Red•Dot ®

Cat. No. Color Description

Single Receptacle Cover, vertical - 1.59" Opening

CCSV-TL Silver Device mount

IntegralLocking

Hasp

Motor base plug and cover, horizontal

CCMB Silver Device mount15A-125Vmotor base

plug

Switch cover only

CCT Silver Device mountswitch coveronly, packed with spacersand screws

Switch cover with switch

CCT-1 Silver Single pole 15A, 125VCCT-1-20 Silver Single pole 20A, 120-277VCCT-2-20 Silver Double pole 20A, 120-277V

All with spacers and screwsCCT-3 Silver 3-way switch 15A, 125V

Single Gang Lampholder CoversCat. No. Cat. No. Size Description

Standard Jumbo(2m" x 4d") (3a" x 5a")LC-11 LF11 d" One hole

Device mount.LC-21 ___ d" Two holes.

Device mount.LC-31 LF31 d" Three holes.

Device mount.

D-PAK® *

Cat. No. Color Size Description

DLC-31 Silver d" Three holesDevice mount

DLC-31-BR Bronze d" Three holesDevice mount

DLC-31-WH White d" Three holes.Device mount

NOTE: Raintight when used with appropriate Red•Dot® boxes• All covers packed with gasket and screws* See pages 47-49 for complete D-PAK® assortment

LC-11

LC-31

LC-21

Dry-tite® Single Gang Covers

Single Gang Device CoversCat. No. Color Description

Duplex receptacle cover, horizontal

CCD Silver Device mount

D-PAK® *

DCCD Silver Device mountDCCD-BR Bronze Device mountDCCD-WH White Device mountDCCDSO Silver Device mount stay openDCCDSO-BR Bronze Device mount stay openDCCDSO-WH White Device mount stay open

Duplex receptacle cover, vertical

CCDV Silver Device mountCCDV-L Silver Device mount

with lock option

D-PAK® *DCDV Silver Device mountDCDV-BR Bronze Device mountDCDV-WH White Device mount

GFCI receptacle cover, horizontal

CCG Silver Device mount

D-PAK® *

DCCG Silver Device mountDCCG-BR Bronze Device mountDCCG-WH White Device mount

GFCI receptacle cover, vertical

CCGV Silver Device mountCCGV-L Silver Device mount

with lock option

D-PAK® *

DCGV Silver Device mountDCGV-BR Bronze Device mountDCGV-WH White Device mount

Single receptacle cover, horizontal - 1.485" Diameter Opening

CCS Silver Device mount

Single receptacle cover, vertical - 1.59" Diameter Opening

CCSV Silver Device mountCCSV-L Silver Device mount

with lock optionCCPO Silver Power outlet

cover with 2.156"diameter opening.

Box mount.

Single Gang GasketsCat. No. Color Description

CCK Black NeopreneCCSK Black Neoprene

© 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com 21

NEW

312058.01 8/8 8/9/02 10:00 AM Page 21

Red•Dot ®

Applications:

• Dry-tite® boxes and covers protect wiring devices, switches,electronic components, and terminal blocks in Dry, Damp andWet Locations.

• Accessible wiring chamber provides a convenient location tomaintain or change a system, pull conductors and make splices.

• Junction box for branch conduits.

Features/Benefits:

• Alloy A380 aluminum, certified zinc alloy, and stainless steelsprings provide increased corrosion resistance.

• Die cast construction and industrial design combine to producea rugged protective enclosure for devices on many applications.

• Clean cover edges provide good gasket sealing.• Precision cast and machined surfaces permit safer wire pulling.• Clear UL and cubic content markings speed approval by

inspectors.• Convenient mounting lugs for a variety of mounting methods.• Securely fastened mounting plates reduce costly call backs.

Standard Materials:

• Boxes: Die cast aluminum alloy A380.• Cover Plates: Stamped aluminum alloy or certified die cast zinc

alloy ZAMAK 3.• Cover Lids: Certified die cast zinc alloy ZAMAK 3.

Standard Finish:

• Aluminum lacquer finish.

Compliances:

• UL Listed.• Boxes: CSA Certified with factory installed ground screw.**• Covers: CSA Certified.• Covers suitable for use in Wet Locations with covers closed.• CCB and CCT series covers suitable for use in Wet Locations.• Federal Spec. W-C-586.• NEMA 3R Rated.

Sample Specifications:

• Universal device boxes and covers shall be of aluminum alloyA380 and certified zinc alloy. All conduit stops shall be free ofrough edges. Covers shall have stainless steel springs. Coversshall be finished with aluminum lacquer. Universal deviceboxes And covers shall be Red•Dot® Catalog No. ____________

**Consult factory for lead time and minimum quantity.

IH3-1-LM 2IH5-1 CCD 2CCTS

Securelyfastenedmountingplates

Corrosionresistantmetal

Stainlesssteel springs

Clear markingPrecisionmachinedthreads

Groundscrew

Clean coveredges

Dry-tite® Universal Boxes

18 © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

312058.01 8/8 8/9/02 10:00 AM Page 18

Red•Dot ®

CCD CCDV AND CCGV CCT CCB

CCG CCS CCSV CCMB Typical FS MountHole Pattern

2CCSD and 2CCSG 2CCTD 2CCB

2CCD & 2CCG2CCS3CCB

Two and Three Gang Covers

2CCT 2CCTS 2CCTG-FSTypical FS Mount

Hole Pattern

Single Gang Covers

Dry-tite® Universal Boxes

24 © 2002 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

312058.01 8/8 8/9/02 10:01 AM Page 24