Quick Start Guide Rockwell ControlLogix / CompactLogix PLC

Connecting to Omron 3G3MX2 AC Drive with EtherNet/IP

 

Revision 1.01

08/04/2011

SectioThis docconfigurControlLCompacrequired

For mor3G3AX-I36I.

Goal: AfollowingInput Asfrequenc

n 1: Introcument detared with a 3Logix or CoctLogix PLCd to make a

e detailed iMX2-EIP-A

A connectiong steps, usissembly 70)cy of the AC

oduction ails the ste

3G3AX-MX2mpactLogix

C will be use connection

nstructionsA EtherNet/

n will be esing the Bas). A sampleC Drive from

ps necessa2-EIP-A Ethx PLC. Fored, but a Cn.

s regarding IP adapter,

stablished bsic Speed Ce program m the PLC

2 

ary to conneherNet/IP ar the purpos

ControlLogix

the operati, please ref

between a 3Control IO Ais also provladder prog

ect an Omradapter to ases of this dx PLC is ne

ion of the 3fer Omron m

3G3MX2 anAssemblies vided to ramgram.

ron 3G3MXan Allen-Bradocument,

early identic

3G3MX2 ACmanual num

nd a Compa(Output As

mp up / dow

X2 AC Driveadley a

cal in the ste

C Drive andmbers I570

actLogix in ssembly 20wn the

 

 

e

eps

d the 0 and

the 0,

Sectio

1

2

3

4

5

6

n 2: Setu

. Mount th

. Connect

. Apply po

. Connect

. Apply po

. Apply po

Note: A necessar3G3MX2

up

he 3G3AX-M

the 3G3MX

ower to the

the Compa

ower to the

ower to the

motor mayry for this e

2 LCD displ

MX2-EIP-A

X2 to an Et

3G3MX2 A

actLogix to

CompactLo

Ethernet sw

y be connecexample, asay.

3 

EtherNet/I

hernet swit

AC Drive.

an Etherne

ogix.

witch.

cted to the 3s the comm

P adapter o

tch using an

et switch us

3G3MX2 Amanded freq

on the 3G3

n Ethernet

sing an Ethe

AC Drive, buquency is di

MX2 AC D

cable.

ernet cable

ut this is noisplayed on

 

 

 

rive.

e.

t n the

Sectio

Parameparamet

Para

A001

A002

P048

B037

F002

F003

IP Addr

1. Oth

2. C

3. S

4. U

n 3: AC

eter Configters listed b

ameter Nu

1

2

8

7

2

3

ress Config

On the 3G3Mhe EtherNe

Cycle power

Set the IP A

Using a Web

Drive and

uration: Cbelow are th

mber Va

4

4

2

0

1

1

guration:

MX2 AC Drt/IP adapte

r to the 3G3

Address on t

b Browser,

d EtherNe

Configure those that a

alue

Freq

Run

AC

Disp

Acc

Dec

rive, set P1er as 192.16

3MX2 AC D

the PC to 1

navigate to

4 

et/IP Ada

he followingre changed

quency So

n Comman

Drive Actio

play All Pa

celeration T

celeration T

85 to 127. 68.250.127

Drive, allow

92.168.250

o http://192

apter Con

g parameted from facto

Descrip

ource (4 = O

d Source (

on on Idle

arameters

Time

Time

This config.

wing the DC

0.1.

.168.250.12

nfiguratio

ers in the 3Gory defaults

tion

Option Boa

(4 = Optio

Mode (2 =

gures the IP

bus to fully

27.

on

G3MX2. Ts.

ard)

n Board)

= Ignore)

P address o

y discharge

 

 

he

of

e.

5. OC

6. ODth

On the NetwChanges’.

On the 3G3MDrive, allowihe Web Bro

work Config

MX2 AC Dring the DC owser.

uration tab

rive, set P1Bus to disc

5 

, make the

85 to 0, thecharge. Th

settings sh

en cycle pois applies t

hown, and c

ower to the the IP Addr

click ‘Apply

3G3MX2 Aess set from

 

 

y

AC m

Sectio

1. Vtu

2. O5

3. C5

4. R

n 4: Esta

Verify that aurned on to

Open the pr000.

Configure th000.

Right click o

ablishing

ll the comp the device

oject file or

he IP addre

on the Ether

g the Con

ponents arees.

r create a n

ss of the C

rnet module

6 

nection

e connected

ew project

ompactLog

e in the Com

d via Ethern

file for the

gix as 192.1

mpactLogix

net, and tha

CompactLo

168.1.77 us

x, and click

at power is

ogix in RSL

sing RSLog

New Modu

 

 

Logix

gix

ule.

5. InM

 6. C

d

n the CommModule”, an

Configure thialog box, a

municationnd click OK

he connectioand click O

ns group, seK.

on to the 3GK.

7 

elect “ETHE

G3MX2 as

ERNET-MO

shown belo

ODULE Ge

ow in the N

eneric Ethe

 

New Module

 

 

ernet

e

 

7. S

Tags wil

Set the RPI

ll have bee

at 10.0 ms

n created a

, which is th

automatical

8 

he default,

ly for the 3G

and click O

G3MX2 con

OK.

nnection as

s shown be

 

 

elow.

8. CCreate the foollowing coomments in

9 

the Controoller Tags section of RRSLogix 500

 

 

00.

9. C0Create the fo

Hz to 60 Hollowing pro

Hz to 0 Hz. ogram, whiCreate ‘MX

10 

ch will contX2Start’ an

tinuously rad ‘MX2Stop

amp the frep’ as additio

equency froonal Tags.

 

 

m

10. D

11. Ifb3

12. Ufr

Download th

f the 3G3MXit from off G3MX2 AC

Using RSLorom 0 Hz to

he project to

X2 AC Driv on off

C Drive.

gix 5000, too 60 Hz to 0

o the Comp

ve has an eto reset the

oggle the ‘M0 Hz.

11 

pactLogix p

rror, togglee error, or p

MX2Start ta

processor u

e the MX2:0press the ‘S

ag’ to start t

sing RSLog

0.Data[0].2 Stop / Rese

the frequen

gix 5000.

(Reset Erroet’ key on th

ncy ramping

 

 

or) he

g

Sectio

 

n 5: Otheer Conneection As

12 

sembliess

 

 

 

 

 

 

13 

 

 

 

 

 

14 

 

 

 

Terms and Conditions of Sale1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all quotes, agreements, purchase orders, acknowledgments, price lists,catalogs, manuals, brochures and other documents, whether electronic or inwriting, relating to the sale of products or services (collectively, the "Products")by Omron Electronics LLC and its subsidiary companies (“Omron”). Omronobjects to any terms or conditions proposed in Buyer’s purchase order or otherdocuments which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-out notice by Omron. Omron reserves the right to increase or decrease priceson any unshipped portions of outstanding orders. Payments for Products aredue net 30 days unless otherwise stated in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoicessent to Buyer after deducting transportation charges, taxes and duties, and willbe allowed only if (i) the invoice is paid according to Omron’s payment termsand (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month orthe maximum legal rate, whichever is less, on any balance not paid within thestated terms.

5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-tation or sale of the Products.

7. Taxes. All taxes, duties and other governmental charges (other than generalreal property and income taxes), including any interest or penalties thereon,imposed directly or indirectly on Omron or required to be collected directly orindirectly by Omron for the manufacture, production, sale, delivery, importa-tion, consumption or use of the Products sold hereunder (including customsduties and sales, excise, use, turnover and license taxes) shall be charged toand remitted by Buyer to Omron.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactoryto Omron, Omron reserves the right to stop shipments or require satisfactorysecurity or payment in advance. If Buyer fails to make payment or otherwisecomply with these Terms or any related agreement, Omron may (without liabil-ity and in addition to other remedies) cancel any unshipped portion of Prod-ucts sold hereunder and stop any Products in transit until Buyer pays allamounts, including amounts payable hereunder, whether or not then due,which are owing to it by Buyer. Buyer shall in any event remain liable for allunpaid accounts.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellationunless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in deliveryresulting from causes beyond its control, including earthquakes, fires, floods,strikes or other labor disputes, shortage of labor or materials, accidents tomachinery, acts of sabotage, riots, delay in or lack of transportation or therequirements of any government authority.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship

except in “break down” situations.b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall

constitute delivery to Buyer;c. All sales and shipments of Products shall be FOB shipping point (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shallpass from Omron to Buyer; provided that Omron shall retain a security inter-est in the Products until the full purchase price is paid;

d. Delivery and shipping dates are estimates only; ande. Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writingto Omron within 30 days of receipt of shipment and include the original trans-portation bill signed by the carrier noting that the carrier received the Productsfrom Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that theProducts will be free from defects in materials and workmanship for a period oftwelve months from the date of sale by Omron (or such other period expressedin writing by Omron). Omron disclaims all other warranties, express or implied.(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THEPRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIRINTENDED USE. Omron further disclaims all warranties and responsibility ofany type for claims or expenses based on infringement by the Products or oth-erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-gation hereunder shall be, at Omron’s election, to (i) replace (in the formoriginally shipped with Buyer responsible for labor charges for removal orreplacement thereof) the non-complying Product, (ii) repair the non-complyingProduct, or (iii) repay or credit Buyer an amount equal to the purchase price ofthe non-complying Product; provided that in no event shall Omron be responsi-ble for warranty, repair, indemnity or any other claims or expenses regardingthe Products unless Omron’s analysis confirms that the Products were prop-erly handled, stored, installed and maintained and not subject to contamina-tion, abuse, misuse or inappropriate modification. Return of any Products byBuyer must be approved in writing by Omron before shipment. Omron Compa-nies shall not be liable for the suitability or unsuitability or the results from theuse of Products in combination with any electrical or electronic components,circuits, system assemblies or any other materials or substances or environ-ments. Any advice, recommendations or information given orally or in writing,are not to be construed as an amendment or addition to the above warranty.See http://www.omron247.com or contact your Omron representative for pub-lished information.

14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLEFOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANYWAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM ISBASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.Further, in no event shall liability of Omron Companies exceed the individualprice of the Product on which liability is asserted.

15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies andtheir employees from and against all liabilities, losses, claims, costs andexpenses (including attorney's fees and expenses) related to any claim, inves-tigation, litigation or proceeding (whether or not Omron is a party) which arisesor is alleged to arise from Buyer's acts or omissions under these Terms or inany way with respect to the Products. Without limiting the foregoing, Buyer (atits own expense) shall indemnify and hold harmless Omron and defend or set-tle any action brought against such Companies to the extent based on a claimthat any Product made to Buyer specifications infringed intellectual propertyrights of another party.

16. Property; Confidentiality. Any intellectual property in the Products is the exclu-sive property of Omron Companies and Buyer shall not attempt to duplicate itin any way without the written permission of Omron. Notwithstanding anycharges to Buyer for engineering or tooling, all engineering and tooling shallremain the exclusive property of Omron. All information and materials suppliedby Omron to Buyer relating to the Products are confidential and proprietary,and Buyer shall limit distribution thereof to its trusted employees and strictlyprevent disclosure to any third party.

17. Export Controls. Buyer shall comply with all applicable laws, regulations andlicenses regarding (i) export of products or information; (iii) sale of products to“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens ofregulated technology or information.

18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any rightand no course of dealing between Buyer and Omron shall operate as a waiverof rights by Omron. (b) Assignment. Buyer may not assign its rights hereunderwithout Omron's written consent. (c) Law. These Terms are governed by thelaw of the jurisdiction of the home office of the Omron company from whichBuyer is purchasing the Products (without regard to conflict of law princi-ples). (d) Amendment. These Terms constitute the entire agreement betweenBuyer and Omron relating to the Products, and no provision may be changedor waived unless in writing signed by the parties. (e) Severability. If any provi-sion hereof is rendered ineffective or invalid, such provision shall not invalidateany other provision. (f) Setoff. Buyer shall have no right to set off any amountsagainst the amount owing in respect of this invoice. (g) Definitions. As usedherein, “including” means “including without limitation”; and “Omron Compa-nies” (or similar words) mean Omron Corporation and any direct or indirectsubsidiary or affiliate thereof.

Certain Precautions on Specifications and Use1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of theProduct in the Buyer’s application or use of the Product. At Buyer’s request,Omron will provide applicable third party certification documents identifyingratings and limitations of use which apply to the Product. This information byitself is not sufficient for a complete determination of the suitability of the Prod-uct in combination with the end product, machine, system, or other applicationor use. Buyer shall be solely responsible for determining appropriateness ofthe particular Product with respect to Buyer’s application, product or system.Buyer shall take application responsibility in all cases but the following is anon-exhaustive list of applications for which particular attention must be given:(i) Outdoor use, uses involving potential chemical contamination or electricalinterference, or conditions or uses not described in this document.(ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviationsystems, medical equipment, amusement machines, vehicles, safety equip-ment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or prop-erty. Please know and observe all prohibitions of use applicable to this Prod-uct. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUSRISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUTENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THEOVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Omron Companies shall not be responsible for theuser’s programming of a programmable Product, or any consequence thereof.

3. Performance Data. Data presented in Omron Company websites, catalogsand other materials is provided as a guide for the user in determining suitabil-ity and does not constitute a warranty. It may represent the result of Omron’stest conditions, and the user must correlate it to actual application require-ments. Actual performance is subject to the Omron’s Warranty and Limitationsof Liability.

4. Change in Specifications. Product specifications and accessories may bechanged at any time based on improvements and other reasons. It is our prac-tice to change part numbers when published ratings or features are changed,or when significant construction changes are made. However, some specifica-tions of the Product may be changed without any notice. When in doubt, spe-cial part numbers may be assigned to fix or establish key specifications foryour application. Please consult with your Omron’s representative at any timeto confirm actual specifications of purchased Product.

5. Errors and Omissions. Information presented by Omron Companies has beenchecked and is believed to be accurate; however, no responsibility is assumedfor clerical, typographical or proofreading errors or omissions.

OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 001.800.556.6766 • mela@omron.com

OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES54.11.4783.5300

OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERSSchaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROpE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • Tel: +31 (0) 23 568 13 00Fax: +31 (0) 23 568 13 88 • www.industrial.omron.eu

Cat. No. QSG_MX2EIP_ABPLC 08/11 Note: Specifications are subject to change. © 2011 Omron Electronics LLC Printed in U.S.A.