... References

172

Abdelgawad, A.M., Hudson, S.M. and Rojas, O.J. (2014) Antimicrobial

wound dressing nanofiber mats from multicomponent (chitosan/silver-

NPs/polyvinyl alcohol) systems. Carbohydrate Polymer 16(100): 166-78.

Abdelmouleh, M., Boufis, S., Belgacem, M.N. and Dufresne, A. (2007) Short

natural-fibre reinforced polyethylene and natural rubber composites: Effect of

silane coupling agents and fibre loading. Composite Science and Technology

67(7-8): 1627-1639.

Abdel-Razik, E.A. (1990) Homogeneous graft copolymerization of acrylamide

onto Ethylcellulose. Polymer 31:1739-1744.

Abdel-Razik, E.A. (1997) Aspects of thermal graft copolymerization of

methyl methacrylate onto ethyl cellulose in homogeneous media. Polymer

Plastic Technology and Engineering 36: 891-903.

Adekunle, K., Akesson, D. and Skrifvars, M. (2010) Biobased composites

prepared by compression molding with a novel thermoset resin from soybean

oil and a natural fibre reinforcement. Applied Polymer Science 116(3): 1759-

1765.

Agrawal, R., Saxena, N.S., Sharma, K.B., Thomas, S. and Sreekala, M.S.

(2000) Activation energy and crystallization kinetics of untreated and treated

oil palm fibre reinforced phenol formaldehyde composites. Material Science

and Engineering: A 277(1):77-82.

Arbelaiz, A., Fernandez, B., Cantero, G., Llano-Ponte, R., Valea, A. and

Mondragon, I. (2005) Mechanical properties of flax fibre/polypropylene

composites and influence of fibre/matrix modification and glass fibre

hybridization. Composite A 36: 1637-1644.

Arora S., Lala, S., Sharma, C. and Aneja, K.R. (2011) Synthesis, thermal and

antimicrobial studies of chitosan/starch/poly(vinyl alcohol) ternary blend

films. Pelagia Research Library Der Chemica Sinica 2(5):75-86.

Averous, L., Fringant, C. and Moro, L. (2001) Plasticized starch-cellulose

interactions in polysaccharide composites. Polymer 42: 6571-6578.

Azahari, N. A., Othman, N. and Ismail, H. (2011) Biodegradation studies of

polyvinyl alcohol/corn starch blend films in solid and solution media. Journal

of Physical Science 22(2): 15-31.

... References

173

Badawy, S.M., Dessouki, A.M. and El-Din, H.M.N. (2001) Direct pyrolysis

mass spectrometry of acrylonitrile-cellulose graft copolymer prepared by

radiation-induced graft polymerization in presence of styrene as homopolymer

suppressor. Radiation Physics and Chemistry 61(2): 143-148.

Bahrami, S. B., Kordestani S.S., Mirzadeh, H and Mansoori, P. (2003) Poly

(vinyl alcohol)-chitosan blends: preparation, mechanical and physical

properties. Iranian Polymer Journal 12(2): 139-146.

Bardhan, K., Mukhopadhyay, S. and Chatterjee, S.R. (1977) Grafting of

acrylamide onto methyl cellulose by persulfate. Journal of Polymer Science:

Polymer Chemistry 15:141-148.

Bicak, N., Sherrington, D.C. and Senkal, B.F. (1999) Graft copolymer of

acrylamide onto cellulose as mercury selective sorbent. Reactive and

Functional Polymers 41: 69-76.

Bismarck, A., Mishra, S., and Lampke, T. (2005) Plant fibers as reinforcement

for green composites. Natural fibers, biopolymers and biocomposites CRC

Press: Boca Raton 37-108. Mohanty, A.K., Misra, M. and Drzal, L.T. (2005)

Natural fibres, biopolymers and biocomposites CRC Press: Boca Raton, 1-37.

Bledzki, A.K. and Gassan, (1999) Composites reinforced with cellulose based

fibres. Journal of Progress in Polymer Science 24: 221-274.

Bledzki, A.K., Mamun, A.A., Lucka-Gabor, M. and Gutowski, V.S. (2008)

The effects of acetylation on properties of flax fibre and its polypropylene

composites. Express Polymer Letters 2(6): 413-422.

Bledzki, K., Reihmane, S. and Gassan, J. (1996) Properties and modification

methods for vegetable fibers for natural fiber composites. Journal of Applied

Polymer Science 59(8): 1329-1336.

Buleon, A., Colonna, P., Planchot, V. and Ball, S. (1998) Starch granules:

structure and biosynthesis. International Journal of Biological

Macromolecules 23: 85-112.

... References

174

Cantero, G., Arbelaiz, A., Llano-Ponte, R. and Mondragon, I. (2003) Effects

of fibre treatment on wettability and mechanical behaviour of

flax/polypropylene composites. Composite Science and Technology 63(9):

1247-1254.

Carvalho, A.J.F.D., Curvelo, A.A.S. and Agnelli, J.A.M. (2002) Wood pulp

reinforced thermoplastic starch composites. International Journal of

Polymeric Materials 51: 647-660.

Chand, N., Nigrawal, A. and Jain, D. (2008) Dielectric behavior of maleic

anhydride grafted polypropylene (MAgPP) modified sisal fiber reinforced pp

composites. Journal of Natural Fibers 5(3): 270-288.

Chen, L., Imam, S.H., Gordon, S.H. and Greene, R.V. (1997) Starch polyvinyl

alcohol crosslinked film- performance and biodegradation. Journal of

Environmental Polymer Degradation 5(2):111-117.

Cheung, H.Y., Lau, K.T. and Tao, X.M. (2008) A potential material for tissue

engineering: silkworm silk/PLA biocomposite. Composite Part. B:

Engineering 36(6): 1026-1033.

Cinelli, P., Chiellini, E., Imam, S.H. (2008) Hybrid composite based on

poly(vinyl alcohol) and fillers from renewable resources. Journal of Applied

Polymer Science 109: 1684-1691.

Cinelli, P., Chiellini, E., Lawton, J.W. and Imam, S.H. (2006) Foamed articles

based on potato starch, corn fibers and poly(vinyl alcohol). Polymer

Degradation and Stability 91: 1147-1155.

Curvelo, A.A.S., Carvalho, A.J.F.D. and Angelli, J.A.M. (2001)

Thermoplastic starch-cellulosic fibers composites: preliminary results.

Carbohydrate Polymers 45: 183-188.

Dash, B.N., Rana, A.K., Mishra, S.C., Mishra, H.K., Nayak, S.K. and

Tripathy, S.S. (2000). Novel low-cost jute-polyester composite. II. SEM

observation of the fracture surfaces. Polymer Plastic Technology and

Engineering 39(2): 333-350.

Da-Wei, H., Jian-Kun, W., Hai-Rong, L. and Ming-Ming, X. (2011) The graft

copolymerization of corn starch by microwave irradiation with rheological

phase reaction. Journal of Applied Polymer Science 121: 1481-1487.

... References

175

Deo, H.T., Patel, N.K. and , Patel, B.K. (2008) Eco-friendly flame retardant

(FR) pet fibers through p-n synergism. Journal of Engineered Fibers and

Fabrics 3(4): 23-38.

Dhakal, H.N., Zhang, Z.Y. and Richardson, M.O.W. (2007) Effect of water

absorption on the mechanical properties of hemp fibre reinforced unsaturated

polyester composites. Composites Science and Technology 67(7-8): 1674-

1683.

Dhal, J.P and Mishra S.C. (2013) Processing and dielectric properties of bio-

fiber reinforced polymer composite using brown grass flower broom. Journal

of Polymer Composites 1(1): 28-32.

Dipa, R., Sarkar, B.K., Rana, A.K. and Bose, N.R. (2001) Effect of alkali

treated jute fibres on composite properties. Bulletin of Materials Science

24(2): 129-135.

Doan, T.T.L, Gao, S. and Mader, E. (2006) Jute/polypropylene composites I.

Effect of matrix modification. Composites Science and Technology 66(7-8):

952-963.

Dufresne, A. and Vignon, M.R. (1998) Improvement of starch film

performance using cellulose microfibrils. Macromolecules 31: 2693-2696.

Dufresne, A., Dupeyre, D. and Vignon, M.R. (2000) Cellulose microfibrils

from potato tuber cells: processing and characterization of starch cellulose

microfibril composites. Journal of Applied Polymer Science 76: 2080-2092.

Ekebafe, L.O., Imanah, J.E., Ekebafe, M.O. and Ugbesia, S.O. (2010) graft

polymerization of polyacrylonitrile onto rubber (hevea brasiliensis) seed shell-

cellulosic and its utilization potential for heavy metal uptake from aqueous

medium. The Pacific Journal of Science and Technology 11(2):488-498.

Facca, A.G., Kortschot, M.T. and Yan, N. (2007) Predicting the elastic

modulus of natural fiber reinforced thermoplastics, Composite A: Applied

Science and Manufacturing 37:1660-1671.

Fakirov, S. and Bhattacharya, D. (2007) Engineering Biopolymers:

Homopolymers, Blends and Composites. Auckland, New Zealand: Hanser

Gardner Publications.

Fang, J. and Fowler, P. (2003) The use of starch and its derivatives as

biopolymer sources of packaging materials. Food, Agriculture & Environment

1(3): 82-84.

... References

176

Fraga, A.N., Frulloni, E., de la Osa, O., Kenny, J.M. and Vazquez, A. (2006)

Relationship between water absorption and dielectric behaviour of natural

fibre composite materials. Polymer Testing 25: 181-187.

Frederick, T.W. and Norman, W. (2004) Natural fibers plastics and

composites. Kluwer Academic Publishers, New York.

Frederick, T.W., Norman, W. (2004) Natural fibres plastics and composites.

Kluwer Academic Publishers, New York.

Galicia-Garciaa,T. , Martinez-Bustosa, F., Jimenez-Arevalob, O., Martinezc,

A.B., Ibarra-Gomezd, R., Gaytan-Martineza, M. and Mendoza-Duarte, M.

(2011) Thermal and microstructural characterization of biodegradable films

prepared by extrusion-calendering process. Carbohydrate Polymers 83: 354-

361.

Garcia-Jaldon, C., Dupeyre, D. and Vignon, M.R. (1998) Fibres from semi-

retted hemp bundles by steam explosion treatment. Biomass and Bioenergy

14: 251-260.

Gassan, J. and Bledzki, A.K. (1997) The influence of fiber-surface treatment

on the mechanical properties of jute-polypropylene composites. Composite A:

Applied Science and Manufacturing 28:1001-1005.

George, F.F., Robert, C.B. and William, M. (1987) Graft polymerization of

acrylonitrile onto wheat straw. Journal of Applied Polymer Science 33: 899-

906.

George, J., Janardhan, R., Anand, J.S., Bhagawan, S.S. and Thomas, S. (1996)

Melt rheological behaviour of short pineapple fibre reinforced low density

polyethylene composites. Polymer 37(24): 5421-5431.

George, J., Sreekala, M.S. and Thomas, S. (2001) A review of interface

modification and characterisation of natural fibre reinforced plastic

composites. Polymer Engineering and Science 41(9): 1471-1485.

Ghanbarzadeh, B., Almasi, H., Entezami, A.A. (2010) Physical properties of

edible modified starch/carboxymethyl cellulose films. Innovative Food

Science and Emerging Technologies 11: 697-702.

Ghanbarzadeh, B., Oromiehie A., Musavi, M., Razmi, E. and Milani, J.

(2006) Effect of polyolic plasticizers on rheological and thermal properties of

zein resins. Iranian Polymer Journal 15(10): 779-787.

... References

177

Gopalan, A., Vasudevan, T., Ramasubramanian, and Hariharanb, S.S. (2000)

Peroxodisulphate/peroxodiphosphate - ascorbic acid redox initiated graft

copolymerizati on of acrylonitrite methylmethacrylate onto

polyethyleneterephthalate - a close comparison. Journal of Polymeric

Materials 45: 79-121.

Goring, D. and Bolam, F. (1976) Plasma-induced adhesion in cellulose and

synthetic polymers in the fundamental properties of paper related to its uses,

Ed., Ernest Benn Limited, London,172.

Guimaraes, J.L., Wypych, F., Saul, C.K., Ramos, L.P. and Satyanarayana,

K.G. (2010) Studies of the processing and characterization of corn starch and

its composites with banana and sugarcane fibers from Brazil. Carbohydrate

Polymers 80:130-138.

Gupta, K.C. and Khandekar, K. (2002) Graft copolymerization of acrylamide-

methylacrylate comonomers onto cellulose using ceric ammonium nitrate.

Journal of Applied Polymer Science 86: 2631-2642.

Gupta, K.C. and Sahoo, S. (2000) Ceric ion initiated grafting on cellulose

from binary mixture of acrylonitrile and methylacrylate. Journal of

Macromolecular Science: Part A 37(5): 447-468.

Gupta, K.C. and Sahoo, S. (2001) Co(III) Acetylacetonate-complex-initiated

grafting of N-vinyl pyrrolidone on cellulose in aqueous media. Journal of

Applied Polymer Science 81: 2286-2296.

Hajnalka, H., Racz, I. and Anandjiwala, R.D. (2008) Development of HEMP

fibre reinforced polypropylene composites. Journal of Thermoplastic

Composite Materials 21: 165-174.

Hana, X., Chen, S. and Hu, X. (2009) Controlled release fertilizer

encapsulated by starch/polyvinyl alcohol coating. Desalination 240: 21-26.

Hebeish, A., Refie, E. I. and Waly, A. I. (1976). Thiourea-potassium bromate

redox system-initiated graft polymerization of methyl methacrylate and

methacrylic acid on nylon 6. Journal of Polymer Science: Part A-Polymer

Chemistry 14(12): 2895-2902.

Huda, M.S., Drzal, L.T., Mohanty, A.K. and Misra, M. (2008) Effect of fiber

surface-treatments on the properties of laminated biocomposites from

poly(lactic acid) (PLA) and kenaf fibers. Composite Science and Technology

68: 424-432.

... References

178

Ibrahim, M.D., Mondal, H., Uraki, Y., Ubukata, M., Itoyama, K. (2008) Graft

polymerization of vinyl monomers onto cotton fibres pretreated with amines.

Cellulose 15: 581-592.

Ibrahim, M.M., Flefel, E.M. and El-Zawawy, W.K. (2002) Cellulose

membranes grafted with vinyl monomers in a homogeneous system, Polymer

Advanced Technology 13: 548-557.

Ibrahim, M.M., Flefel, E.M. and El-Zawawy, W.K. (2002) Cellulose

membranes grafted with vinyl monomers in homogeneous system, Journal of

Applied Polymer Science 84: 2629-2638.

Ibrahim, N.A., Wan-Yunus, W.M.Z., Abu-Ilaiwi, F.A.F., Rahman, M.Z.A.,

Ahmad, M.B. and Dahlan, K.Z.M. (2003) Optimized condition for grafting

reaction of poly(butyl acrylate) onto oil palm empty fruit bunch fibre. Polymer

International 52: 1119-1124.

Imam, S.H., Cinelli, P., Gordon, S.H. and Chiellini, E. (2005) Characterization

of Biodegradable composite films prepared from blends of poly(vinyl

alcohol), cornstarch, and lignocellulosic fiber. Journal of Polymers and the

Environment 13(1): 47-55.

Imam, S.H., Cinelli, P., Gordon, S.H. and Chiellini, E. (2005) Characterization

of biodegradable composite films prepared from blends of poly(vinyl alcohol),

cornstarch, and lignocellulosic fiber. Journal of Polymers and the

Environment 13(1): 47-55.

Jacob, M., Thomas, S. and Varughese, K.T (2004) Mechanical properties of

sisal/oil palm hybrid fiber reinforced natural rubber composites. Composite

Science and Technology 64(7): 955-965.

Jang, J. and Yang, H. (2000) The effect of surface treatment on the

performance improvement of carbon fiber/polybenzoxazine composites,

Journal of Material Science 35: 2297-2303.

Jayamol, G., Bhagwan, S.S. and Thomas S. (1997) Electrical properties of

pineapple fiber reinforced polyethylene composite. Journal of Polymer

Engineering 17(5): 383-404.

Jonjankiat, S., Wittaya, T and Sridach, W. (2011) Improvement of poly(vinyl

alcohol) adhesives with cellulose microfibre from sugarcane bagasse. Iranian

Polymer Journal 20(4): 305-317.

... References

179

Jonoobi, M., Harun, J., Shakeri, A., Misra, M., & Oksman K. (2009) Chemical

composition crystanility and thermal degradation of bleached and unbleached

kanef bast (Hibiscus Cannabinus). Bioresource 4: 626-639.

Joseph, K, Mattoso, L.H.C., Toledo, R.D., Thomas, S., de Carvalho, L.H.,

Pothen, L., Kala, S. and James, B. (2000). Frollini E, Leao AL, Mattoso LHC,

San Carlos (eds) Natural polymers and agro fibers composites. Embrapa, USP-

IQSC, UNESP, Brazil

Joseph, K., Filho, R.D.T., James, B., Thomas, S. and Carvalho, L.H. (1999) A

review on sisal fiber reinforced polymer composites. Revista Brasileira de

Engenharia Agricola e Ambiental 3(3):367-376.

Joseph, K., Thomas, S. and Pavithran, C. (1996) Effect of chemical treatment

on the tensile properties of short sisal fibre reinforced polyethylene

composites. Polymer 37(23): 5139-5149.

Joseph, P.V. (2001) Studies on short sisal fibre reinforced isotactic

polypropylene composites. PhD Thesis. Mahatma Gandhi University, India.

Joseph, P.V., Joseph. K., Thomas, S., Pillai, C.K.S., Prasad, V.S., Groeninckx,

G. and Sarkissova, M. (2003) The thermal and crystallization studies of short

sisal fibre reinforced polypropylene composites. Composite A: Applied

Science and Manufacturing 34(3): 253-266.

Joseph, S., and Thomas, S., (2008) Electrical properties of banana fiber-

reinforced phenol formaldehyde composites. Journal of Applied Polymer

Science 109: 256-263.

Kaith, B.S. and Kalia, S (2007) Synthesis and characterization of graft co-

polymers of flax fiber with binary vinyl monomers. International Journal of

Polymer Analysis and Characterization 12: 401-412.

Kaith, B.S. and Kalia, S. (2008) Graft copolymerization of MMA onto flax

under different reaction conditions: a comparative study. Express Polymer

Letters 2(2): 93-100.

Kaith, B.S., Singha, A.S. and Kalia, S. (2007) Grafting MMA onto flax under

the influence of microwave radiation and the use of flax-g-poly(MMA) in

preparing PF composites. Autex Research Journal 7(2): 119-129.

Kaith, B.S., Singha, A.S., Kumar, S. and Kalia, S. (2008) Mercerization of

flax fiber improves the mechanical properties of fiber-reinforced composites.

International Journal of Polymeric Materials 57(1): 54-72.

... References

180

Kalaprasad, G., Francis, B., Radhesh, C., Pavithran, C., Groeninckx, G. and

Thomas, S. (2004) Effect of fibre length and chemical modifications on the

tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced

low density polyethylene composites. Polymer International 53(11): 1624-

1638.

Kalia, S and Kaith, B.S. (2009) Synthesis of flax-g-copolymers under pressure

for use in phenolic composites as reinforcement. Journal of Chilean Chemical

Society 54(2): 108-112.

Kalia, S, Kaith, B.S. (2008) Mechanical properties of phenolic composites

reinforced with flax-g-copolymers prepared under different reaction

conditions - a comparative study. E-Journal of Chemistry 5(1): 177-184.

Kalia, S., Kumar, A, Kaith, B.S. (2011) Sunn hemp cellulose graft copolymers

polyhydroxybutyrate composites: morphological and mechanical studies.

Advance Material Letter 2(1): 17-25.

Kang, P.H., Jeun, J.P., Chung, B.Y., Kim, J.S. and Nho, Y.C. (2007)

Preparation and characterization of glycidyl methacrylate (GMA) grafted

kapok fiber by using radiation induced-grafting technique Journal of

Industrial and Engineering Chemistry 13(6): 956-958.

Katori, S. and Kimura, T. (2002) Injection moulding of silk fiber reinforced

biodegradable composites. In Brebbia C.A. and de Wilde W.P. (ed), High

Performance Structures and Composites. WIT Press, Boston, 2: 97-105.

Kaushik, V.K., Kumar, A. and Kalia, S. (2012) Effect of mercerization and

benzoyl peroxide treatment on morphology, thermal stability and crystallinity

of sisal fibers. International Journal of Textile Science 1(6): 101-105.

Kechaou, B., Salvia, M., Beaugiraud, B., Juve, D., Fakhfakh, Z. and Treheux,

D. (2010) Mechanical and dielectric characterization of hemp fibre reinforced

polypropylene (HFRPP) by dry impregnation process. Express Polymer

Letters 4(3): 171-182.

Keener, T.J., Stuart, R.K. and Brown, T.K. (2004) Maleated coupling agents

for natural fibre composites. Composite A: Applied Science and

Manufacturing 35(3): 357-262.

Kenneth, J.B. (1992) Void effects on the interlaminar shear strength of

unidirectional graphite-fibre-reinforced composites. Composite Materials

26(10): 1487-1992.

... References

181

Khalil, M.S., Ahmed Z. S. and Elnawawy, A.S. (2013) Evaluation of the

physicochemical properties and antimicrobial activities of bioactive

biodegradable films. Jordan Journal of Biological Sciences 6(1): 51-60.

Khan, G.M.A., Saheruzzanam, M., Abdur, R.S.M., Islam, M.S., Alam, M.S.

and Islam, M.M. (2009) Grafting of acrylonitrile monomer onto bleached okra

fiber and its textile properties. Indian journal of fibre and textile research 34:

321-327.

Khan, G.M.A.T (2007) Dyeing of grafted jute fibre with reactive dyes and its

improved properties, International Journal of Science and Technology 12(3):

8-13.

Khoathane, M.C., Vorster, O.C. and Sadiku, E.R. (2008) Hemp fiber-

reinforced 1-pentene/polypropylene copolymer: the effect of fiber loading on

the mechanical and thermal characteristics of the composites. Journal of

Reinforced Plastic and Composites 27: 1533-1544.

Khullar, R., Varshney, V.K., Naithani, S.and Soni, P.L. (2008) Grafting of

acrylonitrile onto cellulosic material derived from bamboo (Dendrocalamus

strictus), Express Polymer Letters 2(1):12-18.

Kinoshita, H., Kaizu, K., Fukuda, M., Tokunaga, H., Koga, K. and Ikeda, K.

(2009) Development of green composite consists of woodchips, bamboo fibers

and biodegradable adhesive. Composites: Part B 40: 607-612.

Kumar, R., Yakubu, M.K. and Anandjiwala, R.D. (2010) Biodegradation of

flax fiber reinforced poly lactic acid. Express Polymer Letters 4(7): 423-430.

Kumar, V., Bhardwaj, Y.K., Jamdar, S.N., Goel, N.K. and Sabharwal, S.J.

(2006) Preparation of an anion‐exchange adsorbent by the radiation‐induced

grafting of vinylbenzyltrimethylammonium chloride onto cotton cellulose and

its application for protein adsorption. Applied Polymer Science 102: 5512-

5521.

Larbig, H., Scherzer, H., Dahlke, B, and Poltrock, R. (1998) Natural Fiber

reinforced foams based on renewable resources for automotive interior

applications. Journal of Cellular Plastics 34: 361-379.

Lawton, J.W., (1996) Effect of starch type on the properties of starch

containing films. Polymers 29 (1): 203-208.

... References

182

Laxmeshwar, S.S., Kumar, D.J.M., Viveka, S. and Nagaraja, G.K. (2012)

Preparation and properties of biodegradable film composites using modified

cellulose fibre-reinforced with PVA. ISRN Polymer Science 2012: 1-8.

Lee S.M., Cho D., Park W.H., Lee S.G., Han S.O. and Drzal L.T. (2005)

Novel silk/poly (butylenes succinate) biocomposites: the effect of short fiber

content on their mechanical and thermal properties. Composites Science and

Technology 65: 647-657.

Lee, B.H., Kim, H.J. and Yu, W.R. (2009) Fabrication of long and

discontinuous natural fibre reinforced polypropylene biocomposites and their

mechanical properties. Fiber and Polymers 10: 83-90.

Lee, S.H. and Wang, S. (2006) Biodegradable polymers/bamboo fiber

biocomposite with bio-based coupling agent. Composites: Part A 37: 80-91.

Lenka, S. and Nayak, P.L. (1982) Grafting vinyl monomers onto nylon 6. VI.

Graft copolymerization of methyl methacrylate onto nylon 6 using

acetylacetonate complex of Mn(III), Co(III), and Fe(III). Journal of Applied

Polymer Science 27(6):1959-65.

Leonard, Y.M. and Ansell, M.P. (1999) The effect of chemical treatment on

the properties of hemp, sisal, jute and kapok fibres for composite

reinforcement. Macromolecular Chemistry 272(1): 109-110.

Leonard, Y.M. and Martin, P.A. (2002) Chemical modification of hemp, sisal,

jute and kapok fibres by alkalisation. Journal of Applied Polymer Science

84(12): 2222-2234.

Leonard, Y.M., Nick, T., & Andrew, J.C., (2007) Mechanical properties of

hemp fibre reinforced euphorbia composites. Macromolecular Materials and

Engineering 292(9): 993-1000.

Li, X., Panigrahi, S., Tabil, L.G. and Crerar, W.J. (2004) 2004 CSAE/ASAE

Annual Intersectional Meeting, Winnipeg, Canada, 24-25 September.

Li. X., Tabil, L.G., Panigrahi, S. and Crerar, W.J. (2009) The influence of

fiber content on properties of injection molded flax fiber-HDPE

biocomposites. Biosystem Engineering 8(148): 1-10.

Lipsa, R., Tudorachi, N. and Vasile, C. (2008) Poly(vinyl alcohol)/poly(lactic

acid) blends biodegradable films doped with colloidal silver. Revue Roumaine

de Chimie 53(5): 405-413

... References

183

Liu, S. and Sun, G. (2008) Radical graft functional modification of cellulose

with allyl monomers: Chemistry and structure characterization. Carbohydrte

Polymer 71: 614-625

Liu, Y., Zhang,Y., Liu, Z. and Deng, K. (2002) Graft copolymerization of

butyl acrylate onto casein initiated by potassium diperiodatonickelate(IV) in

alkaline medium. European Polymer Journal 38: 1619-1625.

Lu, C., Chen, P., Yu, Q., Ding, Z., Lin, Z. and Li W. (2007) Interfacial

adhesion of plasma-treated carbon fiber/poly(phthalazinone ether sulfone

ketone) composite, Journal of Applied Polymer Science 106: 1733-1741.

Maiti, M., Kaith B.S. and Jindal, R. and Jana, A.K. (2010) Synthesis and

characterization of corn starch based green composites reinforced with

Saccharum spontaneum L graft copolymers prepared under micro-wave and

their effect on thermal, physio-chemical and mechanical properties. Polymer

Degradation and Stability 95: 1694-1703.

Majid, R.A., Ismail, H. and Taib, R.M. (2010) Effects of polyethylene-g-

maleic anhydride on properties of low density polyethylene/thermoplastic sago

starch reinforced kenaf fibre composites. Iranian Polymer Journal 19(7): 501-

510.

Maldas, D., Kokta, B.V. and Daneault, C. (1989) Influence of coupling agents

and treatments on the mechanical properties of cellulose fiber-polystyrene

composites. Journal of Applied Polymer Science 37(3): 751-775.

Manikandan Nair, K.C., Thomas, S and Groeninckx, G. (2001) Thermal and

dynamic mechanical analysis of polystyrene composites reinforced with short

sisal fibres. Composite Science and Technology 61(16): 2519-2529.

Manikandan, N.K.C., Thomas, S. and Groeninckx, G. (2001) Thermal and

dynamic mechanical analysis of polystyrene composites reinforced with short

sisal fibres. Composites

Mao, L., Imam, S., Gordon, S., Cinelli, P. and Chiellini, E. Extruded

cornstarch-glycerol-polyvinyl alcohol blends: mechanical properties,

morphology, and biodegradability. Journal of Polymers and the Environment

8(4): 205-211.

Meng, T., Gao, X., Zhang, J., Yuan, J., Zhang, Y. and He, J. (2009) Graft

copolymers prepared by atom transfer radical polymerization (ATRP) from

cellulose. Polymer 50: 447-454.

... References

184

Miah, M.J., Khan, M.A. and Khan, R.A. (2011) Fabrication and

characterization of jute fiber reinforced low density polyethylene based

composites: effects of chemical treatment. Journal of Scientific Research 3(2):

249-259.

Mishra, S., Misra, M., Tripathy, S.S., Nayak, S.K. and Mohanty, A.K. (2002)

The influence of chemical surface modification on the performance of sisal

polyester biocomposites. Polymer Composites 23(2):164-170.

Mishra, S., Mohanty, A.K., Drzal, L.T., Mishra, M., Parija, S., Nayak, S.K.

and Tripathy, S.S. (2003) Studies on mechanical performance of biofibre/glass

reinforced polyester hybrid composites. Composite Science and Technology

63(10):1377-1385.

Mishra, S., Naik, J.B. and Patil, Y.P. (2000) The compatibilising effect of

maleic anhydride on swelling and mechanical properties of plant-fiber-

reinforced novolac composites. Composite Science and Technology

60(9):1729-1735.

Mittal, H., Kaith, B.S. and Jindal, R. (2010) Synthesis, characterization and

swelling behaviour of poly(acrylamide-comethacrylic acid) grafted Gum

ghatti based superabsorbent hydrogels. Advances in Applied Science Research

1(3): 56-66.

Mohanty, A.K., Misra, M. and Drzal, L.T. (2001) Surface modifications of

natural fibers and performance of the resulting biocomposites: an overview.

Comp Interfaces 8(5): 313-43.

Mohanty, A.K., Misra, M. and Hinrichsen, G. (2000) Biofibres, biodegradable

polymers and biocomposites: An overview. Macromolecular Materials and

Engineering 276-277(1): 1-24.

Mohanty, A.K., Tripathy, P.C., Misra, M., Parija, S. and Sahoo, S. (2000)

Chemical modification of pineapple leaf fiber: Graft copolymerization of

acrylonitrile onto defatted pineapple leaf fibers. Journal of Applied Polymer

Science 7: 3035-3043.

Mohanty, S., Nayak, S.K., Verma, S.K. and Tripathy, S. S. (2004): Effect of

MAPP as a coupling agent on the performance of jute-pp composites. Journal

of Reinforced Plastics and Composites 23(6): 625-637.

Morra, M., Occhiello, Cosnier, S., Fologen, D., Szunerits, S. and Marks, R.S.

(2000) Poly(dicarbazole- N-hydroxysuccinimide) film: a new polymer for the

... References

185

reagentless grafting of enzymes and redox initiators. Electrochemistry

Communication 2(12): 827-31.

Mukhopadhyay, S., Prasad, J. and Chatterjee, S.R., (1975) Grafting of acrylic

acid onto methylcellulose. Macromolecular Chemistry, 176: l-7.

Mustata, A. (1997) Factors influencing fiber-fiber friction in the case of

bleached flax. Celluose Chemistry and Technology 31:405-413.

Nagieb, Z.A., Nassar, M.A. and Magda G. El-Meligy1 (2011) Effect of

addition of boric acid and borax on fire-retardant and mechanical properties of

urea formaldehyde saw dust composites. International Journal of

Carbohydrate Chemistry 2011: 1-6.

Nair, K.C.M., Thomas, S. and Groeninckx, G. (2001) Thermal and dynamic

mechanical analysis of polystyrene composite reinforced with short sisal

fibers. Composite Science and Technology 61, 2519-2529.

Naznin, M., Abedin, M.Z., Khan, M.A. and Gafur, M.A (2012) Influence of

acacia catechu extracts and urea and gamma irradiation on the mechanical

properties of starch/PVA based material. ISRN Polymer Science 2012:1-8.

Nigrawal, A. and Chand, N. (2012) Preparation, dielectric and A.C.

conductivity studies on chemically treated sisal powder filled polyvinyl

alcohol biocomposites, International Journal of Engineering. Science and

Technology 4(2): 191-209.

Ojah, R. and Dolui, S.K. (2006) Graft copolymerization of methyl

methacrylate onto Bombyx mori initiated by semiconductor-based

photocatalyst. Bioresource Technology 97: 1529-1535.

Okieimen, E.F. and Ebhoaye, J.E. (1986) Grafting acrylic acid monomer on

cellulosic materials, Journal of Macromolecular Science: Part A-Chemistry

23: 349-353.

Otaigbe, J.U., Goel, H., Babcock, T. and Jane, J. (1999) Processability and

properties of biodegradable plastics made from agricultural biopolymers.

Journal of Elastomers and Plastics 31: 56-71.

Ouajai, S. and Shanks, R.A. (2005) Composition, structure and thermal

degradation of hemp cellulose after chemical treatment. Polymer degradation

and stability 89(2): 327-335.

... References

186

Ouajai, S., Hodzic, A. and Shanks, R.A. (2004) Morphological and grafting

modification of natural cellulose fibers. Journal of Applied Polymer Science

94: 2456-2465.

Panthapulakkal, S. and Sain, M. (2007) Injection-molded short hemp

fiber/glass fiber reinforced polypropylene hybrid composites-mechanical,

water absorption and thermal properties. Journal of Applied Polymer Science

103: 2432-2441.

Park, H.R., Chough, S.H., Yun, Y.H. and Yoon, S.D. (2005) Properties of

starch/PVA blend films containing citric acid as additive. Journal of Polymers

and the Environment 13(4): 375-382.

Paul, A., Joseph, K. and Thomas, S. (1997) Effect of surface treatments on the

electrical properties of low-density polyethylene composites reinforced with

short sisal fibers. Composite Science and Technology 57(1): 67-79.

Paul, A., Joseph, K. and Thomas, S. (1997) Effect of surface treatments on the

electrical properties of low-density polyethylene composites reinforced with

short sisal fibers Composite Science and Technology 57: 67-79.

Paul, A., Joseph, K. and Thomas, S. (1997) Effect of surface treatments on the

electrical properties of low-density polyethylene composites reinforced with

short sisal fibers. Composite Science and Technology 57(1):67-79.

Peng, L.I.U. (2007) A novel degradable adsorbent of the hyper branched

aliphatic polyester grafted cellulose for heavy metal ions. Turkish Journal of

Chemistry 31: 457-462.

Perpeir, P.H.F., Voorward, H.C.J., Cioffi, M.O.H., Mulinati, D.R., Luz,

S.M.D. and Silva, M.L.C.P.D. (2011) Sugarcane bagasses pulping and

bleaching: thermal and chemical characterization. Bioresource 6(3): 2471-

2482.

Pickering, K.L., Li, Y., Farrell, R.L. and Lay, M. (2007) Interfacial

modification of hemp fibre reinforced composites using fungal and alkali

treatment. Biobased Material and Bioenergy 1(1): 109-117.

Prasad, S.V., Pavithran, C. and Rohatgi, P.K. (1983) Alkali treatment of coir

fibres for coir-polyester composites. Material Science 18(22): 1443-1454.

Ramesh, M., Palanikumar, K. and Reddy, K.H. (2013) Mechanical property

evaluation of sisal-jute-glass fiber reinforced polyester composites.

Composites: Part B 48: 1-9.

... References

187

Ramirez, M.G.L., Muniz, G.I.B., Satyanarayana K.G. and Tanobe, V. (2010)

Preparation and characterization of biodegradable composites based on

brazilian cassava starch, corn starch and green coconut fibers. Matéria (Rio de

Janeiro) 15(2): 330-337.

Rashed, H.M.M.A., Islam M.A. and Rizvi, F.B. (2006) Effects of process

parameters on tensile strength of jute fiber reinforced thermoplastic

composites. Journal of Naval Architecture and Marine Engineering 31: 1-6

Ray, D., Sarkar, B.K., Rana, A.K. and Bose, N.R. (2001) Effect of alkali

treated jute fibres on composite properties. Bulletin Material Science 24(2):

129-135.

Reddy, N. and Yang, Y. (2011) Completely biodegradable soyprotein-jute

biocomposites developed using water without any chemicals as plasticizer.

Industrial Crops and Products 33(1): 35-41.

REFERENCES Rong, M.Z., Zhang, M.Q., Liu, Y., Yang, G.C. and Zeng, H.M. (2001) Effect

of fiber treatment on the mechanical properties of unidirectional sisal-

reinforced epoxy composites. Composite Science and Technology

61(10):1437-1447.

Rout, J., Misra, M., Tripathy, S., Nayak, S.K. and Mohanty, A.K. (2001). The

influence of fibre treatment on the performance of coir-polyester composites.

Composite Science and Technology 61(9): 1303-1310.

Rout, J., Misra, M., Tripathy, S.S., Nayak, S.K. and Mohanty, A.K. (2002)

Surface modification of coir fibers. II. Cu(II) initiated graft copolymerization

of acrylonitrile onto chemically modified coir fibers. Journal of Applied

Polymer Science 84: 75-82.

Rowell, R.M., Young, R.A. and Rowell, J.K. (2000) Paper and composites

from agro-based resources. Carbohydrate Polymers 41(1): 69-78.

Roy, A.S., Gupta, S., Sindhu, S., Parveen, A.P. and Ramamurthy, C. (2013)

Dielectric properties of novel PVA/ZnO hybrid nanocomposite films.

Composites: Part B 47: 314-319.

Saheb, N.D. and Jog, J.P. (1999) Natural fibre polymer composites: A review.

Advances in Polymer Technology 18(4): 351-363.

Sahoo, P.K., Samantaray, H.S. and Samal, R.K. (1986) Graft

copolymerization with new class of acidic peroxo salts as initiators. I. Grafting

... References

188

of acrylamide onto cotton-cellulose using potassium monopersulfate catalyzed

by Co(II). Journal of Applied Polymer Science 32: 5693-5703.

Sain, M., Park, S.H., Suhara, F. and Law, S. (2004) Flame retardant and

mechanical properties of natural fibre-PP composites containing magnesium

hydroxide. Polymer Degradation and Stability 83(2): 363-367.

Saleem, Z., Rennebaum, H., Pudel, F. and Grimm, E. (2008) Treating bast

fibres with pectinase improves mechanical characteristics of reinforced

thermoplastic composites. Composites Science and Technology 68: 471-476.

Sapieha, S., Allard, P. and Zang, Y.H. (1990) Dicumyl peroxidemodified

cellulose/LLDPE composites. Applied Polymer Science 41(9-10): 2039-2048.

Sarani, Z. and Poh, K.L. (2002) Polystyrene-benzoylated EFB reinforced

composites. Polymer-Plastics Technology and Engineering 41(5): 951-962.

Sariffuddin, N., Ismail, H. and Ahmad, Z. (2012) Effect of fibre loading on

properties of Thermoplastic sago starch (TPSS)/kenaf core fibre (KF).

Bioresources 7(3): 4294-4306.

Seki, Y. (2009) Innovative multifunctional siloxane treatment of jute fibre

surface and its effect on the mechanical properties of jute/thermoset

composites. Materials Science and Engineering 508(1-2): 247-252.

Sever, K., Sarikanat, M., Seki, Y., Erkan, G.K. and Erdog, U.M. (2010)

Mechanical properties of γ methacryl-oxypropyltrimethoxy silane-treated jute/

polyester composites. Composite Materials 44(15): 1913-1924.

Sgriccia, N., Hawley, M. and Misra, M. (2008) Characterization of natural

fibre surfaces and natural fibre composites. Composites Part A- Applied

Science & Manufacturing 39(3): 514-522.

Singh, I., Bajpaia, P.K., Malika, D., Sharma, A.K. and Kumar, P. (2011)

Feasibility study on microwave joining of ‘green’ composites. Akademeia

1(1): 1923-1504.

Singha, A.S. and Rana, A. K. (2012) A study on benzoylation and graft

copolymerization of lignocellulosic cannabis indica fiber. Journal of Polymer

and Environment 20: 361-371.

Singha, A.S. and Rana, A.K. (2012) Ce(IV) ion-initiated and microwave

radiation-induced graft copolymerization of acrylic acid onto lignocellulosic

fibers. International Journal of Polymer Analysis and Characterization 17:

72-84.

... References

189

Singha, A.S. and Rana, R.K. (2010) Enhancement of hydrophobic character of

lignocellulosic fibers through graft copolymerization. Advance Material

Letters 1(2): 156-163.

Singha, A.S. and Rana, R.K. (2010) Microwave induced graft

copolymerization of methyl methacrylate onto lignocellulosic fibers.

International Journal of Polymer Analysis and Characterization 15: 370-386.

Singha, A.S. and Thakur, V. K. (2008) Saccaharum cilliare fiber reinforced

polymer composites. E-Journal of Chemistry 5(4): 782-791.

Singha, A.S. and Thakur, V.K (2008) Effect of fibre loading on urea-

formaldehyde matrix based green composites. Iranian Polymer Journal

17(11): 861-873.

Singha, A.S. and Thakur, V.K. (2009) Grewia optiva fiber reinforced novel,

low cost polymer composites. E-Journal of Chemistry 6(1):71-76.

Singha, A.S. and Thakur, V.K. (2009) Synthesis and characterizations of

silane treated Grewia optiva fibers. International Journal of Polymer Analysis

and Characterization 14(4): 301-321.

Singha, A.S. Guleria, A. and Rana, R.K. (2013) Ascorbic acid-H2O2 initiated

graft copolymerization of methyl methacrylate onto Abelmoschus Esculentus

fiber: a kinetic approach. International Journal of Polymer Analysis and

Characterization 18: 1-14.

Sreekala, M.S. and Thomas, S. (2003) Effect of fibre surface modification on

water-sorption characteristics of oil palm fibres. Composite Science and

Technology 63(6): 861-869.

Sreekala, M.S., Kumaran, M.G. and Thomas, S. (2002) Water sorption in oil

palm fiber reinforced phenol formaldehyde composites. Composite A: Applied

Science and Manufacturing 33: 763-777.

Sreekala, M.S., Kumaran, M.G., Joseph, Jacob, S.M. and Thomas, S. (2000)

Oil palm fibre reinforced phenol formaldehyde composites: influence of fibre

surface modifications on the mechanical performance. Applied Composite

Materials 7(6): 295-329.

Sreekala, M.S., Kumaran, M.G., Joseph, S., Jacob, M. and Thomas, S. (2000)

Oil palm fibre reinforced phenol formaldehyde composites: influence of fibre

surface modifications on the mechanical performance. Applied Composite

Materials 7: 295-305.

... References

190

Stark, N. M., White, R.H., Mueller, S.A. and Osswald, T.A. (2010) Evaluation

of various fire retardants for use in wood flourepolyethylene composites

Polymer. Degradation and Stability 9: 1903-1910.

Taj, S., Munawar, M.A. and Khan, S. (2007) Review: Natural fibre reinforced

polymer composites. The Proceedings of the Pakistan Academy of Sciences

44(2): 129-144.

Teixeira, E.D.M., Pasquini, D., Curvelo, A.A.S., Corradini, E.,Belgacem,

M.N. and Dufresne, A. (2009) Cassava bagasse cellulose nanofibrils

reinforced thermoplastic cassava starch. Carbohydrate Polymers 78: 422-431.

Thakur, V.K. Singha, A.S. and Thakur, M.K. (2012) Modification of natural

biomass by graft copolymerization. International Journal of Polymer Analysis

and Characterization 17: 547-555.

Thakur, V.K., Singha, A.S. and Nath, M.B (2011) Graft copolymerization of

methyl methacrylate onto cellulosic biofibers. Journal of Applied Polymer

Science 122: 532-544.

Thakur, V.K., Singha, A.S. and Thakur, M.K. (2012) Pressure induced

synthesis of EA grafted saccaharum cilliare fibers. International Journal of

Polymeric Materials and Polymeric Biomaterials 63: 17-22.

Thwe, M.M. and Liao. (2003) Durability of bamboo-glass fiber reinforced

polymer matrix hybrid composites. Composite Science and Technology

63:375-387.

Tripathi, S., Mehrotra, G.K. and Dutta, P.K. (2009) Physicochemical and

bioactivity of cross-linked chitosan-PVA film for food packaging applications.

International Journal of Biological Macromolecules 45: 372-376.

Tserki, V., Zafeiropoulos, N.E., Simon, F. and Panayiotou, C. (2005) A study

of the effect of acetylation and propionylation surface treatments on natural

fibres. Composites: Part A 36(8): 1110-1118.

Tudorachi, N., Cascaval, C.N., Rusu, M. and Pruteanu, M. (2000) Testing of

polyvinyl alcohol and starch mixtures as biodegradable polymeric materials.

Polymer Testing 19: 785-799.

Valadez-Gonzalez, A., Cervantes-Uc, J.M., Olayo, R. and Herrera-Franco, P.J.

(1999) Chemical modification of henequen fibres with an organosilane

coupling agent. Composite Part B: Engineering 30(3): 321-331.

... References

191

Van de Velde, K. and Kiekens, P. (2003) Effect of material and process

parameters on the mechanical properties of unidirectional and multidirectional

flax/polypropylene composites. Composite Structure 62: 443-448.

Van de Weyenberg, I., Ivens, J., De Coster, A., Kino, B., Baetens, E. and

Vepoes, I. (2003) Influence of processing and chemical treatment of flax

fibres on their composites. Composite Science and Technology 63(9):1241-

1246.

Vaxman, A., Narkis, M., Siegmann, A. and Kenig, S. (2004) Void formation

in short-fibre thermoplastic composites. Polymer Composite 10(6): 449-453.

Vert, M, Santos, I.D., Ponsart, S., Alauzet, N., Morgat, J.L., Coudane, J. and

Garreau, H. (2002) Degradable polymers in a living environment: where do

you end up? Polymer International 51(10): 840-844.

Viviana, P.C., Claudia, V., Jose, M.K. and Analia, V. (2004) Effect of

chemical treatment on the mechanical properties of starch based blends

reinforced with sisal fibre. Composite Material 38(16): 1387-1399.

Wambua, P., Ivens, U. and Verpoest, I. (2003) Natural fibers: can they replace

glass in fiber-reinforced plastics? Composite Science and Technology

63:1259-1264.

Wang, B., Panigrahi, S., Tabil, L. and Crerar, W. (2007) Pre-treatment of flax

fibers for use in rotationally molded biocomposites. Journal of Reinforced

Plastic Composite 26: 447-463.

Wang, L. and Xu, Y. (2006) Preparation and characterization of graft

copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in

aqueous medium. Cellulose 13: 191-200.

Wattanakornsiri, A., Pachana, K., Kaewpirom, S., Sawangwong P. and

Songklanakarin, C.M. (2011) Green composites of thermoplastic corn starch

and recycled paper cellulose fibers. Journal of Science and Technology 33(4):

461-467.

Wollerdorfer, M. and Bader, H. (1998) Influence on natural fibers on the

mechanical properties of biodegradable polymers. Industrial Crops and

Products 8: 105-112.

Wu, Z.H., Pittman, C.U. and Gardner, S.D. (1996). Chemical treatments of

natural fiber for use in natural fiber-reinforced composites: A review. Carbon

34(1):59-62.

... References

192

Xue, L., Lope, G.T. and Satyanarayan, P. (2007) Chemical treatment of

natural fibre for use in natural fibre-reinforced composites: A review. Polymer

Environment 15(1): 25-33.

Yang, F., Li, G., He, Y.G., Ren, F.X. and Wang, J.X. (2009) Synthesis,

characterization, and applied properties of carboxymethyl cellulose and

polyacrylamide graft copolymer. Carbohydrate Polymer 78: 95-99.

Yea, J.H., Donga, J.J., Lub, J.L., Zhenga, X.Q., Jina, J., Chena, H. and

Lianga,Y.R. (2010) Effect of graft copolymerization of fir sawdust

lignocellulose with N-vinylpyrrolidone on adsorption capacity to tea

catechins. Carbohydrate Polymers 81: 441-447.

Yee, T.W., Rahman, W.A.W.A. and Sin, L.T (2011) properties and

morphology of poly(vinyl alcohol) blends with sago pith bio-filler as

biodegradable composites. Journal of Vinyl andAdditive Technology 17(3):

184-189.

Young, R., Rowell, R., Shulz, T.P. and Narayan R. (1992) Activation and

characterization of fiber surfaces for composites in emerging technologies for

materials and chemicals from biomass, Eds., American Chemical Society,

Washington D.C., 115.

Yun, Y.H., Youn, Y.N., Yoon, S.D. and Lee, J.U. (2012) Preparation and

physical properties of starch-based nanocomposite films with the addition of

titanium oxide nanoparticles. Journal of Ceramic Processing Research 13(1):

59-64

Zafeiropoulos, N.E., Williams, D.R., Biallie, C.A. and Matthews C.L. (2002)

Engineering and characterization of interface in flax fiber/polypropylene

composite material. Part I. development and investigation of surface

treatments. Composite A: Applied Science and Manufacturing 33:1083-1093.

Zahran, M.K., Rehan, M.F., and El-Rafie, M.H. (2005) Single bath full

bleaching of flax fibers using an activated sodium chlorite/hexamethylene

tetramine system. Journal of Natural Fibers 2: 49-67.