rittal - data centre efficiency

2

Rittal – Data Centre Efficiency

Savings with IT infrastructure solutions R R

Rittal – Complete IT Competence

Rittal Data Centre Efficiency

iencyUse your efficiency potential for better productivity

With Rittal at your side, you get efficiency times four: Efficiency with

energy, security, availability and synergy. However large or small your

company, the potential savings in your data centre are considerable.

For example, Rittal system climate control will boost energy efficiency

by up to 50 percent. System simplification also offers efficiency potential

v sts by reducing

a taining optimum

fitable

nf

ns for fast operations plexity.

al IT protection for ness security.

h

2

Effic

to boost the cost-effecti

the complexity of purch

performance. Sustainab

production.

ENERGY: UPS and climate cowith a high level of eenergy and costs.

AVAILABILITY: Redundancy, scalabflexibility, thanks to hsolutions cast from tmould.

trol systems ficiency save

ility and olistic e same

eness of your co

sing and operatio

ility is no longer a

SYNERGY: One-stop solutioand minimal com

SECURITY: Optimum physicpermanent busi

mpany. Cut co

n, while main

barrier to pro

ContentsGet more out of it – and overtake your competitors

Rittal, Lampertz and Litcos stand for complete IT competence

ntre. Combine ncy, this mea

ve range of so aximum effic

ost-effective I d permanent

nalysis of IT in provides the

onsistently tra comprehensiv

toring and control, pave the way for a significant optimisation

of efficiency. The aim is to get the maximum possible out of it.

This is not just consistent, it is also intelligent, because it

secures clear competitive advantages in the medium term.

Efficiency

oling

Power

Monitoring

CompleteIT competence

Rittal Data Cen
tre Efficiency
in the data ce

comprehensi

potential for c

availability.

An in-depth a

The results, c

d with efficie

lutions and m

T security an

frastructures

nslated into

ns a

iency

IT

basis.

e moni-

Co

4 Rittal Data Centre Efficiency

unk of efficiency

only effective if you adopt a holistic approach.

ess a whole range of issues, not just one. We

o main electricity consumers – power and

r distribution and IT climate control. These

ntial savings.

High efficiensystems enslosses.

cli

ist ITfree cooling

Optimisation and raising of the cooimplementing aisle containment witechnology

Less power consumpwith optimum energy

Optimised managem

Up to 50 % less pow

+

+

+

=

surable efficiency – UPS systems

inimal investment costs coupled with investment liability due to requirement-oriented, rack-based, odular UPS systems

inimal operating costs with a peak efficiency of 95 % en under partial load and capacitive load. so featuring safe swap, i.e. modules may be swapped th the system operational.

onomic redundancy due to modular scaling

% more efficiency cuts heat loss costs by up to 30 %

to 30 %

vings

3 % light, etc.10 % power distributionand backup

50 % servers

37 % cooling

cies with UPS ure minimal heat

Optimisation of raised-floor cooling offers enormous potential savings with IT climate control.

Measurable efficiency – IT

Utilising cold exterior air to ass+

Up to 50 %

savings

tion by utilising C exploitation

ent with RiZone

er consumption

mate c

chillers

ling tempth integra

RAC

with

ontrol

with

erature by l sensor

systems

IT cooling

Mea

Mrem

MevAlwi

Ec

2

+

+

+

=

Upsa

G

Re

Ri

fo

co

ar

rab yourself a big ch

ducing operating costs is

ttal’s philosophy is to addr

cus in particular on the tw

oling: UPS systems, powe

eas offer the greatest pote

5ntre Efficiency

cienc or intelli t cus

Power and cooling

Servers

Rising energy costs and the growing power consumption (plus increased heat loss) of powerful IT systems causes a significant hike in electricity and operating costs.The escalating operating costs for power and cooling may be significantly reduced with efficient IT infrastructure solutions from Rittal.

Rittal Data Ce

Effi
y f gen tomers


Th e analysis of the specific potential savings in you

Sa

No 1000 5000No 20 50Ele 4,204,800 kW 19,272,000 kWTocoeff

1,974,174 kW/h 9,049,005 kW/h

Tocoim

983,011 kW/h 4,505,448 kW/h

Sa 118,940 545,227Sa 545 2,500

Efficiency upand CO2 emthis is the fofuture. The scentre is irre

en

n

€

t structures a priority can vary

, Rittal views modularity and flexibility

to boosting efficiency. The RimatriX5

ely adaptable to change. This

ed with cost efficiency, by adapting

manded by the corporate

, (energy) costs issions down – rmula for the ize of the data levant.

Effici

CO2 emissio

Cost

ese are sample calculations. Our specialists will be happy to provide a precisr company. Please call us to arrange an appointment.

mple configurations

. of 1 U rack-mounted servers 10 100

. of blades 0 5ctricity consumption/annum 35,040 kW 525,600 kW

tal heat loss of UPS and power nsumption of cooling without iciency improvements by Rittal

16,365 kW/h 246,881 kW/h

tal heat loss of UPS and power nsumption of cooling with efficiency provements by Rittal

10,992 kW/h 122,911 kW/h

vings in €/annum 645 14,876vings in t CO2/annum 3 68

cy

s

Make cost optimisation a management issue

Companies who make efficient cos

significantly in size. For this reason

as central concepts when it comes

makes your IT infrastructure suprem

means maximum availability coupl

ideally to the current conditions de

environment.

7iciency

Big savin wh r r size:

Current

capacity requirements

Scalablecapacity

adjustment

with RimatriX5

Excess capacity

without RimatriX5

cost-effectiveept from Rittal: se the IT infra-hey currently ments grow, rows as well.

modularity.

Rittal Data Centre Eff

Reliable, flexible,The modular concUsers only purchastructure solution tneed. If the requirethe infrastructure gEfficiency through

gs,
ateve you


Energy cos rol

Are the energ control of your data centre exploding?

Want more ef ame server computing power, tailored to

yo idua ow, you can achieve this very easily!

Be Rittal L oncepts offer new framework conditions

for infras s of flexibility, reliability and cost-

eff . Rittal ensive cooling solutions cast from

the mould m-based cooling concepts, IT chillers,

fre ng and planning and assembly through to

commissioning everything from a single source. Modular

concepts, tailor our current requirements, and easily

scalab ee

Free coolingthing. It onlyefficient by cconditions fo

Low DensityYour entry into professional IT climate control

Mid DensityThe tailor-made solution for discerning data centres

High DensityThe most powerful solutions for high-end data centres

Prod

uct

Cooling requirements

aisle containment

with aisle containment

LCP Standard/Smart

LCP Plus/LCP T3+

is a wonderful becomes reating the right r optimum use.

Raised floor ocoling and aisle containment give energy costs the cold shoulder.

Bas

CR

LC

ic s

AC s

P Ex

le to m

olution

ystem

tend

s

s

LCP Inline

ts un

y cost

ficienc

l room
ur indiv
cause

your IT

iciency

same

e cooli

t future need

with

tructures in term

offers compreh

. Rack- and roo

pipework, from

and servicing –

ed precisely to y

s.

der cont

s for climate

y from the s

situation? N

iquid Cooling c

9

l


Totally coo

ete IT competence is synonymous with system ddition to comprehensive advice and planning lexible product spectrum offers tailor-made ll your applications. It goes without saying rehensive solutions also include the complete backed up by reliable, global service.

vel to high-end solutions, gle source:sive product solutions for rack- and room-te control solutions

re such as cold water production, distribution ntd, designed to perfection and installed on

ment

LCP Standard/Plus/Smart

IT chiller

Free cooling

Pipework

Raised floor for cold air supply

3

4

5

6

7

4

3

2

1

3

33

2

4

5

IT cooling

7

Rittal – Complexpertise. In aservices, our fsolutions for athat our compinfrastructure,

From entry-leall from a sin● Comprehen

based clima● Infrastructu

and treatme● Fully planne

request.


Rittal aisle contain

CRAC systems

1

2

5

6

the inlet temperature

8°C

100 %

–15 %

85 %15°C

Inlet temperature Energy costs Inlet temperature Energy costs

Coo

ling

out

put

Coo

ling

out

put

on a minimal area

With direct rack cooling with the Rittal Liquid Cooling Package, only the racks are cooled in a sealed system. This cuts investment costs by up to 60 %.

ng package

75 %

50 %

25 %

0 %25 % 38 %13 % 50 % 63 % 75 % 88 % 100 %

Pow

er c

onsu

mpt

ion

On/O

EC m

fan chnoloctricating ac the ennefit oh the cy) is thed, aner con

Room cooling with an average inlet temperature of 8°C.

Because Rittal allows the inlet temperature to be increased to 15°C, energy costs may be reduced by 15 %. A further increase in the inlet temperature is supported.

Direct rack cooling with Rittal LCP

Rack cooling with LCP and increased inlet temperature

100 %

Efficient Efficient fan testands for “elemotor. Alternacontrol acrossOne major becompared wit(AC technologactually requirelectrical pow

11

Volumetric flow


ff operation

odulation

technologygy is achieved with the use of EC motors. EC

l commutated”, referring to activation of the tivation of the motor coil achieves linear speedtire range.

f linear speed control with EC technology onnection of additional coils for speed control at it adapts efficiently to the volumetric flow d combines this with a significantly lower sumption, as illustrated by the diagram below.

Improved efficiency

LCP with high cooli

With conventional room coolingvolume of air must be permane

Liquid c

Conventional room cooling

Conventional room cooling

by raising

ng output

, a very large ntly cooled.

ooli

ligent control with aisle containment

17000 m3/h

22000 m3/h 100 %

50 %

0

5 m3/h

15 m3/h60 % 15 %

36 % with Rittal aisle containment

the volumetric airflow. Reduce the throughput.

n er area.

● Even with low room heights, maximisation of the raised floor height for cooling air supply without flow losses.

● Undisturbed and uniform intake and distribution of cooling air in the cold aisle guarantees a high level of efficiency.

● Favourable working conditions in the cold aisle thanks to minimal temperature, flow and noise load conditions.

● Connected hardware racks outside of the containment system do not impair cooling efficiency.

Rittal aisle containment (cold aisle) without raised floor● Direct connection of the liquid cooling packages

to an external cold water supply.● Simple laying of pipework in the rack base/plinth.● Homogeneous distribution of cooling air in the

cold aisle guarantees a high level of efficiency.● Favourable working conditions in the cold aisle

thanks to minimal temperature, flow and noise load conditions.

● Connected hardware racks outside of the containment system do not impair cooling efficiency.

● Room heights play only a minimal role.

inment

Step 3

By installing temperature and humidity sensors at all key points in the data centre, the entire cooling circuit may be optimised in terms of energy-efficient operation.

12

Energy saving through intel

100 %

50 %

75 %

0

8°C

15°C 100 %

50 %

0

26 %

Step 1 + step 2 + step 3 = Total cost saving

Raise the water inlet temperature.

Reduce

Rittal aisle containment

Rittal aisle containment (cold aisle) with raised floor● Use of standard inexpensive air circulatio

cooling units. Positioning outside the serv

Aisle conta

Step 1 Step 2


ystems

Einsparung

1216

1832

1000 2000kWh/a

savings

a)

otors

1) Load profile with 5500 operating hours p. a.:0.2 % (110 hrs) at 100 % QN (full load)25 % (1375 hrs) at 65 % QN (partial load)40 % (2200 hrs) at 30 % QN (low load)33 % (1815 hrs) in speed-controlled mode

ree cooling

1000

500

0

20000 4000 6000 8000 10000 12000

Pow

er c

onsu

Volumetric flow

Conven

EC mot

rgy has veergy sential

th free cooling

10 2 3 4 5 6

200

0

0 % 20 % 40 % 60 % 80 % 100 %

4

3

2

1

0

% free cooling

€/kW

Year

s

YearsConventional fan

Rittal EC fan

Intelligent control and the consistent use of energy-saving EC fans saves an additional 40 % of energy over a 5-year period.

Depending on the ambient conditions, an invest-ment in free cooling will pay off during the first year. Even if only 30 % of the heat loss is dissipated via free cooling, the plant will be paid off within around two years.

2000

1500

mpt

ion

High eneThe EC motorspeed, the enrange, the pot

Rittal Data Centre Effici

tional motors

ors

savingsry high efficiency at all speeds. At

aving is around 10 %. In the controsavings are significantly higher.

ency

rated lled

Efficiency with

0

1

2

3

Annual electricity coof various heating puin speed-controlled m

Pumps with speed

Pumps with speed

Pumps with consta

1

2

3

Pump

High energy e1200

1000

800

600

400 ther

mal

pipework s

396

nsumption (kWh/mps (DN 30) ode1).

control and EC m

control

nt volumetric flow

ing/f

fficiency wi

-40 %

13


ncy at all levels

um system reliability when it comes to developing

lutions for power supply and all aspects of power

ovative Rittal power concepts for energy distribution

commodate all your redundancy, scalability and

ments, coupled with maximum efficiency.

Power Modu– the innovafrom Rittal. Mdecentralisetecture (DPAlevel of avaiapplicationsble, requireminvestments

-

er

nal

trained staff

+ Max. availability

+ High level ofefficiency

– Energy costs

– Manpower

– Administrative input

– Installation costs

– Space requirements

ases

Decreases

lar Concept PMC tive UPS concept odularity and

d parallel archi-) ensure a high

lability for critical , as well as scala-ent-oriented

.

The Power System Module PSM is a fully contact hazardproof busbar with several circuits for a redundant powsupply. Plug-in modules maybe inserted and exchanged whilst the system is operatiofor a time-saving solution.

Greater efficie

Rittal offers maxim

future-oriented so

management. Inn

and protection ac

availability require

+ Scalable

+ Flexible

+ For use by

Incre

15cy

s live

Rittal Data Centre Efficien

Alway


1

4

4

5

2

As energy demands escalate, so do the require-

ments placed on the energy supply to racks and

data centres and on the management of power

distribution. The IT power concept from Rittal

combines the requirements of redundancy,

scalability and availability into one system, with

due regard for power distribution and back-up,

with the added benefit of outstanding energy

efficiency.

Modular Power Concept PMC 200

Power Distribution Rack PDR

Power Distribution Module PDM

Power System Module PSM

Power distribution, for fur rmation see Catalogue 32, page 3

1

2

3

4

5
ther info32.
3

ace with PMC 200

3232

32

3232

4040

4040

Example 3PMC 200

nfigured according to ncept with five 32 kW

The minimised construction size of the Rittal PMC 200 concept allows three modules plus bat-tery packs or five modules each with up to 40 kW in one Rittal 482.6 mm (19˝) TS 8 UPS rack.

e and modular design.

nding enclosure!

th PMC 200

Energy saving

Example 3

s and minimal pollution:

97

96

95

94

93

92

91

90

95.5

Effi

cien

cy (%

)
94
95

17Rittal Data Centre Efficiency

Input voltage Input current

With the PMC 200 rotect the critical load, but also safeguard the operating ratio of the UPS. We will u on the most suitable concept.

Example 1 This 120 kW + 120requires the most oredundancy.

ple 2 variant with three 40 kW ules only requires 1/3 of the ut compared with example 1 dundancy purposes.

Example 3 With five 32 kW modules only 1/4 is required for the buffer output of redundancy, compared with a single redundant 120 kW UPS. However, there is no space left in the rack for battery packs, i.e. an additional battery enclosure is needed. PMC 200 is an e regard to energy and

space requiremen w to future expansion. �

With a power factor of almost 1 near the UPS input – regardless of the load at the UPS output – the dimen-sioning of cable cross-sections and protective devices can be reduced, which in turn helps to lower installa-tion costs. Low current distortions (THDi) mean that system reactions at the supply end are reduced.

25 50 75 100

Loading (%)

The high efficiency of the Rittal PMC 200 ensures a considerable reduction in heat loss dissipation. This in turn leads to a significant reduc-tion in the cost of climate control. Partic-ularly in the lower load range, this high efficiency really comes into its own.

concept, you not only p be happy to advise yo

kW solution utput for

ExamThis modoutpfor re

xcellent solution withts and also with a vie

96

PMC 200

Extremely small installation sp

120120

Example 1 Example 2

In examples 1 and 2 we com-pare the space requirements of two non-modular systems for 120 kW output plus redundancy with the modular UPS system Rittal PMC 200 (example 3),

which is cothe 4 + 1 comodules.

Benefits thanks to minimal construction siz�

Maximum performance density in one free-sta

Maximum energy efficiency wi

Redundancy

Power

Example 1 Example 2

Minimal energy consumption means low cost

Flexible scalability

202020

2020

20

202020

20

Simple expansion while operational Output may be expanded from2 to 3, 4 or 5 UPS modules via“hot swap” with the system opational, without having to switcto bypass mode.

odules or more, an l battery rack will be The autonomy may also ly modified to suit your ents.

l PMC 200 modular sys-bines flexible adapta-stomer-specific require-

ith investment reliability h level of availability.

Extremely short MTTR (Mean Time To Repair)The modules are easily exchanged for others of the same type, so the UPS is fully operational again in just a few minutes. After repairing the defective module, it is simply re-inserted, eliminating the need for expensive on-site repairs.

PMC 20

Super-fast service

35

30

25

40

45

50

– 0.95 1.00 0.95 0.90 0.85 0.80 0.75

kVA

kW

– 0.85cap.

PMC 200: (40 kW)kW

/kV

A

cosphi. ind.– 0.90

Capacitive load Inductive load

Output characteris ious power factors

The blue curve shows the constant power output for various different loads, including inductive and capacitive loads. In this way, minimal power losses are achieved in any situation.

bility may a The Rtion to

iability

anagell time

Flexible scalaThe autonomyrequirements.flexible adaptainvestment rel

With remote mon display at a


lso be flexibly modified to suit yourittal PMC 200 modular system com customer-specific requirements w

and a high level of availability.

ment, all the parameters of your UPs.

bines ith

S are

20

er-h

For four madditionaneeded. be flexibrequirem

The Rittatem comtion to cuments wand a hig

0

tics at var

Battery Manager RiBat

ent system for UPS batteries. RiBat can extend of a battery by up to 30 %.

harging for each individual battery.e monitoring per battery.ication of defective batteries.eventive maintenance of batteries.atteries can be restored rather than replaced hing the end of their useful life.tallations may be upgraded.ger replaces the internal SNMP card of the

ery manager RiBat determines all relevant data y voltage, internal resistance, discharge curve, tc. throughout the service life of the monitored

batteries. This data is evaluated and used to control the charging process. RiBat facilitates optimum charging of each individual battery. Battery

TCP/IP

Module

RiBat

Up to 30 % longer

battery life

The managemthe service life

Benefits:● Optimised c● Temperatur● Early identif● Supports pr● Defective b

before reac● Existing ins● RiBat Mana

UPS.

The Rittal battsuch as battertemperature e


ution Rack PDR and ution Module PDM – r management for IT racksstallation of a power supply in the IT rack shock-hazard protection means significantly mbly costs plus a high level of investment

signith the system operationalt staff required

enclosure and wall-mounted distributor ntral power management for IT racks

B smissline system means that customer-ements may be implemented particularly

quickly and easily. Another advantage of this future-safe system solution is its future extendibility and adaptation to altered usage, without the need for lengthy interruptions to operation. The distributors are supplied fully prewired with customer-specific configuration and testing.

● High performance density in the power distribution rack● May be flexibly modified on site using the ABB smissline

system● Optimised customer-specific solutions

ower Distribution Rack PDR and ower Distribution Module PDMnefits:Accommodation of up to eight PDM systemsSub-distribution up to 250 A per phasePDM may be retrofitted whilst the system is operationalA maximum of 32 racks may be fitted to the sub-distributorFully shock-hazard protectedVDE-certifiedCable connection in the PSM rail for maximum planning flexibility482.6 mm (19˝) modules for power sub-distribution of 40 kW in server and network enclosures4 individually fused, 3-phase outletsConnected load 400 V/3 AC, max. 63 A

PDR flexBenefits:● Time savings with easier planning● Cost reductions thanks to easier assembly● Pre-configured/customised installation supported● Faster, more flexible installation options by simply plugging

in the units● All products in the ABB smissline range may be used (such

as circuit-breakers from 6 A to 32 A and various tripping characteristics)

● Residual-current circuit-breaker, surge voltage protector, motor circuit-breaker etc. additionally available.

Power DistribPower DistribCentral powePlug & play inwith completereduced asseconfidence.

● Modular de● Extendible w● No specialis

IT distributionPDR flex – CeUse of the ABspecific requir


PDR/PDM

PPBe●●●●

●●●

●

●●

t r management i SM/PCU system

d m g at individual server levelf ri rgy costs, operators need to be very erf data of their hardware. Active PSM sw and current measurement right down al o slot. This supports targeted data sp ht through to individual equipment ay, ent power consumption of individual erip rdware may be monitored at a

e urrent of the module can be read en in the upper area of the module. slo ay be retrieved online via the m. er limit for the entire module may

also be set. Once this is reached, all LEDs on the active mod-ule switch to red so that no further equipment is connected.

Networking capability of active modules via the CMC-TC systemIn conjunction with the Rittal CMC-TC Processing Unit II, up to 16 active PSM/PCU modules may be managed by TCP/IP via the integral Web interface. Event-controlled linking e.g. of switching states with other CMC-TC sensors (e.g. tem-perature) is also supported.

II

Plug-in modules

TCP/IP

Processing Unit II

P

PSM PSM/PCU system

Green LEDs indicates that power is being supplied to the PSM module, and a low current flow of between 0.1 A and 7 A has been detected on the slot of that module. Other equipment may now be safely connected.

Yellow LEDs indicate an increased current flow of between 7 A and 13 A on the slot. The power consumption of all equipment connected to the module must not exceed 3000 W. Before connecting other equipment, please note its connected load.

Red LEDs indicate that the threshold of 13 A has been exceeded. No further equip-ment must be connected in order to avoid overloading and tripping of the prefuses.

Intelligenwith the RSwitching anDuring times oaware of the pmodules allowto the individulogging and relevel. In this wservers and pglance.Additionally, thfrom a 7-segmThe individualCMC-TC syste

Rittal Data Centre E

powettal Peasurin

sing eneormanceitching utgoingonse rig the currheral ha

overall ct displayt limits m An upp

21fficiency

Plug-in modules

TCP/IP

Processing Unit

SM

system


Huge electricity savingsEasy project planningEnhanced protectionFast installation

High cost efficiency

++++

=

Ha

Eff d results plus cost-effectiveness.

It s vided all parts work together with

op al modules.

To ition and operating costs should be

red rocess that Rittal has perfected to

a f s standard with Rittal, and we have

the while the system is running.

RiZ TC system provides an integral solu-

tion um availability in IT environments of

all

The wirelesswithin Rittal straightforwflexible, for creliability.

sensor network CMC-TC – ard, fast and omprehensive

RiZone is a management platform for all components that make up the infrastruc-ture of a data centre, and is easily incorporated into the System Center Operations Manager from Microsoft.

rdware in view

iciency is a combination of intende

ounds easy, and it is, but only pro

timum interaction between individu

this end, the sum total of all acquis

uced to a justifiable minimum. A p

ine art. Energy efficiency comes a

right tools to achieve optimisation

one in conjunction with the CMC-

for optimum reliability and maxim

sizes.

Complete reliability


itoring system Multi Control concept (CMC-TC) from Rittal rity for all areas of IT. In short, CMC-TC offers ound protection from consequential costs; indi-ty which translates into a high level of availabil- and, above all, flexible. Because of the exten- models, individual monitoring functions may ted and combined. Because it is designed for ularity, the CMC-TC expands to keep pace

pany’s requirements. Benefits include plug & n with patch cables and the automatic detec-. At the same time, the CMC-TC is the central unit for connecting to facility management – re.

less” version, Rittal CMC-TC becomes even easier, faster and more flexible to use. This saves time-consuming cabling work and ensures optimum availability, enhanced productivity, and absolute transparency.

Active Power System Module PSM, Power Control Unit PCU Liquid Cooling Package LCP Video network IP camera Wireless humidity sensorWireless access sensorWireless temperature sensor

1

2

3

4

5

6

Wireless Sensor Network

6

5

3

135

2

2

5

1

3

1

6

46

CMC monThe Computerprovides secucomplete all-rvidual reliabiliity. Preventivesive choice ofbe freely selecmaximum modwith your complay installatiotion of sensorsorganisationaland to the futu

With the “wire


oneone is to convert all messages, sensor read-

ators into a plausible event chain. RiZone he isolated approach to IT and building infra-upporting the two protocols commonly used in management – SNMP and BACnet – we forge a n these two separate worlds. Fusing these two s allows us to optimise the availability, reduc-ty and efficiency of a data centre.

nt platform for all components in the data centre e.lly identifies all active RimatriX5 components configuraf redunda

(to TIA 942).● Thanks to the high lev

software solution mayinfrastructure, from ththrough to the data cesures.

● RiZone is capable of cagement system suchManager from Microsover the availability of

● RiZone supports the pconnection of externa

Zo

MON THU FRI SAT SUNKW

Efficiency exampleTo correspond to the power con-sumption of your data centre, the cooling output must be designed for maximum perform-ance in unfavourable ambient temperatures. As this diagram of weekly operation shows, unless properly managed, a typical cooling system is over-dimensioned most of the time. Here, RiZone saves energy by intelligently adapting the cool-ing output to the power con-sumption, airflow and ambient temperature.

The main aim is efficiency: The symbiosis between IT infrastructure and server world Together, Rittal and Microsoft make it much easier for IT administrators to save elec-tricity. Intelligent control circuits optimise energy efficiency and avoid the

on costs of system through autonomous, ti

of all parameters of the physical infra-

tion from Microsoft and Rittal may be e reference variable “server”.

● Any network management systems may be con-nected via SNMP (Simple Network Management Protocol) with a modified MIB (Management Information Base).

Sub-optimum cooling output

Optimum cooling output

Heat load (IT load)

Microsoft● Monitoring of the

status, output and performance of operating systems

● Monitoring of applica-tions, servers and clients

dimension in monitoring, security and resource efficiency in the data centre.

Rittal RiZThe aim of RiZings and actubreaks down tstructure. By sIT and facility bridge betweespecialist areation, complexi

Benefits:● Manageme

infrastructur● Automatica

to allow fast● Monitoring o


tion.nt data centres up to Tier IV

el of flexibility and availability, a be used to administer physical e single enclosure data centre, right ntre with several hundred enclo-

ommunicating with a server man- as System Center Operations

oft, and exerting a direct influence individual applications.rotocols SNMP and BACnet for the

l devices.

follow-failurespreven
ve action.
Rittal● Monitoring

structure.● The informa

linked via th

A brand new

Ri
ne
TUE WE
D


g expertise of the Rittal “Complete

mpertz, Litcos) helps to minimise

elerate procedures. Rittal generates

m the harmonious interactions within

Complete IT Competence offers a

esence and international service

lier of complete data centres as well

ction systems. Rittal relies on Litcos

u on the implementation of individual

isations and additions to your data

RittalIT infrastrucPerfect systtions for datworldwide. In RimatriX5rack, power,security anding from a ssource.

Cooling Power Security/monitoring Service

IT security rooms

Rack-based IT infrastructure

Data and network technology

Climate control/refrigeration engineering

Power distribution/back-up

Fire protection and extinguisher systems

ture em solu-a centres

, Rital offers cooling, monitor-ingle

LampertzPhysical IT security One-stop suppliers of security-critical data centre structures. Modular IT security solutions comprisingIT rooms, data centres, IT safes and mainte-nance.

LitcosBusiness continuity management One of the leading com-panies in Europe for the analytical consultancy and holistic planning of data centre structures.

R R

Analyses and consultancy, planning

Site management/execution/general contractor

The comprehensive problem-solvin

IT Competence” experts (Rittal, La

interfaces and complexity, and acc

this value-added for customers fro

its own group of companies. Rittal

worldwide alliance with a global pr

power. Lampertz is a leading supp

as physical data and system prote

for planning and advice.


We will also be happy to advise yo

works, such as conversions, optim

centre. Talk to us!

Planning Data centre Room Rack

Security/video/monitoring

Disaster recovery management

Maintenance contracts

Certification

27

Complete IT Comp Team

Consulting and engineering● Site evaluation/risk assessment● Strategic IT advice● System and network analysis● Data centre design● Efficiency analysis and audits● Network planning

In●●

general contractor● Modular IT security rooms● Room technology/raised floor● P● C ineering● R● D● F r systems● A● S

Service● Remote management● Maintenance contracts● Hotline● Automated incident and emergency

management● Relocation management and control● Certification coaching and handling● IT outsourcing, contract reviews

Rittal –the Top

ower distribution/back-uplimate control/refrigeration engack-based IT infrastructureata and network technologyire protection and extinguisheccess protectionecurity/video/monitoring

stallation and commissioningComplete data centresSite management/execution/

etence –

We will be happy to send you further information or advise you in person.

Please send me the following brochure(s):

❑ IT Catalogue

❑ IT News 2009

❑ Catalogue 32

❑ Innovations 2009

❑ System climate control

❑ RiZone (Data Center Management Software)

From:

Surname / first name

Company / customer no.

Department / function

Address

Telephone

E-mail

Enquiries and information

All in all – solutions from Rittal Rittal has one of the largest ranges of enclosures available for immediate delivery. However, Rittal also supplies integrated solutions – up to Level 4. This comprises mechanical installation, power supply, electronic components, climate control and central monitoring. For all of your requirements. Fully assembled and functional.

Wherever in the world you develop and implement solutions for yourself and your customers, we are close at hand. The global alliance between production, distribution and service guarantees closeness to the customer. Worldwide!

R R

Rittal GmbH & Co. KGPostfach 1662

D-35726 HerbornTel. +49(0)2772 505-0

Fax +49(0)2772 505-2319

e-mail: [email protected]

www.rittal.com

Lampertz GmbH & Co. KGIndustriestraße 24D-56472 HofTel. +49(0)2661 952-0Fax +49(0)2661 952-99e-mail: [email protected]

LITCOS GmbH & Co. KG Daimlerstraße 9 D-57299 BurbachTel. +49(0)2736 41234-00 Fax +49(0)2736 41234-01 e-mail: [email protected]

05/0

9 � E

591


rittal - data centre efficiency

Technology

energy efficiency

measurable efficiency

peak efficiency

efficiency times

maximum efficiency potential

big chunk of efficiency

rittal system climate

operating costs