resume

2
ARUN B. NAIR 56 Lisbon Avenue, Buffalo, New York, 14214-1411. +1 (716) 435-0393 [email protected] EDUCATION Master of Science, Aerospace Engineering State University of New York at Buffalo, New York, USA GPA: 3.2/4.0 June, 2015 Bachelor of Technology, Production Engineering National Institute of Technology, Calicut, India October, 2012 WORK EXPERIENCE Teaching Assistant, University of Buffalo Fluid and Heat Transfer Lab, Manufacturing Processes August, 2013 - May 2014 Research Assistant Development of Ratio Pyrometry Techniques using a Digital SLR Camera August, 2014 May, 2015 AREAS OF EXPERTISE Fluid Mechanics, Heat Transfer, Thermodynamics, Combustion, Thermodynamics, Internal Combustion Engines, Compressors/Turbines, High-speed Flows PROJECTS / SEMINARS / TRAINING Development of Ratio Pyrometry Techniques using a Digital SLR Camera Sponsored by New York State Energy Research and Development Authority (NYSERDA) as a part of advance innovative energy solutions. Development of practical methods to measure temperature field of objects from the RAW image data obtained from a commercially available digital camera, enabling temperature measurement to be carried out on archived images and footages of hot bodies emitting visible light. Analysis, Design and Fabrication of a Miniature Turbojet Engine Designing and fabricating a small scale low-thrust turbojet from scratch using commonly available materials to gain working knowledge in gas turbines and develop innovative approaches as to its fabrication. Analysis of Vibration Characteristics of a Body using Magnetic Excitation Study the resonance and damping characteristics of a body by using electromagnetism to induce and control vibrations, to develop the performance and fatigue failure characteristics. Characteristics and Effect of Split Injection in Combustion Ignition Engines Seminar on the study of effect of split injection on the emission and performance characteristics of a CI engine, and analyzing the optimum value for the split ratio. Visited Indian Space Research Organization Inertial Systems Unit, Trivandrum 2 week visit at the Indian Space Research Organization (ISRO) Inertial Systems Unit (IISU). Designed a prototype assembly of accelerometers and gyros for a navigation system, and visited the Precision Instruments Laboratory (PIL) and Metrology and Inspection Laboratory of the facility.

Upload: arun-nair

Post on 18-Aug-2015

212 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Resume

ARUN B. NAIR 56 Lisbon Avenue,

Buffalo,

New York, 14214-1411.

+1 (716) 435-0393

[email protected]

EDUCATION

Master of Science, Aerospace Engineering

State University of New York at Buffalo, New York, USA

GPA: 3.2/4.0

June, 2015

Bachelor of Technology, Production Engineering

National Institute of Technology, Calicut, India

October, 2012

WORK EXPERIENCE

Teaching Assistant, University of Buffalo

Fluid and Heat Transfer Lab, Manufacturing Processes

August, 2013 - May 2014

Research Assistant

Development of Ratio Pyrometry Techniques using a Digital

SLR Camera

August, 2014 – May, 2015

AREAS OF EXPERTISE

Fluid Mechanics, Heat Transfer, Thermodynamics, Combustion, Thermodynamics, Internal

Combustion Engines, Compressors/Turbines, High-speed Flows

PROJECTS / SEMINARS / TRAINING

Development of Ratio Pyrometry Techniques using a Digital SLR Camera

Sponsored by New York State Energy Research and Development Authority (NYSERDA) as a part of

advance innovative energy solutions. Development of practical methods to measure temperature field

of objects from the RAW image data obtained from a commercially available digital camera, enabling

temperature measurement to be carried out on archived images and footages of hot bodies emitting

visible light.

Analysis, Design and Fabrication of a Miniature Turbojet Engine

Designing and fabricating a small scale low-thrust turbojet from scratch using commonly available

materials to gain working knowledge in gas turbines and develop innovative approaches as to its

fabrication.

Analysis of Vibration Characteristics of a Body using Magnetic Excitation

Study the resonance and damping characteristics of a body by using electromagnetism to induce and

control vibrations, to develop the performance and fatigue failure characteristics.

Characteristics and Effect of Split Injection in Combustion Ignition Engines

Seminar on the study of effect of split injection on the emission and performance characteristics of a

CI engine, and analyzing the optimum value for the split ratio.

Visited Indian Space Research Organization Inertial Systems Unit, Trivandrum

2 week visit at the Indian Space Research Organization (ISRO) Inertial Systems Unit (IISU). Designed

a prototype assembly of accelerometers and gyros for a navigation system, and visited the Precision

Instruments Laboratory (PIL) and Metrology and Inspection Laboratory of the facility.

Page 2: Resume

POSITIONS OF RESPONSIBILITY

Organizing Secretary, Social Engineering Forum

Aimed at implementing skills and knowledge of college students

for the betterment of the society.

Initiated electrification of Wayanad Ghats on a budget of Rs. 30

million, successfully electrified a rural school in Wayanad.

Raised Rs. 30,000 in a fundraiser for a widow.

July, 2010 - April, 2012

LAN Administrator, F Hostel

Responsible for installing, maintaining and troubleshooting the

local area network of 108 rooms.

July, 2011 - April, 2012

VOLUNTEER WORK

Manager, Workshop Committee, Ragam

Part of a team for organizing various workshops and supervision

of resource management for the national cultural fest.

Conducted the Jive and Tango workshops.

February, 2012

Senior Executive, Exhibition Committee, Tathva

Part of a team for organizing exhibition stalls and resource

management for the national techno-management fest.

Supervising and arranging for crowd control.

October, 2010

Junior Executive, Exhibition Committee, Tathva

Part of a team for setting up exhibition stalls and distribution of

resources to the required stalls for the national techno-

management fest.

Assisting and directing visitors.

October, 2009

TECHNICAL SKILLS

Hands-on skill and extensive knowledge regarding most of the hand and power tools, and various

automated machines.

Fast learner - skilled in the art of electrical wiring, plumbing, carpentry, metal working, and other

workshop trades.

Skilled in computer programming in Matlab, C++, Java, HTML

Knowledge of computer aided design softwares such as ANSYS, Catia, ProE, Creo,

Skilled in Microsoft Windows, and Microsoft Office applications like Word, Excel, Powerpoint, etc.

PERSONAL DETAILS

Date of birth: January 18, 1991.

Nationality: Indian.

Citizenship: Indian.

Languages: English, Hindi, Malayalam (Fluent)

Spanish, Russian (Beginner)