Renault Premium/Magnum

1. To install the emulator, remove the plastic cover on the left side of the steering column, whichsurrounds the OBD connector

2. Then connect the emulator to the wires coming into the OBD connector as described below. eg whitecable emulator to pin 16, the yellow wire to pin 14, etc.

3. The next step is remove the fuse in the cabin (second fuse in the second row). Fuse box is located underthe hood, in front of the passenger seat.

4. When you remove the fuse in the cabin, still on the dashboard lights are errors, you should also removethe fuse F109 behind the battery on the left side of the vehicle. To get to the fuse, unscrew the twoscrews holding the battery cover

In ADR cars fuses may have a different layout

or

5. The final step will be disconnect the NOx sensor , located on the right side of the car on the exhaust