renov instal at ions system 2011 cpg
TRANSCRIPT
8/6/2019 Renov Instal at Ions System 2011 CPG
http://slidepdf.com/reader/full/renov-instal-at-ions-system-2011-cpg 1/2
Rnsrin nd hisri rsrin rjs place special demands
on the building team. Whether your design requires absolute adherence to
historical authenticity or simply aims to respect the scale and design language
of another era, Pella offers the rds, insin syss nd hni
ssisn that will help you achieve every detail of your design objectives.
For an in-depth review of Pella Commercial installation systems and
construction details for replacement and renovation, refer to pellaadm.com
or contact your local Pella commercial representative.
complete teaR-out of ext a a fRame
aiin:When complete tear-out is necessary for historical, aesthetic or structural considerations.
• Custom-size units available.
• Good for virtually any existing opening.eising cnsrin
d
Replacemet of a ol — u fRame expaeR
aiin:When wood or metal windows are accessible from the exterior.
• Economi cal method of
window replacement.
• Exi sting window frames are
not removed.
• Low-maintenanc e aluminum
trim matches Pella® products.
• Updat es exterior trim or
covers existing trim that is in
poor condition.
Wirtz Building,Chicago,IL
I — Installation Systems
Utilicorp United World Headquarters
Kansas City,M
Waksman Institute of Microbiology
Madison,J
Replacemet of a ol — u pocket tallato
aiin:When the existing frames are in good condition and only the sash needs to be replaced.
• Ful ly assembled Precision Fit®
double-hung, casement, awning
and xed windows.
• S lides easily into existing pocket.
• Trim, wallcoverin gs, paint and
plaster are usually not disturbed.
• Eliminates cost and inconvenience
of a complete tear-out.
Replacemet of a ol — u taaR ubfRame tem
aiin:When replacing wood windows.
• Alu minum subframe is
preassembled and installed
into openings.
• Concea ls existing wood
window frame to become
“receptor” for new window.
• Allows installation from
inside building.
• R educes labor costs and
eliminates need for exterior
scaffolding and its expense.
Replacemet of a ol — u t-ubfRame tem
aiin:When replacing metal windows.
• Alu minum subframe is
preassembled and installed
into openings.
• Concea ls existing metal
window frame to become
“receptor” for new window.
• Allows installation from
inside building.
• R educes labor costs and
eliminates need for exterior
scaffolding and its expense.
Pella’s sndrd sr nd t-sr syss for window replacement reduce labor costs of installation of new
window sash with minimal disturbance to existing construction. hese systems allow installation of new units from
inside the building, eliminating the need for exterior scaffolding and its expense.
McGinnis School
Perth mboy,J
Hotel ndaluz
lbuquerque,M
d
eising cnsrin
fr
endr
brid
eising cnsrin
d
eising cnsrin
r
d
eising cnsrin
t-r
d
brid
8/6/2019 Renov Instal at Ions System 2011 CPG
http://slidepdf.com/reader/full/renov-instal-at-ions-system-2011-cpg 2/2
FM PS ISLLI SSMS
here are ny ins r insing Pella® Impervia® berglass
composite windows in new construction and renovation projects:
niing ns; ngs; rs wih ns, snry is r
j srws, nd t-srs.
Continuous perimeter niing ns are used when construction
methods permit window and door units to be insd r h
rir prior to the application of exterior cladding — such as lap
siding, brick veneer or stucco.
msnry is, j srws r t-srsare used when
construction materials or sequence dictates that the window
units be insd r h inrir or after the wall system is
completely constructed.
For an in-depth review of Pella Commercial’s full range of
installation systems and construction details for new construction
and renovation, refer to pellaadm.com.
ot all installation methods are available on all products. Check with your local Pella
commercial representative for details.
teRal f
flu flae
The integral fin design features a
continuous fin, allowing the window
frame to be integrated into the building’s
weather-resistant barrier using the Pella
Window and Door Installation Method.1
This total installation solution includes our
exclusive SmartFlash® installation tape
and Great Stuff ™ Pro Window & Door
Insulating Foam Sealant by The Dow
Chemical Company.2
The flush flange frame is designed specifically
for replacement applications on stucco
exteriors in arid climates like those found in
the southwestern part of the United States.
The flush flange allows for quick installation
without removing the existing frame or
damaging the stucco exterior.
he r provides a variety of attachment and installation options. Windows can be installed in wood/steel frame
openings using in ns, or in masonry openings using insin is or j srws. Block frames may also be
used in window replacement projects without removing the existing frame or damaging the exterior.
ngr fin
b fr
block fRame Wt offet f
block fRame Wt tallato clp
block fRame Wt cReW attacmet
For new construction or
window replacement where
normal fin/tape installation
cannot be accomplished
because of wall conditions
or construction sequence.
The continuous offset nailing fin is
designed for use in new construction
with thin exterior claddings like
stucco, thus allowing the window to
be located more to the interior. When
the offset is not required, a standard
profile fin is available (shown at the
left with dashed lines).
For new construction or window
replacement where wall conditions
or construction sequence requires
installation from inside the building.
Installation from exterior with integral fin.
1 his method is applicable for installation of Pella windows and doors only. Pella warranty does not recommend use with other manufacturers’ products.
2 Great Stuff ™ is a trademark of he ow Chemical Company (“ow”) or an affiliated company of ow.
fsh fng
block fRame Wt t-ubfRame
For window replacement
requiring installation from
inside the building, Pella’s
T-subframe system reduces
labor costs by eliminating
the need for exterior
scaffolding.
eising cnsrin