RED RHINO 7000 SERIES MINI CRUSHER

TECHNICAL SPECS Crusher: Single toggle jaw crusher, 14% manganese steel

reversible Jaws.

Engine: Deutz 74hp air cooled diesel.

Fuel Consumption: Approximately 10 litres per hour (at 50kw/2300rpm).

Chassis: Hydraulic steel tracks.

Jaw Aperture: 700mm x 400mm

Output: 45t per hour has been achieved.

Fuel Capacity: 90 litres.

Output Size: Instant hydraulic adjustment, choice of 20mm–140mm.

Control System: Dual remote control and umbilical cord for all functions.

Unique: Hydraulic reversible jaw action, reversible jaw plates

(2 “lives”).

It can crush a full UK kerbstone in under 10 seconds.

Options: Conveyor mounted screener attachment

Overband magnet.

Hydraulic breaker circuit

DIMENSIONS

Length: 6700mm

Width: 2200mm

Total Height: 2720mm

Loading Height: 2720mm

Weight: 10,000kgs (subject to specification)

RED RHINO 7000 SERIES MINI CRUSHER

Red Rhino Crushers (UK) Ltd, Alma Park Road, Alma Park Industrial Estate, Grantham, Lincs. NG31 9SE

Tel: 01476 590 790 Fax: 01476 593 821 Email: info@redrhinocrushers.com

Description: Single toggle jaw crusher with a jaw aperture of 700mm x 400mm – this crusher will crush a

full UK kerbstone in approximately 10 seconds. The 7000 series is 2200mm wide and a has a loading height of

2720mm. This machine will provide significant daily tonnage where a larger machines is too bulky or noisy.

The 7000 series will produce an output size ranging from 20mm up to 140mm.

Material: The 7000 series will crush concrete, kerbstone, marble, paving slabs, bricks, tiles, blocks, stone, porcelain, flint,

gravestones, glass, etc.

Output: Output will vary according to jaw setting, loading method, loading equipment, input material and familiarity of

the loading operator. In excess of 45t per hour has been achieved.

Jaws: The hydraulic adjustment/reverse lever allowing for the quick release of jammed material and adjustment

Of output product size.

Further safety features are fitted as standard. Jaw plates are made of 14% manganese steel which will „work-

harden. The jaws are reversible meaning that they have „2 lives‟.

Reinforced Concrete & Steel: For reinforced concrete it is recommended that you protect your conveyor belt and crush this material having

removed the conveyor belt.

Engine: The engine is a Deutz 74hp air cooled diesel set at 2,300rpm.

The fuel tank capacity is 90 litres, with a fuel consumption of approximately 10 litres per hour.

Tracks & Controls: Tracks are steel and controlled by a remote control for safe loading, unloading and tracking. Controls are

simple and clearly labelled. A hydraulic oil cooler is fitted to ensure longer life of all hydraulic equipment

Conveyor & Dust Suppression: Dust suppression is fitted as standard and is by means of fine water spray nozzles, utilising standard domestic

hose pressure. The output conveyor is simple in design with a moulded belt providing strength and durability.

Loading: Maximum productivity is achieved by correct loading of the crusher.

Optimum tonnage per hour is achieved by positioning the excavator directly in-line with the rear of the machine,

and that the excavator operator has a clear line of sight with the jaw.

Screener: An optional conveyor mounted screener is available for the separation of dust and topsoil from the crushing

process. Supplied with a 10mm mesh, the screener can also assist with the creation of decorative aggregates.

Safety & Maintenance: There are two emergency stop buttons located to either side of the machine, and the front inspection covers are

fitted with a cut-off switch. The engine cover is lockable and a central greasing point is fitted. Service intervals

are every 250 hours.

WATCH THE VIDEOS ON WWW.REDRHINOCRUSHERS.COM

Hydraulic jaw adjustment

(Choice of output size

20mm-140mm) 700mm x 400mm jaw aperture

Hydraulic reversible jaw

action

Powerful 74hp Deutz air

cooled diesel engine

Electric start with clear and

simple hydraulic controls.

Dust suppression fitted

as standard.

Up to 45t/hour output.

Additional options for

Screeners, hydraulic

breakers, magnets Single toggle jaw crusher with

14% manganese steel

‘reversible’ jaw plates.

Full radio controlled system