rgb-dmx-5c-xlr 5 channel rgb dmx decoderrgb/w or cdw led strip w power supply 12-36vdc l n...

1
RGBDMX5CXLR917 | P1 15024 Staff Ct., Gardena CA, 90248 [email protected] | www.corelightingusa.com T: 888.737.9192 | F: 888.789.4643 RGB-DMX-5C-XLR SPECIFICATION SHEET JOB NAME: LOCATION: QUOTE/REF#: ■ DMX512 RDM decoder ■ Metal housing, digital display ■ DMX in/out ports, RJ45, XLR, normal screws ■ Total 5 PWM output channels, common anode ■ PWM output resolution ratio 8bit, 16 bit settable ■ Output PWM frequency from 500Hz ~ 9K Hz settable ■ Output dimming curve gamma value from 0.1 ~ 9.9 settable ■ Decoding mode settable FEATURES RGB-DMX-5C-XLR is a DMX decoder with 5 channels, 8A per channel constant voltage output and available in 12VDC and 24VDC. Abundant DMX signal input and output ports are available for this RGBW DMX controller including XLR, RJ45 and screw DMX. RDM bi-direction communication function enables the DMX512 master console to detect and display decoder information and set DMX address. 5 Channel RGB DMX Decoder SPECIFICATIONS (RECEIVER) INPUT VOLTAGE INPUT SIGNAL OUTPUT VOLTAGE OUTPUT PWM CHANNELS OUTPUT CURRENT OUTPUT WATTAGE OPERATING TEMPERATURE DIMENSIONS 12 ~ 24V DC DMX512 12 ~ 24V DC 5 8A per channel 5 x (96W-192W) -20ºC ~ 50ºC LxWxH (164mm x 73mm x 38mm) DIMENSIONS WIRING INSTALLATION MOUNTING Select a suitable and proper location to mount the DMX decoder. Consider distance of transformer and LED fixture from controller to determine appropriate wire gauges. ! THIS PRODUCT IS ONLY TO BE INSTALLED BY A QUALIFIED TECHNICIAN IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE YOU BEGIN Make sure the controller has the proper voltage and wattage for the intended job. Check wiring and make sure they match the diagram on this guide. SAFETY & WARNINGS ■ Install this product in accordance with local and national electrical codes. ■ This product is rated for indoor use, avoid installing outdoors. ■ Make sure this product is mounted in a well ventilated area to avoid over-heating ■ Make sure power from main breaker is off before installing to avoid risk of electrical shock. 164MM 73MM 38MM 1 2 3 4 5 6 7 8 3 5 4 GND GND V+ V+ 1/R- 2/G- 3/B- 4/W1- 5/W2- + Back Enter Up Down D+ D- D+ D- GND 1 2 3 5 4 1 2 1 2 3 4 5 6 7 8 DMX Master Console W Power Supply 12-36VDC L N 110V-230VAC 1 2 3 4 5 6 7 8 3 5 4 GND GND V+ V+ 1/R- 2/G- 3/B- 4/W1- 5/W2- + Back Enter Up Down D+ D- D+ D- GND 1 2 3 5 4 1 2 1 2 3 4 5 6 7 8 RGB/W or CDW LED strip W Power Supply 12-36VDC L N 110V-230VAC RGB/W or CDW LED strip

Upload: others

Post on 27-May-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RGB-DMX-5C-XLR 5 Channel RGB DMX DecoderRGB/W or CDW LED strip W Power Supply 12-36VDC L N 110V-230VAC RGB/W or CDW LED strip . Title: RGB-DMX5C-XLR Created Date: 4/5/2018 4:42:49

RGBDMX5CXLR917 | P115024 Staff Ct., Gardena CA, [email protected] | www.corelightingusa.comT: 888.737.9192 | F: 888.789.4643

RGB-DMX-5C-XLR

SPECIFICATION SHEETJOB NAME:LOCATION:

QUOTE/REF#:

■ DMX512 RDM decoder■ Metal housing, digital display ■ DMX in/out ports, RJ45, XLR, normal screws■ Total 5 PWM output channels, common anode■ PWM output resolution ratio 8bit, 16 bit settable■ Output PWM frequency from 500Hz ~ 9K Hz settable■ Output dimming curve gamma value from 0.1 ~ 9.9 settable■ Decoding mode settable

FEATURES

RGB-DMX-5C-XLR is a DMX decoder with 5 channels, 8A per channel constant voltage output and available in 12VDC and 24VDC. Abundant DMX signal input and output ports are available for this RGBW DMX controller including XLR, RJ45 and screw DMX. RDM bi-direction communication function enables the DMX512 master console to detect and display decoder information and set DMX address.

5 Channel RGB DMX Decoder

SPECIFICATIONS (RECEIVER)

INPUT VOLTAGE

INPUT SIGNAL

OUTPUT VOLTAGE

OUTPUT PWM CHANNELS

OUTPUT CURRENT

OUTPUT WATTAGE

OPERATING TEMPERATURE

DIMENSIONS

12 ~ 24V DC

DMX512

12 ~ 24V DC

5

8A per channel

5 x (96W-192W)

-20ºC ~ 50ºC

LxWxH (164mm x 73mm x 38mm)

DIMENSIONS

WIRING INSTALLATION

MOUNTINGSelect a suitable and proper location to mount the DMX decoder. Consider distance of transformer and LED fixture from controller to determine appropriate wire gauges.

! THIS PRODUCT IS ONLY TO BE INSTALLED BY A QUALIFIED TECHNICIAN IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES.

BEFORE YOU BEGINMake sure the controller has the proper voltage and wattage for the intended job. Check wiring and make sure they match the diagram on this guide.

SAFETY & WARNINGS■ Install this product in accordance with local and national electrical codes.■ This product is rated for indoor use, avoid installing outdoors.■ Make sure this product is mounted in a well ventilated area to avoid over-heating■ Make sure power from main breaker is off before installing to avoid risk of electrical shock.

164MM

73MM

38MM

Pin1:Data+Pin2:Data-Pin7:GNDPin8:GND

12345678

DMX OUTPUTFemale

DMX OUPUTMale

DMX OUTPUTRJ45

3

54

GND

GND

V+

V+

1/R-

2/G-

3/B-

4/W1-

5/W2-

+

Back Enter Up Down

D+

D-

D+

D-

GND

12

3

54

12

12345678

Pin1:GNDPin2:D-Pin3:D+

Pin1:GNDPin2:D-Pin3:D+

DMX MasterConsole

W

Power Supply12-36VDC

L

N110V-230VAC

Pin1:Data+Pin2:Data-Pin7:GNDPin8:GND

12345678

DMX OUTPUTFemale

DMX OUPUTMale

DMX OUTPUTRJ45

3

54

GND

GND

V+

V+

1/R-

2/G-

3/B-

4/W1-

5/W2-

+

Back Enter Up Down

D+

D-

D+

D-

GND

12

3

54

12

12345678

Pin1:GNDPin2:D-Pin3:D+

Pin1:GNDPin2:D-Pin3:D+

RGB/W or CDW LED strip

W

Power Supply12-36VDC

L

N110V-230VAC

RGB/W or CDW LED strip