T1R: rim sound of Tom 1
About Cymbal InstrumentsThe last letter of each instrument name means the sound of bow shot, edge shot, or bell shot.
(Example)HB: bow sound of hi-hatHE: edge sound of hi-hatCrBw: bow sound of crashCrEg: edge sound of crashRd: bow sound of rideRdBl: bell sound of rideRdEg: edge sound of ride
About Electronic InstrumentsElectronic sounds can produce VERY low-frequencies when using the Dynamic Pitch Bend function.Please be careful about the volume of your sound system, speakers or headphones when using this function.
4
ck
ub
ntRock
c
ver
eJazz
lue
Jungle *1 Loop
l
op
ouse
Dry
omper
S vs DJ
xCity
lay
d Out
erc
rums
an
<GER *1 1Shot, Tap
Kit Name RemarkPad
Pattern
TDW-20_e.book 46ページ 2008年7月17日 木曜日 午前11時35分
6
Preset Drum Kit List
No. Kit Name RemarkPad
Pattern1 TDW-20
2 50s King
3 ControlRoom
4 Metal Core
5 FunkGroove
6 40s BeBop
7 >processed>>
8 Cajon
9 Melodious *1 Tap
10 Premium
11 SwingJazz
12 BluesRock
13 Dry Studio
14 2HH House
15 TechFusion
16 LetItBeat
17 neotype *1 1Shot, Tap
18 JazzBop
19 RawBeat
20 VintageRock
21 D-N-B *1 Loop
22 GarageRock
23 80s Funk
24 Cashmirror
25 BREAKs
26 90s Ro
27 JazzCl
28 Jive
29 Ambie
30 Cosmi
31 Crosso
32 Vintag
33 Coolth
34 BulletB
35 Funky
36 Natura
37 LA BeB
38 MBs H
39 Bronze
40 DarkC
41 DRUM
42 Gated
43 RotoF
44 PopDe
45 1985
46 Space
47 BrazilP
48 LatinD
49 InVasi
50 FLA>n
No.
47
Shallow
Ballad *1 Loop
Raspy
PopReggae *1 Loop
BrassBiggie
WetBooth *1 Loop
70s Record
Lite
Mellow
Stadium
TiteOctas
90s Power
FxJungle *1 Tap
Tekno
TR-808 *1 Loop
TR-909
Hex< >Drum *1 Loop
Cosmosis
Technology
OrchPerc *1 Tap
Survivor
Latin Toys
African Perc
Tabla/Sitar *1 Loop, Tap
UserKit *3
Kit Name RemarkPad
Pattern
TDW-20_e.book 47ページ 2008年7月17日 木曜日 午前11時35分
51 VPro
52 Slamin' *1 Loop
53 METAL
54 JazzCombo
55 OverDrive *1 Tap
56 Titanium
57 RotoKit *1 Loop
58 UNIVERSE
59 Skanky
60 Brushes *2
61 Spark!
62 >>GT>>
63 Antique
64 =BreakBeats=
65 Studio
66 Groover *1 Loop
67 Mallet
68 Drumline
69 JazzGig *1 Loop
70 Airtime
71 Sploink!
72 Boogaloo
73 Zeppy
74 Arena
75 Maple
No. Kit Name RemarkPad
Pattern76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
No.
TDW-20_e.book 48ページ 2008年7月17日 木曜日 午前11時35分
48
About the Pad PatternsLoop: Loop Pattern: Playback starts when the pad to which
the pattern is assigned is struck, and stops when hit again.
Tap: Tap Pattern: Chords or melodies are played once each time the pad to which the pattern is assigned is struck.
1Shot: One-Shot Pattern: Playback (one time only) starts when the pad to which the pattern is assigned is struck.
Remarks
*1: A Pattern is assigned (Loop, One-Shot, Tap).
* To stop a Loop pattern that is playing, either strike the pad used to play the Loop pattern once again, or press the TD-20’s [STOP] button.
* To turn off all pad patterns assigned to a drum kit at one time, set the PadPtn Master SW setting to OFF. This is on a “per-kit” basis.Procedure: Press [KIT] - [F2 (FUNC)] - [F4 (PAD PTN)], then set PadPtn Master SW to “ALL PADS OFF.”
*2: Brushes can be used.
*3: Parameters including volume etc. are set to standard values. Use this when creating a kit from scratch.
004/108/EC.
For EU Countries
her reproductive harm, including lead.
For C.A. US (Proposition 65)
TDW-20_e.book 50ページ 2008年7月17日 木曜日 午前11時35分
50
This product complies with the requirements of EMC Directive 2
WARNINGThis product contains chemicals known to cause cancer, birth defects and ot
53
thorized Roland
MEXICOCasa Veerkamp, s.a. de c.v.Av. Toluca No. 323, Col. Olivar de los Padres 01780 Mexico D.F. MEXICOTEL: (55) 5668-6699
NICARAGUABansbach Instrumentos Musicales NicaraguaAltamira D'Este Calle Principalde la Farmacia 5ta.Avenida1 Cuadra al Lago.#503Managua, NicaraguaTEL: (505)277-2557
PANAMASUPRO MUNDIAL, S.A.Boulevard Andrews, Albrook, Panama City, REP. DE PANAMATEL: 315-0101
PARAGUAYDistribuidora De Instrumentos MusicalesJ.E. Olear y ESQ. Manduvira Asuncion PARAGUAYTEL: (595) 21 492147
PERUAudionetDistribuciones Musicales SACJuan Fanning 530MirafloresLima - PeruTEL: (511) 4461388
TRINIDADAMR LtdGround FloorMaritime PlazaBarataria Trinidad W.I.TEL: (868) 638 6385
Ltda.80 Sala Bial San Joselo - SP, BRAZIL 5666
cy II S.A.0-1739, 4th Floortro, CHILE540
l Ltda. A 41 Bododega 9mbia529
Ach Instrumentos
, Apartado
A RICA
sic Center Inc.
erland Antilles66
N REPUBLICernando Giraldez Central No.3lao,
ublic305
ECUADORMas MusikaRumichaca 822 y ZarumaGuayaquil - EcuadorTEL:(593-4)2302364
EL SALVADOROMNI MUSIC75 Avenida Norte y Final Alameda Juan Pablo II, Edificio No.4010 San Salvador, EL SALVADORTEL: 262-0788
GUATEMALACasa InstrumentalCalzada Roosevelt 34-01,zona 11Ciudad de GuatemalaGuatemalaTEL:(502) 599-2888
HONDURASAlmacen Pajaro Azul S.A. de C.V.BO.Paz Barahona3 Ave.11 Calle S.OSan Pedro Sula, HondurasTEL: (504) 553-2029
MARTINIQUEMusique & SonZ.I.Les Mangle97232 Le LamantinMartinique F.W.I.TEL: 596 596 426860
Gigamusic SARL10 Rte De La Folie97200 Fort De FranceMartinique F.W.I.TEL: 596 596 715222
TDW-20_e.book 53ページ 2008年7月17日 木曜日 午前11時35分
Information When you need repair service, call your nearest Roland Service Center or audistributor in your country as shown below.
EGYPTAl Fanny Trading Office9, EBN Hagar Al Askalany Street,ARD E1 Golf, Heliopolis, Cairo 11341, EGYPTTEL: (022)-418-5531
REUNIONMaison FO - YAM Marcel25 Rue Jules Hermann,Chaudron - BP79 97 491Ste Clotilde Cedex,REUNION ISLANDTEL: (0262) 218-429
SOUTH AFRICAT.O.M.S. Sound & Music (Pty)Ltd.2 ASTRON ROAD DENVER JOHANNESBURG ZA 2195, SOUTH AFRICATEL: (011)417 3400
Paul Bothner(PTY)Ltd.Royal Cape Park, Unit 24Londonderry Road, Ottery 7800 Cape Town, SOUTH AFRICATEL: (021) 799 4900
AFRICA THAILANDTheera Music Co. , Ltd.100-108 Soi Verng Nakornkasem, New Road,Sumpantawongse, Bangkok 10100 THAILANDTEL: (02) 224-8821
AUSTRALIA/NEW ZEALAND Roland CorporationAustralia Pty.,Ltd. 38 Campbell AvenueDee Why West. NSW 2099AUSTRALIA
For AustraliaTel: (02) 9982 8266For New ZealandTel: (09) 3098 715
ARGENTINAInstrumentos Musicales S.A.Av.Santa Fe 2055 (1123) Buenos AiresARGENTINATEL: (011) 4508-2700
BARBADOSA&B Music Supplies LTD12 Webster Industrial ParkWildey, St.Michael, BarbadosTEL: (246)430-1100
AUSTRALIA/NEW ZEALAND
CENTRAL/LATINAMERICA
CHINARoland Shanghai Electronics Co.,Ltd.5F. No.1500 Pingliang Road Shanghai 200090, CHINATEL: (021) 5580-0800
Roland Shanghai Electronics Co.,Ltd.(BEIJING OFFICE)10F. No.18 3 Section Anhuaxili Chaoyang District Beijing 100011 CHINATEL: (010) 6426-5050
HONG KONGTom Lee Music Co., Ltd. Service Division22-32 Pun Shan Street, Tsuen Wan, New Territories, HONG KONGTEL: 2415 0911
Parsons Music Ltd. 8th Floor, Railway Plaza, 39 Chatham Road South, T.S.T,Kowloon, HONG KONGTEL: 2333 1863
INDIARivera Digitec (India) Pvt. Ltd.411, Nirman Kendra Mahalaxmi Flats Compound Off. Dr. Edwin Moses Road, Mumbai-400011, INDIATEL: (022) 2493 9051
INDONESIAPT Citra IntiRamaJl. Cideng Timur No. 15J-15O Jakarta PusatINDONESIATEL: (021) 6324170
ASIA KOREACosmos Corporation1461-9, Seocho-Dong,Seocho Ku, Seoul, KOREATEL: (02) 3486-8855
MALAYSIARoland Asia Pacific Sdn. Bhd.45-1, Block C2, Jalan PJU 1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, MALAYSIATEL: (03) 7805-3263
VIET NAM Suoi Nhac Company, Ltd 370 Cach Mang Thang Tam St.Dist.3, Ho Chi Minh City, VIET NAMTEL: 9316540
PHILIPPINESG.A. Yupangco & Co. Inc.339 Gil J. Puyat AvenueMakati, Metro Manila 1200,PHILIPPINESTEL: (02) 899 9801
SINGAPORESWEE LEE MUSIC COMPANY PTE. LTD.150 Sims Drive,SINGAPORE 387381TEL: 6846-3676
TAIWANROLAND TAIWAN ENTERPRISE CO., LTD.Room 5, 9fl. No. 112 Chung Shan N.Road Sec.2, Taipei, TAIWAN, R.O.C.TEL: (02) 2561 3339
BRAZILRoland Brasil Rua San Jose, 7Parque IndustrCotia - Sao PauTEL: (011) 4615
CHILEComercial FanRut.: 96.919.42Nataniel Cox #Santiago - CenTEL: (02) 688-9
COLOMBIACentro MusicaCra 43 B No 25Medellin, ColoTEL: (574)3812
COSTA RICJUAN BansbaMusicalesAve.1. Calle 1110237,San Jose, COSTTEL: 258-0211
CURACAOZeelandia MuOrionweg 30Curacao, NethTEL:(305)59268
DOMINICAInstrumentos FCalle ProyectoEns.La EsperilSanto DomingDominican RepTEL:(809) 683 0
As of Oct. 1, 2007 (ROLAND)
CANADA Roland Canada Ltd.(Head Office)5480 Parkwood Way Richmond B. C., V6V 2M4 CANADA TEL: (604) 270 6626
Roland Canada Ltd.(Toronto Office)170 Admiral BoulevardMississauga On L5T 2N6 CANADA TEL: (905) 362 9707
U. S. A. Roland Corporation U.S.5100 S. Eastern AvenueLos Angeles, CA 90040-2938,U. S. A.TEL: (323) 890 3700
NORTH AMERICAOMANTALENTZ CENTRE L.L.C.Malatan House No.1Al Noor Street, RuwiSULTANATE OF OMANTEL: 2478 3443
QATARAl Emadi Co. (Badie Studio & Stores)P.O. Box 62, Doha, QATARTEL: 4423-554
SAUDI ARABIAaDawliah Universal Electronics APLBehind Pizza InnPrince Turkey StreetaDawliah Building,PO BOX 2154,Alkhobar 31952SAUDI ARABIATEL: (03) 8643601
SYRIATechnical Light & Sound CenterRawda, Abdul Qader Jazairi St.Bldg. No. 21, P.O.BOX 13520, Damascus, SYRIATEL: (011) 223-5384
TURKEY ZUHAL DIS TICARET A.S.Galip Dede Cad. No.37Beyoglu - Istanbul / TURKEYTEL: (0212) 249 85 10
U.A.E.Zak Electronics & Musical Instruments Co. L.L.C.Zabeel Road, Al Sherooq Bldg., No. 14, Ground Floor, Dubai, U.A.E.TEL: (04) 3360715
umaytha 931, Manama
r.Shariyati Ave.,e Mirdamad
4169
spoon & Sons
Hashnia St.RAEL6
CO. LTD. USIC
ORDAN6
AL-YOUSIFI
ce Centerfat) 13002
29
t., Chahine , P.O.Box: 16-
N1
AST
TDW-20_e.book 54ページ 2008年7月17日 木曜日 午前11時35分
54
IRELANDRoland IrelandG2 Calmount Park, Calmount Avenue, Dublin 12Republic of IRELANDTEL: (01) 4294444
ITALYRoland Italy S. p. A. Viale delle Industrie 8, 20020 Arese, Milano, ITALYTEL: (02) 937-78300
NORWAYRoland Scandinavia Avd. Kontor NorgeLilleakerveien 2 Postboks 95 Lilleaker N-0216 Oslo NORWAYTEL: 2273 0074
POLANDROLAND POLSKA SP. Z O.O.UL. Gibraltarska 4.PL-03 664 Warszawa POLANDTEL: (022) 679 4419
PORTUGALRoland Iberia, S.L.Portugal OfficeCais das Pedras, 8/9-1 Dto4050-465, Porto, PORTUGALTEL: 22 608 00 60
ROMANIAFBS LINESPiata Libertatii 1,535500 Gheorgheni, ROMANIATEL: (266) 364 609
RUSSIAMuTekDorozhnaya ul.3,korp.6117 545 Moscow, RUSSIA TEL: (095) 981-4967
URUGUAYTodo Musica S.A.Francisco Acuna de Figueroa 1771C.P.: 11.800 Montevideo, URUGUAYTEL: (02) 924-2335
VENEZUELAInstrumentos Musicales Allegro,C.A.Av.las industrias edf.Guitar import#7 zona Industrial de TurumoCaracas, VenezuelaTEL: (212) 244-1122
AUSTRIARoland ElektronischeMusikinstrumente HmbH.Austrian OfficeEduard-Bodem-Gasse 8,A-6020 Innsbruck, AUSTRIATEL: (0512) 26 44 260
BELGIUM/FRANCE/HOLLAND/LUXEMBOURGRoland Central Europe N.V.Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUMTEL: (014) 575811
CROATIAART-CENTARDegenova 3.HR - 10000 ZagrebTEL: (1) 466 8493
EUROPE
CZECH REP.CZECH REPUBLIC DISTRIBUTOR s.r.oVoctárova 247/16CZ - 180 00 PRAHA 8,CZECH REP.TEL: (2) 830 20270
DENMARK Roland Scandinavia A/SNordhavnsvej 7, Postbox 880,DK-2100 CopenhagenDENMARK TEL: 3916 6200
FINLANDRoland Scandinavia As, Filial FinlandElannontie 5FIN-01510 Vantaa, FINLANDTEL: (0)9 68 24 020
GERMANY Roland Elektronische Musikinstrumente HmbH.Oststrasse 96, 22844 Norderstedt, GERMANY TEL: (040) 52 60090
GREECE/CYPRUSSTOLLAS S.A.Music Sound Light155, New National RoadPatras 26442, GREECETEL: 2610 435400
HUNGARYRoland East Europe Ltd.Warehouse Area ‘DEPO’ Pf.83H-2046 Torokbalint, HUNGARYTEL: (23) 511011
SLOVAKIADAN Acoustic s.r.o. Povazská 18.SK - 940 01 Nové ZámkyTEL: (035) 6424 330
SPAINRoland Iberia, S.L. Paseo García Faria, 33-35 08005 Barcelona SPAINTEL: 93 493 91 00
SWEDEN Roland Scandinavia A/S SWEDISH SALES OFFICEDanvik Center 28, 2 tr. S-131 30 Nacka SWEDEN TEL: (0)8 702 00 20
SWITZERLANDRoland (Switzerland) AG Landstrasse 5, Postfach,CH-4452 Itingen, SWITZERLANDTEL: (061) 927-8383
UKRAINEEURHYTHMICS Ltd.P.O.Box: 37-a.Nedecey Str. 30UA - 89600 Mukachevo, UKRAINETEL: (03131) 414-40
UNITED KINGDOM Roland (U.K.) Ltd.Atlantic Close, Swansea Enterprise Park, SWANSEASA7 9FJ, UNITED KINGDOMTEL: (01792) 702701
BAHRAINMoon StoresNo.1231&1249 RBuilding Road 3339 BAHRAINTEL: 17 813 942
IRANMOCO INC.No.41 Nike St., DRoberoye CerahTehran, IRANTEL: (021)-2285-
ISRAELHalilit P. GreenLtd.8 Retzif Ha'alia Tel-Aviv-Yafo ISTEL: (03) 682366
JORDANMUSIC HOUSEFREDDY FOR MP. O. Box 922846Amman 11192 JTEL: (06) 569269
KUWAITEASA HUSAIN& SONS CO.Al-Yousifi ServiP.O.Box 126 (SaKUWAITTEL: 00 965 8029
LEBANONChahine S.A.L.George Zeidan SBldg., Achrafieh5857Beirut, LEBANOTEL: (01) 20-144
MIDDLE E
55555555
この機器を正しくお使いいただくために、ご使用前に「安全上のご注意」(P.56)と「使用上のご注意」(P.59)をよくお読みください。また、この機器の優れた機能を十分ご理解いただくためにも、取扱説明書をよくお読みください。取扱説明書は必要なときにすぐに見ることができるよう、手元に置いてください。
製品の仕様および内容は、改良のため予告なく変更することがあります。
©2008 ローランド株式会社
本書の一部、もしくは全部を無断で複写・転載することを禁じます。
TDW-20_j.book 55ページ 2008年7月17日 木曜日 午前11時31分
制(必ずすること)を表わしています。 強制内容は、● の中に描かれています。 合は、「電源プラグをコンセントから抜を表わしています。
意(危険、警告を含む)を表わしていま
注意内容は、 の中に描かれています。 合は、「一般的な注意、警告、危険」をいます。
止(してはいけないこと)を表わしてい
禁止内容は、 の中に描かれています。 合は、「分解禁止」を表わしています。
TDW-20_j.book 56ページ 2008年7月17日 木曜日 午前11時31分
するには
の例
● は、強具体的な左図の場くこと」
は、注す。 具体的な左図の場表わして
は、禁ます。 具体的な左図の場
55556666
安全上のご注意
火災・感電・傷害を防止
取扱いを誤った場合に、使用者が傷害を負う危険が想定される場合および物的損害のみの発生が想定される内容を表わしています。 ※物的損害とは、家屋・家財および家畜・ペットにかかわる拡大損害を表わしています。
取扱いを誤った場合に、使用者が死亡または重傷を負う可能性が想定される内容を表わしています。
警告
注意
注意の意味について 警告と 図記号
55557777
付けた TD-20に、異物(燃えやすい金など)や液体(水、ジュースなど)いでください。
.........................................................................................
家庭で使用する場合、お子様の取り扱注意してください。必ず大人のかたしてあげてください。
.........................................................................................
したり、この機器に強い衝撃を与えな
.........................................................................................
り付ける前に、TD-20の電源を切ってンセントから外してください。
.........................................................................................
い
警告
TDW-20_j.book 57ページ 2008年7月17日 木曜日 午前11時31分
● この機器を分解したり(取扱説明書に記載されている指示(P.67)を除く)、改造したりしないでください。
........................................................................................................................
● 修理/部品の交換などで、取扱説明書に書かれていないことは、絶対にしないでください。必ずお買い上げ店またはローランドお客様相談センターに相談してください。
........................................................................................................................
● 次のような場所に設置しないでください。○ 温度が極端に高い場所(直射日光の当たる場所、
暖房機器の近く、発熱する機器の上など)○ 水気の近く(風呂場、洗面台、濡れた床など)や
湿度の高い場所○ 湯気や油煙が当たる場所○ 塩害の恐れがある場所○ 雨に濡れる場所○ ほこりや砂ぼこりの多い場所○ 振動や揺れの多い場所
........................................................................................................................
● この機器を取りもの、硬貨、針を絶対に入れな
...............................
● お子様のいるごいやいたずらにが、監視/指導
...............................
● この機器を落といでください。
...............................
● TDW-20を取電源プラグをコ
...............................
以下の指示を必ず守ってくださ
警告
TDW-20_j.book 58ページ 2008年7月17日 木曜日 午前11時31分
55558888
● この機器の上に乗ったり、機器の上に重いものを置かないでください。
........................................................................................................................
● 指定の機器(TD-20)だけに取り付け、取り付け時には指定されたネジだけを外してください。
........................................................................................................................
● 取り外したネジや付属の固定用具は、小さなお子様が誤って飲み込んだりすることのないようお子様の手の届かないところへ保管してください。
........................................................................................................................
注意
55559999
についてッシュの失われた記憶内容の修復に関しましてご容赦願います。
をするときは、この機器が入っていたダンボールたは同等品で梱包してください。
ていた梱包箱や緩衝材を廃棄する場合、各地域のに従って行ってください。
TDW-20_j.book 59ページ 2008年7月17日 木曜日 午前11時31分
の注意パクトフラ補償を含め
や引っ越し緩衝材、ま
機器が入っの分別基準
使用上のご注意設置について● 直射日光の当たる場所や、発熱する機器の近く、閉め切った車内などに放置しないでください。変形、変色することがあります。
● 極端に温湿度の違う場所に移動すると、水滴がつく(結露)ことがあります。そのまま使用すると故障の原因になりますので、数時間放置し、結露がなくなってから使用してください。
修理について
● お客様がこの機器を分解(取扱説明書に記載されている指示(P.67)を除く)、改造された場合、以後の性能について保証できなくなります。また、修理をお断りする場合もあります。
● 修理に出される場合、記憶した内容が失われることがあります。大切な記憶内容は、メモリー・カードに保存するか、記憶内容をメモしておいてください。修理するときには記憶内容の保存に細心の注意を払っておりますが、メモリー部の故障などで記憶内容が復元できない場合もあります。失われた記録内容の修復に関しましては、補償も含めご容赦願います。
● 当社では、この製品の補修用性能部品(製品の機能を維持するために必要な部品)を、製造打切後 6年間保有しています。この部品保有期間を修理可能の期間とさせていただきます。なお、保有期間が経過した後も、故障箇所によっては修理可能の場合がありますので、お買い上げ店、またはローランドお客様相談センターにご相談ください。
その他● コンは、
● 輸送箱と
● このゴミ
てパンション・ボード TDW-20(以下、「本製品」ローランドの正規販売店からお買い上げになったに含まれる音色は、ローランド株式会社から、お音楽制作、公共の場での演奏、放送などの商用目を許諾したものであって、著作権を譲渡したもの。
なる追加料金を支払うこともなく、本製品に含ま色を、商用あるいは非商用目的の録音に使用できお客様が本製品を使用して音楽の録音を行う際にご注意ください。
るいかなる録音物も、そのままの状態であれ、いって再構成、ミキシング、フィルター加工、再合その他の編集作業をした状態であれ、ローランド可なく、他の製品に含めたり再販売するために複とを禁止します。また、本製品に含まれるいかなく贈与、取引、貸与、賃貸、再発行、再配布、再禁止します。
の音色は音楽制作の範囲でお使いいただくようおして、本製品の音色はお客様ご自身の個人的使用お使いください。本製品の音色データの複製・複。
TDW-20_j.book 60ページ 2008年7月17日 木曜日 午前11時31分
66660000
カードをお使いになる前に
コンパクトフラッシュ・カードの取り扱い
● コンパクトフラッシュは精密な電子部品で作られていますので、取り扱いについては次の点に注意してください。○ 静電気による破損を防ぐため、取り扱う前に身体に帯電して
いる静電気を放電しておく。○ 端子部に手や金属で触れない。○ 曲げたり、落としたり、強い衝撃を与えたりしない。○ 直射日光の当たる場所や、閉め切った自動車の中などに放置
しない。(保存温度:-25 度~85 度)○ 水に濡らさない。○ 分解や改造をしない。
● CompactFlash(コンパクトフラッシュ)および は米国
SanDisk 社の商標であり、CFA(CompactFlashAssociation)にライセンスされています。
● ローランド株式会社は、CompactFlash ™およびCF ロゴ
( )のライセンシーとして認定されています。
著作権につい● お客様がエクスといいます)を時点で、本製品客様に対して、的のための使用ではありません
お客様は、いかれるあらゆる音ます。ただし、は、以下のこと
本製品に含まれかなる手段によ成、加工処理、の書面による許製・複写するこる音も、許可な販売することを
従って、本製品願いします。その目的の範囲で写は禁止します
..............................................................74ラメーター[INST]................................. 74の選択 ......................................................... 74パラメーター............................................... 74定 ................................................................ 77・インプット の(MINIMUM VOLUME)設定............... 77コンプレッサー......................................... 78コンプレッサーのテンプレート改良 ....... 78.................................................................... 78oom Type(15種類)............................. 78all Type(3種類)................................... 79sition(計 9種類)..................................... 79ン・パラメーター追加 .............................. 80ンスのプレビュー...................................... 80クト ............................................................ 80ン・パラメーターの追加 .......................... 80フェクトのプレビュー .............................. 80ンプレッサー............................................. 81リダクション(GR)メーター................ 81トのパラメーター[KIT]......................... 81パターン機能のオン/オフ ...................... 81
TDW-20_j.book 62ページ 2008年7月17日 木曜日 午前11時31分
.............ストのパインストV-EDITサーの設トリガー最小音量ドごとのパッド・ビエンス新しいR新しいWMic Po出力ゲイアンビエチエフェ出力ゲイマルチエター・コゲイン・ム・キッパッド・
66662222
もくじ
安全上のご注意 ............................................................56
使用上のご注意 ............................................................59
TD-20への TDW-20 の取り付け............................64重要:取り付け前にご確認ください ..............................64データのバックアップを保存する ..................................66TDW-20 を取り付ける...................................................67付属のコンパクトフラッシュでTD-20 をバージョン・アップする................................69
主な特長........................................................................70ドラム・キットの構成 .....................................................72
新機能イン
ミキ
パッ
アン
マル
マス
ドラ
66663333
TDW-20_j.book 63ページ 2008年7月17日 木曜日 午前11時31分
トリガー・パラメーターの設定......................................82アドバンスト・トリガー・パラメーターの追加....82各パッドのトリガー情報の表示...............................82
コピー機能.........................................................................83トリガー・バンクのコピー.......................................84インスト・セットのコピー.......................................84インストのコピー......................................................85コピー画面へのジャンプ...........................................85
TD-20 全体の設定...........................................................86マスター出力..............................................................86その他のソースの出力先...........................................86フット・スイッチ/パッド・スイッチの設定........87MIX IN ジャックの設定............................................87
バージョン・アップ前のバックアップ・データのインポート ..............................88その他の機能.....................................................................89キット・セレクション機能.......................................89バックアップからのキット選択...............................89
資料................................................................................90ドラム・インスト・リスト..............................................90プリセット・ドラム・キット・リスト..........................94
フラッシュ・カードについてトフラッシュは、TD-20のバージョン・アップ、パソコンなどの機器では使用しないでくださ
のバックアップり付け前に、現在お使いのデータをコンパクトフしてください。ップを行うと、TD-20にあるデータや設定は、す。必要なデータや設定は、コンパクトフラッおいてください。TD-20のデータや設定を付属ラッシュに保存する場合は、必ず TD-20の電源とで、メモリー・カード・スロットに挿入してくコンパクトフラッシュをメモリー・カードスロッま電源をオンにすると、TD-20のバージョン・示されます。
ンプで保存したデータがある場合、パターンのデータ、設定などをバルク・ダンプ器などに保存している場合、TD-20のバージョTD-20に戻してから、それらのデータをコンパに保存してください。
TDW-20_j.book 64ページ 2008年7月17日 木曜日 午前11時31分
コンパクトのコンパク了するまで
のデータW-20の取シュに保存ジョン・アて失われまに保存してンパクトフンにしたあい。付属の挿入したまプ画面が表
ルク・ダム・キットのMIDI 機アップ前にフラッシュ
66664444
TD-20 への TDW-20の取り付け
インストールの手順
1111.... 付属品を確認する。
本製品のパッケージには以下のものが入っています。パッケージを開けたら、不足しているものがないか確認しましょう。
• TDW-20 エクスパンション・ボード静電気による破損防止のため、取り付けるまで袋(導電袋)に入れたままにしておいてください。
• ドライバーTD-20底面のカバーを外すときに使います。
• 固定用具TDW-20をホルダーに固定するときに使います。
• コンパクトフラッシュ・カードバージョンアップ・プログラムが記録されています。
2222.... TD-20のデータのバックアップを保存する(P.66)。
3333.... TDW-20を取り付ける(P.67)。
4444.... TD-20のプログラムをバージョン・アップする(P.69)。
付属の● 付属が完い。
TD-20● TDラッバーすべシュのコをオださトにアッ
MIDI バ● ドラで他ン・クト
重要:取り付け前にご確認ください
66665555
いのご注意静電気により部品が破壊される恐れがあります。り扱うときは、次の点に注意してください。に触る前に、あらかじめ何らかの金属に触れて、たまっている静電気を放電してください。を持つときは、基板の縁を持ち、部品やコネクに直接手を触れないでください。を保管するとき、または輸送するときなどは、購が入っていた袋(導電袋)に入れてください。
、回路部やコネクター部には手を触れないでくだ
W-20を無理に押し込まないでください。装着しったん TDW-20を外してやり直してください。
り付けを終えたら、正しく取り付けられているこてください。
に異物が入ってしまったときは、お買い上げ店まお客様相談センターに修理を依頼してください。
TDW-20_j.book 65ページ 2008年7月17日 木曜日 午前11時31分
データの互換性● TD-20で作成し、コンパクトフラッシュに記録したバックアップは、バージョン・アップ後の TD-20でもインポート可能です(P.88)。
● バージョン・アップ前の TD-20のプリセット・ドラム・キットは、バージョン・アップ後も使用することができます。
● バージョン・アップした TD-20のデータは、バージョン・アップ前の TD-20では使用できません。
● TD-20のバージョン・アップ後に TDW-20を外すと、TD-20は動作しません。
TDW-20 取り扱● TDW-20は、TDW-20を取○ TDW-20体や衣類に
○ TDW-20ターの部分
○ TDW-20入時に基板
● TD-20内部のさい。
● 装着時は、TDにくい場合、い
● TDW-20の取とを再度確認し
● TD-20の内部たはローランド
E」画面で、[+/-]または[VALUE]で、するバックアップを選びます。
)]を押します。
名前をつけるときは、[F4(NAME)]を押しま
示されたら[F5(EXECUTE)]を押して、します。
F1(CANCEL)]を押します。
UTE)]を押して、データを保存します。
TDW-20_j.book 66ページ 2008年7月17日 木曜日 午前11時31分
66666666
付属のコンパクトフラッシュにバックアップを保存する場合は、必ずTD-20 の電源をオンにしたあとで、メモリー・カード・スロットに挿入してください。付属のコンパクトフラッシュを挿入してから電源をオンにすると、TD-20のバージョン・アップ画面が表示されます。
1. コンパクトフラッシュを TD-20 フロント・パネルのメモリー・カード・スロットに差し込みます。
※コンパクトフラッシュは挿入方向や表裏に注意し、確実に奥まで差し込んでください。また無理な挿入はしないでください。
2. [CARD]を押します。[CARD]とCompactFlash インジケーターが点灯し、「CARDMENU」画面が表示されます。
※ TD-20で初めて使用するコンパクトフラッシュを挿入した場合は、「Unformatted!」と表示されます。TD-20取扱説明書を参照して、コンパクトフラッシュを初期化してください。
3. [F1(SAVE)]を押します。
4. 「CARD SAVデータを保存
5. [F5(SAVEバックアップにす。
6. 確認画面が表データを保存
中止するには[
7. [F5(EXEC
データのバックアップを保存する
66667777
を、図の向きに合わせます。
ョン・ボードのコネクターを、本体のコネク差し込みます。このとき、各基板ホルダーの先20の取り付け穴から出るようにします。
TDW-20_j.book 67ページ 2008年7月17日 木曜日 午前11時31分
1. TD-20 の電源を切って電源プラグをコンセントから外してください。
2. TD-20 を裏返します。
※ TD-20を裏返す際は、ボタン、つまみなどを破損しないように注意してください。また、ボタン、つまみなどの保護のため、十分厚みのあるクッションやタオルなどを敷いてください。
3. TD-20 底面にある、矢印のついた 8 本のネジを外してカバーを開けます。
※矢印のネジ以外は外さないでください。
4. 基板ホルダー
5. エクスパンシターに完全に端が、TDW-
TDW-20を取り付ける
外した 8本のネジでカバーを取り付けます。
TDW-20_j.book 68ページ 2008年7月17日 木曜日 午前11時31分
66668888
6. TDW-20 に付属の固定用具で、基板ホルダーをLOCK方向に回し、TDW-20 を固定します。
取り付けを終えたら、基板ホルダーが正しくロックされていることを確認してください。
7. 手順 3 で取り
66669999
の電源をオンにします。
UTE)]を押して、TD-20 を初期化します。
・アップする
TDW-20_j.book 69ページ 2008年7月17日 木曜日 午前11時31分
1. TD-20 の電源がオフになっていることを確認し、付属のコンパクトフラッシュを TD-20 のメモリー・カード・スロットに挿入します。
2. TD-20 の電源をオンにします。以下の画面が表示されることを確認してください。
3. [F5=UPDATE]を押して、バージョン・アップを開始します。
※バージョン・アップが完了するまで 3分程度かかります。
※バージョン・アップが完了するまで、TD-20の電源をオフにしないでください。
4. 画面に「Update Completed」と表示されたら、TD-20の電源をオフにして、付属のコンパクトフラッシュを抜きます。
5. 再度 TD-20
6. [F5(EXEC
付属のコンパクトフラッシュでTD-20をバージョン
チ、フット・スイッチにより、スネアのストレイフと、通常の Hi-Hat と Fixed Hi-Hat を切り替え 位置、連打間隔に応じて、滑らかな音色変化を再mic Interval Control」機能を搭載。スネアのロー連打、ライド・シンバルのレガートやリム・アンスなど、滑らかで自然なサウンドを実現しま 色と音色制御の強化により、V-Hi-Hat の演奏を余に表現します(P.71)。 の音色と音色制御を改良。キックではタイトなバややルーズなバズを鳴らすことにより、ダイナミ変化やキット全体のまとまり感が向上します
の強化用し、高品位で臨場感のある 15の新しい Room3つのWall Type の追加と、7つのMicって、よりきめ細かな音色調整が可能になりまし
TDW-20_j.book 70ページ 2008年7月17日 木曜日 午前11時31分
ド・スイッのオン/オ(P.87)。強さ、打点る「Dynaシンバルのットのニュ(P.82)。ハットの音ころなく音are Buzz」、タムではによる音色4)。
エンスリズムを採追加。またn 追加によ8)。
77770000
主な特長
新たに 50のドラム・キットを追加臨場感あふれるアコースティック・ドラム・サウンドを新たに搭載。ロールやゴースト・ノートなどの繊細なショットからパワフルなリム・ショットまで、幅広いダイナミクスで豊かな表現力を実現しました。
また、プロセスド・サウンドやエレクトロニック・サウンドを多数搭載し、オルタネイティブ・ポップやヒップ・ホップ、クラブ・ミュージックなど、さまざまな音楽ジャンルに幅広く対応しました。
TDW-20で追加された 50のキットに加え、TD-20 のプリセット・キット(50 キット)、計 100 のキットを活用できます。
拡張された V-EDITと表現力の向上 • キックの「Mic Size」に、ラージ・ダイアフラムのバリエーションを追加。低域のアタックを増強できます(P.74)。
• きめ細かな音色設定を可能にする「Mic Position」を拡張(P.74)。
• キックによる、キット全体の「鳴り」を再現する「KitResonance」パラメーターを搭載。臨場感のあるドラム・サウンドを実現します(P.74)。
• スネアのリム・サウンドに厳選された音色をレイヤーすることができ、リム・ショットの演奏表現の幅を広げます。(P.75)。
• 叩いた強さでピッチベンドの深さが変化するエレクトロニック・インストを搭載(P.76)。
• パッナー可能
• 叩く現すル、ショした
• ハイすと
• 「Snズをクス(P.7
アンビ新アルゴTypeをPositioた(P.7
77771111
お使いの場合ダイナミクスによるレスポンスが改良されていー設定を再調整することにより、より快適に演なります。
ョン・アップ前のTD-20から、あなた自身のロードして使用する場合、ロードした後でトリ整をすることをお勧めします。
する重要な注意点適に演奏するために、以下の調整をすることを
のは「Offset」の調整です。IT]ー[TRIGGER]
lash Sens」も重要です。調整してみてくださ
RIGGER]ー[F3(HI-HAT)]
sed (Pedal HH)」の音量は、ドラム・キッ定できます。IT]ー[F2(FUNC)]ー[F1(VOLUME)]
のヘッド(Bow)とリム(Edge)の音量は、立して音量を調節することができます。IXER]ー[F5(H & R)]
TDW-20_j.book 71ページ 2008年7月17日 木曜日 午前11時31分
バックアップ機能の拡張一枚のコンパクトフラッシュに、最大 99個のバックアップを作成することができるようになりました。TD-20で作成したバックアップは、バージョン・アップ後のインポート機能を使うことにより、そのまま使うことができます(P.72)。
キット・セレクション機能TD-20/ TDW-20のプリセット・キットや、コンパクトフラッシュにバックアップされているキットを、ユーザー・メモリーにコピーすることなく演奏できる「キット・セレクション機能」を搭載しました(P.89)。
※キット・セレクション機能でキットを演奏する場合は、キットをエディットすることはできません。またパッド・パターン機能は使用できません。
パターンの追加新たに 50のプリセット・パターン(P101~ 150)が追加されました。
KD-120をキックの音色のるため、トリガ奏できるように
あなたがバージトリガー設定をガー設定を再調
Hi-Hatに関ハイハットを快お勧めします。
• 最も重要な操作:[K
• 「Foot Spい。操作:[T
• 「foot cloトごとに設操作:[K
• ハイハットそれぞれ独操作:[M
のファイル名記録されたコンパクトフラッシュをパソコンで読0に表示される名称と、パソコンで表示されるます。データをパソコンで管理したり、ユーザーの参考にしてください。
前のTD-20 で保存したバックアップ
ル名は「TD20BK01.TD0」です。
バージョンアップ前の TD-20で保存されたことK01」は、No.1のバックアップを意味します。プの場合は、「BK08」になります。
後のTD-20 で保存したバックアップ
ル名は「TDW2BK01.TD0」です。
はバージョンアップ後の TD-20で保存されたことK01」は、No.1のバックアップを意味します。ップの場合は、「BK99」になります。
ル
ーンは、それぞれファイルとして記録されます。
ン 1(C1)のファイル名は0」です。「P001」は、パターンNo.1 を意味し.100のファイル名は「TD20P100.TD0」にな
TDW-20_j.book 72ページ 2008年7月17日 木曜日 午前11時31分
77772222
TDW-20を装着し、TD-20をバージョン・アップすると、100 のドラム・キットを使えるようになります。初期状態では、キット 1~50 には追加された50 のキット、キット51 ~ 100には、バージョン・アップ前の TD-20のプリセット・キットが読み込まれています。これら 100 のプリセット・キットは、ユーザー・キットとは別に記憶されいるので、キット単位でユーザー・キットにコピーすることができます。
コンパクトフラッシュに記録されるデータ • 100のユーザー・キットを、まとめてバックアップすることができます。1枚のコンパクトフラッシュには、最大99 のバックアップを記録することができます。
• コンパクトフラッシュにバックアップされたドラム・キットは、本体にロードするだけでなく、キット・セレクション機能によりユーザー・キットとしてロードすることなく演奏することができます(エディットすることはできません)(P.89)。
• バージョンアップ前のTD-20で作られたバックアップは、インポート機能によって、バージョンアップ後でも読み込むことができます(P.88)。
バージョンアップ前のTD-20 で作られたバックアップをインポートした場合、ユーザー・キット51 ~ 100に読み込まれます。
バックアップTD-20のデータがみ込む場合、TD-2ファイル名は異なり同士で交換するとき
バージョンアップ
Backup 1のファイ
最初の「TD20」はを意味します。「BNo.8 のバックアッ
バージョンアップ
Backup 1のファイ
最初の「TDW2」を意味します。「BNo.99のバックア
パターン・ファイ
セーブされた各パタ
セーブされたパター「TD20P001.TDます。パターン Noります。
ドラム・キットの構成
77773333
Backup 3Backup 2kup 1 Backup 99
KIT 100
KIT 4KIT 3
KIT 2 1
Backup 3Backup 2Backup 1
KIT 50
KIT 4KIT 3
KIT 2KIT 1
Backup 8
TDW-20_j.book 73ページ 2008年7月17日 木曜日 午前11時31分
TD-20CARD
KIT 100
User
KIT 4KIT 3
KIT 2KIT 1
Bac
KIT
[CARD]–[F2 (LOAD)]
[CARD]–[F1 (SAVE)]
[COPY]–[F1(KIT)]–[F2 (PRESET)]
KIT 100
TDW-20 Preset
KIT 4KIT 3
KIT 2KIT 1
PRESETTD-20 Preset
CARD(Original TD-20)
[CARD]–[F3 (IMPORT)]
LOAD
SAVE
IMPORT
CO
PY
で[SHIFT]+[F4]を押すと、インストのパラ値に戻すことができます。
能なインストのエディット画面には、V-EDIT の表示されます。
K /EXP KICK)
: キックに適したタイトなバス・サウンドになり、臨場感と表現力が向上しました。
n: バリエーションが増え、音作りの自由度が広がりました。 アタックの低域を強調させることができます。
nce: ドラム・キット全体の共鳴を加えることにより、臨場感のあるキットを再現します。
ラメーター
TDW-20_j.book 74ページ 2008年7月17日 木曜日 午前11時31分
DIT」画面を標準的な
-EDITが可イコンが
(KICnare Buzz
ic Positio
ic Size:
it Resona
DIT パ
77774444
新機能
「INST」画面でインストを選択するときに、[F4(INT<>EXP)]を押すと、TD-20のインストと TDW-20のインストを切り替えることができます。
TDW-20のインスト・グループには、名前の前に「EXP」のアイコンが表示されます。
「INST Eメーター
※ Vア
キック• S
• M
• M
• K
インストのパラメーター[INST]
インストの選択 V-E
77775555
/ EXP TOM) : 臨場感と表現力のあるバズ・サウンドになりました。タムに適したややルーズなバズ・サウンドです。
n:レコーディング時のマイク・ポジションによる音づくりを、忠実に再現しました。
HI-HAT/ EXP HI-HAT)
: ハイハット・サウンドにタンバリン、カバサ、カウベルを加えることができます。ハイハットにパーカッションのグルーブが加わります。 追加された音の音量バランスを調整します。
チ、またはパッド・スイッチで、ハイハットをクFixed Hi-Hat = FIXED2)にすることができます。ト・スイッチ/パッド・スイッチの設定』(P.87)さい。
TDW-20_j.book 75ページ 2008年7月17日 木曜日 午前11時31分
スネア(SNARE/ EXP SNARE) • Mic Position: バリエーションが増え、音作りの自由度が
広がりました。 • Add Rim Sound: タンバリン、909 Claps、Gate Hitの音
を追加できます。リム・ショットの演奏表現の幅を広げます。
• Level: リム・サウンドで追加された音の音量バランスを調整します。
インストによっては、「Material」と「Strainer Adj.」はエディットできません。
フット・スイッチ、またはパッド・スイッチで、スネアのストレイナーをはずした状態(Strainer Adj. = OFF)にすることができます。詳しくは『フット・スイッチ/パッド・スイッチの設定』(P.87)を参照してください。
タム(TOM• Snare Buzz
• Mic Positio
ハイハット(• Add Sound
• Level:
フット・スイッローズの状態(詳しくは『フッを参照してくだ
クトロニック・インストの・ピッチ・ベンドチ・ベンドは、TDW-20で追加されたエレクトで使用できる機能です。
W-20で追加されたエレクトロニック・インストし、[F2(EDIT)]を押すと、以下の画面が表示
に応じて、ピッチが変化します。
でピッチの変化を調節します。
設定値 説明
]
-480~ +480 音の高さ
nd OFF、ON ベロシティによってピッチを変化させる機能のオン/オフ
-24 ~+24 ベロシティによるピッチの変化量
-31 ~+31 ベロシティによるピッチの変化パターン
)]
-31 ~+31 余韻の長さ(減衰時間)
TDW-20_j.book 76ページ 2008年7月17日 木曜日 午前11時31分
77776666
各シンバルのシズル • Sizzle Type: シズル・タイプにビーズが追加されました。 • Sizzle Amount:シズルの量を調節できます。
TDW-20 エレダイナミックダイナミック・ピッロニック・インスト
「INST」画面でTDをパッドにアサインされます。
パッドを叩いた強さ
以下のパラメーター
パラメーター
[F1(PITCH)
Basic Pitch
Dynamic Be
Bend Depth
Bend Time
[F2(DECAY
Decay Time
77777777
ダーによる設定方法
で、グループ・フェーダーを使って各トリガー・イ(MINIMUM VOLUME)を調節できます。
DER]ー[F2(MIN VOL)]
、アンビエンスおよびMFXのかかり具合を調節すきます。
TDW-20_j.book 77ページ 2008年7月17日 木曜日 午前11時31分
MINIMUM VOLUME の設定範囲が広がり、使い勝手が向上しました。MINIMUM VOLUME は、最強打時の音量を保ったまま弱打時の音量を大きくするパラメーターです。これにより、スネアのゴースト・ノートやライド・シンバルのレガート音を、より聴こえやすくすることができます。
操作:
[MIXER]ー[F3(MIN VOL)]
グループ・フェー
「MIX EDIT」画面ンプットの最小音量
操作:
[MIXER]+[FA
※ ボリュームることもで
ミキサーの設定
トリガー・インプット の最小音量(MINIMUM VOLUME)設定
用し、高品位で臨場感のある 15の新しい Room3つのWall Type の追加や、7つのMicって、よりきめ細かな音色調整が可能になりまし
ス
om Type(15種類)
Booth B Studio A
Basement Jazz Club
TDW-20_j.book 78ページ 2008年7月17日 木曜日 午前11時31分
77778888
パッド・コンプレッサーのテンプレートを改良しました。
新アルゴリズムを採Typeを追加。またPosition 追加によた。
パッドごとのコンプレッサー
パッド・コンプレッサーのテンプレート改良
パラメーター 設定値 説明
AttackEMPHASIS、CRUSH
EMPHASIS:アタックが強調されます。
CRUSH: アタックが抑えられます。
Type
COMPSOFT 1~2、COMPMED、COMPHARD、LIMITER、EXPANDER
このパラメーターを変更すると、Thre、Ratioが変更されます。
Time
KICK 1~ 3、SNARE1~ 3、TOM1~ 3、CYM 1~2、OTHER1~ 3
このパラメーターを変更すると、Atck、Hold、Relsが変更されます。
アンビエン
新しい Ro
Booth A
Studio B
77779999
を再現するため、アンビエンス・マイクのバリ類追加しました。
[SHIFT]+[F4]を押すと、アンビエンスのを初期化することができます。
ion(計9 種類)
Low Floor Low
Mid Mid High
Ceiling A CeilingB
TDW-20_j.book 79ページ 2008年7月17日 木曜日 午前11時31分
「Curtain」、「Cloth」、「Concrete」の 3種類が追加されました。
よりリアルな臨場感エーションを 7種
「ROOM」画面で各パラメーター
Rock Club Ballroom Gate
Concert Hall Sports Arena Expo Hall
[FX] Bottle [FX] City [FX] Spiral
新しいWall Type(3 種類)
Curtain Cloth Concrete
Mic Posit
Next Door
Mid Low
High
のパラメーターに、出力ゲインが追加されまし
の出力を、6 dB増幅することができます。
設定画面で[F5(MFX MON)]を押すと、ャックと PHONES ジャックにはエフェクト音だになります。
ェクト
・パラメーターの追加
ェクトのプレビュー
TDW-20_j.book 80ページ 2008年7月17日 木曜日 午前11時31分
88880000
アンビエンスのパラメーターに、出力ゲインが追加されました。
アンビエンスの出力を、6 dB増幅することができます。
アンビエンスの設定画面で[F5(AMB MON)]を押すと、MASTER OUTジャックとPHONES ジャックにはアンビエンス・サウンドだけが出力されるようになります。
マルチ・エフェクトた。
マルチ・エフェクト
マルチエフェクトのMASTER OUTジけが出力されるよう
出力ゲイン・パラメーター追加
アンビエンスのプレビュー
マルチエフ
出力ゲイン
マルチエフ
88881111
・パターン機能を使用する/使用しないを切り替。
UNC)]ー[F4(PAD PTN)]
ットのパラメーター[KIT]
ターン機能のオン/オフ
TDW-20_j.book 81ページ 2008年7月17日 木曜日 午前11時31分
MASTER COMPにゲイン・リダクション・メーターが追加され、コンプレッサーの効果を視覚的に確認できるようになりました。
操作:
[MASTER COMP/EQ]を押す。
キットごとにパッドえることができます
操作:
[KIT]ー[F2(F
マスター・コンプレッサー
ゲイン・リダクション(GR)メーター
ドラム・キ
パッド・パ
ィーや、ハイハットの開き具合、スネア、ライと AUXのリムの打点位置をリアルタイムに表示。
隔に応じて、シンバルやスネアのロールの音色が滑す。
(TRGMON)]
トリガー情報の表示
TDW-20_j.book 82ページ 2008年7月17日 木曜日 午前11時31分
88882222
最新のパッドに対応しました。 • CY-5 • RT-10 シリーズ
以下のパッド/トリガー・インプットのアドバンスト・トリガー・パラメーターに、打点位置検出に関するパラメーターが追加されました。
• SNARE(ヘッド/リム) • TOM(リム) • RIDE(ボウ) • AUX(リム)
打点位置検出機能のオン/オフを切り替えることもできます。
※打点位置検出に対応していないトリガー・インプットを選択すると、「---」と表示されます。
操作:
[TRIGGER]ー[F5(ADVANCE)]ー[F4(POSI)]ーパッド選択
各パッドのベロシテド・シンバル、タムすることができます
連打時の時間間らかに変化しま
操作:
[TOOLS]ー[F3
トリガー・パラメーターの設定
アドバンスト・トリガー・パラメーターの追加
各パッドの
88883333
、[F5]を押すことにより3つの画面を切り替え
~[F5]でコピーするデータを選択
TDW-20_j.book 83ページ 2008年7月17日 木曜日 午前11時31分
インスト・セット(COMP/EQ を含む/含まない)、アンビエンス、マルチエフェクト、ボリューム、パン、トリガー設定などの設定を、プリセットやコンパクトフラッシュのバックアップからコピーすることができるようになりました。
コピーを実行するとコピー先のパラメーターが上書きされてしまいますのでご注意ください。
「COPY」画面ではることができます。
COPY A画面
COPY B画面
COPY C画面
操作:
[COPY]ー[F1]
コピー機能
MP/EQのコピーコピー時に、パッド COMP/EQ の設定を含めるすることができます。
Tom 1、2、3、4
Hi-Hat、Crash1、2、Ride、Edge
AUX 1、2、3、4
アイコン インスト
TDW-20_j.book 84ページ 2008年7月17日 木曜日 午前11時31分
88884444
バージョン・アップ前の TD-20で作成して、コンパクトフラッシュにバックアップしたキットのトリガー・バンクを、コピーして使用することができます。
1111.... コンパクトフラッシュに保存されているバックアップを本体にインポートします。
2222.... データのバックアップをコンパクトフラッシュに保存します。
3333.... [COPY]ー[F5]ー[F1(TRIG)]を押して「COPYTRIGGERBANK」画面を表示させます。
複数のインストをまとめて別のキットにコピーすることができます。
パッドの COインスト・セットのか含めないかを選択
トリガー・バンクのコピー
インスト・セットのコピー
設定値 アイコン インスト
KICK/SNR Kick、Snare
TOMS 1~ 4
CYM SET
AUX 1~ 4
設定値
88885555
コピー
で、[SHIFT]を押しながら[COPY]を押す。
SHIFT]を押しながら[COPY]を押す。
ピー
コピーしたいパラメーターの画面を表示させ、がら[COPY]を押す。
ピー
面で[SHIFT]を押しながら[COPY]を押す。
のコピー
S」画面で[SHIFT]を押しながら[COPY]を押
へのジャンプ
TDW-20_j.book 85ページ 2008年7月17日 木曜日 午前11時31分
インストのコピー時に、パッド COMP/EQ の設定を含めるか含めないかを選択することができます。
ドラム・キットの
「DRUMKIT」画面
インストのコピー
「INST」画面で、[
MIXER設定のコ
「MIXER」画面で、[SHIFT]を押しな
アンビエンスのコ
「AMBIENCE」画
マルチエフェクト
「MULTI EFFECTす。
インストのコピー コピー画面
ト/クリック/MIX INの出力先として、PHONES OUTとDIRECT OUT 5~ 8を同時にるようになりました。
ースの出力先
TDW-20_j.book 86ページ 2008年7月17日 木曜日 午前11時31分
88886666
各インストのMASTER OUTジャックへの出力をオフにすることができるようになりました。
これにより、ヘッドホンですべてのインストをモニターしながら、一部のインストだけをMASTER OUTジャックから出力することができます。
操作:
[SETUP]ー[F2(OUTPUT)]ー[F1(MASTER)]
[F5(DEFAULT)]を押して、表示された画面で[F5(EXECUTE)]を押すと、全インストのマスター出力の出力先が初期設定に戻ります。
シーケンサーのパーMASTER OUT、指定することができ
TD-20全体の設定
マスター出力
その他のソ
88887777
、ステレオ入力としてだけではなく、モノラル×できます。
の Lチャンネルでクリック音、Rチャンネルでうな機器を接続した場合は、 Mode = MONOにリック音とバッキングがセンターから聴こえるよ
(OPTION)]ー[F3(MIX IN)]
ックの設定
定値 説明
、LY、LY
入力として使用するジャックを選択します。L + R: 両チャンネルを使用L ONLY: 左チャンネルのみ使用RONLY: 右チャンネルのみ使用
REO、O
STEREO: ステレオ入力として使用MONO: モノラル×2として使用
+12 入力レベルの調節
TDW-20_j.book 87ページ 2008年7月17日 木曜日 午前11時31分
フット・スイッチ(BOSS FS-5U:別売)と専用ケーブル(PCS-31)を使って、クローズ・ハイハット(Fixed Hi-Hat = FIXED2)、スネアのストレイナーをはずした状態(Strainer Adj. = OFF)をコントロールすることができます。
これらは、パッド・スイッチでコントロールすることもできます。
フット・スイッチの設定:
[SETUP]ー[F3(CONTROL)]ー[F1(FOOT SW)]
パッド・スイッチの設定:
[SETUP]ー[F3(CONTROL)]ー[F2(PAD SW)]
パッド・スイッチ機能は、AUX 3、AUX 4でのみ有効です。
MIX INジャックを2として使うことが
たとえば、MIX INバッキングが鳴るよすることによってクうになります。
操作:
[SETUP]ー[F4
フット・スイッチ/パッド・スイッチの設定
MIX IN ジャ
パラメーター 設
InputL + RLONR ON
Mode STEMON
Gain 0~
TDW-20_j.book 88ページ 2008年7月17日 木曜日 午前11時31分
88888888
バージョン・アップ前に保存したバックアップは、バージョン・アップ後の TD-20でも読み込むことができます。
1111.... コンパクトフラッシュをメモリー・カード・スロットに挿入します。
2222.... [CARD]を押してから[F3(IMPORT)]を押します。
3333.... バックアップを選択します。
4444.... [F5(IMPORT)]を押します。
インポートされたデータについて
• バックアップされていたキットは、キット 51~ 100にロードされます。キット 1~ 50には、TDW-20のプリセット・キットがロードされます。
• ドラム・キットに設定されていたプログラム・チェンジ・ナンバーは初期値に戻ります。
バージョン・アップ前のバックアップ・データのインポート
88889999
ュにバックアップされているキットをユーザー・となく、そのまま演奏することができます。
]
プからのキット選択
TDW-20_j.book 89ページ 2008年7月17日 木曜日 午前11時31分
TD-20、TDW-20 のプリセット・キットや、コンパクトフラッシュに保存されているバックアップのキットを、ユーザー・キットにロードすることなく演奏することができます。
[COPY]を押すと、ユーザー・キットに素早くコピーすることもできます。
※パッド・パターン機能は使用できません。また、エディットすることはできません。
操作:
1111.... [TOOLS]を押してから[F1(KIT SEL)]を押します。
2222.... 演奏するキットを選びます。
[F1(TD-20)]: TD-20 のプリセット・キット
[F2(TDW-20)]: TDW-20 のプリセット・キット
[F3(CARD)]: コンパクトフラッシュに記録されているバックアップのキット
コンパクトフラッシキットに読み込むこ
操作:
[SHIFT]+[KIT
その他の機能
キット・セレクション機能
バックアッ
0 OpenBrass SR1 50s King S2 50s King SR3 GT Maple S4 GT Maple SR5 Piccolo S6 Piccolo SR7 12"Cmpact S8 12"Cmpact SR9 10"Cmpact S0 10"Cmpact SR1 Skanky2 S2 Skanky2 SR3 StlPhonic S4 StlPhonic SR5 50sKingMt S6 50sKingMt SR7 WhiteAsh S8 WhiteAsh SR9 Popcorn S0 Popcorn SR
P SNARE PROCESSED1 PrcsWood S2 PrcsWood SR
. インスト名 653 PrcsMetal S654 PrcsMetal SR655 PrcsElec1 S656 PrcsElec1 SR657 PrcsElec2 S658 PrcsElec2 SR659 PrcsXStik S660 PrcsNoise S661 DynaFilter S662 ClscFat1 S663 ClscFat1 SR664 ClscFat2 S665 ClscFat2 SR666 SoundFX1 S667 SoundFX2 S668 SoundFX3 S669 SoundFX4 S670 SoundFX5 S671 Distorted1 S672 Distorted2 S673 Wood XStik674 Steel XStik675 Brass XStik676 80sMtl XStik677 50sKingXStik
No. インスト名
TDW-20_j.book 90ページ 2008年7月17日 木曜日 午前11時31分
636363636363636363636464646464646464646465
EX6565
No
99990000
資料
ドラム・インスト・リストNo. インスト名
EXP KICK
562 22"BirchLo K563 22"BirchHi K564 23"D-Maple K565 22"NCMaple K566 22"LwgVntg K567 22"RokVntg K568 22"PKMaple K569 22"SnrVntg K570 24"VLite K571 22"Premium K572 22"BirchWetK573 22"GT Vntg K574 22"LooseHd K575 20"TightHd K576 20"GT Open K577 20"BigBand K578 18"Combo K579 18"BeBopLo K580 18"BeBopHi K581 Ambience K
EXP KICK PROCESSED
582 Tight1 K583 Tight2 K
584 Tight3 K585 Tight4 K586 Tight5 K587 Tight6 K588 Solid1 K589 Solid2 K590 Solid3 K591 Wild K592 Mondo K593 Reverb K594 Distorted K595 BreakBeats K596 Woofer K597 FX Stomp K598 FX Chest K599 FX Handle K600 FX Door K
EXP KICK ELEC
601 ClscElec7 K602 ClscElec8 K603 ClscElec9 K604 808Attack K605 808Low K606 909Power K
No. インスト名 607 909Low K608 AnalogQ1 K609 AnalogQ2 K610 AnalogQ3 K611 Synthy K612 Filter1 K613 Filter2 K614 Filter3 K615 Filter4 K616 Jungle K617 FX Elec1 K618 FX Elec2 K619 FX Elec3 K620 FX Elec4 K
EXP SNARE
621 CustomWoodS622 CustomWoodSR623 80s Metal S624 80s Metal SR625 Bronze S626 Bronze SR627 CraftStl S628 CraftStl SR629 OpenBrass S
No. インスト名
99991111
5 13"KZComb HB6 13"KZComb HE7 13"P-Crsp HB8 13"P-Crsp HE9 Distorted HB0 Distorted HE1 Lo-Fi HH2 808Chick HH3 909Power HH4 Impulse HH5 Super-Q HH6 DistJingleHH7 MtlCrasherHH8 Jingle HH9 Beads HH0 Ratchet HH
EXP CRASH1 15"PaperCrBw2 15"PaperCrEg3 16"PoP CrBw4 16"PoP CrEg5 18"PoP CrBw6 18"PoP CrEg7 17"DarK CrBw8 17"DarK CrEg9 18"DarK CrBw0 18"DarK CrEg1 18"JazZ CrBw2 18"JazZ CrEg
EXP SPLASH
. インスト名
793 4"Paper SpBw794 4"Paper SpEg795 6"Splaz SpBw796 6"Splaz SpEg797 10"UF SpBw798 10"UF SpEg799 10"ChinaSpBw800 10"ChinaSpEg
EXP CHINA
801 13"Latin Bw802 13"Latin Eg803 14"Trash Bw804 14"Trash Eg805 20"CB Low Bw806 20"CB Low Eg
EXP STACKED CYMBAL
807 16"Stackd Bw808 16"Stackd Eg809 18"Stackd Bw810 18"Stackd Eg
EXP RIDE
811 20"JazZ Rd812 20"JazZ RdBl813 20"JazZ RdEg814 20"HvyDKRd815 20"HvyDKRdBl816 20"HvyDKRdEg817 20"ASpecRd818 20"ASpecRdBl819 20"ASpecRdEg
No. インスト名
TDW-20_j.book 91ページ 2008年7月17日 木曜日 午前11時31分
678 WhtAsh XStik679 Light XStik680 Lo-Fi XStik
EXP SNARE ELEC681 ClscElec6 S682 ClscElec7 S683 ClscElec8 S684 ClscElec9 S685 808Power S686 808Power SR687 909Power S688 909Power SR689 909Dist S690 909Reverb S
EXP TOM691 8"NCMpl T1692 8"NCMpl T1R693 10"NCMpl T2694 10"NCMpl T2R695 12"NCMpl T3696 12"NCMpl T3R697 14"NCMpl T4698 14"NCMpl T4R699 16"NCMpl T5700 16"NCMpl T5R701 8"PKJaz T1702 8"PKJaz T1R703 10"PKJaz T2704 10"PKJaz T2R705 12"PKJaz T3
No. インスト名
706 12"PKJaz T3R707 13"PKJaz T4708 13"PKJaz T4R709 16"PKJaz T5710 16"PKJaz T5R711 10"Rock T1712 10"Rock T1R713 12"Rock T2714 12"Rock T2R715 14"Rock T3716 14"Rock T3R717 16"Rock T4718 16"Rock T4R719 18"Rock T5720 18"Rock T5R721 8"Pop T1722 8"Pop T1R723 10"Pop T2724 10"Pop T2R725 12"Pop T3726 12"Pop T3R727 13"Pop T4728 13"Pop T4R729 16"Pop T5730 16"Pop T5R731 8"Antiq T1732 8"Antiq T1R733 10"Antiq T2734 10"Antiq T2R735 12"Antiq T3736 12"Antiq T3R
No. インスト名
737 13"Antiq T4738 13"Antiq T4R739 16"Antiq T5740 16"Antiq T5R
EXP TOM ELEC
741 ClscElec5 T1742 ClscElec5 T2743 ClscElec5 T3744 ClscElec5 T4745 ClscElec6 T1746 ClscElec6 T2747 ClscElec6 T3748 ClscElec6 T4749 ClscElec7 T1750 ClscElec7 T2751 ClscElec7 T3752 ClscElec7 T4753 ClscElec8 T1754 ClscElec8 T2755 ClscElec8 T3756 ClscElec8 T4757 ClscElec9 T1758 ClscElec9 T2759 ClscElec9 T3760 ClscElec9 T4
EXP HI-HAT
761 14"CstmDK HB762 14"CstmDK HE763 14"Medium HB764 14"Medium HE
No. インスト名
76767676767777777777777777777778
787878787878787878797979
No
0 Explosion1 ElecRide2 ElecRide Bl3 ElecRide Eg4 Revrs Kick5 Revrs Snare6 Revrs Crash27 Revrs China28 AcousGuitar9 FingerBass0 SlapBass
EXP OFF1 EXP Off
. インスト名
TDW-20_j.book 92ページ 2008年7月17日 木曜日 午前11時31分
99992222
820 20"KSpecRd821 20"KSpecRdBl822 20"KSpecRdEg823 20"VntZ Rd824 20"VntZ RdBl825 20"VntZ RdEg826 19"JzCrsRd827 19"JzCrsRdBl828 19"JzCrsRdEg829 19"P-CrsRd830 19"P-CrsRdBl831 19"P-CrsRdEg
EXP PERCUSSION
832 Timbale2Hi833 Timbale2HiRm834 Timb2HiPaila835 Timbale2Lo836 Timbale2LoRm837 Timb2LoPaila838 Pandeiro2839 Pande2 Slap840 Pande2 Close841 Pande2 Edge842 Pande2 Roll1843 Pande2 Roll2844 Caixa845 Caixa Rim846 Cajon2 Bass847 Cajon2 Close848 Cajon2 Open849 Cajon2 Slap
No. インスト名
850 Bendir851 Darabuka Dom852 Darabuka Tak853 AnkleBeads854 AfricaJingle855 Cabasa2856 Tambourine4857 TambStick858 TambShake859 Sagat Close860 Sagat Open861 MetalCrasher862 ConcertBD2863 ConcertBD2mt864 LargeGong865 Timpani2 C866 Timpani2 G867 HiraTaiko868 HiraTaikoRim869 YaguraTaiko870 YaguraTaikoR871 NagodoTaiko872 NagadoTaikoR
EXP SFX
873 Tick874 Chick875 Random876 ReverbSlap877 Hammer878 Anvil879 MetalDoor
No. インスト名
880 MetalPhase881 RvsMtlFaze882 WhiteLazer883 CosmicWater884 CosmicDrip885 CosmicClaps886 CosmicChirp887 Falling888 FlyAway889 BounceDown890 TimeTunnel1891 TimeTunnel2892 SpaceTrip893 Growl894 Ripping895 SpaceAlien896 SpaceWarp897 Shake898 ShakeDown899 Gear900 GearLong
EXP OTHER
901 Group Claps902 High Claps903 Mid Claps904 Low Claps905 Hi-Q Claps906 Reverb Claps907 IronWhip908 Ratchet909 Drawer
No. インスト名
9191919191919191919192
92
No
99993333
TDW-20_j.book 93ページ 2008年7月17日 木曜日 午前11時31分
スネア、タム音色について音色名の最後の文字はヘッド・ショット時、またはリム・ショット時の音色であることを表しています。
(例)S : スネアのヘッド音色SR: スネアのリム音色T1: タム1のヘッド音色T1R : タム1のリム音色
シンバル音色について音色名の最後の文字はボウ・ショット、エッジ・ショット、ベル・ショット時の音色であることを表しています。
(例)HB: ハイハットのボウ音色HE: ハイハットのエッジ音色CrBw: クラッシュのボウ音色CrEg : クラッシュのエッジ音色Rd: ライドのボウ音色RdBl: ライドのベル音色RdEg : ライドのエッジ音色
エレクトロニック音色についてエレクトロニック・インストのダイナミック・ピッチ・ベンドを使用する場合、非常に低い周波数の音が発生することがあります。この場合は、アンプの音量を下げてスピーカーやヘッドホンを保護するなど、注意してご使用ください。
9999
ck
ub
ntRock
c
ver
eJazz
lue
Jungle *1 Loop
l
op
ouse
Dry
omper
S vs DJ
xCity
lay
d Out
erc
rums
an
<GER *1 1Shot, Tap
キット名 備考 パッド・パターン
TDW-20_j.book 94ページ 2008年7月17日 木曜日 午前11時31分
4444
プリセット・ドラム・キット・リスト
No. キット名 備考 パッド・パターン
1 TDW-20
2 50s King
3 ControlRoom
4 Metal Core
5 FunkGroove
6 40s BeBop
7 >processed>>
8 Cajon
9 Melodious *1 Tap
10 Premium
11 SwingJazz
12 BluesRock
13 Dry Studio
14 2HH House
15 TechFusion
16 LetItBeat
17 neotype *1 1Shot, Tap
18 JazzBop
19 RawBeat
20 VintageRock
21 D-N-B *1 Loop
22 GarageRock
23 80s Funk
24 Cashmirror
25 BREAKs
26 90s Ro
27 JazzCl
28 Jive
29 Ambie
30 Cosmi
31 Crosso
32 Vintag
33 Coolth
34 BulletB
35 Funky
36 Natura
37 LA BeB
38 MBs H
39 Bronze
40 DarkC
41 DRUM
42 Gated
43 RotoF
44 PopDe
45 1985
46 Space
47 BrazilP
48 LatinD
49 InVasi
50 FLA>n
No.
99995555
Shallow
Ballad *1 Loop
Raspy
PopReggae *1 Loop
BrassBiggie
WetBooth *1 Loop
70s Record
Lite
Mellow
Stadium
TiteOctas
90s Power
FxJungle *1 Tap
Tekno
TR-808 *1 Loop
TR-909
Hex< >Drum *1 Loop
Cosmosis
Technology
OrchPerc *1 Tap
Survivor
Latin Toys
African Perc
Tabla/Sitar *1 Loop, Tap
UserKit *3
キット名 備考パッド・パターン
TDW-20_j.book 95ページ 2008年7月17日 木曜日 午前11時31分
51 VPro
52 Slamin' *1 Loop
53 METAL
54 JazzCombo
55 OverDrive *1 Tap
56 Titanium
57 RotoKit *1 Loop
58 UNIVERSE
59 Skanky
60 Brushes *2
61 Spark!
62 >>GT>>
63 Antique
64 =BreakBeats=
65 Studio
66 Groover *1 Loop
67 Mallet
68 Drumline
69 JazzGig *1 Loop
70 Airtime
71 Sploink!
72 Boogaloo
73 Zeppy
74 Arena
75 Maple
No. キット名 備考パッド・パターン
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
No.
TDW-20_j.book 96ページ 2008年7月17日 木曜日 午前11時31分
99996666
パッド・パターンについてLoop: パターンが割り当てられたパッドを叩くとバッキング用のパ
ターンがループ再生し、同じパッドをもう一度叩くと止まります(ループ・パターン)。
1Shot:パターンが割り当てられたパッドを叩くとあらかじめ用意されたパターンが一度だけ鳴ります(1ショット・パターン)。
Tap: パターンが割り当てられたパッドを叩くたびにコード音やメロディーなどが1 つずつ鳴らせます(タップ・パターン)。
備考
*1:パッド・パターンが設定されています。
※ループ・パターンを止めるときは、ループ・パターンを鳴らしたパッドをもう一度叩くか、TD-20 本体の[STOP]を押してください。
※ドラム・キットに設定されているすべてのパッド・パターンをまとめてオフにしたい場合は、PadPtn Master SW の設定をオフにしてください。PadPtn Master SW はドラム・キットごとに設定できます。
設定方法:[KIT]ー[F2(FUNC)]ー[F4(PADPTN)]、PadPtn Master SW= ALL PADSOFF
*2:ブラシでの演奏が可能です
*3:パッドのボリュームなどが標準的な値に設定されています。キットを最初から作るときにお使いください。
99998888
'07. 10. 01 現在(Roland)
製品に関するお問い合わせ先
050-3101-2555
ローランド・ホームページ http://www.roland.co.jp/
電話受付時間: 月曜日~土曜日 10:00~17:30(年末年始を除く)
※IP電話からおかけになって繋がらない場合には、お手数ですが、電話番号の前に“0000” (ゼロ4回)をつけてNTTの一般回線からおかけいただくか、携帯電話をご利用ください。
※上記窓口の名称、電話番号等は、予告なく変更することがありますのでご了承ください。
お問い合わせの窓口
最新サポート情報 製品情報、イベント/キャンペーン情報、サポートに関する情報など
ローランドお客様相談センター
TDW-20_j.book 98ページ 2008年7月17日 木曜日 午前11時31分