responsecard xr user data version 1.0 ®. press the menu button. responsecard xr
TRANSCRIPT
ResponseCard XR
User DataVersion 1.0
ResponseCard XR
User DataVersion 1.0
®
Press the MENU button.
ResponseCard XRResponseCard XR
Current Channel(Leave on
Channel 41)
Battery Status(Two AAA
batteries in back)
Press YES to scroll down
through Menu.
Press NO to scroll up.
Default Menu ScreenDefault Menu Screen
Navigating the MenuNavigating the Menu
Scroll down to highlight Setup.
(Press YES 4 times)
(If the screen goes blank,
press any key except the MENU key)
Setup MenuSetup Menu
Press Enter to select Setup
Mode.
Select User DataSelect User Data
Press Enter to select User
Data.
Edit User DataEdit User Data
Press 2 to Edit your User Data.
Enter First NameEnter First Name
Press 1 to Enter your First
Name.
Selecting LettersSelecting Letters
Use the Left and Right Arrows to
Select the First Letter of your First Name.
Selecting LettersSelecting Letters
For Example: Press the Left Arrow once to Highlight the
Letter “L”.
Entering the First LetterEntering the First Letter
Press SEL to Select the
letter.
Ready For More LettersReady For More Letters
Use the Left and Right arrows to
continue spelling your name.
Making CorrectionsMaking Corrections
Use the CLR button to
Backspace and make
corrections.
Do not press the MENU
button as your changes will not be saved.
Done Entering NameDone Entering Name
When you are done press the Enter button.
After pressing the Enter button, your screen will
display the following.
Cancel Send DataCancel Send Data
Press NO.
Enter Last NameEnter Last Name
Press 2 to Enter your Last Name.
Follow the same procedure as
your First Name.
Enter User IDEnter User ID
Press 3 to enter a User “UVU” ID.
Back to User DataBack to User Data
Press MENU to move back up
the list of menus - in this screen, you can
send the data you just
entered by pressing 3 -
otherwise press MENU again.
Select Other OptionsSelect Other Options
Use the arrow keys to select
the other options.
Contrast will allow you to change the screen contrast.
Battery will show the percentage of battery time left.
Version shows the ResponseCard’s software version
number.
Other Setup OptionsOther Setup Options
Once you have selected an
option, press the Enter button.
Setup is now complete.
Setup CompleteSetup Complete
Press MENU until you return to the top level
screen.