report distribution managements

8/11/2019 Report Distribution Managements

1/7

Types of distribution process

Devides by two method that company Total Logistics Services use such as :

i. MILKRUN

Mikrun is the delivery method for mixed loads from differents suppliers. Instead of

each of several supplier sending a vehicle every week to meet the weekly need of a

customer one vehicle visits each supplier on a daily basis and pick up deliveries for that

customer. This ways, while still five vehicle load are shipped every week, each vehicle

load delivers the fully daily requirements of the customers from each supplier.

Diagram (A) : Process about MILKRUN.

From the diagram talk about the process of MILKRUN. It is many benefits when the

TLS used this method for the distribution process. Conclusion from the diagram, a truck can

pick up many types of materials originating from several suppliers and drop ogf goods

destined from various customers all in the same run. This allow direct pick-up and drp-off to

be planned more frequently without having to wait for full truckloads which in turn enables

both inventory levels and response time to be reduced.


2/7

Advantages from this method :

1)

Decrease trucking cost.

2) More costs saving and efficient custom declaration.

3)

Reduces cargo damages due to avoiding loading / unloading goods.

4) Environmental protection due to less land transportation and carbon footprint.

ii. Directing delivery

Manufacturer in which delivery good are sent directly to the supplier without using an

intermediaries such as third party logistics.

Diagram (B) : Process Direct Delivery

Advantages when Total Logistics using this method :

a) Decrease damages of goods.

b)

The good delivery to customers on time and the right place.

c) Reduce times.

d) Cannot using any intermediaries can cause reducing the costs.

Conclusion , Total Logistics Services used this method because this method can help their

company more advanced in the country. So that, the method is very well when the Total

Logistics used this method.

Manufacturer

Supplier A

Supplier B

Supplier B


3/7

Why the Total Logistics Services used and need of transportation?

Transportation is defined the movement of people, animals, and goods from one locations

to another places. There are several modes of transport includes in transportation such as :

1) Road

2) Water

3)

Air

4) Pipeline

5) Rail

The field can be devided into infrastructures vehicles and operations. Total Logistics

Service used the Freight Forwarder services to manages their services. Besides , Total

Logistics only manages their documents only for exsport and import the goods. Total

Logistics need transportation because it is very important to move the good from

manufacturer to the supplier. There are several important Total Logistics Services need used

the transportation such as :

i.

Makes available goods to customers.

Transport provides employment opportunity to individuals as drivers and conductors.

It also provides employment to people indirectly in the industries producing various

means of transport and other transport equipments.

ii. Help during emergencies and natural calamities

In times national crisis, due to war or internal disturbance, transport help in quick

movement of troops and supplies needed in the operation.

iii. Help available raw materials to manufacturers or producer.

Transport make it possible to carry raw materials from places where they are available

to places where they can be processed and assembled into finished goods.


4/7

Total Logistics Services used the GPS system for traced the the container or truck.

The essence of the system includes 24 satellites that rotate around the earth twice

daily. The satellites are in six different orbits, and are positioned at a precise angle in relation

to the equator. Interestingly, while most of the satellites are constantly active, some of them

are in standby mode.

TLS used the GPS system for traced moving the container to collect the information

from applicable satellite based on its current location. Furthermore, the companies can

managed their movements of good smoothly because the information that are received very

detail and succesfully. There are several benefits when the TLS used the GPS such as :

i. GPS tracking

Keeping track of your vehicles will keep your overhead down. The other end of

tracking is keeping track of movement goods, a GPS tracking system will aid in your

efforts.

ii. Know more information about the movement of container and trucks.

From used this system TLS can trace the information about themovement and location

of the container .

iii. Work in all weather so you need not to worry of the climate as in other navigating

devices.

iv. Due to its low cost because not use guide to move the goods in the country.

Conclusion , system GPS is more important for the company Total Logistics Services

because it can help the company to know more information from their movement of good fro

one point origin to another origin. So that, TLS used this system for regard their services.


5/7

THE PHYSICAL DISTRIBUTION FLOW MANAGEMENT FROM TOTAL

LOGISTICS SERVICES

BASICS WAREHOUSE OPERATION DIAGRAM


6/7

WAREHOUSE MANAGEMENT SYSTEM DIAGRAM (WMS)

Z-Logix is web-based Warehouse Management System (WMS) that support day-to-day

operation in all TLS warehouse. All Inbound and Outbound transactions must go through a

scanning process before the transactions can be completed. All Locations and Packages will

be bar-coded and scanned during the process. The WMS is able to track the status for every

single box or pallet stored in our warehouse through a Product ID (PID) that's automatically

assigned by the system.


7/7

Layout of the distribution process that Total Logistics Services

Definition layout?

Layout is defined planning the flow of materials is important in a warehouse. This is

because with a plan we would most likely be aware of the location of items. In the warehouse

and also the status and location of equipment with the information better control of the

warehouse can be achieved.

Objectives layout

1. Providing comfort to the workers and catering to worker taste and liking.

2.

Giving goods and improved working conditions.

3. Minimizing delays in productions and making efficient use of the space that is

available.

4. Having better control over the productions cycle by having greater flexibility for

changes in the design of the product.

Types of layout.

There are three types of layout such as:

1) Process layout

These layout are also called the functional layouts and are very suitable in the

conditions when the product being prepared are non- standard or involved wide

variations in times of processing of the individuals operation.

2)

Product layout

These layout are also known as the line layouts by sequence in such layouts the

manufacturing cycle is small with minimum material handling. The space required is

small and quality control is easy to exercise.

3) Project layout

Such layouts are also referred to as the fixed position layouts the components , heavy

materials sub assemblies all remain fixed at one place and the job is completed by

movements of machines men and tools to the locations of the operations.

report distribution managements

Documents