report - regent products corp.fly lab number: (8513)284-0788 tcclmician nruue: aaron test date: oct...

BUREAU VERITAS

Bureau Veritas Shenzhen Co., Ltd 4/F, Block 8, Minlida Industrial Building, 4th Zone or Honghualing Industrial Park, Xili Town, Nanst1an District~ St1enzhen. Guangdong, P.R.C. Tet:86-755-B6000151 fax: 86-755-86000159 \'1\V\V.bureauveritas.comfcps

REPORT Technical Report: (8513)284-0788

of 22 OCT 28, 2013

lhs raport rs governed by, and incorporates by rofcrcucc, the Conditions o f Testing as posted tH the dat.o of issuance of this report at http.//\'N/1.'1 cps bureauveri1as cotn and is intended for your exdusiva l JSa Any copyin g or replication o f this report to or for any oU1er person or entlly, or use of o~rr name or l!ademark, ls peumtt~d only with our prior \'mtten permission 'Tllis report sets forUl our findings solely V1iU1 respect to H1e lest samples 1denll fied t1erein The resldl s set forth In lh1S report are not Indicative or reprcsanlabve o f the q\J.7ility or charactr:ristir..s of tho lot from which a t~st sample was taken or any sim ilar or identi~! product uriess specifically and expressly noted Our report includes all of the tes ts mqu.c:sted by you and the resulls thereof based upon the lnfomwhon that ~·ou provided to liS . You ha';e 60 d.ays from date of issuance of this report to no!ify l iS of an}' material error or emission caused by our negligence: pcov1de<.t, IW:Jevcr, that sucil llOIICc shoJI bo 111 wriMg and ~h(1JI specifically addr(:ss Uw JSSliC you wtsh to ra1se. A fa1!ure to raise such issue wllhin the prescribed time shall consll tu!a you unqualified acceptance of Um co111pla!ene.ss of this repo1t the tes ts conducll'!d and U1e correctness of U1e report contents

BUREAU VERITI\S

MONDAY BEAUTY LTD 2810, 281F PAULY CENTRE, 51 HUNG TO ROAD, KWUN TONG, HONG KONG

ATTN: SUNNY YU I EAGLE I VINCENT I MARANDA I WILL

C.C.: EMAIL: [email protected]

eagle@mondaybeauty .com vincent@mondaybeauty .com [email protected] will@mondaybeauty .com

LAB LOCATION: SHENZHEN LAB NUMBER: (851 3)284-0788

CLIENT NO.: DEPARTMENT: DATE IN:

DATE OUT: MOD. LOG IN:

I I OCT 14, 2013

OCT 28, 201 3 I

REVISED DATE: I PAGE: 2 of 22

SUBMISSION PROCESS OVERALL RATING

Sample Collection:

0 Initial Sample Collection (DC's 1/5/6 Only) PASS

0 Second Sample Collection (DC's 2/314/617/8/9/101411/412) SATISFACTORY

0 Single Sample Collection (All DC' s - 50% of Entire Quantity Produced) CORRECTIVE ACTION REQUIRED

0 Random Sampling of Failure (All DC's - 90% of Entire Quantity Produced) FAIL

0 Random Sampling of Failure w/ Prop 65 (DC 4/9 & Non.DC 419 - 90% of Entire Quantity Produced) UNSATISFACTORY

0 Vendor Direct

(8513)284-0788 of 22

US CN

X X

RANDOM SAMPLING REQUIRED **VENDOR PLEASE NOTE RANDOM SAMPLING

IS REQUIRED ON ALL FAILED REPORTS**

BL

TESTING FOR NON-REGULATORY ANALYTICAL TESTING (V7)

PAPER PAPERBOARD FOOD CONTACT ARTICLE (V4) CPSD - 06001.02- US

PLASTIC FOOD CONTACT ARTICLE (V8)

CPSD - 06001.01 - US FOOD CONTACT ARTICLE (V5)

CPSD - 06001 - US FOOD CONTACT ARTICLE (V11)

BUREAU VERITAS

(8513)284-0788 of 22

Sample Description: I FAVOR BOXES 6PK HALLOWEEN

I Final Packaging: Yes (submitted for review) I I No (not submitted for review) I X I Submitter: MONDAY BEAUTY Vendor Number: I

LTD Country of Origin: CHINA Style: I Country of Sale: USA E3 Order: I DTD Country of Sale: I SKU Number(s): G89022 Color: I P.O. Number(s) (USA): I Department Number: I Additional PO No (USA): I Sub-Department No. I P.O. Number(s) (Canada): I Previous Report No.: I Additional PO No (Canada): I Revised Report: Yes: I I No: IX SKU: I Charge Vendor: Yes: I X I No: I PO No.: I Test Type: I Vendor Item Number: I Reason For Revision: I

TEST PROPERTY PASS SATISFACTORY CAR FAIL DATA COMMENTS

Labeling I

Physical Characteristics I

Construction Qualities I

Performance I

Colorfastness I

Flammability I

Analytical X

BL

BUREAU VERITAS

REMARK(S):

1. See enclosed protocol(s) for the test results.

2. As per request, the following test was not performed in this report • Heavy metals content in packaging materials(CONEG)

If there are questions regarding above report, please contact the appropriate lab personnel.

Technical questions, please contact: John Hong I Randy Huang (86)755-86000151 (Ext 6207 16225) [email protected] [email protected]

Administrative questions, please contact: Ann An I Shirley Liu (+86)755-86000151 (Ext 6210 16446) Ann [email protected] [email protected]

BUREAU VERITAS SHENZHEN CO., LTD

BRIAN TAM MANAGER- HARDLINES DIVISION

BL

(8513)284-0788 of 22

FlY Lab Number: (8513)284-0788

Tcclmician Nruue: AARON

Test Date: OCT 18-28,2013

Reviewed By/Date: ALICE I OCT 28, 2013

of22

NON-REGULATORY ANALYTICAL TESTING (V7)

E\'aluntion Cilntion I Method No. of CriCcritl ltcsults ltnting Snm 1les

SCOPE: 11tis protocol is a supplemental to individual product protocols. It contains non~regulatory analytical tests of US and CN. This protocol applies to all products ANALYTICAL

All access11Jie surface coatings in the as received state on items outside oftl10 scope of 16 CT'R 1303 shall not contain lead or lead components in which tile lead content is in excess of 0.060% (600ppm) of the weight of the total content M

AOAC 974.02 modified I Report actual results or include data table ";thin report. ALL COATINGS (>4COLORS) . Total lead content in surface coatings CPSD-AN-00001- -- !lOX PASS MTHD Component testing is al lowed

A-D Com positing up to 4 like materials is allowed ll1e composite result will be evaluated against the adjusted limit (regulatory 331'1'M (0.0033%)

limit divided by the number of composites).

Client requirement All accessible stufacc coatings in the as received state on the item outside of the scope of CCPSA shall not contain lead or lead components in which the lead content is in excess of 0.06% M (600ppm) of the weight ofthe total content.

CI'SD-AN-00009-ALL COATINGS (>4COLORS) . Total lead content in surface coatings - Report actual results or include data table within report. PASS MTIID !lOX

Component testing is allowed. A-D

Com positing up to 4 like materials is allowed. 331'l'M (0.0033%)

Client r~quircmcnt

lMI'OI\TANT NOTE: to the original standards.

1l1e infonnation presented under the "Criteria" of this protocol is for information only and does not replace the content of the standard. Details of the requirements should be referred

BL

.!>&Y: • ••

Result Key· c R M NM NA NT

Ratino Key: PASS FAIL MARG

CAR

BL

Additional Charge For ·n,is Test Mandatory Requirement By Request Only

Claimed Recorded Meets Does Not Meet Not Applicable Not Tested

Pass Fail Marginal Corrective Action Required

BY Lab N1m1ber:

Technician Name:

Test Date:

Reviewed By/Date:

Client Approval:

Creation Date: last Revis ion Date: Pricing Review Date: Technical Review Date:

(8513)284-0788

AARON

OCT 18·28, 2013

ALICE I OCT 28, 2013

of22

OCTOBER 16,2012

FEBRUARY II , 2011 OCTOBER 12, 2012

AV IA1b Number: (8513)284-0788

Technician Name: AARON

Test Date: OCT 18-28, 2013

Reviewed By/Date: ALICE I OCT 28,2013

of22

BUREAU YERITAS TEST PROTOCOL FOR

CPSD- 06001.02- US I'AI'Ef( I' Al'ElUlOARD FOOD CONTACT ARTICLE (Y4)

E\'n.luution Cilnllon/ Method No. of Criteria Results Rating Samples SCOPE: This protocol covers the food grade tests for nrticles, which are me~dc of coated oruncoatc~ paper an~ rapcrboard, intended to contact with food and beverage. SUI'PLEMENTAL PROTOCOLS

The sample should be reviewed against the requirements of California Proposition 65 to determine if additional testing or labeling is rec1uiretl.

# Califomia Proposition 65 CPSD-AN-PTCL- . for samples tlmt fall under I he scope of CAI'rop 65 NA I 06572-US requirements with testing limit(s) but docs not contain

appropriate labeling (refer to labeling section for detail), actual Jesting will be conducled. Othenvise., actual testing is not required ;;tnd report as "Pass" if the sample contains ap1>ropriate labeling.

ANALYTICAL Shall comply with FDA 2 1 CFR 176.170 requirements.

Note:

FDA 21 CI'R 176. 170/ - Applied on components of coated or uncoated food contact . raper and paperboard CI'SD-AN-00002- . surfhcc of paper and paperboard in contact with aqueous and M PASS

MTHD fi1tty fo<xls. SEE ATTACHED - No test for dry food. Dry food means no free fill or oil on the surface. - Testing applicability is depending on what food types that product will contact with.

Note I: Testing charge per material per color (No need to charge per stimulant).

Bl

#

~ c R M NM NA NT

Rating Key: PASS FAlL

BL

Addilionnl Charge For This Tcsl M;mdnltlry Requir<menl By Requcsl Only

Claimed Reeorded Mecls Docs Nol M eel Nol Applicnble Nol Tesled

Pnss Fail

BV Lab Number:

Technician Name:

Tcsl Dale:

Reviewed By/Dale:

Clicnl Approval: Creation Date: lasl Revision Dale: Pricing Review D<:tte: Technical Review Date:

(85 13)284-0788

AARON

OCT 18-28,2013

ALICE I OCT 28,2013

l'agc 8 of22

I FEBRUARY 12, 2010 MARCH 08, 2011 I\>IAY24,2010

E\'aluntion Citation I Method

SCOPE:

BUnEAU VI.:HITAS TEST PROTOCOL FOn

CPSD - 06001.0 I - US PLASTIC FOOD CONTACT ARTICLE (V8)

No. or Criteria Samples

llV lab Number:

Technician Name: Test Date;

Reviewed By/Date:

This protocol covers the food grude tests for articles, which arc made of plastic, intended to contact with food and beverage. SUPPLEME NTAL PROTOCOLS

The sample should be reviewed against the requirements of Califomia Proposition 65 to determine if additional testing or labeling is ""lui red.

# Cali fornia Proposition 65 CI'SD-AN-PTC!/ For samples that fall under the scope of CAProp 65 06572-US requirements with testing limit(s) but docs not cont;:tin

appropriate labeling {re fer to labeling section for dct;:t il), actual testing will be conducted. Otherwise, achaa1 testing is not required and report as "Pass" if the sample contains appropriate labeling.

ANALYTICAL Shall comply with FDA 21 CFR 175.300 re<[Uirements.

FDA 2 1 CFR 175.300 I Note: . Rcsinuous and polymeric coating CPSD-AN-00002- ~No test for dry food. Dry food means no free fat or oi l on tltc MTHO surfhcc.

- DPA-bascd epoxy resin coatings arc not allowed to usc in food contact packaging for infant formula. Shall comply with FDA 21 CFR 177.1010 requirements.

FDA 2 1 CFR 177. 1010 Note: . Acrylic and modified acrylic plastic I CPSD-AN-00002-

MTHD -No test for dry food. Dry food means no free fat or oil on the surfitce.

BL

(8513)284-0788

AARON

OCT 18-28,20 13

ALICE I OCT 28, 2013

of22

n esults ltatlng

NA I

NA I

NA I

BY Lab Number: (8513)284-0788




of22

CPSD- 06001.0 I -US PLASTIC FOOD CONTACT ARTICLE (V8)

1<:\·aluntion Citation I Method No. of Criteriu ncsults Ruting Samples

Closure-sealing gasket of closures shall comply with FDA 2 1Cf.R 177. 1210 requi rements.

FDA 21 CFR 177.1210 Note:

• Closures with scaling gaskets I CPSD-AN-00002- - -No test for dry food. Dry food means no free fat or oil on the NA I surfhce.

MTHD - G<1skcts arc only tested according to gasket requirements of I'D A 21 CFR 177. 1210. Vendorslmll be responsible for the c.:ompliancc of the material requirements, unJe.ss testing of material is requested. Shall comply with FDA 21 CFR 177. 1350 re<[Uirements.

FDA 21 Cf.R 177.1350 Note: • Ethylene vinyl acetate copolymers I CPSD-AN-00002- - Apply tests stated in 21CFR 177. 1350 section (b)(l) only. NA I

MTIID - No test for dry food. Dry food means no free fat or oil on the surface.

Shall comply with FDA 21 CFR 177. 1460 requirements.

Melamine-formaldehyde resins in molded FDA 2 1 CFR 177.1460 Note: • I Cl'SD-AN-00002- NA I articles

MTHD -No test for dry food. Dry food means no free f.,t or oil on the surfhce.

Shall comply with FDA 2 1CFR 177. 1500 requirements.

f.DA 2 1 CFR 177.1 500 Note:

• Nylon resins or polyamide I CPSD-AN-00002--Applicable to nylon rcsinsstatcd in FDA 2 1 CFR 177. 1500

NA I MTHD section (b) table, except Nylon 6/12 resins in point 13.1 and

13.2, Nylon 6/69 resins in point 14 and Nylon resin PA 6-3-T in point 16.

BL

F.valunllon Cllallon I ~lei hod

FDA 21 CFR 177.1520 . Olefin polymers I CPSD-AN-00002-MTIID

FDA21 CFR 177.1580 • Polycarbonute resins I CPSD-AN-00002-

MTIID

FDA 21 CFR 177.1630 • Polyethylene phthalate polymers I CPSD-AN-00002-

MTHD

Polysi)Tcne or mbbcr-modificd FDA 21 CfR 177.1640 . I CPSD-AN-00 134-

polystyrene MTHD

FDA21 CFR 177. 1810 . Styrene block polymer I CPSD-AN.00002-MTIID

BL

CPSD- 06001.01- US

BV Lab Number:

Technician Name;

Test Date:

Reviewed DyfOalc:

I' I ASTIC FOOD CONTACT ARTICLE (V8) . No. of Criteria

Samplts Shall comply wilh FDA 21 CFR 177.1520 "''luiremenls.

Note: - -Applicable to olefin polymers, including bul not limited 10

polwropylcne (1'1') homopol)'lller, polwropylcnc (PP) copolymer Hnd polyclhylcnc (Pll).

Shnll complywilh fDA 21CfR 177.1580 rcquircmcnls.

Note:

- - Apply lesls slated in 2 ICFR 177.1580 section (c)(2) only. · Polycarbonntc resins is not allowed to use in infant feeding bollles (baby bollles) and spill-proof cups including I heir closures und lids, desib'llcd to help I rain babies and toddlers lo drink trom cups (sippy.cups). Shall comply with FDA 2 1CFR 177.1630 requirements.

Note: - -Applicable to article with condition of usc staled in 2 1CFR 177. I 630 section (f), (g) and (i) only.

Shall comply with FDA 21CFR 177.1640 requirements.

Note: -Apply lesls slated in 21CfR 177.1640 section (c) only.

Shall comply with FDA 21CfR 177.1810 requirements.

- Note: · Apply solubility flnd nutx.imurn extractable fmclion tests only.

(HS13)284-0788

AARON

OCT 18-28, 2013

AI.ICP.I OCT 28,2013

Page I I of22

Uesull< Ruling

M PASS SEE ATTACHED

NA I

NA I

NA I

NA I

BV Lab Number: (8513)284-0788

Tcchniciom Name: AARON

Test Date: OCT 18-28,201 3

Reviewed By/Dale: ALICE I OCT 28,2013

of22

CPSO • 06001.01 ·US PLASTIC FOOD CONTACT ARTICLE (VB)

E\·nluu,iun C itation / Method No. of Crilerlu Resnlls Rating Samples

Shall comply with FDA 2 1 CFR 177.1830 requirements.

FDA21 CFR 177. 1830 Note: • St}Tene-methyl methacrylate copolymer I Cl'SD-AN-00002- - NA I

MTIID -No test for dry food. Dry food means no free fitl or oil on the surfitce.

Shall comply with FDA 21CFR 177.1830 requirements.

Urea-formaldchyctc resins in molded FDA21 CFR 177. 1900 Note: • I CPSD-AN-00002- - NA I articles MTHD - No test for dry food. Dry food means no free fat or oil on the surfitcc.

FIJA21 CFR 177. 1975 Shall comply with FDA 2 1CFR 177. 1975 (drafi) • Polyvinyl chloride (drnfi) I CPSD-AN- - requirements. NA I

00099-MHID Shall comply with FDA 2 1 CFR 177.2410 requirements.

FDA21 CFR 177.2410 • Phenolic resins in molded articles I CPSD-AN-00427- - Note: NA I

MTHD -Applicable to repeated usc articles in contact wi th non-acid food (pll above 5.0) only. Shall comply wi th FDA 2 1CFR 177.2420 requiremenls.

FDA 21 CFR 177.2420 Note:

• Crosslinked polyester resins I CPSD-AN-00002-- Applkable to repeated use art icles or components of articles

NA I intended to contact with food. MTHD -No test for dry food. Dry food means no free fill or oi l on the snrfhcc.

BL

BY Lab Number: (8513)284-0788

Technician Nctme: AARON


Reviewed By/Date: ALICE I OCT 28, 20 I 3

of22

CPSD- 0600 1.0 I - US PLASTIC FOOD CONTACT ARTICLE (V8)

E\·nlualion Citation I Method No. of Criteria Results Rating Samples

Shall comply with FDA 21 CFR 177.2470 requirements.

Note: -Applicable to both finishcrl prorluct and raw material.

FDA 21 CFR 177.2470 - Applicable to repeated use <1rticles or components of articles . Polyoxymcthylcnc copolymer I CPSD-AN-00002- - intended to conltlct w ith food, but usc tcmpcrnturc shall not NA I MTHD excccrl250 "F.

-No test for dry food. Dry food means no free fat or oil on the surface. - Apply tests s tated in 21CFR 177.2470 section (d) only.

Shall comply with FDA 2 1 CFR 177.2480 re<1uirements.

Note: · Appl icable to bolll finished product and raw material. -Applicable to repeHied use articles or components of articles intended to contact with food, but usc temperature shall not

FDA 2 1 CFR 177.2480 exceed 250 "F.

• Polyoxymethylenc homopolymer I CPSD-AN-00002- - - No test for dry food. Dry food means no free fi•t or oil on the NA I surfucc. MTIID

-Apply tests s lated in 2 ICFR 177.2480 section (e)(3-4) and (d) only. - For finished product, apply density, melting point and soluble extractive tests only. · For raw material, apply density, mclling point, fonnaldchydc release and soluble extractive tests only.

Shall comply with FDA 21CFR 177.2600 r«tnirements. FDA 2 1 CFR 177.2600

• Rubber intended for repeated usc I CI'SD-AN-00002- Note: NA I MTHD - Not applicable to mbbcr nursing·lmttlc nipples .

BL

J!:\•a luation Citation I Method

FDA21 CFR 18 1.32 1 . Acrylonitrile copolymer and resins

Note I: Testing charge per materhtl per l:olor.

~ • •• #

~ c R M N!v! NA NT

Rating Key: PASS rAIL

BL

Additional Charge For This Test Mandatory Requirement By Request Only

Claimed Recorded Meets Docs Not Meet Not Applicable Nul Tested

Pass fail

CPSD-AN-00 I 55-MTHD

DV Lab Number:

Technician Name:

Test Date:

Reviewed Dy/Dalc:

CI'SO- 06001.01 - US P LASTIC FOOD CONTACT ARTICLE (VS) No. of

Sam lies

-

Crilcrln

Shall comply with FDA 2 I CFR I 81.32 requirements.

Note: ~Test acrylonitrile copolymer and resins with Hcrylonitrile Jess than 30% only.

Client Approval: Creation Date: Utst Revision Date: Pricing Review Date: 'l'cchnical Review Date:

(8513)284-0788

AARON

OCT 18-28, 20 13

AJ.ICP. I OCT 28,2013

r .. ge 14 uf22

Results

NA

I FEBRUARY 12,2010 AUGUST 08,2013 MAY 24,201 0

Rating

I

BV L1b Number: (8513)284-0788


Test Dale: OCT 18-28, 2013

Reviewed By/Date: ALICE I OCT 28, 20 13

Pasc 15 of22

BUREAU VERITAS TEST PROTOCOL FOR

C I'SI>- 06001 - US FOOD CONTACf ARTICLE (VS)

E\·aluntion Citation / Method No. uf Crilerln Res ults Rating Samples

SCOPE: -This protocol covers the food grade tests for articles intended to contact with food and beverage. SUI'l' LEI\'IENTAL PROTOCOLS

• Plastic CI'SD-AN-I'TCL- - Shall meet the a)>plicable requircmellls in CI'SD-AN-I'TCLr M I' ASS 06001.01-US 0600 1.01-US as specified. SEE CPSD-06001.01-US . P•pcr and paperboard Cl'SD-AN-l'TCL- Shall meet the applicable requirements in CPSD-AN-PTCLr M

PASS 06001.02-US 06001.02-US as specified. SEE CPSD-06001.02-US . Ceramic, pon.:dain, glass and enamel CPSD-AN-PTCL- Shall meet the appl icable requirements in CPSD-AN-PTCL-NA I 06001.03-US 06001.03-US as specified.

• Wood CPSD-AN-l'TCLr Shall meet the applicable requirements in CPSD-AN-PTCL- NA I

# 0600 1.04-US - 06001.04-US as specified. . Metal and metal alloy CPSD-AN-PTCL-

06001.05-US - Shall meet the applicable n:quircmcnts in CPSD-AN-PTCLr

06001.05-US as specified. NA I

ANALYTICAL All other natural materials except wood (non-wood) inte nded

21 CFR 170-189 FDA to come into contact with food shall meet FDA GRAS Gcncmlly Recognized requirement All addit ives in that mal erial, such as glue shall

as Safe (GRAS) also mccl FDA GRAS requirement Client sh<lll provide the . GRAS in natural material (nun-wood) - Guidelines I FDA documenlution with mot erial bill or composition for materiul NA I document review Opinion I CPS D-AN- ic..lenti fica lion. It is acceptable for the client to submit either a G00007-STII'02/ FDA approval letter or. ifthere is information from FDA CI'SD-GH-{)0001- showing the material is acceptable, n gucmmtee letter

STI!'03 indicating the material is the only fooc..l grade material used in the manufacturing process can also be accepted.

Note I: CPSD-AN-I'TCL-0600 1.04-US will be offered to program client only.

BL

~ • •• #

Result Key; c R M NM NA NT

Rating Key; PASS FAIL

BL

Additional Cl"rge For This Test Mandatory Requirement By Request Only


Pass Fail

DV lab Number;

Technician N~tmc: Test Date;

Reviewed Hy/Date;

Client Approval; Creation Date: Last Revision Date; Pricing Review Date; Technical Review Date:

(8513)284-0788

AARON

OCT 18-28,2013

ALICE /OCT28, 2013

of22

I JANUARY 29, 2009 JANUARY 09,2013

IW Lab Nrunber: (8513)284-0788

Tc:chnician Nrune: AARON

Test Date: OCT 18-28,2013

Reviewed By/Dale: ALICE f OCT 28, 2013

of22

FOOD CONTACT ARTICLE (VI I)

l•:,•nluntion Citnlion / !\let hod No. of Critorin Re-sults Roling Som JICS SUI'PI-Elll ENTAL PROTOCOLS Note: Additional cost, sample size & TAT may be roquired if testing to I or more supplemental protocol is necessary. !'lease refer lo the above referenced supplcmerual protocol(s) for additional information.

Shall meet the applicable requirement in CSPD-AN-PTCL-

• Food contact CPSD-AN-PTCL- 06001-US as specified. M PASS OGOOI-US SEE CPSD-06001-US Note: Items to be sold in Crurada also require testing

ANALYTICAL Hazardous Products [CN]

• Leachable lead in kellles (Kettles) Regulations f . NA f CPSD-AN-00493· Shall not release more than 0.01 parts per million (w/w) of MTHD lead into boiled water.

[CN)

Food contact article, which is conlpletcly or partly made of ceramic, porcelain or slass Rnd completely or partly covered with coating, glaze or decoration, shall not contain cxtmctal>le lead (Pb) and cadmium (Cd) exceed the following limits:

Cadmium (Cd): Glazed Ceramics and 0.25 ppm (mg/L) (any one of'6 units for Large hollowware

• Extractable lead and cadmitun - interior Glassware Regulations 6 and Pitchers) NA I (SOR/98-176) f CPSD- 0.5 ppm (mg{L) (any one of 6 units for Small hollowware, AN-00011-MTHD Cups and Mugs)

0.5 ppm (mg/L) (any one of6 units for Flatware)

Lcad(Pb): 1.0 ppm (mg/L) (any one of6 w1its for Large hollowware) 2.0 ppm (m!VL) (anyone of6 units for SmaU hollowware) 0.5 ppm (mWJ..) (any one of6 units for Cups, Mugs nnd Pitchers) 3.0 ppm. (mp/L) (any one of6 tmits for Flatware)

BL

BY U.b Nwnber: (8513)284-0788




l'age 18 of 22

FOOD CONTAC r ARTICLE (VII)

l~\'l\lnntion Citation 11\lcthod No. of Crltcrln ltcsults ltntlng Snm lies ICNJ

External decorated lip and rim l!fea of beverage products shall

Glazed Ceramics and not contain extractable lead (Pb) and cadmium (Cd) exceed

Extractable lead and cadmituo in lip and Glassware Regulations the following limits in any of the 6 units: • 6 NA I nm (SOR/98-176) I CPSD- Cadmiwn (Cd): 0.4 ppm (mg/L) AN-00011-MTIII) Lead (Pb): 4.0 ppm (rug!L)

Note: For drinking vessel with decoration on lip and rim area (20 nun in height, measured from the superior edge.)

BL

BV lab Number: (8513)284-0788


Test Onto: OCT 18-28,2013

Reviewed IlyfDate: ALICE I OCT 28,2013

of22

FOOD CO NTA(.T ARTICLE (VI I)

Evnluntion Citation I 1\lcthod No. of Criteria llosult• n oting Sam lies Tho following products shall not contain any detectable levels ofBisphcnol-A (BI'A) (BV rer,;rting limit IS I ml?/kg): a. lnfhnt formula! baby food p astic container, jar or can b. All reusable food or beverage containers including their lids (if any), c. Baby products other than (a) and (b), d Straws

"Infant fonnuta• means a commercially available milk based or sor based powder, concentrated liquid or ready-to-feed substitute for human breast milk that 1s intended for infant consumption. "Baby food" means a commercially available prepared solid

Various US state laws food consisting of a soft p:lStc or an easily chewed food that is

(e.g. CT Public Act # intended for conswnption by children two years of nge or

09-1 03 and MN Chapter younger.

40 SF #247) I Canada •sa'rt; product• means products, including but not limited to

• Consumer Product paci 1crs, bibs, toys, changing pad ... ctc, intended to use by Bisphcnol A content Safety Act -- children three years of ago or younger. NA I

(S.C 201 O,c.21 ), "Reusable food or beverage container" means a receptacle for Schedule 2, item 151 storing food or beverages, including, but not limited to, baby

CPSD-AN-00169- bottles, spill-proof cup, sports bottles and U1ennoses, and

MTHD excluding containers mtendcd for disposal after initial usc.

Report actual results or include data table within report.

N01c: - Actual test in~ will be conducted on:

(i) all accessi le plastic materials in the product, ~i) food contact plastic p:111s in the product.

- endors shall be responsible for the compliance of all other matc:riaJs. - ll is nOI applicable on polycarbonate resins in infant feeding bottles (baby bottles) and spill-proof cups including their closures and lids, designed to help train babies and toddlers to drink from cups (sippy cups), as II is banned per 21 CFR 177.1580.

BL

E'•nh1;dion Citation I Method

Canada Consmncr Products Containing Lead (Contact witlt

• Total lead content in surface coatings Mouth) Regulations (SOR/2010-273) I CPSD-AN-00461 -

MTHD

BL

RV Lab Number.

Technician Name:

Test Date:

Reviewed [Jy/Datc:

1'00D CONTACf ARTICLE (VIl) No. of

Criterin Snruplcs [CN]

Products for aU ages (including adults) that have accessible surface coatings that c<Mne into contact with the user's mouth during normal use shall not contain lead or lead components in which the lead content is in excess of0.009'1o (90ppm) of the weight oftl1e total content.

I Report actual rest~ts or include data table within repcrt.

Component testing is allowed. Composiring is not allowed.

Note: The following products are excluded: -Kitchen utrnsiJs -Jewelry under C:hildren's Jewelry Regulations - Products subject to Glazed Ccmmic and Glassware ReJ,~rlntions.

(8513)284-0788

AARON

OCT 18-28,2013

ALICE I OCT 28,2013

of22

Results Rntlng

NA I

BV Lab Number: (8513)284-0788

Technician Name: /\/\RON

Test Dale: OCT 18-28,2013

Reviewed By/Date: ALICE I OCT 28, 2013

of22

FOOD CONTACI' AHTlCLE (VII)

fi:vnluntion Cllntion 1111cthotl No. or Crlt<rln Results lloting SRIIIJliCS [CNJ

Products for all ages (including adults) t1'1t have accessible substrates that come into contact with the user's mouth during nonnal usc shall not contain lead or lead components in which the lead content is in excess of0.009"/o (90ppm) of the weight of the total contcnL

Report actual rcs<dt• or include data table within report. Canada Consumer

Products Containing Component testing is allowed. Lead (Contact with Compositing is not aUowed.

• Total lead content in substrate materials Mouth) Regulations - Ni\ I (SOR/201 0-273) I Note: The following products arc exclude: CPSD·AN-00461- · Kitchen utensils.

MTHD ·Jewelry under Children's Jewelry Reb'Ulations - Prodtocts subject to Glazed Ceramic and Glassware Regulations. • TI1c following materials will be exempted from testing. It is the vendors responsibility to ensure compliance to Ulc applicable requirements: Non-suspect materials as defined by the Consumer Products Safety Commission in 16 CFR 1500.91 (d) and (c) (refer to «emption list oflead in substrate in tloc CPSD-GB-PTCL-08444-US protocol for detail)

BL

~ • •• #

Resull Key· c R M NM NA NT

Rntin" Key: I' ASS FAlL MARG

CAR

Additional Charge I' or This Test Mandatory Requirement By Request Only


Pass Fail Marginal Correclive Action Required

No. Or Samples Rec uired or omnletc Test in• No. or Fullv Packed) Cartons For Transit Testing: No. Of Working Days For Complete Testing:

BL

HV Lab Number:

Technician Name:

Test Date:

Reviewed By/Date:

- 12 retail products ocr stvlc Client Approval:

-7 Plcnse refer to supplemental protocol CPS D-AN-

PTCL-0600 I-US.

Crcotion Dnte: Lust Revision l)atc: Pricing Review Date: Technical Review Date:

(8513)284-0788

AARON

OCT 18-28,2013

ALICE / OCT28, 2013

of22

AUGUST 05, 2013/ Debbie Smith JANUARY 04, 201 1 OCTOBER 03, 2013

Bureau Veritas Shen Zhen Co., LTD

Report No: (8513)284-0788 Code: SZAI19 Prepared By: TracyLiu Date: Oct 24 2013 Checked By: c us Date: Oct 24 2013

U.S. FDA 21 CFR part 176.170- Components of paper and paperboard in contact with aqueous and fatty foods

Condition of use: E) Room temperature filled and stored Extracting condition: Water (120 "F, 24 hours), Heptane (70 'F, 30min)

Tested Item 1 Chloroform- soluble extractives 0.09 (solvent: distilled water) , mg/in2

Chloroform - soluble extractives 0.14

(solvent: n-heptane), mg/in2

Conclusion PASS

Tested Item I : White paper

Note: mg/in2 =milligrams per square inch of coated surface <=less than

Requirements

0.5 mg/in2

0.5 mg/in2

I

Pagel of!

Bureau Veritas Shen Zhen Co., LTD

Report No: (8513)284-0788 Code: SZA109 Prepared By: Tracy Liu Date: Oct 24 2013 Checked By: Cyrus Date: Oct 24 2013

U.S. FDA 21 CFR part 177.1520 -Olefin polymer

Client claimed material: Polypropylene homopolymer

Test Item 1 Requirements Density (glee) 0.896 0.88-0.913 n-hexane extractives(%) 2.17 6.4 Xylene extractives(%) 3.29 9.8 Melting point (0C) 168 160-180 Conclusion PASS I

Tested Item I: Translucent plastic

Note: < ~ less than

Page 1 of 1

report - regent products corp.fly lab number: (8513)284-0788 tcclmician nruue: aaron test date: oct...

Documents