HUNTER PLANT OPERATOR TRAINING SCHOOL

www.hpots.com.au +61 2 4990 2588

Why is rigging training

Important to crane & heavy

machinery operators ?

What sorts of things do you

need to know and get

trained on?

Rigging training gives you some

of the most important skills you

need to learn when operating

heavy machinery. The safety

comes first and foremost when

you are an operator, as you may

know. Properly learning how to

rig heavy machinery can prevent

hazardous accidents from

happening, thousands of dollars

in damages, and law suits and job loss. It is a crucial part of the training you should get

when you're going to be a heavy machines operator, and one of the first things any

company will teach you.

As a heavy machine operator, you have many duties and a lot of things can go wrong.

This is why you must have a lot of training to ensure that you are qualified for the

position. There are many things that can go wrong while operating heavy machinery,

and rigging training aims to cover all of the areas that could possibly go wrong.

Some aspects of training

1) Probably one of the most harmful hazards in crane procedures is the accidental drop.

"Position load" is easily the most standard reason for these accidents. This happens

when you find issues with the position from the load and also the ground. The very best

policy would be to keep your position under 10% and ideally at zero. When the position

HUNTER PLANT OPERATOR TRAINING SCHOOL

www.hpots.com.au +61 2 4990 2588

surpasses 10% the burden can slip leading to an accidental drop.

2) A vital aspect of rigging training is learning how to choose the correct equipment,

wires and ropes. Wire slings have to be looked over for worn wires, the finishes for

corrosion and breakage, kinks, crushed wires and relaxing strands. Chain slings are

utilized with very heavy loads and when it's hot because hot temperatures don't damage

them very easily. When utilizing a sling make sure to look into the places that metal rubs

metal to search for possible damages from the rubbing.

3) Metallic mesh slings can be used with loads which have sharp edges because they

do not cut them as quickly. Plus, the big top of the mesh creates high weight-bearing

capacity. An artificial sling is easily the most flexible sling and it is used when loads

have to be protected against damage because of sensitive surfaces. Their versatility

also reduces stress and harm to rigs.

90% of crane accidents occur because of human error. Crane and rigging operators

have 1000's of dollars in equipment and inventory together with the lives of co-

employees in their hands. Proper crane safety and rigging safety training is imperative

in each and every place of work that utilizes this equipment.

I hope this article was helpful and informative in explaining to you why heavy machine

operators and crane operators need to have extensive rigging training before they are

on the job. At the end of the day, these companies have to watch out for their best

interests, as well as the safety of everyone involved.

Being a crane operator has many benefits, and the pay is pretty good. After you

complete your training, you will become a valuable asset to the company you work for.

With rigging training, you will be an important member of the team, good luck to you!

If you'd like to find out more about rigging training, what's involved and how to apply for

it, you can get up-to-date information from the Hunter Plant Operator Training School

website at http://www.hpots.com.au.

There are many accredited institution that offer

rigging training to people who

would like To Work in this field. The advantage

of a HPOTS training program lies in

our instructor's Ability to provide industry

knowhow and our Small class size.

And, our five day course Structure

means you gain your accreditation sooner.