report - project objectives 2... · report . project number: ... mttn, aitt, agepi , total number...
TRANSCRIPT
Technological Transfer Network Project
(Project number: 544197–TEMPUS–1–2013–1–
IT–TEMPUS-JPHES)
WP2, D2.6
Master programme deployment
REPORT
Project Number: 544197–TEMPUS–1–2013–1–IT–TEMPUS-JPHES
Project Acronym: TecTNet
Result: WP2 – Master programme realisation
Deliverable number and title: D2.6 - Master programme deployment
Type of deliverable: Report
Required date of delivery: -
Date of last version delivery: March 8, 2016
Work package: WP2 Master programme realisation
Lead responsible partner: TUKE
Responsible person: Ján Šaliga
Other cooperating partners: UNISANNIO, IST, TUIASI, TUM, USAM, USM, USARB,
MTTN, AITT, AGEPI,
Total number of pages: 26 with appendix
Content
1. Introduction ..................................................................................................................................... 1
2. The lecturers in the Master programme pilot run .......................................................................... 2
3. Master Thesis Defence .................................................................................................................... 3
4. Conclusions ...................................................................................................................................... 7
5. Appendix – Report of Moldovan partner universities for the Ministry of education of Moldova
and Ministry of agriculture and food industry of Moldova ..................................................................... 8
1
1. Introduction
In this document, the deployment of master study programme developed within TEMPUS TecTNet
project in pilot run is described. The deployment of the master covered a period of 24 months. The
student work load corresponded to 120 ECTS. The master was organized in 12 modules composed of
frontal lessons, e-learning lessons, home work, internships, visits, team projects, intermediate
evaluations and final exams. In particular, about the internship for the 12 non-staff trainees was
scheduled a trip of 1 month at the EU partners’ site. For the 8 staff trainees the training activities was
performed as it was required in WP.4
The master program "Management of Innovation and Technology Transfer" was launched on 15
September 2014. Teaching staff involved in master courses belong to the specialized departments
and faculties of the partner universities (Moldovan and European), as well as, from the specialized
institutions from Moldova. The knowledge gained by the students of the program will be applied
within management activities in the Innovation Incubators and Scientific-technological Parks; in
consulting activities in the offices specialized in technology transfer, innovation and business
incubators, in the innovation field within public and private sector; elaboration of the technological
transfer projects and coordination of Technological Transfer Offices and departments of research and
innovation within enterprises; in the field of intellectual property protection management
,evaluation and commercialization of intellectual property objects, in organization and efficient
management of the activities at the level of the economical innovative entity.
2
2. The lecturers in the Master programme pilot run
Nr. crt.
Discipline Lecturer Teaching degree and
diploma University
1. Technology Management
Lucache Dorin prof., dr.ing. UT Iasi
Litvin Aurelia DSc., Associate Professor SAUM
2. Management and Intellectual Property Rights
Spatari Mariana PhD., senior lecturer SUARB
Ţiganaş Ion Moiosei A Grosu P. Badâr Iurie
dr. Vice genre. Director director dep.juristic Deputy dir.dep inventions PhD., director Economy direction
AGEPI
3. Data processing Ramos Helena prof., dr.ing. IST
Ciobu Victor Senior Lecturer SUM
4. Applied Statistics Ribeiro Artur Lopes
prof., dr.ing. IST
Nuca Ilie conf., dr.ing. TUM
5.
Applied Psychology, Techniques of Communication and Human Resource Management
Priţcan Valentina dr., assoc. SUARB
Francesco Vespasiano
prof. UniSannio
6. Strategic Management Jalencu Marian dr., assoc. SUM
Badâr Iurie PhD., director direction Economy
AGEPI
7. Applied English Guvir Stela MSc TUM
8. Management and Design of European Projects
Haba Cristian prof., dr.ing. UT Iasi
Zbanca Andrei dr., assoc. SAUM
9. Innovation and Technology Transfer
Chirca Roman Suditu Natalia
AITT
Jalencu Marian dr., assoc. SUM
10. Modern Technologies and Innovations in Engineering
Topala Pavel DSc., prof. SUARB
Linus Michaeli prof., dr.ing. Tuke
11. Tools and Technologies for IT Innovations
Saliga Jan prof., dr.ing. Tuke
Chiciuc Andrei conf., dr.ing. TUM
12. Marketing and Business Administration
Litvin Aurelia DSc., Associate Professor SAUM
Reviezzo Angelo dr. UniSannio
13. Quality management
Ţurcan Iuliu dr., assoc. prof. TUM
Varzari Vitalie dr. MTTN
Plămădeală Igor MSc AITT
3
3. Master Thesis Defence
Defence of master thesis was ensured in accordance with:
- Regulation regarding the organization of higher master studies, cycle II, Appendix the H. G.
no. 1455 of 24 December 2007;
- Project requirements. NO -1 544 197 - 2013-1 - IT - TEMPUS-JPHES " Technological Transfer
Network ";
- Decisions meetings within the project.
Defence of the master’s thesis took place in the Academy of Sciences with the organizational support
of AITT and MTTN on 02/12/2016.
The group of students admitted to the defence of master thesis was 17: TUM-4, SAUM-4, SUM-5 and
SUARB-4.
1. Balmuș-Andone Mihaela, USM
2. Bulimaga Tatiana, USM
3. Ciobanu Cristina, USARB
4. Cojocari Dumitru, UTM
5. Gatman Denis, USARB
6. Gorobeț Radion, UASM
7. Hriplivîi (Mihailov) Tatiana, USARB
8. Hubca Ana, UTM
9. Nuca Dumitru, UTM
10. Perdeleanu Margareta, USM
11. Popa Ștefan, USM
12. Popa Grigore, UASM
13. Reșitca Rodica, UASM
14. Sclifos Igor, UASM
15. Titușchina Tatiana, USM
16. Țurcanu Adrian, UTM
17. Usatîi Ruslan, USARB.
4
According to the decision of the II meeting of the consortium from 30 April 2015, the TecTNet project
coordinator Daponte Pasquale was recommended as the Chairman of the evaluation of the master
thesis.
The approval of Evaluation Commission regarding master thesis was carried out individually by each
university for its master students:
According to the order no. 890-r of 11.30.2015 the Evaluation Commission for the master thesis in
„Innovation Management and Technology Transfer” program within Technical University of Moldova
was approved.
P. Daponte, professor, Department of Engineering, University of Sannio, Benevento, Italy - President
of the Commission.
Todos P., Ph.D., professor, first vice-rector TUM - Vice President of the Commission.
Members:
I. Volentir Ph.D., Associate Professor, Head of Educational Department, State Agrarian University of
Moldova.
F. Paladi, PhD, professor, vice-rector for Research, State University of Moldova.
V. Priţcan, Ph.D., Associate Professor, vice-rector for Research and International Relations, Alecu
Russo State University of Bălţi
Secretary:
Svetlana Crocus, engineer, Electro mechanics and Metrology Department, TUM.
By Order no. 916 of 23.12.2015 the Evaluation Commission for the master's thesis in „Innovation
Management and Technology Transfer” program within State Agrarian University of Moldova was
approved.
P. Daponte, professor, Department of Engineering, University of Sannio, Benevento, Italy - President
of the Commission.
I. Volentir Ph.D., Associate Professor, Head of Educational Department, State Agrarian University of
Moldova - Vice President of the Commission.
Members:
A. Chiciuc, Ph.D., Associate Professor, Chair of National Agency for Quality Assurance in Professional
Education.
F. Paladi, PhD, professor University vice-rector for Research, State University of Moldova.
Valentina Priţcan, Ph.D., Associate Professor, vice-rector for Research and International Relations,
Alecu Russo State University of Bălţi
Secretary:
5
R.Bantaş, Lecturer, Department of electrification and rural automation, State Agrarian University
Moldova.
By Order no. 205 of 12.01.2015 the Evaluation Commission for master's thesis in „Innovation
Management and Technology Transfer” program within State University of Moldova was approved.
P.Daponte - professor, University of Sannio, Benevento, Italy. Engineering Department -President of
the Commission.
F. Paladi, PhD, professor, University vice-rector for Research, State University of Moldova - Vice
President of the Commission.
Members:
A. Chiciuc, Ph.D., Associate Professor, Chair of National Agency for Quality Assurance in Professional
Education
I.Volentiri, Ph.D., Associate Professor, of Educational Department, State Agrarian University of
Moldova.
V. Priţcan, Ph.D., Associate Professor, vice-rector for Research and International Relations, Alecu
Russo State University of Bălţi
Secretary:
Alisa Curlicovschi - lecturer, State University of Moldova.
By Order no. 1-122 from 12.24.2015 the Evaluation Commission for the master’s thesis in
„Innovation Management and Technology Transfer ” within State University "Alecu Rosso" from Balti
was approved .
P.Daponte, professor, University of Sannio, Benevento, Italy. Engineering Department-President of
the Commission.
V. Priţcan, Ph.D., Associate Professor, vice-rector for Research and International Relations, Alecu
Russo State University of Bălţi - Vice President of the Commission.
Members:
A. Chiciuc, Ph.D., Associate Professor, Chair of National Agency for Quality Assurance in Professional
Education
F. Paladi, PhD, professor, University vice-rector for Research, State University of Moldova
I.Volentiri, Ph.D., Associate Professor, Head of Educational Department, State Agrarian University of
Moldova.
Secretary:
6
Svetlana Melnik, methodologist-coordinator, Department of Scientific Research and International
Relations, SUARB.
At the defence of master thesis participated:
Jan Saliga - project partner responsible for the work package WP2 – Master Program Realization,
University of Košice (Tuke), Slovakia, Dorin Lucache - partner of the Technical University from Iasi (UT
Iasi), Romania, other project partners and guests from the EU and Moldova.
Secretarial work were made by secretaries from Evaluation Commissions of the thesis, individually,
each for his university.
7
4. Conclusions
The deployment of the developed master study program was performed in pilot run as it was
requested in the approved TEMPUS project. The detail description of deployment can be found in the
Appendix, which contains the Report of MD partner universities for the Ministry of education of
Moldova and Ministry of agriculture and food industry of Moldova.
8
5. Appendix – Report of Moldovan partner universities for the
Ministry of education of Moldova and Ministry of agriculture and
food industry of Moldova
1
MINISTRY OF EDUCATION OF MOLDOVA
MINISTRY OF AGRICULTURE AND FOOD INDUSTRY OF
MOLDOVA
Technical University of Moldova
State Agrarian University of Moldova
State University of Moldova
”Alecu Russo” State University of Bălţi
REPORT
Regarding the activity of the Commission assessment on the master thesis within the
program
“Innovation Management and Technology Transfer"
(Professionalization)
General Field of study - 52 Engineering and engineering activities
Chisinau 2016
2
MINISTRY OF EDUCATION OF MOLDOVA
MINISTRY OF AGRICULTURE AND FOOD INDUSTRY
OF MOLDOVA
TECHNICAL UNIVERSITY OF MOLDOVA
STATE AGRARIAN UNIVERSITY OF MOLDOVA
STATE UNIVERSITY OF MOLDOVA
”ALECU RUSSO” STATE UNIVERSITY OF BĂLŢI
Faculty of Energetics and Electrical Engineering (TUM)
Faculty of Agrarian Engineering and Auto Transport (SAUM)
Faculty of Physics and Engineering (SUM)
Faculty of Exact, Economics and Environmental Sciences (SUARB)
EDUCATIONAL PLAN
General field of study 52 - Engineering and engineering activities
Master's program- Innovation Management and Technology Transfer (MP)
The total number of study credits - 90
The title awarded - Master in engineering and engineering activities
The organizational type of education: frequency
3
UNIVERSITY CALENDAR
Year of
study
Educational
activities
Examination
sessions Internship vacations
Sem.I Sem.II Winter Summer Winter Spring Summer
First year 15 15 4 4 - 2 1 8
Second
year 15 - 4 4 5 4 1 -
CURRICULUM PLAN FOR EACH SEMESTER/ YEARS OF STUDY
Code Title of the course unit
To
tal
ho
urs
Inclusive
Ev
alu
ati
on
Fo
rm
EC
TS
con
tact
ind
ivid
ual
work
1 2 5 6 7 5 9
I Year, sem. 1
F.01.O.001 Technology Management 150 35 115 E 5
F.01.O.002 Management and Intellectual Property Rights 150 35 115 E 5
S.01.O.003 Data processing 150 35 115 E 5
S.01.O.004 Applied Statistics 150 35 115 E 5
S.01.O.005
Applied Psychology, Techniques of
Communication and Human Resource
Management
150 35 115 E 5
S.01.A.006 Strategic management 150 35 115 E 5
S.01.A.007 Philosophy of Science
Total semester 1 900 210 690 30
I Year, sem. 2
F.02.O.009 Management and Design of European Project 150 35 115 E 5
S.02.O.010 Innovation and Technology Transfer 150 35 115 E 5
S.02.O.011 Modern Technologies and Innovations in
Engineering 150 35 115 E 5
S.02.O.012 Tools and Technologies for IT Innovations 150 35 115 E 5
S.02.O.013 Marketing and Business Administration 150 35 115 E 5
S.02.A.014 Quality Management 150 35 115 E 5
S.02.A.015 Cultural Affairs
Total for semester 2 900 210 690 30
Total for the first year 1800 420 1380 60
II Year , sem. 1
Internship, elaboration and defense of the master thesis 900 900 30
Total for the second year 900 900 30
TOTAL for the years of study 2700 420 2280 90
LIST OF FREE CHOICE COURSES
Code Title of the course unit
Tota
l h
ou
rs
Inclusive
Evalu
ati
on
Form
EC
TS
CD LI
S.01.L.008 Applied English 150 35 115 E 5
S.02.L.016 Business Law 150 35 115 E 5
4
Code Title of the course unit
To
tal
hou
rs
Inclusive
EC
TS
Ev
aluat
ion F
orm
First year year II
Dir
ect
con
tact
indiv
idu
al
work
sem
este
r I
sem
este
r II
sem
este
r II
I
1 2 5 6 7 5 9 10 11 12
The component of course units / fundamental modules
F.01.O.001 Technology Management 150 35 115 5 E 35
F.01.O.002 Management and Intellectual
Property Rights 150 35 115 5 E 35
F.02.O.009 Management and Design of
European Projects 150 35 115 5 E 35
Total hours 450 105 345 15 3 70 35
The component of course units / field modules (mandatory)
S.01.O.003 Data Processing 150 35 115 5 E 35
S.01.O.004 Applied Statistics 150 35 115 5 E 35
S.01.O.005
Applied Psychology, Techniques
of Communication and Human
Resource Management
150 35 115 5 E 35
S.02.O.010 Innovation and Technology
Transfer 150 35 115 5 E 35
S.02.O.011 Modern Technologies and
Innovations in Engineering 150 35 115 5 E 35
S.02.O.012 Tools and Technologies for IT
Innovations 150 35 115 5 E 35
S.02.O.013 Marketing and Business
Administration 150 35 115 5 E 35
Total hours 1050 245 805 35 7 105 140
The component of course units / specialized modules (optional)
S.01.A.006 Strategic Management 150 35 115 5 E 35
S.01.A.007 Philosophy of Science
S.02.A.014 Quality Management 150 35 115 5 E 35
S.02.A.015 Cultural Affairs
Total hours 300 70 230 10 2 35 35
The component of course units / modules to free choice
S.01.L.008 Applied English 150 35 115 5 E 35
S.02.L.016 Business law 150 35 115 5 E 35
Total hours 300 70 230 10 2 35 35
Master Thesis
Internship, elaboration and defense of the
master thesis 900 900 30 900
Total
Total hours 2700 420 1380 210 210
Exams 12
Number of ECTS credits 90 30 30 30
5
General aspects
Aligning higher education in Moldova to the requirements of the Bologna
process, besides of the involvement and introducing various modern criteria in order
to train qualitative specialists, it involves a continuous ensuring of implementation
of knowledge gained throughout the period of activity with achievement of a
rational correlation between theoretical - scientific and practical activities.
A good opportunity for consolidation synergies mentioned was the initialization
of the Association Agreement with the EU and its subsequent signing, after that,
institutions of higher education in the country, had to learn new meanings, the
development of which requires the Republic of Moldova to be orientated to the
integration into the European Community.
Technology transfer, represent the main segment in implementation of various
achievements, including scientific performance of teachers, scientists, etc., it is
caractarysis one of the most distinguishing activity of the developed European
countries, that is why the creation of a technical, scientific and methodical teaching
infrastructure in Republic of Moldova became more than welcome opportunity to
contribute to the strengthening of the mentioned synergy.
In December 2013 under Tempus IV Program, was initiated the project no.
544197-2013-IT-JPHES entitled „Technology Transfer Network - " Technology
Transfer Network "(TecTNet), which is implemented within a consortium
consisting of 11 partners from the European Union (EU) and Moldova (Moldova),
the implimentation period being until December 2016.
EU project partners:
Italy, University of Sannio from Benevento (UniSannio), Faculty of
Engineering - project coordinator;
Romania, Gh. Asachi Technical University from Iasi (UTIaşi) , Faculty of
Electrical Engineering;
Slovakia, Technical University of Košice (TUKE), Faculty of Electrical
Engineering and Computer Science;
6
Portugal, Lisbon's Higher Technical Institute (IST), Department of Electrical
Engineering and Computer.
Moldavian project partners - seven institutions:
four beneficiary university
Technical University of Moldova (TUM), Faculty of Energetics and
Electrical Engineering;
State Agrarian University of Moldova (SAUM), Faculty of Agricultural
Engineering and Transport;
State University of Moldova (SUM) , Faculty of Physics and Engineering;
State University ,, Alecu Russo " from Bălţi (SUARB), Faculty of Exact,
Economics and Environmental Sciences and the Office of International Relations;
and three specialized institutions
The nongovernmental organization " Moldovan Technology Transfer
Network " (MTTN);
Agency for Innovation and Technology Transfer (AITT);
State Agency on Intellectual Property (AGEPI).
One of the main objectives of the project was to achieve a master's program in
innovation and technology transfer.
Master's program "Innovation Management and Technology Transfer" is above
mentioned objective which represents a pilot program coordinated under the support
of Tempus TecTNet team, that has been funded by the European Union and
coordinated by the University from Sannio, Italy, being implemented by partners
from Republic of Moldova (TUM, SUM, SAUM, SUARB, MTTN, AITT, AGEPI)
and the European Union (UniSannio, UT Iasi, Tuke, IST).
The curriculum has been prepared according to the recommendations taken
from the Rules of organization and planning of master courses from Moldova, in
coordination with European partners, taking into consideration the best practices in
the partner countries (Italy, Romania, Slovakia, Portugal ).According to the
Regulation regarding the organization of higher master studies, approved by
7
Government Decision no. 1455 December 24, 2007, chapter II, pt. 9, based on the
results of internal evaluation to examine the case of institutional capacity to organize
master studies, the Ministry of Education has authorized (by order No.678 of June
23, 2013)the following universities: TUM ,SAUM, SUM and SUARB to prepare
in partnership the master program "Innovation Management and Technology
Transfer".
The master program "Management of Innovation and Technology Transfer"
was launched on 15 September 2014.
Preparation of the master program in partnership was regulated by the
Agreement between the universities within the framework of the TecTNet project
according to the requirements of the project and approved by all universities (Annex
1).
The credits recognition as the result of the mobility was provided by ECTS
Contracts which were signed according to the Agreement between each university
from Moldova as partner of the project and each student (Appendix 2).
Teaching staff involved in master courses belong to the specialized
departments and faculties of the partner universities (Moldovan and European), as
well as, from the specialized institutions from Moldova.
The knowledge gained by the students of the program will be applied within
management activities in the Innovation Incubators and Scientific-technological
Parks; in consulting activities in the offices specialized in technology transfer,
innovation and business incubators, in the innovation field within public and private
sector; elaboration of the technological transfer projects and coordination of
Technological Transfer Offices and departments of research and innovation within
enterprises; in the field of intellectual property protection management ,evaluation
and commercialization of intellectual property objects, in organization and efficient
management of the activities at the level of the economical innovative entity.
The structure of the staff for the Master program:
8
Table 1
Nr.
crt. Discipline Lecturer
Teaching degree and
diploma
uni-
sity
1. Technology
Management
Lucache Dorin prof., dr.ing. UT Iasi
Litvin Aurelia DSc., Associate Professor SAUM
2. Management and
Intellectual Property
Rights
Spatari Mariana PhD., senior lecturer SUARB
Ţiganaş Ion
Moiosei A
Grosu P.
Badâr Iurie
dr. Vice genre. Director
director dep.juristic
Deputy dir.dep inventions
PhD., director Economy
direction
AGEPI
3. Data processing Ramos Helena prof., dr.ing. IST
Ciobu Victor Senior Lecturer SUM
4. Applied Statistics
Ribeiro Artur
Lopes prof., dr.ing. IST
Nuca Ilie conf., dr.ing. TUM
5.
Applied Psychology,
Techniques of
Communication and
Human Resource
Management
Priţcan Valentina dr., assoc. SUARB
Francesco
Vespasiano prof. UniSannio
6. Strategic Management
Jalencu Marian dr., assoc. SUM
Badâr Iurie PhD., director direction
Economy AGEPI
7. Applied English Guvir Stela MSc TUM
8. Management and
Design of European
Projects
Haba Cristian prof., dr.ing. UT Iasi
Zbanca Andrei dr., assoc. SAUM
9. Innovation and
Technology Transfer
Chirca Roman
Suditu Natalia AITT
Jalencu Marian dr., assoc. SUM
10. Modern Technologies
and Innovations in
Engineering
Topala Pavel DSc., prof. SUARB
Linus Michaeli prof., dr.ing. Tuke
11. Tools and Technologies
for IT Innovations
Saliga Jan prof., dr.ing. Tuke
Chiciuc Andrei conf., dr.ing. TUM
12. Marketing and Business
Administration
Litvin Aurelia DSc., Associate Professor SAUM
Reviezzo Angelo dr. UniSannio
13. Quality management
Ţurcan Iuliu dr., assoc. prof. TUM
Varzari Vitalie dr. MTTN
Plămădeală Igor MSc AITT
Graduates can work in TTO, Innovation and Business Incubators, Technology
Parks, innovation and technology transfer associations /agencies, as well as agencies
for protection of intellectual property, innovative companies / joint ventures,
9
research departments of companies, educational and scientific research institutions,
government and ministries departments.
Master Thesis Defense:
Defense of master thesis was ensured in accordance with:
- Regulation regarding the organization of higher master studies, cycle II,
Appendix the H. G. no. 1455 of 24 December 2007;
- Project requirements. NO -1 544 197 - 2013-1 - IT - TEMPUS-JPHES
" Technological Transfer Network ";
- Decisions meetings within the project.
Defense of the master’s thesis took place in the Academy of Sciences with the
organizational support of AITT and MTTN on 02/12/2016.
The group of students admitted to the defense of master thesis was 17: TUM-4,
SAUM-4, SUM-5 and SUARB-4.
1. Balmuș-Andone Mihaela, USM
2. Bulimaga Tatiana, USM
3. Ciobanu Cristina, USARB
4. Cojocari Dumitru, UTM
5. Gatman Denis, USARB
6. Gorobeț Radion, UASM
7. Hriplivîi (Mihailov) Tatiana, USARB
8. Hubca Ana, UTM
9. Nuca Dumitru, UTM
10. Perdeleanu Margareta, USM
11. Popa Ștefan, USM
12. Popa Grigore, UASM
13. Reșitca Rodica, UASM
14. Sclifos Igor, UASM
15. Titușchina Tatiana, USM
16. Țurcanu Adrian, UTM
10
17. Usatîi Ruslan, USARB.
According to the decision of the II meeting of the consortium from 30 April
2015, the TecTNet project coordinator Daponte Pasquale was recommended as the
Chairman of the evaluation of the master thesis.
The approval of Evaluation Commission regarding master thesis was carried
out individually by each university for its master students:
According to the order no. 890-r of 11.30.2015 the Evaluation Commission for
the master thesis in „Innovation Management and Technology Transfer” program
within Technical University of Moldova was approved.
P. Daponte, professor, Department of Engineering, University of Sannio,
Benevento, Italy - President of the Commission.
Todos P., Ph.D., professor, first vice-rector TUM - Vice President of the
Commission.
Members:
I. Volentir Ph.D., Associate Professor, Head of Educational Department, State
Agrarian University of Moldova.
F. Paladi, PhD, professor, vice-rector for Research, State University of
Moldova.
V. Priţcan, Ph.D., Associate Professor, vice-rector for Research and
International Relations, Alecu Russo State University of Bălţi
Secretary:
Svetlana Crocus, engineer, Electro mechanics and Metrology Department,
TUM.
By Order no. 916 of 23.12.2015 the Evaluation Commission for the master's
thesis in „Innovation Management and Technology Transfer” program within State
Agrarian University of Moldova was approved.
P. Daponte, professor, Department of Engineering, University of Sannio,
Benevento, Italy - President of the Commission.
11
I. Volentir Ph.D., Associate Professor, Head of Educational Department, State
Agrarian University of Moldova - Vice President of the Commission.
Members:
A. Chiciuc, Ph.D., Associate Professor, Chair of National Agency for Quality
Assurance in Professional Education.
F. Paladi, PhD, professor University vice-rector for Research, State University
of Moldova.
Valentina Priţcan, Ph.D., Associate Professor, vice-rector for Research and
International Relations, Alecu Russo State University of Bălţi
Secretary:
R.Bantaş, Lecturer, Department of electrification and rural automation, State
Agrarian University Moldova.
By Order no. 205 of 12.01.2015 the Evaluation Commission for master's
thesis in „Innovation Management and Technology Transfer” program within
State University of Moldova was approved.
P.Daponte - professor, University of Sannio, Benevento, Italy. Engineering
Department -President of the Commission.
F. Paladi, PhD, professor, University vice-rector for Research, State University
of Moldova - Vice President of the Commission.
Members:
A. Chiciuc, Ph.D., Associate Professor, Chair of National Agency for Quality
Assurance in Professional Education
I.Volentiri, Ph.D., Associate Professor, of Educational Department, State
Agrarian University of Moldova.
V. Priţcan, Ph.D., Associate Professor, vice-rector for Research and
International Relations, Alecu Russo State University of Bălţi
Secretary:
Alisa Curlicovschi - lecturer, State University of Moldova.
12
By Order no. 1-122 from 12.24.2015 the Evaluation Commission for the
master’s thesis in „Innovation Management and Technology Transfer ” within
State University "Alecu Rosso" from Balti was approved .
P.Daponte, professor, University of Sannio, Benevento, Italy. Engineering
Department-President of the Commission.
V. Priţcan, Ph.D., Associate Professor, vice-rector for Research and
International Relations, Alecu Russo State University of Bălţi - Vice President of
the Commission.
Members:
A. Chiciuc, Ph.D., Associate Professor, Chair of National Agency for Quality
Assurance in Professional Education
F. Paladi, PhD, professor, University vice-rector for Research, State University
of Moldova
I.Volentiri, Ph.D., Associate Professor, Head of Educational Department, State
Agrarian University of Moldova.
Secretary:
Svetlana Melnik, methodologist-coordinator, Department of Scientific
Research and International Relations, SUARB.
At the defense of master thesis participated:
Jan Saliga - project partner responsible for the work package WP2 – Master
Program Realization, University of Košice (Tuke), Slovakia, Dorin Lucache -
partner of the Technical University from Iasi (UT Iasi), Romania, other project
partners and guests from the EU and Moldova.
Secretarial work were made by secretaries from Evaluation Commissions of the
thesis, individually, each for his university.
The list according to the consecutiveness of master theses defense and list in
descending order of overall master notes, tab. 2 and 3, represent the summary
information / generalized for all universities.
13
According to the decision of the second meeting of the project consortium from
30 April 2015, in the addition list of the master diploma, information regarding the
”position number in the table among graduates" will be reported to the total number
of graduates (Table 3, General mark).
The content and quality of master thesis
The theme of master’s thesis corresponds to the actual requirements and
TecTNet project's recommendations.
Thesis’s content were focused on the current issues which took place within
different institutions and real enterprises from national economy. The subjects and
the scientific research fundament were up to date.
In several theses were used the information reflected from internships
undertaken in universities from EU partner countries.
Thesis consisted of theoretical analysis, individual study of various current
issues, elaborations, experiments with scientific elements, etc.
The presentations were made on the computer, in English PowerPoint.
Quality of the presentation, graphics, eloquence, responses to the questions
were at a higher level.
The average grade at the Defense of master’s thesis was 9.76, and the success
of Defense 100%.
The results of master’s thesis Defense
Table 2
The list of master thesis Defense according to consecutiveness
n / a Name, Surname Average
mark
Master's
Thesis
General
mark
Univer
sities
1 BALMUȘ-ANDONE Mihaela 9.85 10 (ten) 9.92 SUM
2 BULIMAGA Tatiana 10 10 (ten) 10.00 SUM
3 TITUȘCHINA Tatiana 9.69 10 (ten) 9.84 SUM
4 PERDELEANU Margareta 9.17 9 (nine) 9.08 SUM
5 POPA Ștefan 9.22 10 (ten) 9.61 SUM
6 ȚURCANU Adrian 9.36 10 (ten) 9.68 TUM
7 SCLIFOS Igor 8.99 10 (ten) 9.49 SAUM
8 RESITCA Rodica 9.50 10 (ten) 9.75 SAUM
9 HUBCA Ana 9.23 10 (ten) 9.61 TUM
14
10 CIOBANU Cristina 9.00 10 (ten) 9.50 SUARB
11 USATÎI Ruslan 9.00 10 (ten) 9.50 SUARB
12 MIHAILOV (HRIDLIVÎI)
Tatiana 9.17 10 (ten) 9.58
SUARB
13 GATMAN Denis 8.83 9 (nine) 8.91 SUARB
14 GOROBET Rodion 9.25 9 (nine) 9.12 SAUM
15 POPA Grigore 9.50 10 (ten) 9.75 SAUM
16 NUCĂ Dumitru 9.26 10 (ten) 9.63 TUM
17 COJOCARI Dumitru 9.23 9 (nine) 9.11 TUM
Table 3
List in order of decreasing notes
n / a Name, Surname Average
mark
Master's
Thesis
General
mark
uni-
sities
1 BULIMAGA Tatiana 10 10 (ten) 10.00 SUM
2 BALMUȘ-ANDONE Mihaela 9.85 10 (ten) 9.92 SUM
3 TITUȘCHINA Tatiana 9.69 10 (ten) 9.84 SUM
4 RESITCA Rodica 9.50 10 (ten) 9.75 SAUM
5 POPA Grigore 9.50 10 (ten) 9.75 SAUM
6 ȚURCANU Adrian 9.36 10 (ten) 9.68 TUM
7 NUCĂ Dumitru 9.26 10 (ten) 9.63 TUM
8 HUBCA Ana 9.23 10 (ten) 9.61 TUM
9 POPA Ștefan 9.22 10 (ten) 9.61 MSU
10 MIHAILOV (HRIDLIVÎI)
Tatiana 9.17 10 (ten) 9.58
SUARB
11 CIOBANU Cristina 9.00 10 (ten) 9.50 SUARB
12 USATÎI Ruslan 9.00 10 (ten) 9.50 SUARB
13 SCLIFOS Igor 8.99 10 (ten) 9.49 SAUM
14 GOROBET Rodion 9.25 9 (nine) 9.12 SAUM
15 COJOCARI Dumitru 9.23 9 (nine) 9.11 TUM
16 PERDELEANU Margareta 9.17 9 (nine) 9.08 SUM
17 GATMAN Denis 8.83 9 (nine) 8.91 SAUM
Table 4
Marks at the Defense of the master thesis
Notes Number of opinions In
%
Ten 13 76.4
nine 4 23.6
Total 17 100
Objections
15
During the defending of master thesis, were pointed out some objections such
as:
Some works required more applied / experimental part;
In some theses the proposals for applying the results were too generally
explained.
Recommendations:
Based on the results of the support master thesis, presentations and discussions
based on the Defense, the Commission in partnership (all university members)
comes with the following recommendations:
To take necessary measures to implement theses results in production, by
using technology transfer offices within universities;
President of the Commission
Head of the Evaluation Committee,
TecTNet project coordinator, Dr.h.c.,
Immediate Past President of IMEKO,
IEEE Fellow Member,
Department of Engineering
of the University of Sannio, ITALY Pasquale Daponte
The Secretaries of Master Theses
Evaluation Committee
:
TUM / / Svetlana Brânduş
SAUM / / Roman Bantaş
SUM / / Alisa Curlicovschi
USARB / / Svetlana Melnik