rod bolts, & nuts
DESCRIPTION
Rod Bolts, & NutsROD BOLTSAvailable in three unique styles, depending on your rod design and horsepower requirement. All Crower Sportsman feature high strength steel alloy bolts (180,000 p.s.i.), while all Crower steel billet and titanium rods come standard with H-11 tool steel bolts (220,000 p.s.i.). But for extreme rpm and endurance applications, Crower offers the new AMS5844 bolt (285,000 p.s.i.) available as an upgrade option. Both feature a 12-point head and rolled fillets, thread rolledTRANSCRIPT
For technical support call 619-661-6477 (7am to 5pm PST) • 24 hour fax: 619-661-6466 • www.crower.com196
Part No. DimensionDescription90811-190813-190814-1
Billet or Forged RodsBillet Rods
Billet & Sportsman Rods , 12-point Alloy
7⁄1611⁄32
3⁄8
ROD NUTSCrower offers two grades of quality rod nuts. The H-11 tool steel nuts are rated at 220,000 p.s.i., while the high strength steel alloy nuts are rated at 180,000 p.s.i. Sold separately, by the piece.
STRETCH GAUGECrower highly recommends using a stretch gauge to tighten rod bolts to their recommended stretch figures. This tool will provide accurate and repeatable results every time if used correctly. Includes dial indicator, fixture and instructions.
Part No. Description90700 Rod bolt stretch gauge indicator
ROD BOLTSAvailable in three unique styles, depending on your rod design and horsepower requirement. All Crower Sportsman feature high strength steel alloy bolts (180,000 p.s.i.), while all Crower steel billet and titanium rods come standard with H-11 tool steel bolts (220,000 p.s.i.). But for extreme rpm and endurance applications, Crower offers the new AMS5844 bolt (285,000 p.s.i.) available as an upgrade option. Both feature a 12-point head and rolled fillets, thread rolled after heat-treat. To determine which bolts are required for a particular rod, contact Crower. Sold by the piece or set. Bolt lengths are measured from under the head to the end of the threaded portion.
Part No. DimensionDescription
7/16 x 2.000" 7⁄16 x 1.715"7⁄16 x 1.940"7⁄16 x 2.320"3⁄8 x 1.920"
7⁄16 x 2.070"3⁄8 x 1.600"
7⁄16 x 1.800"7⁄16 x 1.440"
7⁄16 x 1.800"5⁄16 x 1.500"7⁄16 x 1.700"7⁄16 x 1.540"3⁄8 x 1.600"
7⁄16 x 1.540"7⁄16 x 1.700"7⁄16 x 1.800"3⁄8 x 1.600"
5⁄16 x 1.500" 1⁄4 x 1.375"
90800-1 90802-190803-190804-190805-190807-190828-190829-190846-1
90820-190824-190825-190826-190827-1
90830-190831-190832-190842-190845-1 90847-1
Cap Screw 12-pt Thru-bolt (SB, F)
Thru-bolt (F)Thru-bolt (F)
Thru-bolt (B, SPSB)Thru-bolt (SB)
Cap Screw bolt 12-pt (SPSB)Cap Screw bolt 12-pt (SPBB)
Cap Screw (SSP)
Cap Screw bolt 12-ptCap Screw bolt 12-ptCap Screw bolt 12-ptCap Screw bolt 12-ptCap Screw bolt 12-pt
Cap Screw bolt 12-ptCap Screw bolt 12-ptCap Screw bolt 12-ptCap Screw bolt 12-ptCap Screw bolt 12-pt Cap Screw bolt 12-pt
70 ft lbs 65 ft lbs65 ft lbs65 ft lbs50 ft lbs65 ft lbs50 ft lbs70 ft lbs70 ft lbs
75 ft lbs25 ft lbs75 ft lbs75 ft lbs45 ft lbs
90 ft lbs90 ft lbs90 ft lbs60 ft lbs30 ft lbs
275 in. lbs
8740 STEEL ALLOY (180,000 p.s.i.)
H-11 TOOL STEEL ALLOY (220,000 p.s.i.)
AMS5844 STEEL ALLOY (280,000 p.s.i.)
Torque Specs
Proper bolt torque: Torque rod bolts to 10 ft lbs on both sides, then torque to proper spec with one pull.
*Thru-bolt torque specs based on steel rods using motor oil.*Cap Screw 8740 torque specs based on steel rods using oil*Cap Screw H-11 torque specs based on steel rods using anti-seize.*AMS5844 torque specs based on steel rods using anti-seize. * Bolts for titanium rods require special lubricant available from Crower.
Specify -8 after part number if four cylinder, -12 if six or -16 in eight cyl. Note: If using stretch method, Crower recommends .004" to .006".
Rod Bolts, & Nuts
For technical support call 619-661-6477 (7am to 5pm PST) • 24 hour fax: 619-661-6466 • www.crower.com 197
Note: Custom orders available, specify bore, pin dia and length.Customer needs to specify width or overall length.
ALIGNMENT SLEEVESCrower hollow dowel connecting rod
alignment sleeves are precision ground from high grade alloy. Sold by the piece.
Part No. DimensionDescription5⁄163⁄8
7⁄16
90850-190851-190852-1
Rod alignment sleeve (1 only)Rod alignment sleeve (1 only)Rod alignment sleeve (1 only)
ROD BUSHINGSCrower uses premium aluminum-bronze one piece billet bushings in all of the rods we manufacture. These high quality bushings are sold separately, by the piece.
Note: For steel rods with 8740 or H-11 bolts use straight motor oil.Note: Crower #90898 is same as Loctite #51609
9089790897C90898
Crower Titanium Lube (Titanium rods) 1⁄2 oz tub Crower Titanium Lube (Titanium rods) 2 lb, 10 oz container
Heavy-Duty Anti-Seize (Steel rods w/H-11 or AMS5844)
Part No. Description
ROD BOLT LUBRICANTIn order to achieve proper preload during rod bolt installation, it is important to use the lubricant that is recommended for that particular bolt and rod combination. •Steel rods with 8740 bolts must use straight motor oil as lubricant.•Steel rods with H-11 or upgraded AMS5844 bolts must use Anti-Seize (#90898). •Titanium rods with H-11 or AMS5844 bolts must use special Crower titanium lube (#90897).
BushingsPart No. DimensionDescription
90912-190922-190926-190927-190927N-190940-190944-190947-190966-190975-190980-190984-190990-190994-1
Ford, Aluminum-BronzeCustom, Aluminum-Bronze Import, Aluminum-Bronze
SB Chevrolet, Aluminum-BronzeSB Chevrolet, Alum-Bronze (small O.D.)
Ford, Aluminum-BronzeFord, Aluminum-Bronze
Import, Aluminum-BronzeVW, Chrysler, Honda, Alum-Bronze
Ford, Aluminum-BronzePontiac, Aluminum-BronzeMopar, Aluminum-Bronze
BB Chevrolet, Aluminum-BronzeMopar, Aluminum-Bronze
.912" –
.826"
.927"
.927"1.040".944".748".866".975".980".984".990"
1.094"
For technical support call 619-661-6477 (7am to 5pm PST) • 24 hour fax: 619-661-6466 • www.crower.com198
Prev
ious
W.O
. No.
: ___
____
____
____
____
____
_Cu
stom
er: _
____
____
____
____
____
____
____
_Co
mpa
ny: _
____
____
____
____
____
____
____
__Ad
dres
s: __
____
____
____
____
____
____
____
____
____
____
____
____
____
____
____
____
____
_Ph
one:
___
____
____
____
____
____
____
____
__Fa
x: _
____
____
____
____
____
____
____
____
__Em
ail: _
____
____
____
____
____
____
____
____
_
Cent
er to
Cen
ter L
engt
hBi
g En
d H
ousi
ng B
ore
Big
End
Wid
thPi
n En
d Bo
rePi
n En
d W
idth
Ove
rall
BE W
idth
Bolt
to B
olt W
idth
BE O
ffset
BE O
ffset
Big
End
Ring
Dia
met
erBe
am W
idth
Tang
Pos
ition
ing
Tang
Wid
thTa
ng D
imen
sion
Rib
to R
ib W
idth
Mea
sure
men
t in
inch
es o
r mill
imet
ers
Engi
ne M
ake:
___
____
____
____
____
____
____
_No
. of C
ylind
ers:
___
____
____
____
____
____
__Cy
linde
r Bor
e Si
ze: _
____
____
____
____
____
___
Targ
et W
eight
: ___
____
____
____
____
____
____
Max
RPM
: ___
____
____
____
____
____
____
___
Max
Hor
sepo
wer: _
____
____
____
____
____
____
Turb
o/Bo
ost:
____
____
____
____
____
_p.s
.i./b
arNi
trous
Oxid
e: _
____
____
____
____
___
HP S
hot
Quan
tity
Desi
red:
___
____
____
____
_
I-Bea
m
H-Be
am
Prem
ium S
teel
9
4 Ser
ies
T
itaniu
m
Crowerod
FormFA
X CO
MPL
ETED
FO
RM T
O 6
19-6
61-6
466
EMAI
L: e
ngr@
crow
er.c
om
A.*
B.*
C.*
D.*
E.*
F. G.
H.
I. J. K. L. M.
N.
O.
*Req
uired
PHO
TO C
OPY