Please read the following instructions andwarnings carefully before use of product. Keep this instruction manual for future reference.

Prodigy™ infant car seat User Guide included andattached to car seat.

Car seat control panel required 3AA batteries (included).

No tools required.For Technical Support Call Consumer Relations 1-800-268-6237

Keep small parts and packaging away from children.

WARNING:Adult assembly required. Exercise care when unpacking and assembling product.

• NEVER leave child unattended. ALWAYS keep child in view while in the stroller.• Avoid serious injury from falling or sliding out. ALWAYS use safety harness.• Stroller maximum weight limit 50 lbs. (22.73 kg).• When making adjustments to the product ALWAYS ENSURE that all parts of a child’s body are clear of any moving parts of the product.• Care must be taken when folding and unfolding the product to prevent finger entrapment.• DO NOT carry additional children, goods or accessories in or on this product except as recommended in this instruction manual.• TO AVOID INJURY TO YOUR CHILD, DO NOT USE STORAGE BASKET AS A CHILD CARRIER.• DO NOT hang items on handle bar or place them on the canopy, as they can tip stroller over and injure child.• DO NOT OVERLOAD STORAGE BASKET. MAXIMUM 10 lbs. (4.5 kg). • DO NOT overload the storage pocket and cup holder. MAXIMUM 2 lbs. (0.9 kg). Excessive weight may cause the stroller to become unstable or tip over.• Do not place hot liquids in the cup holder. Spills can burn your child.• Do not carry or roll stroller on stairs or escalators with child in it.• Do not use the strollers if any part is lost or damaged.Use ONLY with the Summer Infant Prodigy® Infant Car Seat. Other car seats or carriers are not designed to fit the stroller frame and may result in serious injury or death. NEVER use them as they have not been safety tested.• NEVER use Prodigy® infant car seat in stroller without car seat adapter• ALWAYS check to confirm the car seat adapter is securely locked to the stroller before use• ALWAYS check to confirm the Prodigy®car seat is securely locked into the car seat adapter before use • See instructions for additional warnings. If you do not have a User Guide, visit www.summerinfant.com or call Summer Infant Customer Service Dept. at 1-800-268-6237 to receive one.

WARNING:

28710

• Clean minor stains on fabric with cold water and mild soap. Air dry.

• Clean plastic and metal surfaces with a soft damp cloth. Air dry. Do not use abrasive cleaners or solvents. Do not use bleach.

• Check seat pad harness and crotch straps weekly to ensure they are properly secured to frame.

Read and follow all warnings and instructions.Failure to do so could result in serious injury or death.

with prodigy infant car seat®

travel system fuzeTM

TRAVEL SYSTEMINSTRUCTION MANUAL

©2012 Summer Infant, Inc.Colors and styles may vary.Please retain for future reference.

Summer Infant stands behind all of its products. If you are notcompletely satisfied or have any questions, please contactour Consumer Relations Team at 1-800-268-6237 or

www.summerinfant.com/contact(For Europe call (0) 144 250 5000 or

customerserviceuk@summerinfant.com)

connect with us:

www.summerinfant.com

We LOVE our consumers!Get to know us at:

Summer Infant, Inc.1275 Park East DriveWoonsocket, RI 02895 USA1-800-268-6237

care and maintenance:

removing infant car seat from stroller:

pull!pull!

1 2pull release handle onthe back of car seat

lift car seat upby carry handle

Additional accessories available online.For more information visit www.summerinfant.com

click!snap!

snap basket onto frame

snaps!x 3

x 4snaps!

reattaching the storage basket:

pull!

Press release buttonsand pull up on car seatadaptor to remove

3

radio and television interference: (FCC Statement)

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by Summer Infant Inc. for compliance could void the user’s authority to operate the equipment.

Summer Infant Canada11055 Middlegate Road, Unit 2Mississauga, Ontario L4Y 3Y4MADE IN CHINA.

01/13

10 3

Push down on handle to ensure thatstroller is fully open and locked in position!

lift handle up to unfold4

3 push to release locking clip

folding stroller

push small button in with thumband pull back on both releaselevers at same time

1

additional accessories:

click!click!

push!push!

2 push down to fold

Additional accessories available at www.summerinfant.com

Foot muff21420

Rain shield21400

Bug net21410

Bassinet26140

press!press!

11

stroller components:

assembly instructions:

2

IMPORTANT! Before assembly, inspect components for damaged hardware,loose joints or missing parts. Never use if any parts are missing or broken.!

stroller seat

2 rear wheels

2 front wheels

front wheels 28710-05rear wheels 28710-06cup holder 28710-08Prodigy carseat adaptor 28710-04bumper bar 28710-07storage basket 28710-09canopy 28710-03

stroller parts:

click!

stroller frame with basket canopy

cup holder

bumper bar

click!

click!

2

only use the prodigy® infant car seat with this stroller

• Infant car seat adapter must be securely locked to stroller before infant car seat is placed on stroller.• NEVER use infant car seat in stroller without car seat adapter.• CHECK to confirm that car seat adapter and car seat carrier are securely locked to the stroller. • NEVER lift stroller by infant car seat handle.• Read all warnings on front page of this instruction booklet and on product.

WARNING:PREVENT SERIOUS INJURYOR DEATH FROM FALLS

attaching car seat adapter and infant car seat :

Pull up on the car seat adapterto make sure it is securely locked.!

Pull up on the car seat to makesure it is properly locked into place.!

click!click!

1 push on rear wheels, both sides

push on front wheels

press down on brake pedal toengage brake and removestroller seat

click!

align car seat adapter with arrow facingforward. Push down to lock onto frame

®

prodigy car seat adapter®

IMPORTANT! Tug on each wheel toensure they are securely attached!

Remove and dispose of packing material properly!

21

3 install car seat rear facing,push down to lock into position

4 9

releasing wheels:

front wheels rear wheels

finished!

align seat with frame push down65

click!click!

attach canopy to frame andclip both sides to secure

install bumper barand cupholder

87

click!click!

click!click!

click!click!

press!press! press!press!

adjusting shoulder harness positions:

3

2

1

NOTE: before use, ensure that allstroller connections are secure.!

pull!pull!pull!pull!

lower position!1 middle position!2

upper position!3

adjust the harness height to the position that it closest to thechilds shoulder height, use the slide adjusters for further adjustments

NOTE: feed strap entirely through seat padslots when adjusting harnes height!

slide adjustment4

8 5

locking the wheels:

canopy

bumper bar

5-point safety harness

stroller seat

front wheel release button

cup holder

storage basket

rear wheel release button

sweet peek window

soft foam handle

handle height adjust

front wheel lock

front wheels

folding buttons/release levers

pedicure-friendly rear brake

stroller components:

rear wheels - brake front wheels

locking/unlocking the child safety harness:

seat recline button

seat release button

locking clip

storage pocket

holds prodigy® infant car seat (see page 11)

1stopen!

close!close!

rd3

click!click! click!click!nd2

bumper bar release button

cup holder clip (both sides)

rear wheels

NOTE: locking the front wheelsdisables the swivel action!

position 3

press!

6 7

reclining the seat: reversing the seat:

using the bumper bar:

press both recline buttons at the same time and rotate to adjust seat angle. Theseat will click into one of three positions.

press side buttons at thesame time while lifting to release seat

reverse seat21

align seat with frameand push down

3

adjusting the handle height:

press!

press both buttons and adjusthandle to desired height

1position

press!

press!

position 2

press!press!

lift!

click!

press!press!

press!press!

click!

NOTE: before use, ensure that allstroller connections are secure.!

press release button, pull upand swing bumper bar to side

1 NOTE: the bumper bar can beremoved by detaching both sides.

press!