rochester gauges

7/23/2019 Rochester Gauges

1/20209

Gaug

IMPORTANT INFORMATION: Product must be installed

and used in strict conformance with NFPA Pamphlet 58 and/or

NFPA Pamphlet 54 and all other codes, regulations and manu-

facturer recommendations.

Failure to follow these codes, regulations and recommendations

could result in hazardous installation, bodily injury and/or death.

PRODUCT TRAINING SCHOOLS AVAILABLE. Contact a GEC

customer service representative for more information.

WARNING: LP Gas is extremely flammable and explosive.

Devices used for handling LP Gas and Anhydrous Ammonia must

be installed and used in strict conformance with NFPA Pamphlet

58 and 54 and all other codes, regulations and manufacturerrecommendations.


2/20210

How To Order A Gauge

1. Determine Tank Type

Above Ground

Under Ground

Top Mount

AngleMount

EndMount

Side Mount

CenterLine

"H" Dimension "H"

"H"

JR - 4 bolt

A = 2-1/32

SR - 4 bolt

A = 2-1/2

1-1/4 Thread 1 Thread

Top Mount

Angle Mount

Side Mount

End Mount

Tank configuration shown is appropriate for tanks built since the mid-1970s. If yours does not match, please call the Gas

Equipment Company location nearest you and we will be glad to help.

2. Determine Gauge Head Type

3. Determine Tank DiameterD = _______

From Tank Data Plate or

Measure Circumference (in inches) and divide by 3.14

4. Determine Riser Height: H = ________

Note: Riser height is the distance, in inches, from tank surface to

top of mounting flange or coupling for gauge.

5. Determine Mounting Position

Note: Pivot point of float must be at center line of tank.

Footring

Height

Distance

"H" Dimension


3/20

Common Junior & Senior

Float Assemblies - Top Mount

211

Adjustable Liquid Level Gau

Here is an adjustable, magnetic, liquid-level gauge which makes it a snap

to quickly and economically replace non-functional LP Gas gauges in the

field. Because one size adjustable gauges fit many tanks, the One

Gauge greatly reduces the number of spare gauges you need to stock.

The One Gauge is UL listed for LP gas service.

JuniorBrass Threaded

Adjustable Gauge

1 14" NPT Threaded

Senior, 4-Bolt Adjustable Gauges

Assembly Instructions

Junior, 4-Bolt Adjustable Gauges

1" NPT Threaded

Part # Adj. Stem Length Application

0049S02159 12 12 to 19 34 Above Ground


0049S02207 12 12 to 19 34 Above Ground


0049S02203 12 12 to 19 34 Above Ground


0049S02160 12 14 to 19 34 Above Ground

Part # Tank Diameter

6857S11009 24

6857S13759 30

6810S14379 32

6857S17009 37.5

B6287-4

B6287-4

B6287-4

B6287-4

OLD GAUGE LENGTH

MARK OR SCRIBE

CENTERSHAFT AS SHOWN

STEP 1:

STEP 2:

ORIGINAL MARK

FROM STEP 1

CUT OFF EXCESS CENTERSHAFT

JUST BELOW MARK AS SHOWN

LOCKNUT GEAR HOUSING

CENTERSHAFT

STEP 3:

"R" LOGO

TO BE LOOSENED

CAREFULLY

RETIGHTEN

CHECK FOR FREE MOVING

PINION AND CLEAR HOLE

SELECT FLOAT ARM

TO FIT TANK

SHAFT IS NOW

RECESSED

INCREASE SUPPORT LENGTH

BACK TO OLD GAUGE LENGTH

TEMPORARILY ADJUST SUPPORT

SHORTER THAN THEMARK ON CENTERSHAFT

**NOTE: THESE ASSEMBLY INSTRUCTIONS ARE GOOD FOR MODEL #'S 6285-, 6287, 7287-, & 8987-

NEW GAUGE TO OLD GAUGE LENGTH

MARK NEW GAUGE

AS SHOWN

ORIGINAL MARK

LINES UP WITH

EDGE OF LOCKNUT

.

.

T A

OSK %

TA

MAX.

AT

N

L IQUID

LEVEL T

NDU O

EVGR

B O

L M

U

E95O

8060

120

100

2 7

5 -

3 3

D I A LNO.

U.S.A.

LAS TX.

UL105

0

U

UB

B

/ 50PP R

R OO

YL

ZI C

H

O

60R

5 0

70

FOR

NOT 50

R O C 40

USE

DO

ING

AS

OF TEX

GAU

TE R

G E S 30IN C .

H E S

FILL

DAL

20

20

TEMP.A 80 90F V L

B6287-4

.

.

T A

OSK %

TA

MAX.

AT

N

L IQUID

LEVEL T

NDU O

EVG R

B O

L M

U

E95O

8060

120

100

2 7

5 -

3 3

D IA L

NO.

U.S.A.

LAS TX.

UL105

0

U

UB

B

/ 50

PP R R OO

YL

ZI C

H

O

60R

5 0

70

FOR

NOT 50

R O C 40

USE

DO

ING

AS

OF TEX

GAU

TE R

G E S 30IN C .

H E S

FILL

DAL

20

20

TEMP.A 80 90F V L

B6287-4

STEP 4: INSERT BRASS BEARING,

0109-00495, THROUGH

OTHER SIDE OF GEAR HOUSING

STEP 5: FLOAT ARM TO BE INSERTED FROM

FRONT SIDE SO THAT SINGLE BLACK

MARK ON FLOAT ARM GEAR FITS

BETWEEN TWO WHITE MARKS ON

PINION GEAR.

STEP 6:

INSERT SCREW, 0040-00479,

WITH #1 PHILLIPS SCREWDRIVER

PROPERLY TIGHTENED

AT

STEP 7:

DIAL SHOULD READ AP PROXIMATELY

45-50% WITH FLOAT ARM AT 90

TO SUPPORT. MOVE FLOAT ARM

UP AND DOWN TO CHECK FOR FREE

MOVEMENT


4/20212

ASME Tank & DOT Cylinder Gauges

Rochester Gauge Information

Rochester gauges are the standard of excellence for measur-

ing LPG levels. Stainless steel bearing surfaces and self-align-

ing bevel gears ensure extremely long life.

The one-piece, die-cast plastic gear housing is designed to

protect gear operation. The nitrile float is another exclusive

development of Rochester engineers. This lighter float lets

Rochester use a lighter counter weight which lengthens gauge

life particularly where vibration is a factor. Dial chambers are

hermetically-sealed, moisture-proof and easily replaced with-

out exposing the contents of the tank.

The one-piece gauge head is die cast from a high-tensile

strength aluminum alloy. All Rochester 6200 Series gauges

are UL listed for LP gas service.

Senior, 4-Bolt Gauges

Furnished with gasket, dial, and mounting bolts.

#traP le*criCtloB onitpircseD tloBgnitnuoM

0826

2 1/2"

gnitnuompoT

)4( 5/ 61 42-"3826 ntuomelgnarodne,ediS

0926 Top mounting with 4" dial

3962 Side, end or angle mount

with 4" dial

Junior, Threaded Gauges

#*traP onitpircseD exH

1827 ngitnuompot,daehcniZ

4827 ntuomelgnarodne,ediS"2

Junior, 4-Bolt Gauges

Furnished with gasket, dial, and 4 mounting bolts.

#traP le*crictloB onitpircseD tlobgnitnuoM

18262 1/ 23

gnitnuompoT)4( 1/4 82-"

4826 ntuomelgnarodne,ediS

*Measured diagonally

*Measured diagonally

1-1/4" NPT Threaded

#*traP onitpircseD exH1837 tnuompoT

4837 ntuomdnE"2

1" NPT Threaded

#*traP onitpircseD exH

1898 tnuompoT "2

3/4" NPT Threaded

*Use B prefix for Brass head gauge, ie: B7384 Brass Head Gauge


5/20213

NH3 Gaug

The A6200 series gauges are designed to withstand the corro-

sive rigors of NH3 service. The A6400 series is all-stainless-steel

construction designed to withstand NH3 with chemical addi-

tives. All A prefix gauges are UL listed for NH3 service. These

gauges come standard with direct-reading percentage dials.

A6200 Series Gauge

#traP onitpircseD

84810S3235 orinuJ

20000S2005 orineS

Replacement NH3 Dials

Junior

, 4-Bolt GaugesFurnished with gasket, dial, and 4 mounting bolts.

#traP onitpircseD

1826A .gnitnuompotroF

.slaidgnidaer-tceridevirdottengamdradnatssedulcnI

4826A g.nitnuomelgnarodne,edisroF

#traP onitpircseD

0826A .gnitnuompotroF

.slaidgnidaer-tceridevirdottengamdradnatssedulcnI

3826A g.nitnuomelgnarodne,edisroF

Senior, 4-Bolt Gauges


SeniorN-Serve Gauges

All stainless steel construction.


#traP onitpircseD ertemaiDknaTroF

21000-0846A

eguaGevreS-N

"64

31000-0846A 1"4

For top mounting,

#traP onitpircseD

55800-5100 orinuJ

63800-5100 orineS

Replacement Gaskets - NH3 Compatible


6/20214

Lift Truck Gauges

Junior, 4-Bolt Gauges

#ledoM rednilyC

eziS gnitnuoM l #aiD

23-4826.bl41

.D.I"9

lasrevinU 23810S3435

93-4826 altnoziroH 89710S3235

5-1826 alcitreV 91810S3235

33-4826

.bl02

.D.I"21


42-4826 altnoziroH 89710S3235

54-1826 alcitreV 81810S3235

43-4826

33 1/2 .bl

.D.I"21


42-4826 altnoziroH 89710S3235

84-1826 alcitreV 02810S3235

53-4826

34 1/2 .bl

.D.I"21


42-4826 altnoziroH 89710S3235

94-1826 alcitreV 12810S3235

64-4826

.bl06

.D.I"41


54-4826 altnoziroH 89710S3235

05-1826 alcitreV 71810S3235

54-4826

.bl001

41 1/2"

latnoziroH 89710S3235

83-1826 alcitreV 31810S3235

93-1826 alcitreV 41810S3235

74-1826 alcitreV 61810S3235

#ledoM rednilyC

eziS gnitnuoM laiD

1204-4837 bl5.34,5.33,02 alsrevinU 91520S4175

This gauge measures the liquid contents of a horizontally mount-

ed lift truck cylinder. The gauge has a second scale for use when

the tank is stored vertically which reads OK or ADD.

The gauge head accepts a snap-on Junior dial and has 1 38"

[35] hex wrenching flats. The gauge support, center shaft and

float arm are constructed of a propane compatible thermoplas-

tic polymer material. This construction reduces the number of

parts and improves reliability and accuracy.

Junior, Polymer Construction Gauge

3/4" NPT Threaded

Perfect for most forklift cylinder replacement.


7/20


8/20216

Motor Fuel Gauges & Farm Tank Gauges

Motor Fuel Gauges

Farm Tank Gauges

For correct float-rod sizing and installation, refer to the figure below.

These lever-action gauges are designed for use in stationary

farm tanks or other tanks with flat heads. They are to be

mounted on the centerline in the middle of the head. The max-

imum recommended float length is 48".

#traP onitpircseD onitacilppA

3817F -eguaGnoitcA-reveL1 1/2 TPN"

htiwsknatrosknatmrafyranoitatS.sdaehtalf

50600S1005slaidlanoitcarF

s.knatyranoitatS

50600S2005 s.knatelibomrofdenepmadnoitarbiV

12 Tank height minus 2"

14

File notch near end of float rod

Tank Tank Rochester Gauge Head Mounting Dial

Dia.(") Mfg. Part # Stamp Angle Type*

8 H8LN 320Manchester 6244-00600 B** DR

Brunner 6244-605 H8AB Lower 45 DR

Brunner 6244-00032 DRH10AB 315

10 Brunner 6244-00046 DR

Manchester 6244-00353 H10C CENTER

DR

Brunner 6244-00047 DR

Brunner 6244-00094 H12C CENTER TS

Manchester 6244-00354 DR

12


Brunner 6244-00097H13C CENTER

TS


Manchester 6244-00334H14A 45

DR

Manchester 6244-00599 H14LN 320 DR


Brunner 6244-00100H14C CENTER

TS

13

14


Brunner 6244-00105 H16A 45 TS




Manchester 6244-00604 B** DR



DR




16

18



DR

Brunner 6244-00052 DRH20C CENTER


20


Manchester 6244-00181 H24A 45

DR

Brunner 6244-00073 DRH24C CENTER


24

30 Brunner 6244-00085 DRH30C CENTER

Manchester 6244-00384 DRH13LN 320


Brunner 6244-00343

H22A 45

DR

22H22C CENTER

*DR = Direct Read Dial TS = Twinsite Sender

**B = Brass Head

Zinc head gauge with heavy-duty magnet. Ideal with remote

reading replaceable Twinsite Sender.


9/20217

Bulk Storage Gaug

Specify prefix for appropriate dial & mountingDial PrefixC = Combination LPG/NH3.

Mounting PrefixX = When straddle mounting is required.

Y = When ordering gauge for 2" opening.

M = Special mobile.

V = Vertical tank.

When ordering specify: Liquid product and specific gravity.

Type vessel, inside diameter (in inches) & head type

(ellipsoidal, semi elliptical, hemispherical).

Prefix (see chart).

Model # for mounting location (top, side, 8" or 4" dial).

Trim # according to product compatibility requirements.*

Bolt hole location of mounting flange

If other than standard percent of total volume dial is required.

Top-mounted gauges require dimension from mounting flange

face to tank shell plus shell thickness.

Angle-mounted gauges require tank drawings for computing

proper gauge dimensions.

Rochester Magnetel Liquid Level Gauges are available in 4"

and 8" dial sizes. Standard calibration is percent of total tank

volume.

CombinationLPG/NH3

Straddle mounted

Side, end or anglemounted 8" dial

See trim chart

elpmaxerebmuntraP

xiferP l #edoM m #irT ertemaiD

XC 4236 11 8"01

#ledoM ngitnuoM zeislaiD

11-6336 opT"4

11-9336

elgnarodne,ediS11-2436"8

11-0636 opT

Magnetel Gauge Models

Materials Code/Trim # Chart

#mirT epyT

ecivreS

eguaG

egnalF

taolF

ecnalabretnuoC

gniraeB

troppus

kcolb

&taolF

troppus

gnibut

metS

evird

tengam

llA

rehto

strap

11- HNroGPL 3613epyT

leetssselniats

cniz-leetsllor-dloC

detalp

303epyT

leetssselniats IVocinlA

seires003

sselniats

leets

Trim 11 should be used on containers of 3500 WG or more. Gauges for vertical

tanks require drawings for computing proper gauge dimensions & mounting loca-

tions.

More trim levels available for other products.

Common Magnetel Configurations#traP nkaTfOretemaiD

48-11-2436C 4"8

801-11-2436C 8"01

031-11-2436C 0"31

Special calibration dials are available at extra cost.Please state requirements. Special gauges made to order.


10/20218

Transport Gauges

MagnetelRough Rider Gauges

The Rough Rider is designed to withstand the vibration and

shock inherent in mobile service. Their service life in over-the-

road and off-road transports carrying liquids including LP Gas,

NH3, and cryogenic liquids is unsurpassed. These gauges pro-

vide accurate indications of liquid level at a glance, making in-

convenient rotary gauges obsolete.

Rough Rider gauges are equipped with an exclusive spring

steel shock absorber on the float arm which substantially reduc-

es the stress that can quickly destroy conventional gauges.

Also available with 8" dials upon request.

Other size supports available by special order.

#traP aliD nkatforetemaiD

27-11-9336MC

"4

"27

97-11-9336MC 9"7

48-11-9336MC 4"8

69-11-9336MC 6"9

Specify prefix for appropriate dial & mountingDial PrefixC = Combination LPG/NH3.

D = Insulated extension for CO2 and other cryogenic liquids.

Mounting PrefixM = Special mobile mounting.

When ordering specify: Liquid product and specific gravity.

Type vessel, inside diameter (in inches) & head type

(ellipsoidal, semi elliptical, hemispherical).

Prefix (see chart).

Model # for mounting location (top, side, 8" or 4" dial).

Trim # according to product compatibility requirements.*

Bolt hole location of mounting flange

If other than standard percent of total volume dial is required.

Top-mounted gauges require dimension from mounting

flangeface to tank shell plus shell thickness.

Angle-mounted gauges require tank drawings for computing

proper gauge dimensions.

Common Rough Rider Configurations

EliminatorRotogauge Replacement

1" NPTA direct-reading float gauge that is a direct replacement for

rotary-type, dip-tube gauges in LP and NH3 storage tanks.

Only intended for use in tanks with fixed, liquid-level gauges.

#traP onitpircseD

0044R-3926P ni"44otpusknatyranoitatsroelibomroF

retemaid

0006R-3926P nahtretaergsknatyranoitatsroelibomroF

retemaiDni"06otpu&"44

0027R-3926P pu&"06nahtretaergsknatyranoitatsroF

retemaiDni"27ot

0048R-3926P pu&"27nahtretaergsknatyranoitatsroF

retemaidni"48ot

Ideal for LPG or NH3 bobtails and transports. Also available for CO2 use.


11/20219

Part Number

For Container Inside Diameter

For Use With For Dip Tube

(Ordered Separately)LPG or NH3

For Mobileor StationaryContainers

For StationaryContainers

Only

Standard

Dip Tube

Length

Standard

Dip Tube

Part No.

SideMounted

EndMounted

SideMounted

EndMounted

A9091R 30" - 45" 30" - 75" 30" - 45"

A9092R 46" - 61" 76" - 108" 46" - 61" 46" - 61"

A9093TS* A9093RS 62" - 79" 109" - 147" 62" - 79" 62" - 79"

A9094TS* A9094RS 80" - 99" 80" - 99" 80" - 99"

A9095TS* A9095RS 100" - 147" 100" - 147" 100" - 147"

Ellipsoidal Heads Hemispherical Heads

30" - 45"24"

36"

48"

60"

72"

A9091-M24.0

A9091-M36.0

A9091-M48.0

A9091-M60.0

A9091-M72.0

Bulk Storage & Transpo

1" Rotogages for Large Mobile and Stationary Containers

Rotogages are designed to provide an accurate determination of LP-Gas or anhydrous ammonia container contents. They mount in a stan-dard 1" NPT coupling on large mobile or stationary containers.

To operate the Rotogages, the vent valve is opened and the dip tuberotated slowly from the container vapor space to the liquid space. Thedifference in appearance of the discharge indicates when the liquid levelis reached. Dial readings then indicate the percentage of product in the

container.

Rotogage Dials

PartNumber Service Container Size

A9091-18L LP-Gas All Sizes

A9091-18LX* LP-Gas Over 1200 U.S. gallons

A9091-18N NH3 All sizes

Rotogage Ordering Information

* Supported Design

NOTE: The dip tube must be cut to the required length ( 12" of container inside diameter minus 534").Custom dip tube lengths available upon request.

3/4 Rotogages for Small Stationary and Mobile LP-Gas Containers

Rotogages are designed to provide accurate determination of LP-Gascontainer contents. They may be end or side mounted in a standard 34"NPT coupling on stationary or mobile containers. To guarantee accuratemeasurement, they should not be used on stationary containers thatexceed 60" I.D. or on mobile containers, subject to vibration, with an I.D.

of more than 24".

Part Number For Containerswith InsideDiameter

TankConnection

ValveSeat

Orifice

2070CO2071-L25.7 Up to 40"

34" M. NPTNo. 54

Drill Size2071-L39.7 Up to 60"

Rotogage Dip Tube

NOTE: The dip tube must be cut to the required length ( 12 of container inside diameter minus12"), when mounted on center line of tank.

* Dial permits higher filling level, as per NFPA 58, (1983) Par. 4-5.2.1, Table 4-5.2.1


12/20

R3D Dials - Remote Ready

220

Gauge Dials Junior & Senior

Part # Description

5844S01749 Senior Dial for LPG - For Above ground use

5002S00002 Senior Dial for NH3 - For Above ground use

Part # Description

5364S01951 Junior Snap-On Dial for 8981 Series Gauges5364S02383 Junior Snap-On Dial for 8944 Series Gauges

Part # Description

5343S01992 Junior Universal Dial 33.5# Cylinders

5343S01993 Junior Universal Dial 43# Cylinders

5374S02445 Junior Snap-On Dial 20 & 33.5# Duel Use Cylinders

5714S02591 Junior Snap-On Dial for 7384-4021

Part # Description

5323S01789 Junior Mobile Dial - Fractional

5323S01835 Junior Dial 10-82% for Vertical Cylinders

5323S01852 Junior Dial 5-88% for Vertical Cylinders

5343S01791 Junior Universal Dial 33.5# Cylinders

5323S01824 Junior Universal Dial 43# Cylinders

Part # Description

5323S01749 Replaced by R3D Dial # 5909S02733

5323S01813 Junior Dial for LPG ASME Underground Tanks 5-95%

5323S01848 Junior Dial for NH3 ASME Underground Tanks 5-95%

Part # Description

5909S02733 Rochester Junior Dial / ASME Above ground

5909S02799 Rochester Junior Dial / ASME Under ground

5986S02733 Rochester Senior Dial / ASME Above ground

5987S02787 JY Taylor Style A Dial

5988S02788 JY Taylor Style B Dial

Hermetically-sealed, moisture-proof, replaceable dial chambers are easily and safely removable under tank pressure. UV stabilized Jr.

plastic case will not corrode.

JuniorDirect Read Dials for ASME Tanks

JuniorDirect Read Dials for Mobile 4-Bolt Gauges

Junior

Direct Read Dials for 3/4 NPT Gauges

JuniorDirect Read Dials for 1 NPT Gauges

SeniorDirect Read Dials

5909S02733 5986S02733 5987S02787

5323S01789 5323S01835 5323S01791

5343S01992

5364S01951

5844S01749

5323S01813

5714S02591


13/20


14/20222

Gauge Accessories

#trPa onitpircseD

50000-3000 alid"8roflatsyrcssalG

80400-3000 alid"4roflatsyrcssalgderepmeT

01000-5100 edriuqerowt,latsyrc"8rednuteksaG

15400-5100 altsyrc"4rofteksaglennahC

91000-5100 dellifnolfeT,leetssselniatsdnuow-laripSteksagegnalfgnitnuoM

31400-0400 for 4" dialwercslaidleetssselniatS

10000S3900 etkcarbgnitnuomrebmahclaiD"4

30400-3900 etkcarbgnitnuomrebmahclaiD"8

Replacement Magnetel

Parts

#traP onitpircseD

21000-5136R erttimsnarTam02-4

Magnetel Transmitter

MagnetelMounting Flanges

Center LineBolt holes on center line

StraddleBolt holes span center line

Tank-mounting flanges are not included with Magnetel Gauges

and should be ordered separately.

NOTE: Flanges welded to tank with top and bottom holes on

the vertical centerline are standard with Rochester Gauges.

When the flange is attached so that the bolt holes span the cen-

terline (see drawing at the right), add the prefix X to the

Magnetel gauge model number.

#traP onitpircseD A"" B"" C""

92000-2200

leetSdegroF

21/2 dedaerhTTPN"

egnalFkceN

21/2" 1/2 TPN" 5/ 61"

03000-2200 leetSdegroF

ylnOegnalFgnidleW


ylnOegnalFgnidleW 13/ 61 dleW 5/ 61"

52500-2200

08dehcSTPN"2

.egnalFkceNdedaerhT

nodellatsniebtsuM(

.gfmybeguag

21/2" PTN"2 1/ 61"

"

2

2

2

434"

1"

A

BC

This transmitter is designed to fit Rochester model 6342 and 6360

Magnetel Float gauges with 8" dials. The transmitter provides a

current output of 4-20 mA proportional to the liquid volume in a

horizontal storage tank.

Magnetel Mounting


ylnOegnalFgnidleW


ylnOegnalFgnidleW 1" 21/ 23"1

1"

PTN"2

21/ 23"1dleW

#traP onitpircseD A"" B"" C""

Senior Gauge Mounting


15/20223

Gauge Accessori

Gaskets, LP Gas

Flat Buna N

Screws

#traP onitpircseD

41400-0400 daeHeguaGroinuJrofwercS

spillihProdettolSnoitanibmoC

51400-0400 daeHeguaGroineSrofwercS

spillihProdettolSnoitanibmoC


Stainless Steel for 4" Dial

61400-0400 JR & SeniorrofwercS

Dial Mounting


N-Serv A6480 Series

#traP onitpircseD

40000-5100 etksageguagroineS

70000-5100 etksageguagroinuJ

91000-5100

,teksagdnuowlaripS

daehSSrofdellifnolfet

22000-5100 O-ringeguagroineS

12000-5100 O-ringeguagroinuJ

Weather Cover For8" Dial

Weather Guard for8" Dial

Weather Guard for4" Dial

Weather Guards For Dials

#traP onitpircseD

10000S3200 aliD"8roFrevoCrehtaeW

20000S3200 aliD"4roFdrauGrehtaeW

30000S3200 aliD"8roFdrauGrehtaeW


16/20224

Pressure Gauges

Pressure Gauges

Especially designed in a variety of sizes and construction for the LP Gas & anhydrous ammonia industry.

Liquid Filled Pressure Gauges

NH3 Pressure Gauges

rebmuNtraP

erusserP

egnaR

laiD

eziS

esaC

lairetaM onitcennoC

003-LA8001 0#03-0

"2

leetS

1/4 mottob"004-LA8001

#004-0004-BS8001

1/4 kcab"004-BSS8001

sselniatS

leetS

rebmuNtraP

erusserP

egnaR

laiD

eziS

esaC

lairetaM onitcennoC

0610W 0#6-0

21/2" sselniatS

leetS1/4 mottob"2610W 0#51-0

4610W 0#04-0

948

J1446

J1458

W0164

1008AL-400

Part NumberPressure

RangeDial Size Case Material Connection

2411

0-30# 2

Brass 1/4 M. NPT3226A-3

J1442

Steel

1/4 Bottom

J2042 1/4 Back

2434-2 35 w.c. &

20 oz. (dual) 2-1/2

1/8 hose

2434A-2 1/4 hose

29276 0-35 w.c.Brass 1/4 M. NPT

55750-60#

2J1446

Steel 1/4 BottomJ1448

0-100#5576Brass 1/4 M. NPT

1178 2-1/2

J1458

0-300# 2

Steel 1/4 Bottom

948Brass

1/4 M. NPTJ2058 1/4 Back

J5563 4-1/2 1/4 Bottom

Part

Number

Pressure

RangeAccuracy Overpressure

Temperature

Limits

Dial

Size

Case

Material

Mounting

OrientationConnection

20200 - 20

of Water

+/- 2%

of full scale25 psig 20 to 140 4

Die Cast

AluminumVertical 1/8 F. NPT

MagnehelicDifferential Pressure Gauge

Magnehelic gauge is highly accurate with a guarantee within 2% of full scale. Using simple,

frictionless Magnehelic movement, it quickly indicates low air or non-corrosive gas pressures

either, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No

manometer fluid to evaporate, freeze or cause toxic or leveling problems.Portable Unit Includes: Carrying case, Magnehelic Gauge, 9 ft fo 3/16 I.D. rubber tubing,

standhang bracket and terminal tube with holder.

Standard Accessories: Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rub-

ber tubing adapter and three flush mounting adapters with screws.

Note: Do Not use with Hydrogen gas. Dangerous reactions will occur.


17/20225

Pressure Gauge Accessori

Pressure Gauge Snubbers

Protects pressure gauge from shocks and pulsations.

1449

Part # Description Size

1449 Stainless Steel 1/4 FNPT x 1/4 MNPT

Needle Valves

These valves are high quality, true throttling valves. Unlike most so-called needle valves,

both the body seat and stem are tapered to provide fine, precise control over a wide range

of adjustment without stem galling.

The 1224 may be used as a small, inexpensive shut-off valve between a pressure gauge

and bulk storage container to allow for convenient gauge replacement.

The 1314, 1316 and 1318 provide taper pipe thread by left hand hose connection threads

and are useful in a wide range of torch and fuel burner applications where an accurate throt-

tling action is required.

Part

Number

Inlet

Connection

Outle t

Connection Height Length

1224WA 14" M. NPT 14" M. NPT

1 916" 134"1314WA

916"-18 L.H.18" M. NPT

1316WA 14" M. NPT

1318WA 14" M. NPT 916"-18 L.H.

#traP dnetelnI dneteltuO

233-V 1/4 epipelamef" 1/4 epipelamef"

333-V 1/4 epipelam" 1/4 epipelam"

433-V 1/4 epipelamef" 1/4 epipelam"

533-V 1/4 epipelam" 1/4 epipelamef"

P5503-V 1/4 epipelamef" 1/4 epipelam"

P088-V otlipelbatsujda/wevlavezeeuqS

Rego Water Manometer Kit

The water manometer kit is especially suited for use with low pressureLP-Gas systems. It is ideal for pressure checks downstream of the lowpressure regulator and at the appliances.

PartNumber Description

1212 KIT Flexible Tube Water Manometer Kit


18/20226

Thermometers & Flow Indicator

The distance from the top of the mounting adapter to the end of the vane is the

A dimension. This dimension is dependent on the tee size, as shown above.

Indicates direction of flow of compatible liquids in pipelines at

working pressures up to 600 psig up to 160F. The indicator

must be installed in pipeline tees.

Specify Part Number and A Dimension

Flow Indicator

Other lengths available on special order.

eziSeeT A

noisnemiD

1 1/4 1x" 1/4 1x" 1/4" 1/4"

2" x 2" x 2" 1/4"

2 1/2 2x" 1/2" x 2" 1/4"

3" x 3" x 2" 3/4"

2 1/2 2x" 1/2 2x" 1/2"

2/w 1/2 gnihsub2"x" 43/4"

3" x 3" x 3"

gnihsub"2x"3/w 4 3/4"

3

3

3

4

#traP thgneL

52300-6826 1/4"

57400-6826 3/4"

3

4

#traP

84000S3105

Replacement Dial

A

LP & NH3Bimetal Thermometers

These 2", bimetallic thermometers are commonly used on LP-Gas & NH3 storage tanks, bobtails, and transports. They are rec-ommended for use only with thermowells.

The thermometer is made of type 304 stainless steel, and the

crystal is made out of extra-heavy, curved glass. The aluminum

dial has a white face with large black numbers for easy readabil-

ity. Actuation is by means of a highly sensitive bimetal element,

dampened to minimize vibration, attached to a pointer. The unit

is hermetically sealed.

Standard Features 12" MNPT

Dual Scale Calibration:

-90 to +130F, -70C to +50C, other ranges available

#traP onitpircseD "A"

Dimension

41100-0571

cillatemiB"2

retemomrehT

"4

51100-0571 6"

9-0571 9"

12-0571 12"

.08"

12" NPT Pipe Thread

A


19/20227

Tank Monitoring Equipme

The Centeron transmitter is attached to the tank gauge and accurate-ly measures tank levels and then sends the data to the Centeron con-troller (located inside the house) using robust DSSS wireless technolo-gy. The Centeron tank level monitor (TLM) includes sensing and FCClicense-free RF telemetry capabilities. The sensor head screws on the

existing float level gauge. Low cost installation and no maintenance.Centeron Tranmitter features:1. Magnetically adheres to the tank2. No field calibration3. Applies to domestic and bulk storage tanks4. Reports tank level and outside temperature5. No hard wiring required, wireless

Streamline Distribution With Robertshaw CenteronUsing non-intrusive, wireless tank-level monitors and advanced software, the Centeron system provides accurate, daily listings of tanks ready and

near-ready for fills, making unnecessary trips and emergency fills an expensive thing of the past. Fact is, Centeron can cut your refill trips by up to

50 percent. These unprecedented cost efficiencies make the economical Centeron system an ideal, profit-building solution for both non-degree-

day and degree-day sensitive operations. Its the convenient, money-saving way to streamline your entire LPG distribution process.

The Centeron controller receives wireless signals from Centeron moni-tor and then sends the data to the district host center or to our secure datacenter for use in operations management.Centeron Controller features:1. Uses DSSS broadband technology which is far superior to any other available

2. Easily attaches to any phone3. Will not interrupt a conversation in progress4. Can be remotely programmed for tank level thresholds, call windows

and telephone numbers.5. Unique phase and diverse antenna arrangement eliminates noise, fading

and signal blocking commonly found when using narrow band technolo-gy

Part # Description

5909S02733 Rochester R3D JR Dial

5986S02733 Rochester R3D SR Dial

5987S02787 JY Taylor R3D Style A Dial

5988S02788 JY Taylor R3D Style B Dial

Part # Temperature Sensor Inputs

TM-TC1T Yes 1:1

TM-TC1NT No 1:1

TM-TC4NT No 4:1

TM-TC20NT No 20:1

Part # Intervals in Minutes

TM-GM60 60

TM-GM120 120

TM-GM240 240

Part # Description

TM-MG8-10 Rochester Gauge with 10 ft. cable

TM-JY10-10 J Y Taylor Dial with 10 ft. cable

Gauge Dials

Domestic

Bulk Storage

Controller/Receiver

Transmitters (includes 5 ft. cable)

Part # Description

TM-RES-R Pkg. includes: TM-GM60, TM-TC1NT, 5909S02733

TM-RES-T Pkg. includes: TM-GM60, TM-TC1NT, 5987S02787

Domestic Tank Monitoring Package

Part # Description

TM-RS-228 Pkg. includes: Base Station, Remote Monitor (Dial NOT included)

Consumer Monitor Package

For Domestic applications

Select: 1. Transmitter & specify signal intervals.

2. Controller with or without Temperature sensor.

3. Appropiate type of domestic gauge dial(s).

The data center operates with a Call Block plan. This plan will allow all of your controllers to collectively draw from one block of prepaid calls. A

wide variety of Call Blocks will be offered in order to satisfy all Centeron customers. Inherent benefits of this plan include:

One simple invoice for all of your data center fees Current data for Call Block usage available online

Multiple controllers collectively draw from the same Call Block Reduction in price you pay per call

Refunds available for unused calls upon cancellation of service

Part # Description

TM-PC CABLE Serial interface cable- Controller to PC RS232 port

TM-GMCABLE-5R Additional 5 ft. cable for AG/UG GM monitors available

Accessories5909S02733 5323S02787/88

For Bulk Plant applications

Select: 1. Transmitter & specify signal intervals.

2. Controller without Temperature sensor and for appropi-

ate number of tanks (inputs).3. Appropiate type of bulk storage gauge dial(s).

TM-TC1NT

TM-RS-228

TM-GM60


20/20

rochester gauges

Documents