revision - sew eurodrive · 1 revision 3 revision – movimot® mm..d 1 revision this revision...

*29133068_0719*Drive Technology \ Drive Automation \ System Integration \ Services

Revision

Decentralized Drive SystemsMOVIMOT® MM..D

Edition 07/2019 29133068/EN

SEW-EURODRIVE—Driving the world

1Revision

Revision – MOVIMOT® MM..D 3

1 RevisionThis revision applies to the following documentations:

"MOVIMOT® MM..D" operating instructions, part number 21214190/EN, edition10/2014

Replacements • Chapter 3.5.1 "Nameplate" is replaced by "Nameplate" (→ 2 4).• Chapter 5.7.11 "Connection of forced cooling fan V" is replaced by "Connection of

forced cooling fan V" (→ 2 5).• Chapter 6.5.3 "DIP switch S1/6" > "Motor with 50/60 Hz voltage range" is replaced

by "Motor with 50/60 Hz voltage range" (→ 2 8).• Chapter 11.13 "Assignment of the drive ID module" is replaced by "Assignment of

the drive ID module" (→ 2 12).• Chapter 12.1.2 "Short circuit current rating" is replaced by "Short circuit current rat-

ing" (→ 2 13).• Chapter 13 "Declaration of conformity" replaced by"Declaration of conform-

ity" (→ 2 15).Supplements • Chapter 4.6 "Mechanical installation" > "Installation of the MOVIMOT® inverter

close to the motor", is supplemented by subchapter "Mounting posi-tion" (→ 2 4).

• Chapter 9 "Operation" is supplemented by subchapter "Operatingnotes" (→ 2 11).

• Chapter 10.3 "Inspection/maintenance" is supplemented by subchapter "Re-pairs" (→ 2 12).

"MOVIMOT® MM..D" compact operating instructions, part number 21326592/EN,edition 10/2014

Replacements • Chapter 3.3.1 "Nameplate" is replaced by "Nameplate" (→ 2 4).• Chapter 6.3.3 "DIP switch S1/6" > "Motor with 50/60 Hz voltage range" is replaced

by "Motor with 50/60 Hz voltage range" (→ 2 8).• Chapter 9 "Declaration of conformity" replaced by"Declaration of conform-

ity" (→ 2 15).Supplements • Chapter 4.5 "Installation of the MOVIMOT® inverter close to the motor", is supple-

mented by subchapter "Mounting position" (→ 2 4).

2913

3068

/EN

– 0

7/20

19

1 RevisionNameplate

Revision – MOVIMOT® MM..D4

1.1 Nameplate

Order-specificnameplate

The following figure provides an example of an order-specific nameplate of theMOVIMOT® inverter for mounting close to the motor:

P-Motor = 1,5kW95.7416041003.0001.17S0#:

/APG4 IP65 ML 0001MM15D-503-00/0/P21A/RO1AType:

U= 3x380...500V I= 3,5A ACInput:

Made in GermanyFeldverteiler

Field Distributor

01UL®

LISTEDIND.CONT.EQ.

2D06

C US

General name-plate

The following figure provides an example of a general nameplate of the MOVIMOT®

inverter for mounting close to the motor:

Input:

Input:

Output to next Field Distributor:

Output to drive:

3x200...500VU=–Imax= Imax=

3x200...500V

50...60Hz

U=

f=1,3...3,5A ACImax=

–U=–

3x0...Uinput

0,25...1,5kW

U=

P-Motor=1,6...4,0A ACImax=

1.2 Mounting positionInstall the MOVIMOT® inverter MM40D (4 kW) in mounting position M2 (heat sink onbottom, see right figure) close to the motor only if ambient temperatures are ϑa ≤35 °C.

MM40D

ϑu ≤ 35 °C

20870741899

2913

3068

/EN

– 0

7/20

19

1RevisionConnection of forced cooling fan V


1.3 Connection of forced cooling fan V

The AC motors in the DR.. series are also available with the forced cooling fan V. Us-ing the forced cooling fan V extends the setting range of the setpoint speed. Thismeans that speeds from 150 min-1 (5 Hz) can be realized continuously.

INFORMATION• For motors with V forced cooling fans, the P341 type of cooling parameter must

be set to "forced air cooling".• When using MOVIMOT® drives with functional safety (STO), do not connect the

forced cooling fan to the connection box. Instead, use an external DC 24 V supplyto supply the forced cooling fan with power.

The following figure shows the cable routing of the forced cooling fan cable forMOVIMOT® drives (without functional safety):

18014401679145483

The following figure shows an example connection for the V forced cooling fan (onlyfor MOVIMOT® drives without functional safety):

MOVIMOT®

DC 24 V

X1

: 1

3

X1

: 1

4

X1

: 1

5

24

V X

6: 1

,2,3

X6

: 4

,5,6

RX

6: 1

1,1

2

LX

6: 9

,10

X6

: 7

,8

X5

: 2

5,2

6

X5

: 2

7,2

8

X5

: 2

9,3

0

X5

: 3

1,3

2

f1/f2

K1

a

K1

b

RS

-

RS

+

X1

: L

1

X1

: L

2

X1

: L

3

24 V

RD

BU

9007202436852107

2913

3068

/EN

– 0

7/20

19

1 RevisionMotor with operating point 400 V/50 Hz


1.4 Motor with operating point 400 V/50 HzApplies to MOVIMOT® with the following drive ID modules:

Drive ID module MotorIdentification Identification

colorPart number Line voltage

VLine frequency

HzDR2S/400/50 Light gray/white

striped28249720 230/400 50

DRS/400/50 White 18214371 230/400 50DRE/400/50 Orange 18214398 230/400 50

DRP/230/400 Brown 18217907 230/400 50DRN/400/50 Light blue 28222040 230/400 50

Setting of DIP switch S1/6:Power rating Motor type MOVIMOT® inverter MM..D-503-00

Motor in W connection Motor in m connectionkW S1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON

0.25DR2S63M4/..DR63L4/..DRE80S4/..DRN71MS4

– MM03D.. MM03D.. MM05D..

0.37DR2S71MS4/..DRS71S4/..DRE80S4/..DRN71M4

MM03D.. MM05D.. MM05D.. MM07D..

0.55DR2S71M4/..DRS71M4/..DRE80M4/..DRN80MK4

MM05D.. MM07D.. MM07D.. MM11D..

0.75

DR2S80MK4/..DRS80S4/..DRE80M4/..DRP90M4/..DRN80M4/..

MM07D.. MM11D.. MM11D.. MM15D..

1.1

DR2S80M4/..DRS80M4/..DRE90M4/..DRP90L4/..DRN90S4/..

MM11D.. MM15D.. MM15D.. MM22D..

1.5DRS90M4/..DRE90L4/..DRP100M4/..DRN90L4/..

MM15D.. MM22D.. MM22D.. MM30D..

2.2DRS90L4/..DRE100M4/..DRP100L4/..DRN100LS4/..

MM22D.. MM30D.. MM30D.. MM40D..

3.0DRS100M4/..DRE100LC4/..DRP112M4/..DRN100L4/..

MM30D.. MM40D.. MM40D.. –

4.0DRS100LC4/..DRE132S4/..DRN112M4/..

MM40D.. – – –

2913

3068

/EN

– 0

7/20

19

1RevisionMotor with operating point 460 V/60 Hz


1.5 Motor with operating point 460 V/60 HzApplies to MOVIMOT® with the following drive ID modules:



VLine frequency

HzDR2S/460/60 Yellow/white

striped28249739 266/460 60

DRS/460/60 Yellow 18214401 266/460 60DRE/460/60 Green 18214428 266/460 60

DRP/266/460 Beige 18217915 266/460 60DRN/460/60 Blue/white striped 28241819 266/460 60


Motor in W connection Motor in m connectionkW S1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON

0.25 DR2S63M4/..DRN71MS4/.. – MM03D.. MM03D.. MM05D..

0.37DR2S71MS4/..DRS71S4/..DRN71M4/..

MM03D.. MM05D.. MM05D.. MM07D..

0.55DR2S71M4/..DRS71M4/..DRN80MK4/..

MM05D.. MM07D.. MM07D.. MM11D..

0.75

DR2S80MK4/..DRS80S4/..DRE80M4/..DRP90M4/..DRN80M4/..

MM07D.. MM11D.. MM11D.. MM15D..

1.1

DR2S80M4/..DRS80M4/..DRE90M4/..DRP90L4/..DRN90S4/..

MM11D.. MM15D.. MM15D.. MM22D..

1.5DRS90M4/..DRE90L4/..DRP90L4/..DRN90L4/..

MM15D.. MM22D.. MM22D.. MM30D..

2.2DRS90L4/..DRE100L4/..DRP112M4/..DRN100L4/..

MM22D.. MM30D.. MM30D.. MM40D..

3.7DRS100M4/..DRE100LC4/..DRP132S4/..DRN100L4/..

MM30D.. MM40D.. – –

4.0DRS100LC4/..DRE132S4/..DRN112M4/..

MM40D.. – – –

2913

3068

/EN

– 0

7/20

19

1 RevisionMotor with 50/60 Hz voltage range


1.6 Motor with 50/60 Hz voltage range

Applies to MOVIMOT® with the following drive ID modules:


colorPart number Line voltage V Line fre-

quency Hz

DRS/DRE/50/60 Violet 18214444

220 – 240/50

380 – 415

254 – 277/60

440 – 480

DRS/DRN/50/60 Pastel green 28241827

220 – 230/50

380 – 400

266/460 60

DRN/50/60 Purple/whitestriped 28249747

220 – 230/50

380 – 400

266/460 60

Setting of DIP switch S1/6:

Powerrating

Motor type MOVIMOT® MM..D-503-00 inverter

kW Motor in W connection Motor in m connectionS1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON

0.25DR63L4/..DRN71MS4/..

– MM03D.. MM03D.. MM05D..

0.37DRS71S4/..DRN71M4/..

MM03D.. MM05D.. MM05D.. MM07D..

0.55DRS71M4/..DRN80MK4/..

MM05D.. MM07D.. MM07D.. MM11D..

0.75DRE80M4/..DRN80M4/..

MM07D.. MM11D.. MM11D.. MM15D..

1.1DRE90M4/..DRN90S4/..

MM11D.. MM15D.. MM15D.. MM22D..

1.5DRE90L4/..DRN90L4/..

MM15D.. MM22D.. MM22D.. MM30D..

2.2DRE100L4/..DRN100LM4/..

MM22D.. MM30D.. MM30D.. MM40D..

3.0DRE100LC4/..DRN100L4/..

MM30D.. MM40D.. MM40D.. –

2913

3068

/EN

– 0

7/20

19

1RevisionMotor with operating point 380 V/60 Hz (ABNT regulation for Brazil)


Powerrating

Motor type MOVIMOT® MM..D-503-00 inverter

kW Motor in W connection Motor in m connectionS1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON

4.0DRE132S4/..DRN112M4/..

MM40D.. – – –

1.7 Motor with operating point 380 V/60 Hz (ABNT regulation for Brazil)Applies to MOVIMOT® with the following drive ID modules:



VLine frequency

HzDRS/DRE/380/60 Red 18234933 220/380 60

DRN/380/60 Red/white striped 28240227 220/380 60


Motor in W connection Motor in m connectionkW S1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON0.25 DRN71MS4/.. – MM03D.. MM03D.. MM05D..

0.37 DRS71S4/..DRN71M4/.. MM03D.. MM05D.. MM05D.. MM07D..

0.55 DRS71M4/..DRN80MK4/.. MM05D.. MM07D.. MM07D.. MM11D..

0.75 DRE80S4/..DRN80M4/.. MM07D.. MM11D.. MM11D.. MM15D..

1.1 DRE80M4/..DRN90S4/.. MM11D.. MM15D.. MM15D.. MM22D..

1.5 DRE90M4/..DRN90L4/.. MM15D.. MM22D.. MM22D.. MM30D..

2.2 DRE90L4/..DRN100LM4/.. MM22D.. MM30D.. MM30D.. MM40D..

3.0 DRE100M4/..DRN100L4/.. MM30D.. MM40D.. MM40D.. –

4.0 DRE100L4/..DRN100L4/.. MM40D.. – – –

1.8 Motor with operating point 400 V/50 Hz and LSPM technologyApplies to MOVIMOT® with the following drive ID modules:


colorPart number Line voltage [V] Line frequency

[Hz]DRE...J/400/50 Orange 28203816 230/400 50DRU...J/400/50 Gray 28203194 230/400 50


Motor in W connection Motor in m connection[kW] S1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON0.25 DRU71SJ/.. – MM03D.. MM03D.. MM05D..

0.37 DRE71SJ4/..DRU71MJ4/.. MM03D.. MM05D.. MM05D.. MM07D..

2913

3068

/EN

– 0

7/20

19

1 RevisionDIP switch S2/1


Power rating Motor type MOVIMOT® inverter MM..D-503-00Motor in W connection Motor in m connection

[kW] S1/6 = OFF S1/6 = ON S1/6 = OFF S1/6 = ON

0.55 DRE71MJ4/..DRU80SJ4/.. MM05D.. MM07D.. MM07D.. MM11D..

0.75 DRE71MJ4/..DRU80MJ4/.. MM07D.. MM11D.. MM11D.. MM15D..

1.1 DRE80SJ4/..DRU90MJ4/.. MM11D.. MM15D.. MM15D.. MM22D..

1.5 DRE80MJ4/..DRU90LJ4/.. MM15D.. MM22D.. MM22D.. MM30D..

2.2 DRE90MJ4/..DRU100MJ4/.. MM22D.. MM30D.. MM30D.. MM40D..

3.0 DRE90LJ4/..DRU100LJ4/.. MM30D.. MM40D.. MM40D.. –

4.0 DRE100MJ4/.. MM40D.. – – –

1.9 DIP switch S2/1Brake type• When using the standard brake, the DIP switch S2/1 must be set to "OFF".• When using the optional brake, the DIP switch S2/1 must be set to "ON".

Motor Standard brake [type]

Optional brake [type]

400 V/50 Hz460 V/60 Hz

50/60 Hz voltage range

380 V/60 HzABNTBrazil

400 V/50 HzLSPM

Technology

S2/1 = OFF S2/1 = ON

DR63L4 BR03 –DR2S63M4 BE03 BE03

DRN71MS4 DRN71MS4 BE03 BE05DRS71S4DRE80S4

DR2S71MS4DRN71M4DRN71MK4

DRS71S4DRN71M4

DRE71SJ4DRU71SJ4DRU71MJ4

BE05 BE1

DRS71M4DRS80S4DRE80M4

DR2S71M4DR2S80MK4DRN80MK4DRN80M4

DRS71M4DRE80S4DRN80MK4DRN80M4

DRE71MJ4DRU80SJ4

BE1 BE05

DRP90M4 DRU80MJ4 BE1 BE2DRS80M4DRE90M4DRP90L4

DR2S80M4DRN90S4

DRE80M4DRN90S4

DRE80SJ4DRU90MJ4

BE2 BE1

DRS90M4DRE90L4

DRN90L4 DRE90M4DRN90L4

DRE80MJ4 BE2 BE1

DRP100M4 DRU90LJ4 BE2 BE5DRS90L4DRE100M4DRE100L4DRP100L4

DRN100LS4 DRE90L4 DRE90MJ4DRE90LJ4DRU100MJ4

BE5 BE2

DRS100M4DRS100L4DRS100LC4DRE100LC4

DRN100L4DRN100LM4

DRE100M4DRE100L4DRN100L4DRN100LM4

DRE100MJ4DRU100LJ4

BE5 BE2

DRP112M4DRE132S4DRP112S4

DRN112M4 BE5 BE11

Preferred brake voltageMOVIMOT® type (inverter) Preferred

brake voltageMOVIMOT® MM..D-503, size 1 (MM03.. – MM15..) 230 V

2913

3068

/EN

– 0

7/20

19

1RevisionOperating notes


MOVIMOT® type (inverter) Preferredbrake voltage

MOVIMOT® MM..D-503, size 2 (MM22.. – MM40..)120 V

MOVIMOT® MM..D-233, sizes 1 and 2 (MM03.. – MM22..)

1.10 Operating notes

WARNINGElectric shock caused by dangerous voltages at the connections, cables and motorterminals.When the device is switched on, dangerous voltages are present at the connectionsas well as at any connected cables and motor terminals. This also applies evenwhen the device is inhibited and the motor is at standstill.Severe or fatal injuries.• Do not switch under load.• Before performing any work on the device, disconnect it from the voltage supply.

Note that dangerous voltages can occur at the terminals and connections for upto 1 minute after the controller is switched off.

• Block the output stage of the inverter before switching at the output of the device.

WARNINGElectric shock from capacitors that have not been fully discharged.Severe or fatal injuries.• Disconnect the inverter from the power. Observe the minimum switch-off time

after disconnection from the supply system:– 1 minute

WARNINGRisk of crushing if the motor starts up unintentionally.Severe or fatal injuries• Observe the startup instructions.• Deactivate all control signals.

WARNINGDanger of burns due to hot surfaces of the device (e.g. the heat sink).Serious injuries.• Do not touch the device until it has cooled down sufficiently.

INFORMATION• The maximum output frequency in any operating mode is 120 Hz.• If the maximum output frequency is exceeded, the status LED of the MOVIMOT®

inverter flashes slowly red (error 08 "speed monitoring").

2913

3068

/EN

– 0

7/20

19

1 RevisionRepairs


1.11 RepairsOnly SEW-EURODRIVE is authorized to carry out repairs.

1.12 Assignment of the drive ID module

Motor Drive ID moduleType Line voltage Line fre-

quencyIdentification Identifica-

tion colorPart number

V HzDR2S.. 230/400 50 DR2S/400/50 Light gray/

white striped

28249720

DR2S.. 266/460 60 DR2S/460/601) Yellow/white striped

28249739

DRS.. 230/400 50 DRS/400/50 White 18214371

DRE.. 230/400 50 DRE/400/50 Orange 18214398

DRS.. 266/460 60 DRS/460/601) Yellow 18214401

DRE.. 266/460 60 DRE/460/601) Green 18214428

DRS../DRE.. 220/380 60 DRS/DRE/380/601) Red 18234933

DRS../DRE.. 220 – 240/380 – 415254 – 277/440 – 480

5060

DRS/DRE/50/60 Violet 18214444

DRE...J.. 230/400 50 DRE...J/400/50 Orange 28203816

DRU...J.. 230/400 50 DRU...J/400/50 Gray 28203194

DRN.. 220/380 60 DRN/380/601) Red/whitestriped

28240227

DRN.. 230/400 50 DRN/400/50 Light blue 28222040

DRN.. 266/460 60 DRN/460/601) Blue/whitestriped

28241819

DRS../DRN.. 220 – 230/380 – 400266/460

5060

DRS/DRN/50/60 Green/white

striped

28241827

DRN.. 220 – 230/380 – 400266/460

5060

DRN/50/60 Purple/white striped

28249747

1) This drive ID module can also be combined with MOVIMOT® MM..D-233.

2913

3068

/EN

– 0

7/20

19

1RevisionAppendix


1.13 Appendix

INFORMATIONDue to UL requirements, the following chapters are always printed in English inde-pendent of the language of the publication:

1.13.1 UL-compliant installation

Field wiring power terminalsObserve the following notes for UL-compliant installation:• Use 60/75 °C copper wire only• Tighten terminals to 1.5 Nm (13.3 in-lb.)

Short circuit current ratingSuitable for use on a circuit capable of delivering not more than 200,000 rms symmet-rical amperes when protected as follows:

For 240V systems:250V minimum, 25A maximum non-semiconductor fuses or250V minimum, 25A maximum inverse time circuit breakers

For 500V systems:500V minimum, 25A maximum, non-semiconductor fuses or500V minimum, 25A maximum, inverse time circuit breakersThe max. voltage is limited to 500 V.

Group installation

All models rated 5 kA for group installation when protected as follows:

For 240V systems:240V minimum, 25A maximum non-semiconductor fuses or240V minimum, 25A maximum inverse time circuit breaker.

For 500V systems:500V minimum, 25A maximum, non-semiconductor fuses or500V minimum, 25A maximum, inverse time circuit breakers.

All models rated 18 kA for group installation when protected as follows:

For 240V systems:240V minimum, 25A maximum non-semiconductor fuses

For 500 V systems:500V minimum, 25A maximum, non-semiconductor fuses

2913

3068

/EN

– 0

7/20

19

1 RevisionAppendix


Branch circuit protectionIntegral solid state short circuit protection does not provide branch circuit protection.Branch circuit protection must be provided in accordance with the National ElectricalCode and any additional local codes.For maximum branch circuit protection see table below.

Series non-semiconductor fuses inverse time circuit breakerMOVIMOT® MM..D 250 V/500 V minimum, 25 A

maximum250 V/500 V minimum, 25 A

maximum

Motor overload protectionMOVIMOT® MM..D is provided with load and speed-sensitive overload protection andthermal memory retention upon shutdown or power loss.The trip current is adjusted to 140 % of the rated motor current.

Ambient temperatureMOVIMOT® MM..D is suitable for an ambient temperature of 40 °C, max. 60 °C withderated output current. To determine the output current rating at higher than 40 °C,the output current should be derated 3.0 % per °C between 40 °C and 60 °C.• Only use certified units with a limited output voltage (Vmax = DC 30 V) and limited

output current (I ≤ 8 A) as an external DC 24 V voltage source.• The UL certification only applies for the operation on voltage supply systems with

voltages to ground of max. 300 V. The UL-certification does not apply to operationon voltage supply systems with a non-grounded star point (IT systems).

2913

3068

/EN

– 0

7/20

19

1RevisionDeclaration of conformity


1.14 Declaration of conformity

EU Declaration of ConformityTranslation of the original text 900030410/EN

SEW-EURODRIVE GmbH & Co. KGErnst-Blickle-Straße 42, D-76646 Bruchsaldeclares under sole responsibility that the following products

Bruchsal

a) Authorized representative for issuing this declaration on behalf of the manufacturerb) Authorized representative for compiling the technical documents

Place Date

20.07.2017

Managing Director TechnologyJohann Soder

a) b)

Frequency inverters of the product family MOVIMOT® MM..D-..3-..MOVIMOT® .../MM../...

in accordance with

Machinery Directive 2006/42/EC(L 157, 09.06.2006, 24-86)

This includes the fulfillment of the protection targets for "electrical power supply" in accordance with annex I No. 1.5.1according to the Low Voltage Directive 73/23/EEC -- Note: 2014/35/EU is currently valid.

EMC Directive 2014/30/EU 4)(L 96, March 29, 2014, 79-106)

RoHS Directive 2011/65/EU(L 174, July 1, 2011, 88-110)

Applied harmonized standards: EN ISO 13849-1:2008/AC:2009EN 61800-5-2:2007EN 61800-5-1:2007EN 61800-3:2004/A1:2012EN 50581:2012

4) According to the EMC Directive, the listed products are not independently operable products. EMC assessment is only possibleafter these products have been integrated in an overall system. For the assessment, the product was installed in a typical plantconfiguration.

2913

3068

/EN

– 0

7/20

19

SEW-EURODRIVE—Driving the world

SEW-EURODRIVE GmbH & Co KGErnst-Blickle-Str. 4276646 BRUCHSALGERMANYTel. +49 7251 75-0Fax +49 7251 [email protected]

revision - sew eurodrive · 1 revision 3 revision – movimot® mm..d 1 revision this revision...

Documents