restarting the enatel supervisory module

1
Restarting the Enatel Supervisory Module Issue: 1 Rev.: 0 Date: 11/08/2011 Page 1 of 1 To Restart the SM32 Supervisory Module while the system is live First unlock the SM32 on the right. Pull the SM32 half way out. Unplug the Pink or Black RJ45 wire for 10 seconds and then plug it back. The alarms should be cleared now. And the new settings should be active. Push back the SM32, and lock it again.

Upload: adramat1085

Post on 10-Jul-2016

33 views

Category:

Documents


7 download

DESCRIPTION

Enatel Rectifier

TRANSCRIPT

Page 1: Restarting the Enatel Supervisory Module

Restarting the Enatel Supervisory ModuleIssue: 1Rev.: 0Date: 11/08/2011Page 1 of 1

To Restart the SM32 Supervisory Module while the system is live First unlock the SM32 on the right.

Pull the SM32 half way out. Unplug the Pink or Black RJ45 wire for 10 seconds and then plug it back.

The alarms should be cleared now. And the new settings should be active. Push back the SM32, and lock it again.