red•dot commercial rigid fittings commercial fittings and accessories e-562–e...
TRANSCRIPT
Red•Dot ® Commercial Rigid Fittings
In this section...
Red•Dot® Commercial Rigid Fittings
Conduit Bodies ...........................................................E-554–E-561
Fittings and Accessories .............................................E-562–E-564
www.tnb.comUnited StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289
E-554
Conduit Bodies
Cond
uit &
Fitt
ings
— R
ed•D
ot® C
omm
erci
al R
igid
Fitt
ings
Clean Cover Edges
Copper-Free Aluminum
Retained Deep Slotted Stainless
Steel Screws
Precision Machined Threads
Smooth Conduit Stops
Clear Markings
Cat. No.tradE
SizE (iN.) a (iN.) B (iN.)Std. CtN. Cat. No. HuB SizE (iN.)
Std. CtN.
aC-1-rd 1⁄2 37⁄8 121⁄64 50 D-PAK ® *aC-2-rd 3⁄4 45⁄8 117⁄32 50 daC-1-CG 1⁄2 12aC-3 1 53⁄8 13⁄4 25 daC-2-CG 3⁄4 15aC-4-rd 11⁄4 71⁄4 21⁄2 10 daC-3-CG 1 8aC-5 11⁄2 71⁄4 21⁄8 10 daC-4-CG 11⁄4 6aC-6-rd 2 91⁄2 31⁄2 5 daC-5-CG 11⁄2 5aC-7* 21⁄2 121⁄4 41⁄2 1 daC-6-CG 2 2aC-8* 3 121⁄4 41⁄2 1 daC-7-CG 21⁄2 2aC-9* 31⁄2 15 51⁄2 1 daC-8-CG 3 2aC-10-rd* 4 15 51⁄2 1 daC-9-CG 31⁄2 2
daC-10-CG 4 2 Shipped with cover. Price includes cost of cover and body. UL File No. E-28688.
• Fittings, covers and gaskets are interchangeable with those produced by other leading manufacturers
• Finish: Powder-coated urethane
Conduit Bodies, Covers and Gaskets — A SeriesC Style
BT
DAC-1-CG
AC-1-RD
A
B
Conduit Bodies, Covers and GasketsStandard Finish:Conduit bodies and die-cast covers: powder c oated
Stamped covers: Natural
Standard Materials:Conduit Bodies: Die-cast aluminum alloy A360 with less than .004% copper content (copper-free)
Covers: (CV Series) Die-cast aluminum alloy A360 with less than .004% copper content (copper-free), and stainless steel screws
Covers: (SCV Series) Stamped aluminum alloy with less than .004% copper content (copper-free), and stainless steel screws
Gaskets: (GKN Series) Neoprene
Gaskets: (GKV Series) Composition
Compliances:UL® Listed
CSA Certified
Federal Spec. W-C-586
NEC® Article 314.28
application• Junction for branch conduits —“A” Series bodies for Rigid
and IMC conduit maintain a weather-resistant conduit system when used with covers and gaskets
• “B” Series bodies for thin wall conduit (EMT) saves cost of connector and labor in indoor applications
• Spacious, accessible wiring chamber provides a convenient location to pull conductors and make splices
• Aluminum conduit bodies can be used with rigid metal conduit — NEC® 342 and 344, and Steel EMT, NEC® 358
Features/Benefits• Copper-free* aluminum provides increased corrosion
resistance
• Precision-cast and machined surfaces permit safer wire pulling
• Clean cover edges provide good gasket sealing
• Precision NPT threaded and set screw hubs enable trouble-free field installation for rigid, IMC or EMT conduit
• Retained deep-slotted stainless steel cover screws for faster installation
• Clear UL, CSA and cubic-content markings speed approval by inspectors
Sample Specifications:Conduit bodies shall be die-cast copper-free* aluminum alloy A360. All conduit stops shall be free of rough edges. Conduit bodies shall be finished with powder-coated paint. Conduit bodies shall be Red•Dot® Catalog No. _______________*Less than .004% copper content
ALB ALL
NEC and National Electrical Code are registered trademarks of the National Fire Protection Association, Inc.
United StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289www.tnb.com
E-555
Conduit Bodies
Conduit & Fittings —
Red•Dot® Com
mercial Rigid Fittings
Cat. No.HuB
SizE (iN.)Std. CtN.
D-PAK ® *daLB-1-CG 1⁄2 25daLB-2-CG 3⁄4 16daLB-3-CG 1 6daLB-4-CG 11⁄4 5daLB-5-C 11⁄2 5daLB-6-CG 2 2daLB-7-CG 21⁄2 2daLB-8-CG 3 2daLB-9-CG 31⁄2 2daLB-10-CG 4 2* Shipped with cover. Price includes cost of cover and body.
UL File No. E-28688.
Cat. No.HuB
SizE (iN.)Std. CtN.
D-PAK ® *daLL-1-CG 1⁄2 12daLL-2-CG 3⁄4 15daLL-3-CG 1 5daLL-4-CG 11⁄4 4daLL-5-CG 11⁄2 5daLL-6-CG 2 2daLL-7-CG 21⁄2 2daLL-8-CG 3 2daLL-9-CG 31⁄2 2daLL-10-CG 4 2* Shipped with cover. Price includes cost of cover and body.
UL File No. E-28688
• Die-cast copper-free aluminum construction
• Provide access for pulling, splicing and maintenance
• For rigid conduit/IMC applications
• UL Listed
Type ALL
Cat. No.tradE
SizE (iN.)a
(iN.)B
(iN.)Std. CtN.
aLL-1 1⁄2 37⁄8 2 50aLL-2 3⁄4 45⁄8 215⁄16 50aLL-3 1 53⁄8 21⁄2 25aLL-4 11⁄4 71⁄4 33⁄8 10aLL-5 11⁄2 71⁄4 33⁄8 10aLL-6 2 91⁄2 315⁄16 5aLL-7* 21⁄2 121⁄4 51⁄2 1aLL-8* 3 121⁄4 51⁄2 1aLL-9* 31⁄2 15 61⁄2 1aLL-10* 4 15 61⁄2 1
Cat. No.tradE
SizE (iN.)a
(iN.)B
(iN.)Std. CtN.
aLB-1 1⁄2 37⁄8 21⁄16 50aLB-2 3⁄4 45⁄8 27⁄16 50aLB-3 1 53⁄8 23⁄4 25aLB-4 11⁄4 71⁄4 39⁄16 10aLB-5 11⁄2 71⁄4 313⁄16 10aLB-6 2 91⁄2 41⁄2 5aLB-7* 21⁄2 121⁄4 51⁄4 1aLB-8* 3 121⁄4 57⁄8 1aLB-9* 31⁄2 15 615⁄16 1aLB-10* 4 15 615⁄16 1
A
B
Conduit Bodies, Covers and Gaskets — A Series (continued)LL Style
Type ALB
A B
LB Style
DALB-1-CG
DALL-1-CG
ALB-1
ALL-1
www.tnb.comUnited StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289
E-556
Conduit Bodies
Cond
uit &
Fitt
ings
— R
ed•D
ot® C
omm
erci
al R
igid
Fitt
ings
Type ALRL
A
B
LRL Style
Type AT
A
B
T Style
Conduit Bodies, Covers and Gaskets — A Series (continued)
Cat. No.Hub
SizE (iN.)
aE-1 1⁄2aE-2 3⁄4
Dead End• Retainedstainlesssteel
coverscrews
• CubiccapacityULandCSAclearlyshown
• Smooththroatsforeasywirepulling
• Ultra-highpressuredie-castcopper-freealuminum
• ULListed,CSACertified
• Die-castcopper-freealuminumconstruction
• Provideaccessforpulling,splicingandmaintenance
• Forrigidconduit/IMCapplications
• Fittings,coversandgasketsareinterchangeablewiththoseproducedbyotherleadingmanufacturers
• Finish:Powder-coatedurethane
Type ALR
A
B
LR Style
DALR-1-CG ALR-1
AT-1
ALRL-1
DAT-1-CG
Cat. No.tradE
SizE (iN.)a
(iN.)b
(iN.)Std. CtN.
aLrL-1 1⁄2 37⁄8 2 50aLrL-2 3⁄4 45⁄8 215⁄16 50aLrL-3 1 53⁄8 21⁄2 25aLrL-4 11⁄4 71⁄4 33⁄8 10aLrL-5 11⁄2 71⁄4 33⁄8 10aLrL-6 2 91⁄2 315⁄16 5* Threaded and shipped with cover. Price includes cost
of cover and body.UL File No. E-28688.
Cat. No.tradE SizE
(iN.)a
(iN.)b
(iN.)Std. CtN. Cat. No.
Hub SizE (iN.)
Std. CtN.
aLr-1 1⁄2 37⁄8 2 50 D-PAK ® *aLr-2 3⁄4 45⁄8 215⁄16 50 daLr-1-CG 1⁄2 12aLr-3 1 53⁄8 21⁄2 25 daLr-2-CG 3⁄4 15aLr-4 11⁄4 71⁄4 33⁄8 10 daLr-3-CG 1 5aLr-5 11⁄2 71⁄4 33⁄8 10 daLr-4-CG 11⁄4 4aLr-6 2 91⁄2 315⁄16 5 daLr-5-CG 11⁄2 4aLr-7* 21⁄2 121⁄4 51⁄2 1 daLr-6-CG 2 2aLr-8* 3 121⁄4 51⁄2 1 daLr-7-CG 21⁄2 2aLr-9* 31⁄2 15 61⁄2 1 daLr-8-CG 3 2aLr-10* 4 15 61⁄2 1 daLr-9-CG 31⁄2 2* Threaded and shipped with cover. Price includes cost
of cover and body. UL File No. E-28688.
daLr-10-CG 4 2UL Listed.
Cat. No.tradE SizE
(iN.)a
(iN.)b
(iN.)Std. CtN. Cat. No.
Hub SizE (iN.)
Std. CtN.
at-1 1⁄2 37⁄8 21⁄16 50 D-PAK ® *at-2 3⁄4 45⁄8 211⁄32 50 dat-1-CG 1⁄2 12at-3 1 53⁄8 25⁄8 25 dat-2-CG 3⁄4 14at-4 11⁄4 71⁄4 317⁄32 10 dat-3-CG 1 5at-5 11⁄2 71⁄4 317⁄32 10 dat-4-CG 11⁄4 5at-6 2 91⁄2 4 5 dat-5-CG 11⁄2 5at-7* 21⁄2 121⁄4 525⁄32 1 dat-6-CG 2 2at-8* 3 121⁄4 525⁄32 1 dat-7-CG 21⁄2 2at-9* 31⁄2 15 613⁄16 1 dat-8-CG 3 2at-10* 4 15 613⁄16 1 dat-9-CG 31⁄2 2* Threaded and shipped with cover. Price includes cost
of cover and body. UL File No. E-28688.
dat-10-CG 4 2UL Listed.
United StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289www.tnb.com
E-557
Conduit Bodies
Conduit & Fittings —
Red•Dot® Com
mercial Rigid Fittings
Cat. No.tradE
SizE (iN.)a
(iN.)b
(iN.)Std. CtN.
bC-1-rd 1⁄2 37⁄8 121⁄64 50bC-2-rd 3⁄4 45⁄8 117⁄32 50bC-3 1 53⁄8 13⁄4 25bC-4 11⁄4 71⁄4 21⁄2 10bC-5 11⁄2 71⁄4 21⁄2 10bC-6 2 91⁄2 31⁄8 5UL File No. E-28688.
Cat. No.tradE
SizE (iN.)a
(iN.)b
(iN.)Std. CtN.
bLrL-1 1⁄2 37⁄8 2 50bLrL-2 3⁄4 45⁄8 215⁄16 50bLrL-3 1 53⁄8 21⁄2 25bLrL-4 11⁄4 71⁄4 33⁄8 10bLrL-5 11⁄2 71⁄4 33⁄8 10bLrL-6 2 91⁄2 315⁄16 5Shipped with cover. Price includes cost of cover and body. UL File No. E-28688.
Cat. No.tradE
SizE (iN.)a
(iN.)b
(iN.)Std. CtN.
bLL-1 1⁄2 37⁄8 2 50bLL-2 3⁄4 45⁄8 25⁄16 50bLL-3 1 53⁄8 21⁄2 25UL File No. E-28688.
Cat. No.tradE
SizE (iN.)a
(iN.)b
(iN.)Std. CtN.
bLr-1 1⁄2 37⁄8 2 50bLr-2 3⁄4 45⁄8 25⁄16 50bLr-3 1 53⁄8 21⁄2 25UL File No. E-28688.
Type BC
Type BLB
A
B
A B
C Style
LB Style
Aluminum Conduit Bodies, Covers and Gaskets — B Series
Type BLR
Type BLL
LR Style
LL Style
Type BLRL
A
BLRL Style
BC-1-RD BLL-1
BLB-1 BLR-1
A
A
B
B
d-PaK® *
Cat. No.tradE
SizE (iN.)Std. CtN.
dbLb-1-C* 1⁄2 25dbLb-2-C* 3⁄4 16dbLb-3-C* 1 6* Threaded Hubs shipped with cover. Price includes cost of cover and body.
UL File No. E-28688.
Cat. No.tradE
SizE (iN.) a (iN.) b (iN.)Std. CtN.
bLb-1 1⁄2 37⁄8 21⁄16 50bLb-2 3⁄4 45⁄8 27⁄16 50bLb-3 1 53⁄8 23⁄4 25bLb-4 11⁄4 71⁄4 39⁄16 10bLb-5 11⁄2 71⁄4 313⁄16 10bLb-6 2 91⁄2 41⁄2 5bLb-7* 21⁄2 121⁄4 51⁄4 1bLb-8* 3 121⁄4 57⁄8 1bLb-9* 31⁄2 15 615⁄16 1bLb-10* 4 15 615⁄16 1
www.tnb.comUnited StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289
E-558
Conduit Bodies
Cond
uit &
Fitt
ings
— R
ed•D
ot® C
omm
erci
al R
igid
Fitt
ings
Neoprene Gasket
Fiber Gasket
• CV=Die-castaluminum
• SCV=Stampedaluminum
• Steelzinc-platedscrews
Aluminum Covers with Stainless Steel Screws
Gaskets — Composition
Gaskets — Neoprene• Fiberorneoprenematerial
Type BT
A
B
Aluminum Conduit Bodies, Covers and Gaskets — B Series (continued)
T Style
BT-1
Cat. No.tradE
SizE (iN.) a (iN.) B (iN.)Std. CtN.
Bt-1 1⁄2 37⁄8 21⁄16 50Bt-2 3⁄4 45⁄8 211⁄32 50Bt-3 1 53⁄8 25⁄8 25Bt-4 11⁄4 71⁄4 317⁄32 10Bt-5 11⁄2 71⁄4 317⁄32 10Bt-6 2 91⁄2 4 5Bt-7* 21⁄2 121⁄4 525⁄32 1Bt-8* 3 121⁄4 525⁄32 1Bt-9* 31⁄2 15 613⁄16 1Bt-10* 4 15 613⁄16 1* Threaded Hubs shipped with cover. Price includes cost of cover and body.
UL File No. E-28688.
Cat. No.CoNduit SizE (iN.)
Std. CtN.
CV-1 1⁄2 250CV-2 3⁄4 250CV-3 1 250CV-4 11⁄4–11⁄2 50CV-5 2 25CV-6 21⁄2–3 5CV-7 31⁄2–4 5SCV-1 1⁄2 250SCV-2 3⁄4 250SCV-3 1 250SCV-4 11⁄4–11⁄2 250SCV-5 2 100UL File No. E-28688
Cat. No.CoNduit SizE (iN.)
Std. CtN.
GKN-1 1⁄2 100GKN-2 3⁄4 50GKN-3 1 25GKN-4 11⁄4–11⁄2 25GKN-5 2 25GKN-6 21⁄2–3 5GKN-7 31⁄2–4 5
Cat. No.CoNduit SizE (iN.)
Std. CtN.
GKV-1 1⁄2 100GKV-2 3⁄4 50GKV-3 1 25GKV-4 11⁄4–11⁄2 25GKV-5 2 25GKV-6 21⁄2–3 5GKV-7 31⁄2–4 5
United StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289www.tnb.com
E-559
Conduit Bodies
Conduit & Fittings —
Red•Dot® Com
mercial Rigid Fittings
A
C
C E T
SizE(iN.)
dimENSioNS (iN.)
Cia B C d E F G1⁄2 37⁄8 43⁄8 1 13⁄8 213⁄32 21⁄16
13⁄16 4.33⁄4 45⁄8 51⁄8 117⁄32 15⁄8 225⁄32 211⁄32
15⁄16 7.31 53⁄8 515⁄16 13⁄4 17⁄8 31⁄2 25⁄8 1 11.811⁄4 71⁄4 77⁄8 21⁄2 21⁄2 43⁄16 317⁄32 13⁄8 32.011⁄2 71⁄4 77⁄8 21⁄2 23⁄4 43⁄16 317⁄32 11⁄2 32.02 91⁄2 103⁄16 31⁄8 39⁄16 513⁄32 4 1 69.521⁄2 121⁄4 13 41⁄2 41⁄2 67⁄8 525⁄32 27⁄16 190.03 121⁄4 13 41⁄2 41⁄2 67⁄8 525⁄32 27⁄16 190.031⁄2 15 165⁄16 51⁄2 59⁄16 813⁄16 613⁄16 3 366.04 15 165⁄16 51⁄2 59⁄16 813⁄16 613⁄16 3 366.0
SizE(iN.)
dimENSioNS (iN.)
Cia B C d E F1⁄2 37⁄8 49⁄32 15⁄16 15⁄16 31⁄2 21⁄16 4.33⁄4 45⁄8 51⁄8 117⁄32 15⁄8 41⁄4 27⁄16 7.31 53⁄8 515⁄16 13⁄4 17⁄8 415⁄16 23⁄4 11.811⁄4 71⁄4 77⁄8 21⁄2 21⁄2 61⁄2 39⁄16 32.011⁄2 71⁄4 77⁄8 21⁄2 23⁄4 65⁄16 313⁄16 32.02 91⁄2 913⁄16 31⁄8 37⁄16 8 41⁄2 69.521⁄2 121⁄4 13 41⁄2 37⁄8 1027⁄32 51⁄4 190.03 121⁄4 13 41⁄2 41⁄2 101⁄2 57⁄8 190.031⁄2 15 165⁄16 51⁄2 59⁄16 131⁄2 615⁄16 366.04 15 165⁄16 51⁄2 59⁄16 131⁄2 615⁄16 366.0
tradE SizE (iN.) LB C t LL, Lr, LrL3⁄4 #6 AWG #6 AWG #6 AWG #6 AWG1 #4 AWG #4 AWG #4 AWG #4 AWG11⁄4 #2 AWG #2 AWG #2 AWG #2 AWG11⁄2 1/0 AWG 1/0 AWG #1 AWG 1/0 AWG2 4/0 AWG 2/0 AWG 1/0 AWG 4/0 AWG21⁄2 300 kcmil 250 kcmil 2/0 AWG 300 kcmil3 400 kcmil 250 kcmil 2/0 AWG 500 kcmil31⁄2 500 kcmil 350 kcmil 250 kcmil 500 kcmil4 500 kcmil 350 kcmil 250 kcmil 500 kcmil*The maximum number and size of wire that can be safely pulled is based on three type XHHW wires or equal.
SizE(iN.)
dimENSioNS (iN.)
Ci Ci
LrL StyLEoNLya B C d E F G H
1⁄2 37⁄8 31⁄2 45⁄16 15⁄16 13⁄8 39⁄16 2 25⁄32 4.3 4.8 —3⁄4 45⁄8 41⁄8 51⁄8 117⁄32 15⁄8 41⁄8 25⁄16
7⁄8 7.3 7.5 —1 53⁄8 47⁄8 55⁄16 13⁄4 17⁄8 47⁄8 21⁄2 1 11.8 12.5 —11⁄4 71⁄4 61⁄2 77⁄8 21⁄2 23⁄4 65⁄16 33⁄8 11⁄2 32.0 36.5 —11⁄2 71⁄4 61⁄2 77⁄8 21⁄2 23⁄4 65⁄16 33⁄8 11⁄2 32.0 36.5 —2 91⁄2 89⁄16 103⁄16 31⁄8 37⁄16 83⁄16 315⁄16 115⁄16 69.5 73.8 —21⁄2 121⁄4 111⁄4 13 41⁄2 41⁄2 101⁄4 51⁄2 27⁄8 190.0 — —3 121⁄4 111⁄4 13 41⁄2 41⁄2 101⁄4 51⁄2 27⁄8 190.0 — —31⁄2 15 147⁄16 161⁄4 51⁄2 51⁄2 123⁄4 61⁄2 3 366.0 — —4 15 147⁄16 161⁄4 51⁄2 51⁄2 123⁄4 61⁄2 3 366.0 — —
LL LR
OpenThru
LRL
B
DF
E
LL, LR & LRL
AB
DG
CF
HE
C, E and T Dimensions
LL, LR and LRL Dimensions
AB
CF
C E
GD
C, E & T
Conduit Body Wiring Table* — Style of Fitting
LB Dimensions
www.tnb.comUnited StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289
E-560
Conduit Bodies
Cond
uit &
Fitt
ings
— R
ed•D
ot® C
omm
erci
al R
igid
Fitt
ings
Spacious, accessible wiring chamber for pulling conductors, making splices and bringing electrical service into a location.
• Domecover—extrabendingroom
• Deep-slottedstainlesssteelcoverscrews
• “I”beamconstructionaddsstrength
• Smooththroatsforeasywirepulling
• Extrawiringroom
•MeetsNEC®Section314.28
• Ultra-highpressuredie-castaluminum
• UL®Listed,CSACertified
• Copper-freealuminum,lessthan.004%coppercontent
MALB-6
Application• Raintightjunctionforbringingelectricalserviceintoalocation
• Accessiblewiringchamberprovidesaconvenientlocationtopullconductorsandmakesplices
Features/Benefits• Copper-free*aluminumprovidesincreasedcorrosionresistance
• Precision-castandmachinedsurfacespermitsaferwirepulling
• Cleancoveredgesprovidegoodgasketsealing
• PrecisionNPTthreadedhubsenabletrouble-freefieldinstallationforrigidandIMCconduit
• Retaineddeep-slottedstainlesssteelcoverscrewsforfasterinstallation
• ClearUL®,CSAandcubiccontentmarkingsspeedapprovalbyinspectors
Smooth conduit stops Copper-free
aluminum
Clean cover edges
Complete with cover and gasket
Precision machined threads
Retained deep slotted
screwsMounts flush to the wall
Clear markings
Mogul Pulling Elbow/Service Entrance Bodies
ASLB-XL
Aluminum Mogul Pulling Elbows
ASLB-1
Standard Materials:Service Entrance Bodies: Die-cast aluminum alloy A360 with less than .004% copper content (copper-free)
Covers 1⁄2" and 3⁄4": Stamped aluminum alloy and stainless steel screws
Covers 1" through 4": Die-cast aluminum alloy A360 with less than .004% copper content (copper-free) and stainless steel screws
Gaskets: Composition
Standard Finish:Powder-coated gray
Compliances:UL® Listed
CSA Certified
Federal Spec. W-C-586
NEC® Section 314.28
Sample Specifications: Service Entrance Fittings shall be die-cast copper-free* aluminum alloy A360. All conduit stops shall be free of rough edges. Service Entrance Fittings shall be finished with aluminum lacquer. Service Entrance Fittings shall be Red•Dot® Catalog No. _________*Less than .004% copper content
Bodies with Covers and Gaskets
CAt. No.HuB SizE
uNit Qty.
Std. PkG.
Wt. lBS. PEr 100
MAlB-3 1" 1 10 174MAlB-4 11⁄4" 2 10 160MAlB-5 11⁄2" 1 1 400MAlB-6 2" 1 1 375MAlB-7 21⁄2" 1 1 1100MAlB-8 3" 1 1 1060MAlB-9 31⁄2" 1 1 1900MAlB-10 4" 1 1 1800
replacement Covers and GasketsCovEr CAt. No.
GASkEt CAt. No.
HuB SizE
uNit Qty.
Std. PkG.
Wt. lBS. PEr 100
— MGkv-5 11⁄4" 1 5 4MAlB-56Cv MGkv-5 11⁄2" to 2" 1 5 4MAlB-78Cv MGkv-6 21⁄2" to 3" 1 5 5MAlB-90Cv MGkv-7 31⁄2" to 4" 1 5 5
United StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289www.tnb.com
E-561
Conduit Bodies
Conduit & Fittings —
Red•Dot® Com
mercial Rigid Fittings
21⁄2"–4" Bodies with Covers and Gaskets CAt. No. HuB SizE (iN.)
SAlB-7 21⁄2SAlB-8 3SAlB-9 31⁄2SAlB-10 4
d-PAk® *CAt. No. HuB SizE (iN.)
dASlB-1 1⁄2dASlB-2 3⁄4dASlB-3 1* Cover only.
SALB
ASLB
Extra-long Bodies with Covers and GasketsCAt. No. HuB SizE (iN.) CovEr oNly
ASlB-Xl4 11⁄4 ASLBXL4CV*ASlB-Xl6 2 ASLBXL6CV*Note: Raintight when used with appropriate Red•Dot® covers.
1⁄2"–2" Bodies with Covers and GasketsCAt. No. HuB SizE (iN.) CovEr oNly
ASlB-1 1⁄2 ASLB1CVASlB-2 3⁄4 ASLB2CVASlB-3 1 ASLB3CVASlB-4 11⁄4 ASLB4CVASlB-5 11⁄2 ASLB5CVASlB-6 2 ASLB6CV
Service Entrance Fittings
Accessible junctions for bringing electrical service into a location.
•Mountsflushtowall
•Standardandextra-longconfigurations
•Retaineddeep-slottedstainlesssteelcoverscrews
•Smooththroatsforeasywirepulling
•Ultra-highpressuredie-castaluminum
•MeetsNEC®Article370-28
•UL®Listed,CSACertified
•Copper-freealuminum,lessthan.004coppercontent
AB
DE
F
C
SALB
F
C
G ED
BA
MALB
AB
GED
F
C
ASLB and ASLB-XL Dimensions
SALB and MALB Dimensions
DASLB-1
ASLB-1
ASLB & ASLB-XL
SizE(iN.)
diMENSioNS (iN.)
CiA B C d E F
ASLB1⁄2 31⁄16 23⁄4 11⁄4 19⁄16 11⁄8 11⁄16 2.03⁄4 315⁄16 31⁄4 11⁄2 13⁄4 13⁄8 3⁄4 3.01 41⁄4 37⁄8 13⁄4 23⁄16 13⁄4 11⁄16 5.511⁄4 51⁄2 51⁄4 23⁄8 3 23⁄16 11⁄4 13.011⁄2 61⁄4 6 27⁄16 31⁄4 27⁄16 11⁄2 18.82 63⁄4 61⁄2 31⁄8 4 27⁄8 15⁄8 38.8ASLB-XL11⁄4 8 71⁄2 21⁄2 23⁄4 27⁄32 15⁄16 24.52 915⁄16 93⁄4 33⁄8 33⁄4 215⁄16 15⁄8 58.0
SizE(iN.)
diMENSioNS (iN.)
CiA B C d E F G
SALB21⁄2 13 125⁄8 413⁄16 41⁄2 33⁄8 21⁄4 57⁄8 1903 13 125⁄8 41⁄2 51⁄4 41⁄8 27⁄16 67⁄16 19031⁄2 161⁄2 153⁄8 51⁄2 61⁄4 51⁄8 23⁄4 79⁄16 3664 161⁄2 153⁄8 51⁄2 61⁄4 51⁄8 23⁄4 79⁄16 366MALB1 95⁄8 91⁄16 21⁄2 23⁄4 21⁄16 81⁄2 35⁄8 4011⁄4 95⁄8 91⁄16 21⁄2 23⁄4 21⁄16 81⁄2 35⁄8 4011⁄2 1417⁄32 141⁄4 23⁄4 4 213⁄16 13 57⁄32 1282 1417⁄32 141⁄4 23⁄4 4 213⁄16 13 57⁄32 12821⁄2 2117⁄32 2119⁄32 41⁄2 55⁄8 41⁄8 18 723⁄32 3983 2117⁄32 2119⁄32 41⁄2 55⁄8 41⁄8 18 723⁄32 39831⁄2 285⁄8 2817⁄32 51⁄2 61⁄2 51⁄8 24 923⁄32 766.74 285⁄8 2817⁄32 51⁄2 61⁄2 51⁄8 24 923⁄32 766.7
www.tnb.comUnited StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289
E-562
Fittings and Accessories
Cond
uit &
Fitt
ings
— R
ed•D
ot® C
omm
erci
al R
igid
Fitt
ings
ES
6" Slab 4" Slab
ESL
Threaded Rigid/IMC Conduit InsertsConcrete slab inserts permit in-slab ceiling drops and floor mounts in poured concrete.
• ForRigidandIMC
• Slabinsertisnailedtoformpriortopour
• Removablesealkeepsthreadscementfree
• ESLeliminates:
—Bendsin4"concreteslabs
—Damagetoform
—Cuttingoffconduitstubs
• UL®Listed,CSACertified
Cat. No. Hub SizE (iN.)
StraightES-1 1⁄2ES-2 3⁄4ES-3 190°ESL-1 1⁄2ESL-2 3⁄4ESL-3 1
Conduit running in a cement slab is attached to a 90° concrete slab insert or conduit is bent 90° and is threaded to a straight insert. Nail or screw fitting to wood or metal forms. After concrete is poured and forms stripped, conduit drops quickly into fittings from floor below. Drops are easily measured from ceiling line to switch or outlet height and cut in uniform lengths.
Conduit running in a cement slab is bent 90° to run through a hole drilled in the form. Drilling takes time and damages the form. Stripping form often damages conduit stubs. Varying length of stubs requires individual measuring and cutting of conduit drops.
ESL
4" Slab
Red•Dot® Way
ES
6" Slab
ESL
ES
Zinc Concrete Slab Inserts, Elbows and Plugs
Old Way
application• Permitsin-slabceilingdropsandfloormountsinpouredconcrete
• Providesflushthreadedconduithubformounting,pullingandfutureaccesstoconduitsystems
• Designpermitsprefabricationofin-slabconduitsystem
Features/benefits• Flushdesignleavesnobrokenorbentstubsforeasyremovalofundamagedforms
• Flushdesignpermitssimplifiedin-slabwork
• Flushdesignleavesaneat,unclutteredjob
• OfferedinstraightESconfigurationforstraight-throughconduitrunsandmountingoffloorboxesinslabsover6"thick
• OfferedinESLconfigurationtoeliminatebendingofconduitinslabsover4"thick
• Precision-castandmachinedsurfacespermitsaferwirepulling
• ZAMAK3Zinccanbeembeddedinconcrete
Standard Material:Die-cast zinc alloy ZAMAK 3. Certified by the Certified Zinc Alloy Plan (CZAP)
Standard Finish:
Natural
Compliances:UL® Listed
CSA Certified
Sample Specifications:Concrete Slab Inserts shall be die-cast Zinc Alloy* ZAMAK 3. All conduit stops shall be coined and free of rough edges. Service Entrance Fittings shall be Red•Dot® Catalog No. _______________* Certified by the American Die Casting Institute
United StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289www.tnb.com
E-563
Fittings and Accessories
Conduit & Fittings —
Red•Dot® Com
mercial Rigid Fittings
Elbows and Plugs
Cat. No.
SizE(iN.)
DiMENSioNS (iN.)
a b C D E F G
ESL-1 1⁄2 427⁄32 345⁄64 329⁄32 33⁄16 17⁄8 11⁄321⁄4
ESL-2 3⁄4 511⁄16 323⁄32 41⁄8 33⁄32 21⁄8 11⁄4 1⁄4ESL-3 1 55⁄32 33⁄4 315⁄16 263⁄64 27⁄16 117⁄32
1⁄4
Cat. No.SizE(iN.)
DiMENSioNS (iN.)
a b C D E
ES-1 1⁄2 119⁄16 19⁄16 123⁄32 11⁄321⁄4
ES-2 3⁄4 211⁄64 15⁄8 131⁄32 11⁄4 1⁄4ES-3 1 29⁄16 2 25⁄16 117⁄32
1⁄4
SizE(iN.)
DiMENSioNS (iN.)
a b C1⁄2 11⁄16
7⁄32 11⁄83⁄4 13⁄16
9⁄16 123⁄64
SizE(iN.)
DiMENSioNS (iN.)
a b1⁄2 23⁄8 11⁄83⁄4 221⁄32 15⁄16
Cat. No. Cat. No.Hub
SizE (iN.)
Corner Rigid IMC EMTaCE-1 bCE-1 1⁄2aCE-2 bCE-2 3⁄4Pulling Rigid IMC EMTaPEF-1 bPEF-1 1⁄2aPEF-2 bPEF-2 3⁄4
Female-to-Female Aluminum Elbows
ES Dimensions
ACE and BCE Dimensions
APEF and BPEF Dimensions
APEF
AB
A
C
BPEF
AB
C
A
ACE BCE
A
B
A
B
ES
E
D
B
C
A
ESL
BD
F
CAEG
BCE
BPEF
ESL Dimensions
www.tnb.comUnited StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289
E-564
Fittings and Accessories
Cond
uit &
Fitt
ings
— R
ed•D
ot® C
omm
erci
al R
igid
Fitt
ings
Certificates of Compliance are now available online for the American Recovery and Reinvestment Act of 2009.
★ Determine whether a T&B product meets the Buy American requirements of the ARRA.
★ There are three ways to search for compliance information: 1. Enter a catalog number 2. Copy and paste a list of catalog numbers 3. Upload an entire spreadsheet of catalog numbers
★ Print a Certificate of Compliance on the spot!
Three easy steps to access the site: 1. Go to www.tnb.com 2. Click the Electrical World icon 3. Click the “ARRA Stimulus” link
from the “Subject Index” menu