revolutionary new development in waterstop technology · bpa waterproofing systems b this agrément...

3
Revolutionary NEW development in waterstop technology Improving choice, quality and service CEMflex VB is a waterstop consisting of a galvanised steel plate covered in a coating which reacts with alkalis to provide a watertight joint for use in all non-movement construction joints in concrete Approvals: n BBA Certificated n Drinking Water Approval Reg 31 (4) (b) n Animal Manure Resistance CERTIFICATE 15/5194

Upload: others

Post on 13-Jun-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Revolutionary NEW development in waterstop technology · BPA WATERPROOFING SYSTEMS B This Agrément Certificate Product Sheet (1) relates to CEMflex VB, for use as part of a Type

Revolutionary NEW development in waterstop technology

Improving choice, quality and service

CEMflex VB is a waterstop consisting of a galvanised steel plate covered in a coating which reacts with alkalis to provide a watertight joint for use in all non-movement construction joints in concrete

Approvals:

nBBA CertificatednDrinking Water Approval

Reg 31 (4) (b)nAnimal Manure Resistance

CERTIFICATE 15/5194

Page 2: Revolutionary NEW development in waterstop technology · BPA WATERPROOFING SYSTEMS B This Agrément Certificate Product Sheet (1) relates to CEMflex VB, for use as part of a Type

Steel plate waterstop

CEMflex VB is an active waterstop that enables concrete to self-heal.

When fresh concrete is placed around the waterstop, the alkalinity of the concrete activates the coating

producing a chemical reaction. This causes the coating to soften

and penetrate any cracks in the concrete. It then crystallises

and seals the concrete.

Once installed the coating has infinite sealing ability, should

alkaline water come into contact with the coating at any time, it

will reactivate and repeat the sealing process.

n Place directly into fresh concrete

n Fix with clips prior to pouring concrete

CEMflex VB makes an extremely good connection to the surrounding concrete. Minimum of 30mm of concrete cover needed either side of the joint

Water is stopped in the cold joint. Any water coming in contact with CEMflex VB will activate the crystallisation process

Prior to pourn Install by fixing to the reinforcement using the CEMflex

Omega Holder

n The overlapping of the lengths should be a minimum of 150mm and held at the joint by the Omega Holder

n Ensure at least 30mm of plate is covered by each pour

Post pourn Install by pushing the plate into freshly poured concrete to an

embedment depth of at least 30mm

n Lap the plates with a minimum of 150mm & fix with a CEMflex Clip

How does it work?

Installation instructions

Dimensions and packing

Standard size: 150mm high and 1.25mm thick, supplied in 2m lengthsAlso available: 100mm high and 1.25mm thick, supplied in 2m lengths

CEMflex VB: n Is packed in wooden crates, 50 lengths (100m) per crate n Each length comes with one CEMflex Joint clip

CEMflex Omega Holder

CEMflex Clip

Either

Or

Airdrie 01698 907 101 Birmingham 0121 2893 293 w www.miersconstructionproducts.co.uk

St Neots 01480 702222 Warrington 01925 202 128

e [email protected]

call Miers on Airdrie 01698 907 101 Birmingham 0121 2893 293 w www.miersconstructionproducts.co.uk

St Neots 01480 702222 Warrington 01925 202 128

e [email protected]

call Miers on

nA highly effective waterstop, suitable for use in all non-movement joints in in-situ reinforced concrete

nWatertight joints independently tested at 5 bar pressure

n The coating crystallises and seals any cracks in the concrete

nMay be installed in all weather conditions

nWill remain effective as a waterstop for the life of the structure

nMay be installed before the concrete is poured or placed into fresh concrete

nRequires only 30mm of concrete cover either side of the joint to function correctly

n Suitable for vertical and horizontal applications

nProduct is supplied ready to use

nOffers strength and agility

n Simple and quick to fit (no special tools or skills)

Benefits

CEMflex - why it works best

The crystallisation process creates a waterproof joint, reacting within the joint for the life of the structure

How is it used?

Page 3: Revolutionary NEW development in waterstop technology · BPA WATERPROOFING SYSTEMS B This Agrément Certificate Product Sheet (1) relates to CEMflex VB, for use as part of a Type

Miers Branches Throughout the UK

Nationwide supply of building accessories...

CEMflex VB Waterstop BBA Certificated

Head Office Hawkesden Road, St Neots, Cambs PE19 1QS

t 01480 702222f 01480 702223

e [email protected] www.miersconstructionproducts.co.uk

BranchesSt Neots t 01480 702222 f 01480 702223Airdrie t 01698 907 101 f 01698 907 102Warrington t 01925 202 128 f 01925 202 129Birmingham t 0121 2893 293 f 0121 2893 294

Glasgow

Manchester

Edinburgh

Airdrie

Warrington

Birmingham

Liverpool

Birmingham

St Neots

London

nGeoplast Formwork

n Concrete Frame Supplies

nVisqueen Gas Membrane & Waterproof Tanking

nBrickwork Accessories

n Concrete & Brickwork Accessories

n Sprayers

Page 1 of 5

TECHNICAL APPROVALS FOR CONSTRUCTION

APPROVALINSPECTIONTESTINGCERTIFICATION

BPA GmbHBehringstraße 12D-71083Herrenberg-GültsteinGermanyTel: + 49 7032 89399 0 Fax: + 49 7032 89399 29e-mail: [email protected]: www.dichte-bauwerke.de

British Board of Agrément

tel: 01923 665300Bucknalls Lane

fax: 01923 665301Watford

[email protected] WD25 9BA

www.bbacerts.co.uk©2015

The BBA is a UKAS accredited certification body — Number 113. The schedule of the current scope of accreditation for product certification is available in pdf format via the UKAS link on the BBA website at www.bbacerts.co.uk

Readers are advised to check the validity and latest issue number of this Agrément Certificate by either referring to the BBA website or contacting the BBA direct.

BPA WATERPROOFING SYSTEMSCEMflex VBThis Agrément Certificate Product Sheet(1) relates to CEMflex VB, for use as part of a Type B (structurally integral) protection, as defined in BS 8102 : 2009, to waterproof construction joints in underground waterproof reinforced concrete structures.

(1) Hereinafter referred to as ‘Certificate’.

CERTIFICATION INCLUDES:• factors relating to compliance with Building Regulations where applicable• factors relating to additional non-regulatory information where applicable• independently verified technical specification• assessment criteria and technical investigations• design considerations• installation guidance• regular surveillance of production• formal three-yearly review.KEY FACTORS ASSESSEDResistance to water pressure — the product provides an effective barrier to the passage of moisture from the ground (see section 6).Durability — when fully enclosed in a concrete structure the product will remain effective as a waterstop for the life of the structure in which it is incorporated (see section 8).

Agrément Certificate15/5194

Product Sheet 1

The BBA has awarded this Certificate to the company named above for the product described herein. This product has been assessed by the BBA as being fit for its intended use provided it is installed, used and maintained as set out in this Certificate.On behalf of the British Board of Agrément

Date of First issue: 25 February 2015 John Albon — Head of Approvals Claire Curtis-Thomas

Construction Products Chief Executive

...also please see our brochures on: