renewable energy division - thesan s.p.a. · trenewable energy division ... over europe, south...
TRANSCRIPT
3
Thesan S.p.A.
Thesan around the world
Renewable Energy Division
Thesan Mounting System Presentation
Innovation, quality, warranty and certificates
Structural controls
Flat roof solutions “Azimuth 0” System
“Est-Ovest” System
“Triangle” System
Flat roofing accessories
Sloped roof solutions “Universal” System with brackets, for tiles and Roman tiles
“Universal” System with double-threaded screws
“Universal” System with anchoring base for corrugated sheet roofs
“Universal Light” System with locking brackets
“Plan” System with structural tape for corrugated sheet roofs
“Little Plan” System with EPDM tape for corrugated sheet roofs
Slooped roofing Accessories
Ground system solutions Single pole support system
Double pole support system
Supports
Ground system accessories
Photovoltaic shelter solutions
Mounting System accessories Fixing clamps
Accessories
Plugs
Cable locks and cable lock ducts
Screws and accessories
The Muse in Trento
Hemera Presentation
Complete insulated photovoltaic roofing system
Accessories
04
05
06
11
12
14
19
19
19
20
22
22
22
23
23
23
24
39
40
42
44
46
48
54
55
56
57
62
65
66
68
Index
Index
4 Thesan S.p.A.
In 2012, Thesan Group reached a turnover of € 85 million, thanks to the collaboration of 450 employees
and to the research and development of new products and innovative solutions.
The high investments in research and development, which allow Savio to launch into the markets
new products with high technological and design components, are the inherent characteristics of
Savio Group, which invests 4 million every, 3,5 times more if compared to the average in the sector.
Thesan S.p.A.
Thesan S.p.A. was founded in 2008 with the mission of designing, realising and offering highly innovative
and technological solutions in the fi eld of renewable energy and green building.
Thesan’s activity is carried out through two business units:
Renewable energy
Energy saving
Thesan’s development originates from an idea of Savio’s Group, founded in 1889 and worldwide leader
for aluminium frames components, basing its success upon the quality of products and the innovative
technical, aesthetical and functional contents.
5Thesan around the world
Strength of Savio’s network:
Chiusa San Michele (TO)headquarter
and production factory
Sant’Antonino di Susa (TO)production factory
Avigliana (TO)production factory
Thesan operates worldwide thanks to its direct presence in many high potential countries and to the
synergies deriving from Savio’s international network.
Thesan around the world.
Headquarter and main factories.
6
Renewable Energy is Thesan’s division dedicated to business development in the renewable
Energy Field.
Renewable Energy Division
Renewable Energy Division.
Value ProjectsThesan operates worldwide in the development and realisation of power plants for the production
of renewable energy. The activity mainly focuses on the realisation of photovoltaic and hydroelectric
power plants in those markets offering high returns on investments, even without significant incentive
systems.
Thesan has the adequate competences to follow all the phases of the production chain, from
the project development to the construction, management and maintenance of the power plant.
The production chain activities can be summarized as follows:
1) Project Development
Drawing on its expertise in the design of steel and aluminum structures, acquired during the 125
years of activity of Savio Group and thanks to a team of over 40 engineers, Thesan is able to
satisfy any requirement for the construction of photovoltaic power plants at any altitude and with
any specific fixing requirements.
2) Construction
In addition to offering support and advice in the assembly of its structures, the design of which also
takes into account an optimization of the construction and maintenance costs, Thesan also offers Turn
Key EPC (Engineering, Procurement and Construction) services.
G R E E N F I E L D B R O W N F I E L D
PROJECT DEVELOPMENT CONSTRUCTION OPERATION
Rights acquisition
Engineering
Permitting
EPC
Equity financing
Construction Debt Financing
Long term financing
O&M contracting
Asset Management
7
Both for its investments, that allow Thesan to increase its portfolio of green energy production, and
for its activities as General Contractor as Turn Key EPC, Thesan takes upon itself the development,
operational and financial risk linked to the realisation of the projects.
For a part of its investments, there is the aim of ceasing the project within 12-18 months to investors
that are not willing to take upon themselves the risks of development and construction.
3) Operation
Thesan’s investments are financed through leasing contracts or medium/long-term project finance.
Thesan can create added value in the operation phase thanks to the daily management of the asset
and to the choice of O&M contractor leader in the sector.
Renewable Energy Division
8 Renewable Energy Division
Serra dei Conti (AN)
2 PV Plants:
0,912 MWp
0,670 MWp
Ripatransone (AP)
1 PV Plant: 0,991 MWp
Amatrice (RI)
1 PV Plant: 0,668 MWp
Redea
4 PV Plants: 3,99 MWp
Montedinove (AP)
3 PV Plants:
0,991 MWp
0,974 MWp
0,867 MWp
Bucsani:
1 PV Plant: 1,99 MWp
Produlesti
1 PV Plant: 2,49 MWp
Main investments in Italy.
Romania.
Investments in 2012
and in 2013
9
Fortaleza
1 PV Plant:
20,00 MWp
Salvador de Bahia
1 PV Plant:
1,00 MWp
Renewable Energy Division
Brazil.
Completed projects
Ongoing projects
Ongoing projects in 2014
Çumra
2 PV Plants:
2,00 MWp
Turkey.
11Thesan Mounting System
A full range of mounting systems, standing out for
the use of excellent materials, for the refined design,
for the complete compatibility between components
and above all for the incomparable easy application.
TMS helps you to save time.Time to dedicate to new energies.
Design, production and distribution of complete
mounting systems for the realization of retail and
industrial power plants.
Thanks to its know-how, acquired in 125 years of
experience, Savio has transmitted to Thesan the
necessary competences to excel in the design and
production of complete mounting systems both from
qualitative and technical point of view.
Having a network of sales agents and distributors all
over Europe, South America, India and China, Thesan’s
mounting systems are characterized by quality and
reliability developed thanks to the entirely Italian design
and technology.
Thesan is in charge of the installation of its mounting
systems for the realization of industrial photovoltaic
power plants.
12
Around You is a full range of aluminium and steel mounting
systems that combines Savio’s Know-how to Thesan’s
design expertise.
Innovative solutions.
In addition to the solutions proposed in the
catalogue, Thesan offers a range of completely
customized products and systems to suit every
need of its customers.
Customization.
An easy and intuitive calculation software,
especially designed to allow our clients to size
photovoltaic power plants on all types
of roofs, optimizing the work.
Mounting Systemconfigurator.
The two key levers to improve
the quality of products.
TMS constantly evolving.
Research and development.
Innovation, quality, warranty and certifi cates
Snow load areaskN/m
1,51,00,6
13
High standards of quality for every single component.
The attention paid to every single detail ensures not only an
incomparable constructive ease and speed of assembly,
but also the maximum safety in every phase
of assembly and maintenance.
We use high-quality materials as aluminium EN-AW-6063,
stainless steels and reinforced technopolymers with fi berglass
to guarantee a long lasting mounting system.
The well-established quality of our systems
and of our simple and easy to use materials
offers confidence and reliability to our clients.
For this reason, we grant a 12-year warranty
for all our products against any manufacturing
or material defects.
Warranty.
Quality, ease and speed
in assembly.
Innovation, quality, warranty and certifi cates
ISO 9001 and 14001 compliance certifi cate.
TÜV Rheinland AG has certified Thesan on the
basis of the criteria established by ISO 9001:2008
compliance certifi cate, regarding development,
production and sale of assembly systems for solar
technology.
Pending
TÜV compliance certifi cate.
The group TÜV Rheinland is in charge of controlling
a standard range of products on the basis of
adequate criteria.
Savio’s certificate
Compliance certificates.
57%
Assembly times
reduced by
ti
14 Structural controls
Through certifi ed FEM codes (NASTRAN/Optistruct®) Thesan performs structural controls and projects,
both linear and non-linear in compliance with the Eurocodes and in compliance with the regulations of
the country where the plant is mounted.
In particular:
- EN1990 – Eurocode - Basis of structural design
- EN1991 – Actions on structures
- EN1993-1-1 – Design of steel structures - General rules and rules for buildings
- EN1993-1-3 – Design of steel structures - Supplementary rules for cold-formed members and sheeting
- EN1993-1-8 – Design of steel structures - Design of joints
- EN1999-1-1 – Design of aluminium structures - General structural rules
Structural controls.
15Structural controls
Double pole stress–strain analysis through FEM method
Single pole stress–strain analysis through FEM method
19
“Triangle” SystemFeatures:
Triangles with different tilt angles in order to guarantee the best solution in any condition
Suitability:
Flat surfaces, such as roofs and terraces, with any type of roof coverage (bituminous sheets, gravel, cement or metal sheet).Adjustable for facades and sunscreens.
“Azimuth 0” SystemFeatures:
Modularity and minimization of the components for a fast and easy assembly
Suitable for a low lift roof, thanks to the minimal weight
of ballasts
Maximum height less than 30 cm for fixing on roofs with or without parapet
Windbreak spoiler to optimize aerodynamics and reduce ballasts
Suitability:
Flat surfaces, such as roofs and terraces, with any type of roof coverage (bituminous sheets, gravel, cement or metal sheet).
“East-West” SystemFeatures:
Modularity and minimization of the components for a fast and easy assembly
suitable for a low lift roof, thanks to the minimal weight of ballasts
Maximum height less than 30 cm for fixing on roofs with or without parapet
Suitability:
Flat surfaces, such as roofs and terraces, with any type of roof coverage (bituminous sheets, gravel, cement or metal sheet).
Flat roof solutions
Flat roof Solutions
20 Flat roofing accessories
Flat roofing accessories
10° central supportfor Azimuth 0 system Material: 6060 aluminium alloy, or equivalent
ITEMSO-AY055-00TH
DESCRIPTIONAZ0 central support
Central supportfor East-West system Material: 6060 aluminium alloy, or equivalent
ITEMSO-AY056-00TH
DESCRIPTIONEO central support
Windbreakfor Azimuth 0 system Material: galvanized steel
ITEMSO-AY058-00TH
DESCRIPTIONAZ0 windbreak
Middle clamp, rough, for East-West system Material: 6060 aluminium alloy, or equivalent
35-38 mm frame modules - M8x30 hammer head screws39-44 mm frame modules - M8x36 hammer head screws45-50 mm frame modules - M8x42 hammer head screws
ITEMSO-AY059-00TH
DESCRIPTIONEO middle clamp
21Flat roofing accessories
Triangle Material: 6060 aluminium alloy, or equivalent
Customized triangles realized according to the specific project
10° terminal support,for Azimuth 0 and East-West systems Material: 6060 aluminium alloy, or equivalent
ITEMSO-AYP09L015-0000SO-AYP09L048-0000SO-AYP09L090-0000
DESCRIPTIONLenght 150 mmLenght 475 mmLenght 900 mm
Support stand for middle clamp, roughfor East-West support Material: 6060 aluminium alloy, or equivalent
ITEMSO-AY060-00TH
DESCRIPTIONEO middle clamp support
22 Sloped roofs solutions
Sloped roof solution
“Universal” system with brackets,for tiles and Roman tilesFeatures:
Full range of fixing brackets suitable with any kind of tile or Roman tile
Suitability:
Sloped roofs with tiles, Roman tiles, slate and any kind of roof coverage.
“Universal” system with double threaded screwsFeatures:
any kind of roof structure (iron, steel, concrete)
use of electric screwdriver quick assembly of screws
Water penetration resistance warranty thanks to the EPDM seal included in the screws
Suitability:
Sloped roofs with different roof coverage (corrugated sheet, fi ber cement sheets, cement tiles, bituminous sheets).
“Universal” System with anchoring base, for corrugated sheet metal roofFeatures:
the power plant reaches its end-of-life, keeping the waterproofing shingle
60% less roof holes for anchoring the structures, compared to our main competitors
Higher mechanical resistance thanks to use of structural tape
Suitability:
Sloped roofs with corrugated sheet metal roof coverage.
23Sloped roofs solutions
“Universal Light” System with anchoring baseFeatures:
when the power plant reaches its end-of-life, keeping the waterproofing shingle
Higher mechanical resistance thanks to use of structural tape
Quick assembly thanks to the use of fixing plates to be fixed on the rail side
Suitability:
Sloped roofs with corrugated sheet metal roof coverage.
“Plan” System with structural tape for corrugated sheet roofsFeatures:
the structures, compared to our main competitors
Higher mechanical resistance thanks to use of structural tape
Suitability:
Sloped roofs with corrugated sheet metal roof coverage.
Little Plan” with EPDM tape for corrugated sheet roofsFeatures:
and practical
Suitability:
Sloped roofs with corrugated sheet metal roof coverage.
24 Mounting rails for sloped roofs
Mounting rails for sloped roofs
Universal rail Material: 6063 aluminium alloy, or equivalent
Rail height: 40 mm – Rail width: 40 mm Weight: 0,97 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M8 in the lower groove
ITEMSO-AYP12L3-0000SO-AYP12L6-0000
DESCRIPTIONUniversal rail of 3,10 mUniversal rail of 6,20 m
Universal Medium rail Material: 6063 aluminium alloy, or equivalent
Rail height: 23 mm – Rail width: 34 mm Weight: 0,607 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M8 in the lower groove
ITEMSO-AYP11L6-0000
DESCRIPTIONUniversal Medium rail of 6,20 m
Universal Light rail Material: 6063 aluminium alloy, or equivalent
Rail height: 17 mm – Rail width: 40 mm Weight: 0,61 Kg/m
Use hammer head screws M8 in the upper groove
High rail Material: 6063 aluminium alloy, or equivalent
Rail height: 55 mm – Rail width: 26 mm Weight: 0,811 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M8 in the lower groove
ITEMSO-AYP13L3-0000SO-AYP13L6-0000
ITEMSO-AYP17L3-0000SO-AYP17L6-0000
DESCRIPTIONUniversal Light rail of 3,10 mUniversal Light rail of 6,20 m
DESCRIPTIONHigh rail of 3,10 mHigh rail of 6,20 m
25Mounting rails for sloped roofs
Plan rail Material: 6063 aluminium alloy, or equivalent
Rail height: 22,5 mm – Rail width: 88 mm Weight: 1,00Kg/m
To be used for corrugated sheet roofs, fixing with screws or rivetsUse hammer head screws M8 in the upper groove
ITEMSO-AYP14L3-0000SO-AYP14L6-0000
DESCRIPTIONPlan rail of 3,10mPlan rail of 6,20m
Little Plan Light ral Material: 6063 aluminium alloy, or equivalent
Rail height: 12,5 mm – Rail width: 55 mm
Weight: 0,48 Kg/m.
To be used for corrugated sheet roofs, fixing with screws or rivetsUse hammer head screws M8 in the upper groove
ITEMSO-AYP10L040-0000
DESCRIPTIONLittle Plan Light rail of 0,40 m
Little Plan rail Material: 6063 aluminium alloy, or equivalent
Rail height: 22,5 mm – Rail width: 88 mm Weight: 1,00Kg/m
To be used for corrugated sheet roofs, fixing with screws or rivetsUse hammer head screws M8 in the upper groove
ITEMSO-AYP14L05-0000
DESCRIPTIONLittle Plan rail of 0,50 m
26 Junctions for sloped roofs
Junctions for sloped roofs
Internal junction for Universal rail Material: 6060 aluminium alloy, or equivalent
Lenght: 200 mm
ITEMSO-AY003-0000
DESCRIPTIONUniversal internal junction
Internal junction for Plan rail Material: 6060 aluminium alloy, or equivalent
Lenght: 200 mm
ITEMSO-AY011-0000
DESCRIPTIONPlan internal junction
External junction for Universal rail Material: 6060 aluminium alloy, or equivalent
Lenght: 200 mm, stainless steel screws included (Allen head screws M8x16, flat washers and nuts M8)
ITEMSO-AY004-0000
DESCRIPTIONUniversal external junction
Internal junction for Universal Medium rail Material: 6060 aluminium alloy, or equivalent
Lenght: 200 mm
ITEMSO-AY088-00TH
DESCRIPTIONUniversal Medium internal junction
28 Mounting rails for custom applications
Mounting rails for custom applications
Strong rail Material: 6063 aluminium alloy, or equivalent
To be used for custom applications
Rail height: 90 mm – Rail width: 60 mm Weight: 3,00 Kg/m
se hammer head screws M8 in the upper grooveUse allen head screws M10 in the lower groove
ITEMSO-AYP16L6-0000
DESCRIPTIONStrong rail of 6,20 m
Medium rail Material: 6063 aluminium alloy, or equivalent
To be used for custom applications
Rail height: 62 mm – Rail width: 43 mm Weight: 2,00 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M10 in the lower groove
ITEMSO-AYP15L6-0000
DESCRIPTIONMedium rail of 6,20 m
29Junctions for custom applications
Internal junction for Strong rail Material: 6060 aluminium alloy, or equivalent
Lenght: 387 mm
ITEMSO-AY014-0000
DESCRIPTIONStrong internal junction
Internal junction for Medium rail Material: 6060 aluminium alloy, or equivalent
Lenght: 387 mm
ITEMSO-AY013-0000
DESCRIPTIONMedium internal junction
External junction for Medium rail Material: 6060 aluminium alloy, or equivalent
Lenght: 200 mm, stainless steel screws included (Allen head screws M10x16, flat washers and nuts M10)
ITEMSO-AY016-0000
DESCRIPTIONMedium external junction
External junction for Strong rail Material: 6060 aluminium alloy, or equivalent
Lenght: 200 mm, stainless steel screws included (Allen head screws M10x16, flat washers and nuts M10)
ITEMSO-AY017-0000
DESCRIPTIONStrong external junction
Junctions for custom applications
30 Brackets for sloped roofs
Brackets for sloped roof
Bracket for standard tiles, fixed Material: AISI430
Minimum height 49 mm Total height 134 mm
ITEMSO-AY027-0000
DESCRIPTIONBracket for standard tiles, fixed
Bracket for tiles, with 1 adjustment Material: AISI430
Adjustment A height from 59 to 92 mm Total height from 110 to 143 mm
ITEMSO-AY028-0000
DESCRIPTIONBracket for tiles, 1 adjustment
Bracket for tiles, with 2 adjustmentsMaterial: AISI430
Adjustment A height from 70 to 90 mm Adjustment B height from 52 to 66 mm Total height from 125 to 160 mm
ITEMSO-AY029-0000
DESCRIPTIONBracket for tiles, 2 adjustments
Bracket for tiles, with 3 adjustments Material: AISI430
Adjustment A height from 82 to 106 mm Adjustment B height from 53 to 66 mm Adjustment C height from 81 to 151 mm Total height from 139 to 183 mm
ITEMSO-AY050-0000
DESCRIPTIONBracket for tiles, 3 adjustments
A
A
B
A
B
C
31Brackets for sloped roofs
Bracket for Portuguese tiles, fixed Material: AISI430
Minimum height 30 mm Total height 135 mm
ITEMSO-AY030-0000
DESCRIPTIONBracket for Portuguese tiles, fixed
Bracket for slate slabs, fixed Material: AISI430
Total height 72 mm
ITEMSO-AY033-0000
DESCRIPTIONBracket for slate slabs, fixed
Bracket for flat tiles, fixed Material: AISI430
Minimum height 33 mm Total height 122 mm
ITEMSO-AY034-0000
DESCRIPTIONBracket fot flat tiles,fixed
Bracket with hole for tiles, fixed Material: AISI430
Minimum height 47 mm Maximum height 132 mm
ITEMSO-AY041-0000
DESCRIPTIONBracket with hole for tiles, fixed
32 Brackets for sloped roofs
Brackets for sloped roof
Bracket for Roman tiles, 1 adjustment Material: AISI430
Adjustment B height from 108 to 140 mm Total height from 143 to 176 mm
ITEMSO-AY042-0000
DESCRIPTIONBracket for Roman tiles, 1 adj
B
Clamp for standing seam metal roofs Material: AISI430
ITEMSO-AY035-0000
DESCRIPTIONStanding seam metal roofs
Bracket for Roman tiles, 1 adjustment for horizontal purlins Material: AISI430
Adjustment B height from 103 to 133 mm Total height from 187 to 218 mm
ITEMSO-AY031-0000
DESCRIPTIONBracket for Roman tiles, 1 adj, horiz
B
Bracket for Roman tiles, 1 adjustment for vertical purlins Material: AISI430
Adjustment B height from 94 to 126 mm Total height from 179 to 211 mm
ITEMSO-AY032-0000
DESCRIPTIONBracket for Roman tiles, 1 adj, vert
B
33
Fixing screws for sloped roofs
Fixing screws for sloped roofs
Double-threaded fi xing screws,for wood or concrete substructureSuitable for corrugated sheet, fiber cement sheet, fiber cement tile
Adjustment plate 82x40x5 mm included.
Seal included.
ITEMSOST-S202-00THSOST-S201-00THSOST-S205-00THSOST-S208-00THSOST-S206-00THSOST-S203-00THSOST-S207-00THSOST-S204-00TH
DESCRIPTIONM10 x 180M10 x 200M10 x 250M12 x 200M12 x 250M12 x 300M12 x 350M12 x 400
L180
200
250
200
250
300
350
400
LM85
85
85
100
100
150
195
220
LH67
67
67
80
100
100
100
100
SWSW7
SW7
SW7
SW9
SW9
SW9
SW9
SW9
Double-threaded fi xing screws, for metal substructureSuitable for corrugated sheet, fi ber cement sheet, fi ber cement tile,
cement tiles roofs.
Seal included.
ITEMSOST-S211-00THSOST-S210-00THSOST-S209-00TH
DESCRIPTIONdiameter 8diameter 8diameter 8
L80
125
160
LM50
50
50
LH136
181
216
SWSW5
SW5
SW5
ITEMSOST-C201-00TH SOST-C201-00SPSOST-C202-00SP
DESCRIPTIONPlate 80x30x5 - hole 11 mm, slot 11 mmPlate 82x40x5 - hole 11 mm, slot 11 mmPlate 82x40x5 - hole 13 mm, slot 11 mm
Adjustment plate Material: steel
To be fi xed with double-threaded fi xing screws
34 Accessories for sloped roofs
Locking bracket for Universal rail
Material: 6060 Aluminium alloy
To be used in combination with Univeral rail
Width : 20 mmLenght: 45 mmWith slot of 8,5 mm
ITEMSO-AY036-0000
DESCRIPTIONLocking bracket 20 Universal
Locking bracket for Universal Light rail
Material: 6060 Aluminium alloy To be used in combination with Univeral Light rail
Width: 20 mmLenght: 45 mmWith slot of 6,5 mm
ITEMSO-AY036-0001
DESCRIPTIONLocking bracket 20 Universal Light
ITEMSO-AY007-0000
DESCRIPTIONLocking bracket 50 Medium/Strong
Locking bracket for Medium and Strong rail
Material: 6060 Aluminium alloy To be used in combination with Medium and Strong rail
Width: 50 mmLenght: 46,5 mmWith slot of 8,5 mm
Locking bracket for Universal rail
Material: 6060 Aluminium alloy
To be used in combination with Univeral rail
Width: 50 mmLenght: 45 mmWith slot of 8,5 mm
ITEMSO-AY006-0000
DESCRIPTIONLocking bracket 50 Universal
Accessories for sloped roofs
35Accessories for sloped roofs
ITEMSO-AY012-0000
DESCRIPTIONAnchoring base set
Pre-assembled anchoring base set
Material: 6060 Aluminium alloy To be used in combination with Univeral rail on corrugated sheet
Width: 25 mm, Lenght: 120 mm
To be fixed using self-drilling screws with seal
Locking bracket SO-AY036-0000, M6x16 allen screw, nut and adhesive and structural tape included
Anchoring base
Material: 6060 Aluminium alloy To be used in combination with Univeral rail on corrugated sheet
Width: 25 mm, Lenght: 120 mm
To be fixed using self-drilling screws with seal
M6x16 allen screw and adhesive and structural tape included
ITEMSO-AY022-0000
DESCRIPTIONAnchoring base
39
Ground system solutions
Ground system solutions
Single Pole support system,
array 1x6
Single Pole support system,
array 3x4
Features:
Adjustable tilt angle, available upon request, to meet all requirements
Assembly of any type of module with or without frame
ADJUSTABLE
ADJUSTABLE
ADJUSTABLE
Single Pole support system,
array 2x6
40
Ground system solutions
Double Pole support system,
array 2x6
Double Pole support system,
array 3x6
Ground system solutions
Features:
Configurable modularity, on request, to meet all requirements
Assembly of any type of module with or without frame
41
Double Pole support system,
array 3x4
Double Pole support system,
array 4x4
Ground system solutions
42 Support for ground system solutions
Supports for ground system solutions
Single Pole Material: S355 hot dip galvanized or equivalent
Single Pole with Ω rails to be fi xed in the ground, upper current top,cap, strut and hot dip galvanized steel screws included
Adjustable tilt angle in 3 or more positions
The dimensions of the pole are defi ned according to the specifi c project to be realized.
Double Pole Material: S355 hot dip galvanized or equivalent
Double Pole with Ω rails to be fi xed in the ground, upper current top, cap, strut and hot dip galvanized steel screws included
Fixed tilt angle
The dimensions of the pole are defi ned according to the specifi c project to be realized.
44 Mounting rails for ground system solutions
Mounting rails for ground system solutions
Open LandFor portrait modules assembly
Material: 6063 aluminium alloy, or equivalent
Height: 105 mm - Width: 63 mm - Weight: 1,75 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M10 in the lower groove
ITEMSOST-P358Lxxx-00THSOST-P362Lxxx-00TH
DESCRIPTIONOpen Land - customized lenghtOpen Land V01 - customized lenght
Open LandFor both portrait or landscape modules assembly
Material: 6063 aluminium alloy, or equivalent
Height: 105 mm - Width: 63 mm - Weight: 1,83 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M10 in the lower groove
ITEMSOST-P361Lxxx-00TH
DESCRIPTIONOpen Land V02 - customized lenght
Internal junctionfor Open Land rails V01, V02, V03 Material: 6063 aluminium alloy, or equivalent
Lenght: 400 mm
ITEMSOST-ST033-00TH
DESCRIPTIONInternal junction Open Land V01, V02, V03
Open Land StrongFor both portrait or landscape modules assembly
Material: 6063 aluminium alloy, or equivalent
Height: 107 mm - Width: 65 mm - Weight: 2,20 Kg/m
Use hammer head screws M8 in the upper grooveUse allen head screws M10 in the lower groove
ITEMSOST-P367Lxxx-00TH
DESCRIPTIONOpen Land V03 - customized lenght
46
Photovoltaic shelter solutions
ShelterFeatures:
Fix tilt angle, on request, to meet all requirements
Assembly of any type of module with or without frame
Photovoltaic shelter solutions
48 Fixing clamps for modules with frame
Middle fixing clamp, rough Material: Aluminium, alloy 6060 or equivalent
Modules with frame from 35 to 38 mm - Hammer head screw M8x30Modules with frame from 39 to 44 mm - Hammer head screw M8x36Modules with frame from 45 to 50 mm - Hammer head screw M8x42
Clamp width 25 mm
ITEMSO-AY025-0000
DESCRIPTIONMiddle clamp, rough
Middle fixing clamp, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Modules with frame from 35 to 38 mm - Hammer head screw M8x30Modules with frame from 39 to 44 mm - Hammer head screw M8x36Modules with frame from 45 to 50 mm - Hammer head screw M8x42
Clamp width 25 mm
ITEMSO-AY025-1300
DESCRIPTIONMiddle clamp, black
Final fixing clamp, rough Material: Aluminium, alloy 6060 or equivalent
To be used in combination with hammer head screw M8x36
Clamp width 25 mm
ITEMSO-AY026-0000SO-AY026-0001SO-AY026-0002SO-AY026-0003SO-AY026-0004SO-AY026-0005
DESCRIPTIONFinal clamp, rough, module h35mmFinal clamp, rough, module h38mmFinal clamp, rough, module h40mmFinal clamp, rough, module h42mmFinal clamp, rough, module h46mmFinal clamp, rough, module h50mm
Fixing clampsfor modules with frame
Final fixing clamp, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
To be used in combination with hammer head screw M8x36Clamp width 25 mm
ITEMSO-AY026-1300SO-AY026-1301SO-AY026-1302SO-AY026-1303SO-AY026-1304SO-AY026-1305
DESCRIPTIONFinal clamp, black, module h35mmFinal clamp, black, module h38mmFinal clamp, black, module h40mmFinal clamp, black, module h42mmFinal clamp, black, module h46mmFinal clamp, black, module h50mm
49Pre-assembled fixing clamps for modules with frame
Middle fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring and nut included
With anti-theft washer:
ITEMSO-AY048-0000SO-AY048-0001SO-AY048-0002
SO-AY063-0000SO-AY065-0000
DESCRIPTIONMiddle clamp rough module h35-38mmMiddle clamp rough module h39-44mmMiddle clamp rough module h45-50mm
Middle clamp rough module h35-38mmMiddle clamp rough module h40-42mm
Middle fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring and nut included
ITEMSO-AY048-1300SO-AY048-1301SO-AY048-1302
DESCRIPTIONMiddle clamp, black,module h35-38mmMiddle clamp, black,module h39-44mmMiddle clamp, black,module h45-50mm
Final fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring and nut included
ITEMSO-AY049-1300SO-AY049-1301SO-AY049-1302SO-AY049-1303SO-AY049-1304SO-AY049-1305
With anti-theft washer:SO-AY064-0000SO-AY066-0000
Final clamp, rough, module h35mmFinal clamp, rough, module h40mm
ITEMSO-AY049-0000SO-AY049-0001SO-AY049-0002SO-AY049-0003SO-AY049-0004SO-AY049-0005
DESCRIPTIONFinal clamp, rough, module h35mmFinal clamp, rough, module h38mmFinal clamp, rough, module h40mmFinal clamp, rough, module h42mmFinal clamp, rough, module h46mmFinal clamp, rough, module h50mm
DESCRIPTIONFinal clamp, rough, module h35mmFinal clamp, rough, module h38mmFinal clamp, rough, module h40mmFinal clamp, rough, module h42mmFinal clamp, rough, module h46mmFinal clamp, rough, module h50mm
Final fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring and nut included
Clamp width 25 mm
Clamp width 25 mm
Clamp width 25 mm
Clamp width 25 mm
Pre-assembled fixing clampsfor modules with frame
50 Pre-assembled fixing clamps for modules without frame
Middle fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mmLenght 200 mm
ITEMSO-AY001-0003
DESCRIPTIONMiddle clamp, rough, 7-11 L200
Middle fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mmLenght 200 mm
ITEMSO-AY001-1303
DESCRIPTIONMiddle clamp, black, 7-11 L200
Final fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mmLenght 200 mm
ITEMSO-AY002-0003
ITEMSO-AY002-1303
DESCRIPTIONFinal clamp, rough, 7-11 L200
DESCRIPTIONFinal clamp, black, 7-11 L200
Final fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mmLenght 200 mm
Pre-assembled fixing clampsfor modules without frame
Range of Clamps range certified by:
51Pre-assembled fixing clamps for modules without frame
Middle fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 6,5 to 11 mmOverlay 15 mm
ITEMSO-AY001-0002
DESCRIPTIONMiddle clamp, rough, 6,5-11
Middle fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 6,5 to 11 mmOverlay 15 mm
ITEMSO-AY001-1302
DESCRIPTIONMiddle clamp, black, 6,5-11
Final fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 6,5 to 11 mmOverlay 15 mm
ITEMSO-AY002-0002
ITEMSO-AY002-1302
DESCRIPTIONFinal clamp, rough, 6,5-11
DESCRIPTIONFinal clamp, black, 6,5-11
Final fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 6,5 to 11 mmOverlay 15 mm
Range of Clamps range certified by:
52 Pre-assembled fixing clamps for modules without frame
Middle fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mm
ITEMSO-AY001-0001
DESCRIPTIONMiddle clamp, rough, 7-11
Middle fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mm
ITEMSO-AY001-1301
DESCRIPTIONFinal clamp, black, 7-11
Final fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mm
ITEMSO-AY002-0001
ITEMSO-AY002-1301
DESCRIPTIONMiddle clamp, rough, 7-11
DESCRIPTIONFinal clamp, black, 7-11
Final fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 7 to 11 mmOverlay 12 mm
Pre-assembled fixing clampsfor modules without frame
Range of Clamps range certified by:
53Pre-assembled fixing clamps for modules without frame
Middle fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 7,5 to 12 mmOverlay 12 mm
ITEMSO-AY001-0000
DESCRIPTIONMiddle clamp, rough, 7,5-12
Middle fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 7,5 to 12 mmOverlay 12 mm
ITEMSO-AY001-1300
DESCRIPTIONFinal clamp, black, 7,5-12
Final fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent
Hammer head screw, spring, nut and seals included
Locking thickness from 7,5 to 12 mmOverlay 12 mm
ITEMSO-AY002-0000
ITEMSO-AY002-1300
DESCRIPTIONMiddle clamp, rough, 7,5-12
DESCRIPTIONFinal clamp, black, 7,5-12
Final fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized
Hammer head screw, spring, nut and seals included
Locking thickness from 7,5 to 12 mmOverlay 12 mm
54 Accessories
Anti-theft washer Material: Stainless steel
ITEMSO-AY046-0000
DESCRIPTIONAnti-theft washer
ITEMSO-AY087-00TH
DESCRIPTIONSliding anchor
Sliding anchorfor hammer head screw, M8 and M10 Material: polypropylene plastic
It keeps the hammer head screw in place, facilitating the assembly
Accessories
Safety hook Material: Reinforced Technopolymer, black color
To be used in combination with modules without frame
ITEMSO-AY005-8500
DESCRIPTIONSafety hook
Rubber support Material: EPDM, black color
To be used in combination with modules without frame
Width : 40 mm Lenght: 40 mm
ITEMSO-AY015-8500
DESCRIPTIONRubber support
55Plugs
Plug for Universal rail Material: plastic PA6, grey color
ITEMSO-AY010-8300
DESCRIPTIONPlug for Universal
Plug for Medium rail Material: plastic PA6, grey color
ITEMSO-AY023-8300
DESCRIPTIONPlug for Medium
Plug for Strong rail Material: plastic PA6, grey color
ITEMSO-AY024-8300
ITEMSO-AY051-83TH
DESCRIPTIONPlug for Strong
DESCRIPTIONPlug for Open Land
Plug for Open Land rail Material: plastic PA6, grey color
Plugs
56 Cable locks and cable lock ducts
Cable lock for Universal rail Material: plastic PA6, grey color
Width : 30 mm
ITEMSO-AY009-8300
DESCRIPTIONCable lock for Universal
Cable lock with rings for Universal railMaterial: plastic PA6, grey color
With ringsWidth: 30 mm
ITEMSO-AY040-8300
DESCRIPTIONCable lock rings for Universal
Cable lock duct for Medium railMaterial: plastic PVC, grey color
Lenght: 3 m
ITEMSO-AY037-8300
ITEMSO-AY038-8300
DESCRIPTIONCable lock duct 3m for Medium
DESCRIPTIONCable lock duct 3m for Strong
Cable lock duct for Strong railMaterial: plastic PVC, grey color
Lenght: 3 m
Cable locks and cable lock ducts
57Screws and accessories
Hammer head screw M8, full thread Material: stainless steel
ITEMSOST-V209-00THSOST-V206-00THSOST-V210-00TH
DESCRIPTION
Hammer head screw M8x30Hammer head screw M8x36Hammer head screw M8x42
Allen head srew, full threadAllen head screw DIN933
Material: stainless steel
ITEM0042-68315-00000042-68320-00000042-68325-00000042-68330-00000042-68502-0000
DESCRIPTION
Allen head screw M8x20Allen head screw M8x25Allen head screw M8x30Allen head screw M8x35Allen head screw M10x25
Allen head srew, partial threadAllen head screw DIN931
Material: galvanized steel
ITEM0041-69900-61000041-69904-6100
DESCRIPTIONAllen head screw M14x80Allen head screw M14x90
Screws and accessories
Self-drilling screw for woodSelf-drilling wood screw
Material: stainless steel A2, partial thread
Flat-head (Topix) and Hexalobular socket (Torx)
ITEM0042-90400-00000042-90401-00000042-90530-00000042-90540-00000042-90550-00000042-90560-00000042-90580-0000
DESCRIPTIONWood screw dia. 6x60Wood screw dia. 6x80Wood screw dia. 8x60Wood screw dia. 8x80Wood screw dia. 8x100Wood screw dia. 8x120Wood screw dia. 8x160
L60806080100120160
B36425072808080
dk15151919191919
TXTX25TX25TX40TX40TX40TX40TX40
58 Screws and accessories
Nut with safety fitNut with safety fit DIN6923
Material: stainless steel
ITEM0042-80500-00000042-80700-0000
DESCRIPTIONNut with safety fit M8Nut with safety fit M10
Self-locking nutSelf-locking nut, UNI-7473-DIN982
ITEM0042-78702-00000041-78900-6100
DESCRIPTIONLocking nut M10, stainless steelLocking nut M14, galvanized steel
Self-locking nut with safety fit
Self-locking nut with safety fit, DIN6926
Material: stainless steel
ITEM0042-82500-00000042-82600-0000
DESCRIPTIONLocking nut with safety fit M8Locking nut with safety fit M10
Screws and accessories
ITEM0042-76500-0000
DESCRIPTIONStandard nut M8
Standard nutStandard nut DIN934
Material: stainless steel
59Screws and accessories
WasherWasher for allen head screw UNI6592
Material: galvanized steel
For M14 - internal diameter 15 mm, external diameter 28 mm
ITEM0041-91900-6100
DESCRIPTIONWasher M14
Toothed washerExternal tooth washers for allen head screw UNI8842A
Material: galvanized steel
For M14 - internal diameter 14,5 mm, external diameter 24 mm
ITEM0041-93900-6100
DESCRIPTIONToothed washer M14
ITEMSOST-V228-00SPSOST-V229-00SPSOST-V230-00SP
DESCRIPTIONWatertight rivet diam. 4,8x10Watertight rivet diam. 4,8x16Watertight rivet diam. 6,4x20
Watertight rivetWatertight rivet
Material: stainless steel A2
ITEM0042-91502-00000042-91501-0000
DESCRIPTIONLarge washer M8Large washer M10
Large washerLarge washer UNI6593
Material: stainless steel
For M8 – internal diameter 8,4 mm, external diameter 24 mm
For M10 – internal diameter 10,5 mm, external diameter 30 mm
60 Screws and accessories
Self-drilling screw with sealSelf-drilling screw with seal
Material: stainless steel A2
Allen head SW8
ITEM0042-31400-00000042-31401-0000
DESCRIPTIONSelf-drilling screw with seal 5,5x25Self-drilling screw with seal 5,5x35
ITEM0042-31305-0000
DESCRIPTIONSelf-drilling screw diam. 5,5x19
Self-drilling screwSelf-drilling screw with seal
Material: stainless steel A2
Allen head SW8 with collar, DIN7504-K
Concrete anchorConcrete anchor
ITEMSOST-V208-00EJ
DESCRIPTIONAnchor 10x50
Screws and accessories
Concrete anchorConcrete anchor
Material: stainless steel A4
ITEMSOST-V231-00SPSOST-V232-00SPSOST-V233-00SPSOST-V234-00SP
DESCRIPTIONAnchor 8x75 - Thread 30 mmAnchor 10x105 - Thread 55 mmAnchor 10x155 - Thread 85 mmAnchor 12x170 - Thread 85 mm
61Screws and accessories
EPDM tapeEPDM tape, 3M brand
Width: 30 mmThickness: 3 mmRoll: 30 m
ITEMSOST-V502-003M
DESCRIPTIONEPDM Tape, 30 m roll
Neoprene protective tapeNeoprene protective tape
Width: 120 mmThickness: 5 mmRoll: 20 m
ITEMSOST-V501-00PR
DESCRIPTIONNeoprene Tape, 20 m roll
Adhesive and structural VHB tapeAdhesive and structural VHB tape, 3M brand
Width: 25 mmRoll: 33 m
ITEMSOST-V501-003M
DESCRIPTIONVHB structural tape, 33 m roll
62 Muse by Renzo Piano
The new ‘Science Museum’ in Trento is powered by special photovoltaic modules designed
by Thesan.
Thesan has a central role in the realisation of this eco-museum: Thesan’s photovoltaic
solutions, created ad hoc for this project, have been chosen in order to supply green and
renewable energy to the museum.
This is an important challenge for a project in which the prestige of a unique location and the spirit
of innovation, required by the particular situation, are merged.This is exactly the spirit characterizing
Thesan’s daily work, aiming at offering constantly new ideas, projects and solutions within the
photovoltaic sector.
Thesan’s sun shines on MUSE by Renzo Piano.
WE ARE TALKING ABOUT THE MUSE, THE SCIENCE MUSEUM
BY RENZO PIANO, WHICH OPENED IN JUNE 2013.
Not only is the museum one of the most important European Centres for the scientific and
environmental culture, but it is also an authentic model of green building, designed to respect
the environment and exploit renewable energies.
65Hemera
HEMERA
The innovative complete system of insulated
photovoltaic roofing for Roman tile roofs.
Fully merging with the landscape.
Hemera is ideal both for new houses and for renovations
and conservation, above all in historical city centres.
66
HEMERA
Hemera
Hemera is the complete system of insulated photovoltaic roofi ng for Roman tile roofs, ideal both for new houses and renovations, conservation and restaurations, above all in historical city centres.
Quick assembly and low price.
Hemera is directly fixed to roof structure.
It is quick because it can be fi xed together
with roof insulation.
ADVANTAGES OF THE SYSTEM
The anchoring system requires
no screws, being simply interlocking.
Hemera roof can be assembled
directly by the assembler.
Little ordinary maintenance.
Little ordinary maintenance if compared to traditional
Roman tiles roof (thanks to the use of pre-painted
galvanized steel sheet).
Easy to be fi xed.
The components are cut and prepared
according to the stratum’s fi xing requirements.
Walkable.
Photovoltaic modules are completely walkable.
WHERE BEAUTY RESIDES,B E I N G U N N O T I C E D I S E V E N B E T T E R.
Photovoltaic roof.
67Hemera
Roman tiles corrugated metal sheet
Koeus module
fixing clamp
intermediatebutt strap
butt strap set
Ω metal sheetfor tiles fixing
vapour barrier
polyurethane
wood floor
framework
flexible supportin rolled roofing felt
916
229
140-210
Hemera system can be used with all types of tiles available on the market and at the same time it is possible to reuse the old Roman tiles. Thanks to the aesthetic modules, Hemera can also use parts of the stratum where the installation of photovoltaic modules is not possible.
Aesthetic modules
Koeus photovoltaic modules
68 Accessories
Insulated corrugated metal sheet Upper side material: galvanized steel, Roman tile red painted Lower side material: bituminous felt paper Insulation material: polyurethane foam (PUR) thickness 10 cm
Transmittance value 0,19 W/m2 K
ITEM AND DESCRIPTIONSOST-HE01L01-2500 sheet L=1mSOST-HE01L02-2500 sheet L=2mSOST-HE01L03-2500 sheet L=3mSOST-HE01L04-2500 sheet L=4mSOST-HE01L05-2500 sheet L=5mSOST-HE01L06-2500 sheet L=6m
SOST-HE01L07-2500 sheet L=7mSOST-HE01L08-2500 sheet L=8mSOST-HE01L09-2500 sheet L=9mSOST-HE01L10-2500 sheet L=10mSOST-HE01L13-2500 sheet L=13m
Accessories
Fixing clamp sealMaterial: santoprene,
black color
ITEMSO-HEV04-8500
DESCRIPTIONFixing clamp seal
Fixing clampMaterial: Aluminium, Alloy 6060 or equivalent
Roman tile red painted
ITEMSO-HEM01-2500
DESCRIPTIONFixing clamp
ITEMSO-HEV03-6100
DESCRIPTIONΩ metal sheet
Ω metal sheet for tiles fi xingMaterial: galvanized steel
ITEMSO-HES01-2500
DESCRIPTIONButt strap set
Butt strap set with anchoring bracketsButt strap material: reinforced technopolymer black color
Bracket material: Aluminium, Alloy 6060 or equivalent
Roman tile red painted
69Accessories
Clamping set for Ω metal sheetMaterial: Aluminium, Alloy 6060 or equivalent
Roman tile red painted
ITEMSO-HES02-2500
DESCRIPTIONClamping set for Ω metal sheet
ITEMSOPA-MS040A1-0000SOPA-PS040A1-0000
DESCRIPTIONMonocrystalline Koeus modulePolycrystalline Koeus module
Koeus photovoltaic moduleIndicative power 40 W
Intermediate butt strapMaterial: reinforced technopolymer
black color
ITEMSO-HEV01-8500
DESCRIPTIONIntermediate butt strap
Koeus module supportMaterial: reinforced technopolymer,
black colour
ITEMSO-HEV02-8500
DESCRIPTIONKoeus module support
ITEMSO-HEV05-8500
DESCRIPTIONAdhesive buffer
Adhesive buffer for Koeus moduleMaterial: technopolymer
HEMERA
72
www.thesan.com
Thesan S.p.A. - Via Torino 25 - 10050 Chiusa di San Michele (TO) Italy - tel. 0039 011 19870791 - [email protected]
00MK-L
F20-E
N00