rilu - user manual - pogo-v3 - copy · 2019. 12. 20. · microsoft word - rilu - user manual -...

(03) 8395 2616 www.rilu-e-bike.com.au

USER MANUAL

PO

GO 7-D

POGO 7D

Unit 2, No 2 Caulson Close

Maribyrnong 3032 Melbourne, Victoria

Australia (03) 8395 2616

[email protected]

Rev.1001019.POGO7D-UM2

RILU Trading Ptd


Product Description

Frame: 6061 Aluminium alloy Lightweight Folding Frame Gears: Acera 7 Speed – Shimano Brakes: Front and Rear Disc Brake Stem: Height Adjustable – Aluminium Alloy. Front Fork: High Strength – Aluminium alloy Rim & Tire 20” x 13G x 36H alloy Double wall with wide 4” Kenda tires Seat Post: Quick Adjust Clamp Saddle: VELO Wide Saddle Motor: 36V / 250 W (Thumb + PAS) Display: LED / 5 Modes (Motor Power)

Throttle: Thumb Start (6Kmh – Easy Start) Battery: 36 V / 14 AH (Lithium Ion) Charger: 36V / 2A (Smart charger) Lights: Front & Rear (Independent powered)



Riding Range & Charge Time

Range depending on: Rider weight, riding terrain, weather & level of assistance.

Level 2 Motor Assist: 60 - 70 Km

Level 5 Motor Assist: 40 - 50 Km

Battery charge time is 5-6 Hours

Weight

20 Kg (Bike) net weight

24Kg (Battery Installed)

POGO Rated Load weight is 120Kg


Product Summary

Congratulation on your purchase of a RILU POGO 7D Folding electric bicycle. Your new electric bicycle has two different ways of activating motor power. Throttle

Easy start is designed to get you going on hard starts. For example, when you find yourself stopped at traffic lights in 7th gear you can engage easy start. Easy Start is not a full speed throttle, it is a ‘walk assist’ replacement function that conforms to EN15194

PAS (Assist) Built into your POGO is a “Pedal Assistance Sensor”.

This automatically detect the speed at which you pedal and will automatically moderate the ‘motors speed’ while riding.

By selecting from PAS 0 – 5 on the LCD display you are able to

adjust the amount of ‘motor output power that is automatically given when pedalling is detected by the PAS.


General Usage Summary

RILU recommends you first ride the bike without using any electrical assistance to familiarize yourself with the mechanical

gearing and breaking system of your POGO.

ONLY

USE BIKE PUMP


Turning POGO (ON & OFF)

Default Motor Assistance Level

Turn “ON” LCD backlight

HOLD “+“

Default PAS MODE “low”

Hold “ M ”

Reduce Assist to ‘0’ while moving/pushing your pogo

to avoid any sudden unexpected movement.


LCD Summary Function

Reset - Trip Meter

Hold “ + & M ”


PAS & Throttle OFF – Mode O

Set PAS Motor Assistance to MAX (5)

6Km/h – Walk Assist Function

Only use Assist ‘5’ once you are confident with riding your POGO.

Only use ‘Walk Assist’ when you are walking the bike up and incline, do not

use while sitting on the bike.

Press “ + ”

Hold “ - ”

Press “ - ”

Set ‘0 Assist’ while moving/pushing your pogo

to avoid any sudden unexpected movement.


Understanding Battery Capacity Meter

The battery capacity gauge is an approximate estimation of battery capacity based on a real-time voltage reading of the battery pack. There are several factors that may affect the accuracy of the reading such as cold weather, steep inclines or rough terrain. When the motor is under heavy load the battery gauge will ‘sag’ showing an underestimated capacity reading. The gauge will correct itself after the heavy load is lifted.


Battery Low – Flashing Warning

When battery LED is Flashing Battery charge level is


Folding Guide

Step 1 - Fold pedals Down

Reduces risk of damaged during transport and storage

Step 2 - Align the pedals

Chain ring – Pointing to the front of the bike.

HOLD “ - ”


Step 3 - Unlock ‘Folding Safety Latch’

Step 4 - Pull ‘Folding Lever’ forward


Step 5 - Fold handlebar stem

● TWIST (RIGHT) (Stem lock) ● Fold (DOWN) (Stem latch)

Step 6 - Folded POGO


Adjusting - Folding Clamp

Over time you may need to adjust the folding clamp if you are unable to fully close the clamp before riding or if the folding lock is loose and

doesn’t grip the frame.

v

TIGHTEN LOOSEN


Adjusting - Gear Quick Adjustment

RILU advises using a bike service stand when performing gearing and breaking adjustments as it will be easier when the bike is raised off the ground.

Electric bicycles are heavier than regular bicycles please ensure your bike stands weight rating meets the 25Kg requirement of your POGO

TURN OFF electric system when working on gearing and breaking to avoid any unexpected motor power.

TURN OFF electric system when working

on POGO


Gearing Adjustment - Uneven Shifting / Slipping

If you experience uneven shifts or slippage in the lower gears, where the chain jumps from gear #2 to gear #3 unintentionally. Try to adjust

the derailleur using the following method to improve shifting.


Gearing Adjustment – Gear #7 Pulley Alignment


Gearing Adjustment – Gear #1 Pulley Alignment


Motor - Change Tire

Step 1 Step 2 Cut - Cable Tie Unplug - Motor Cable Step 3 Step 4 18mm Spanner Pull back derailleur

Step 5 Wheel nut arrangement


Motor – Service Notes


Battery - Charger Warnings

The charger will warm up during charging. Ensure charging takes place in a well-ventilated area.

DO NOT cover the charger, nor the battery during charging.

Battery – Charging Error

Contact your dealer for support if you experience the above issue if battery not receiving charge.

Battery – Storage Guide


Pedal Assist Sensor (PAS) – Location & Diagnostic

PAS - Location The pedal sensor is a one-piece unit which is located on the left side of the bottom bracket.

PAS - Diagnostic

If you are riding the bike in Level 1 – 5 and do not experience any motor power. Step 1 - Stop riding the bike

Step 2 - Step off the bike and stand beside and lift the rear wheel off the ground.

Step 3 - Hold the + (UP) button on the Display to activate 6Km/h walk function

Step 4 - If the motor works using 6km/h but does not when pedalling in PAS 1 – 5 you may have a damaged pedal assist sensor.


Step 5 - Check the pedal assist cable is not damaged from impact.

Step 6 - Check the pedal assist sensor LED flashes The LED is located at the base of the sensor. It will flash RED 12 times when you rotate the pedal 360 clock-wise

Step 7 - Check the O-Ring spacers are correctly installed and check that there is NO GAP between the PAS sensor and the crank

12X


Thumb Throttle – Location & Function

RILU advises riders to avoid ‘hard starts’ that involve applying full throttle while on an incline. RILU recommends having the bike in motion before engaging the

throttle to prolong the life of the motor.

s

Thumb Throttle – Loose

If you find the throttle loose, please tighten the a 4mm Allen screw located at

the base of the LCD.

4mm

rilu - user manual - pogo-v3 - copy · 2019. 12. 20. · microsoft word - rilu - user manual -...

Documents