resizing egg cup fusion 360 tutorial - university of warwick · 2017. 9. 6. ·...
TRANSCRIPT
Page 1 [email protected]
Resizing Egg Cup
Fusion 360 Tutorial
Before using these instructions, it is helpful to watch this video screencast of the CAD drawing actually
being done in the software. Click this link for Video instructions
Following on
from the Egg
Cup tutorial
this worksheet
looks at
resizing the
circles, as well
as naming
your sketches
and bodies.
Naming Sketches and Bodies
1) Click on the triangle next to
the “Bodies” folder.
2) Left click once to select
“Body1”.
3) Then double left click on the
“Body1” text.
Overview
4) Rename by typing “Egg Cup”
on your keyboard then pressing
the enter button.
5) Now click the triangle next to
the “Sketches” folder to rename
your circles.
6) Rename by double clicking
on the text. Change:
“Sketch1” to “Circle 1”
“Sketch2” to “Circle 2”
“Sketch3” to “Circle 3”
“Sketch4” to “Circle 4”
Page 2 [email protected]
Resizing Egg Cup
7) Click on the
lightbulbs next to
your circle
sketches in the
browser menu.
8) All the light
bulbs should now
be yellow and you
should see the
circles in your egg
cup.
In order to fit a larger egg into our egg cup we need to make the diameter of circle 3 and circle 4 larger.
First lets start with Circle 3:
9) Right click on
“Circle 3” then select
“Edit Sketch”
10) Your screen should
now look like this.
11) To view Circle 3 on it’s own, click on the lightbulbs
next to “Circle 1” and “Circle 2” in the browser menu.
12) Now circle 3 is the only sketch on your
screen
Page 3 [email protected]
13) Double left click
on the “30” to change
the diameter
14) Type 40 into the
dimension box to
change the diameter
to 40mm. Then press
the enter.
15) Press the “STOP
SKETCH” button.
16) This is how your
egg cup should look
now.
Now we do the same for circle 4:
17) Right click “Circle
4” then select “Edit
Sketch”
18) Your screen
should now look like
this.
Note: If the dimension isn’t already there
hit “D” on your keyboard, then select the
edge of your circle and then hit enter.
Page 4 [email protected]
19) To view circle 4 on it’s own turn the lightbulb off next to
“Circle 3”. Now you should only see circle 4 on your screen.
20) double
click on the
“44”, then
type 54 and
press enter
to change
the
diameter of
the circle
from 44mm
to 54mm
21) Finally click on the “STOP SKETCH”
button at the top of the screen.
You have finished! Your egg cup should
look like this.